diff --git a/docs/architecture/terminals.md b/docs/architecture/terminals.md
index f0ab541..924a7e9 100644
--- a/docs/architecture/terminals.md
+++ b/docs/architecture/terminals.md
@@ -109,6 +109,30 @@ keyboard driver names it and stops.
 Input goes to whichever terminal is on screen. That is what makes a terminal a
 terminal: the keyboard follows the eyes.
 
+## Two rules that are easy to get wrong
+
+**The grid is the only source of truth for the size.** `TIOCGWINSZ` reports
+`v->cols`/`v->rows`, not a fresh `gfx_cols()`/`gfx_rows()`. When it computed
+its own answer there were two, and they disagreed: the grids are sized at
+`vt_init()`, which runs before the display driver is found on the PCI bus, so
+they were 80x24 while `TIOCGWINSZ` said 160x50. Text stopped two thirds of the
+way down the screen, `ls` formatted for a width the grid did not have and split
+words across the wrap, and zsh's cursor tracking was wrong on every line --
+three symptoms, one disagreement. `vt_resize()` now corrects the grids when a
+scanout arrives, and the ioctl reads them.
+
+**A glyph in the last column does not wrap.** It sets `wrap_pending`, and the
+wrap happens when the *next* glyph arrives. Every real terminal behaves this
+way and none of them document it clearly. Wrapping immediately makes a line
+exactly as wide as the screen take two rows instead of one, and makes it
+impossible to write the bottom-right cell without scrolling -- and zsh's
+partial-line marker depends on the rule directly: it writes exactly
+`COLUMNS - 1` spaces and expects the cursor to still be on that line. With
+immediate wrap, a reverse-video `#` appeared above every prompt.
+
+Anything that moves the cursor deliberately -- CR, LF, backspace, an escape
+sequence -- clears the debt.
+
 ## What it does not do
 
 - **No scrollback.** The grid is exactly the visible screen. Shift+PageUp does
diff --git a/include/vt.h b/include/vt.h
index 31ca3c6..b37ebad 100644
--- a/include/vt.h
+++ b/include/vt.h
@@ -79,6 +79,12 @@ struct vt {
   struct vtcell *cells;             // cols*rows, row-major, into vt_storage
 
   int  cx, cy;                      // cursor, in cells
+  // Deferred wrap, the rule every real terminal follows and none of them
+  // document well: a glyph printed in the last column does NOT move the
+  // cursor to the next line. It sets this instead, and the wrap happens when
+  // the *next* glyph arrives. Anything that moves the cursor deliberately --
+  // CR, LF, backspace, an escape sequence -- clears it.
+  int  wrap_pending;
   int  saved_cx, saved_cy;          // DECSC/DECRC
 
   uint8 fg, bg;                     // current SGR colours
@@ -118,6 +124,7 @@ struct vt {
 extern int vt_active;
 
 void          vt_init(void);
+void          vt_resize(void);            // a scanout arrived; re-measure
 struct vt    *vt_get(int i);              // 0-based, clamped, never null
 struct vt    *vt_current(void);
 int           vt_switch(int i);           // 0-based; repaints. -1 if out of range
diff --git a/kernel/dev/gfx.c b/kernel/dev/gfx.c
index 71853f3..e1821de 100644
--- a/kernel/dev/gfx.c
+++ b/kernel/dev/gfx.c
@@ -21,6 +21,7 @@
 #include "device.h"
 #include "display.h"
 #include "gfx.h"
+#include "vt.h"
 
 #define BACKSPACE 0x100
 #define CHAR_HEIGHT 16
@@ -47,6 +48,12 @@ gfx_attach_scanout(const struct fb_info *info)
 {
   scanout = *info;
   fb      = info->ptr;
+
+  // Tell the terminals how big the screen actually is. They were sized before
+  // this driver existed -- the PCI bus is walked long after the terminals are
+  // set up -- so until this call every grid is the 80x24 fallback. See
+  // vt_resize().
+  vt_resize();
 }
 
 const struct fb_info *
diff --git a/kernel/dev/vt.c b/kernel/dev/vt.c
index 7528c83..f8c9734 100644
--- a/kernel/dev/vt.c
+++ b/kernel/dev/vt.c
@@ -118,18 +118,29 @@ termios_defaults(struct termios *t)
   t->c_ospeed = 15;
 }
 
-void
-vt_init(void)
+// The screen size, clamped to what a grid can hold.
+//
+// 80x24 when there is no framebuffer yet -- which is the usual case when
+// vt_init runs, because the display driver is found on the PCI bus and the
+// terminals are set up before the bus is walked. vt_resize() corrects it the
+// moment a scanout arrives.
+static void
+measure(int *out_cols, int *out_rows)
 {
   int cols = gfx_cols(), rows = gfx_rows();
-
-  // No framebuffer (serial-only boot): 80x24 is a stated default rather than
-  // a measurement of nothing. The grids still work and still scroll; nobody
-  // is looking at them.
   if (cols <= 0) cols = 80;
   if (rows <= 0) rows = 24;
   if (cols > VT_MAXCOLS) cols = VT_MAXCOLS;
   if (rows > VT_MAXROWS) rows = VT_MAXROWS;
+  *out_cols = cols;
+  *out_rows = rows;
+}
+
+void
+vt_init(void)
+{
+  int cols, rows;
+  measure(&cols, &rows);
 
   for (int i = 0; i < NVT; i++) {
     struct vt *v = &vts[i];
@@ -153,6 +164,42 @@ vt_init(void)
   vt_ready  = 1;
 }
 
+// The real screen has arrived. Re-measure and re-lay the grids.
+//
+// This exists because of the order the kernel comes up in: terminals are
+// initialised before the PCI bus is walked, so the display driver attaches its
+// scanout *after* vt_init has already sized every grid from a framebuffer that
+// was not there yet. Without this the grids stayed 80x24 on a 160x50 screen --
+// text stopped two thirds of the way down, `ls` formatted for a width the grid
+// did not have and split words across the wrap, and zsh's cursor tracking was
+// wrong on every line.
+//
+// Content is not preserved. Reflowing a grid into a different width is a real
+// problem and there is nothing here worth reflowing: this runs during boot,
+// before console_takeover(), when every grid is still blank.
+void
+vt_resize(void)
+{
+  int cols, rows;
+
+  if (!vt_ready)
+    return;                      // vt_init has not run; it will measure itself
+  measure(&cols, &rows);
+  if (cols == vts[0].cols && rows == vts[0].rows)
+    return;                      // same screen, nothing to do
+
+  for (int i = 0; i < NVT; i++) {
+    struct vt *v = &vts[i];
+    v->cols = cols;
+    v->rows = rows;
+    if (v->cx >= cols) v->cx = cols - 1;
+    if (v->cy >= rows) v->cy = rows - 1;
+    for (int r = 0; r < rows; r++)
+      blank_row(v, r);
+  }
+  vt_repaint(vt_current());
+}
+
 struct vt *
 vt_get(int i)
 {
@@ -219,6 +266,7 @@ vt_cursor_set(struct vt *v, int col, int row)
   if (row >= v->rows) row = v->rows - 1;
   v->cx = col;
   v->cy = row;
+  v->wrap_pending = 0;     // an explicit move is not a wrap
 }
 
 void
@@ -239,21 +287,38 @@ put_blank_at(struct vt *v, int col, int row)
   show(v, col, row);
 }
 
+// Take the deferred wrap, if one is owed. Called before anything that needs
+// the cursor to be at a real position.
+static void
+wrap_now(struct vt *v)
+{
+  if (!v->wrap_pending)
+    return;
+  v->wrap_pending = 0;
+  v->cx = 0;
+  v->cy++;
+  while (v->cy >= v->rows)
+    vt_scroll(v);
+}
+
 void
 vt_putc(struct vt *v, int glyph)
 {
   switch (glyph) {
   case '\n':
+    v->wrap_pending = 0;
     v->cx = 0;
     v->cy++;
     break;
 
   case '\r':
+    v->wrap_pending = 0;
     v->cx = 0;
     break;
 
   case '\b':
   case 0x7f:
+    v->wrap_pending = 0;
     if (v->cx > 0) {
       v->cx--;
       put_blank_at(v, v->cx, v->cy);
@@ -265,10 +330,12 @@ vt_putc(struct vt *v, int glyph)
     // rather than skipping over stale characters. Without a case here '\t'
     // reaches the font as glyph 9, which in CP437 is a hollow circle: pressing
     // Tab printed a circle.
+    wrap_now(v);
     do {
       put_blank_at(v, v->cx, v->cy);
       v->cx++;
     } while (v->cx % 8 != 0 && v->cx < v->cols);
+    if (v->cx >= v->cols) { v->cx = v->cols - 1; v->wrap_pending = 1; }
     break;
 
   default: {
@@ -282,21 +349,25 @@ vt_putc(struct vt *v, int glyph)
       return;
     if (glyph < 0 || glyph > 255)
       glyph = '?';
+    wrap_now(v);                     // the previous glyph filled the line
     struct vtcell *k = cell_at(v, v->cx, v->cy);
     k->ch = (uint8)glyph;
     k->fg = v->fg;
     k->bg = v->bg;
     k->attr = (uint8)v->attr;
     show(v, v->cx, v->cy);
-    v->cx++;
+    // Filling the last column does not move to the next line. It owes a wrap,
+    // and pays it when the next glyph arrives -- which is what makes a line
+    // that is exactly as wide as the screen take one row instead of two, and
+    // what lets a program write to the bottom-right cell without scrolling.
+    if (v->cx + 1 >= v->cols)
+      v->wrap_pending = 1;
+    else
+      v->cx++;
     break;
   }
   }
 
-  if (v->cx >= v->cols) {
-    v->cx = 0;
-    v->cy++;
-  }
   while (v->cy >= v->rows)
     vt_scroll(v);
 }
@@ -339,6 +410,7 @@ vt_clear(struct vt *v)
   for (int r = 0; r < v->rows; r++)
     blank_row(v, r);
   v->cx = v->cy = 0;
+  v->wrap_pending = 0;
   vt_repaint(v);
 }
 
diff --git a/kernel/sys/sys_fs.c b/kernel/sys/sys_fs.c
index aad94d2..969054f 100644
--- a/kernel/sys/sys_fs.c
+++ b/kernel/sys/sys_fs.c
@@ -1061,22 +1061,24 @@ addr_t sys_ioctl(void)
     if (request == TIOCGWINSZ) {
         struct winsize *ws = (struct winsize*)user_ptr(argp, sizeof(*ws));
         if (!ws) return -EFAULT;
-        // The console's real geometry, not a VT100's.
+        // The terminal's own grid, and nothing else.
         //
         // This used to answer 24x80 unconditionally -- the size of a terminal
-        // SchOS has never drawn. Every program that lays out a screen asks
-        // this one question first: a line editor to decide where to wrap, `ls`
-        // to pick a column count, fastfetch to place its logo beside the text.
-        // At 1024x768 with the 8x16 font the console is 128x48, so all of them
-        // were formatting for a screen a third the area of the real one, and
-        // each looked like a separate bug in a separate program.
-        int cols = gfx_cols(), rows = gfx_rows();
-        // Serial-only boot, with no framebuffer attached: 80x24 is then a
-        // stated default rather than a wrong measurement.
-        ws->ws_col = cols > 0 ? (uint16)cols : 80;
-        ws->ws_row = rows > 0 ? (uint16)rows : 24;
-        ws->ws_xpixel = (uint16)gfx_width();
-        ws->ws_ypixel = (uint16)gfx_height();
+        // SchOS has never drawn -- and was then fixed to compute the answer
+        // live from gfx_cols()/gfx_rows(). That was a second source of truth,
+        // and it disagreed with the first: the grids are sized once at
+        // vt_init(), which runs before the display driver is found on the PCI
+        // bus, so they were 80x24 while this reported 160x50. Programs
+        // formatted for a screen the grid did not have -- `ls` split words
+        // across the wrap, text stopped two thirds of the way down, and zsh's
+        // cursor tracking was wrong on every line.
+        //
+        // One number, from the terminal being asked. They cannot disagree.
+        struct vt *v = vt_for_minor(f->ip->minor);
+        ws->ws_col = (uint16)v->cols;
+        ws->ws_row = (uint16)v->rows;
+        ws->ws_xpixel = (uint16)(v->cols * gfx_char_w());
+        ws->ws_ypixel = (uint16)(v->rows * gfx_char_h());
         return 0;
     }
     // The console's size is a property of the framebuffer, so a request to