memory: the e820 work, and why the extended suite flaps

Records the measured effect of the region-based allocator (2.2x on a cold
ls, 6 s off the boot), the two pre-existing UEFI blockers found while
verifying it, and the three confounds that each produced a confident
wrong answer about guest speed in one session.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
Nexoniarz 2026-08-09 21:05:34 +02:00
commit c55e65de5e
2 changed files with 73 additions and 13 deletions

View file

@ -4,7 +4,7 @@ description: bootcheck silently stopped running and five of seven modes asserted
metadata:
node_type: memory
originSessionId: 9d8a2aef-bcf0-47a0-96c6-f706efab4a95
modified: 2026-08-09T13:55:00.546Z
modified: 2026-08-09T19:05:06.942Z
---
**A green run is only green if you counted the checks.** On 2026-08-09 the
@ -45,3 +45,32 @@ of success. Both of these produced clean-looking runs while testing nothing.
**How to apply:** after any change to the harness itself, verify the check
count, not just the absence of FAIL.
## The extended suite is timing-fragile on the Fedora laptop
`Wait-Prompt` waits a fixed **20 s**; measured on this machine with the guest's
own `/proc/uptime`, a cold `ls /bin | wc -l` takes **23 s** and took **51 s**
before the e820 work. When it overruns, the script sleeps 2 s and types anyway,
so the next command lands in a busy shell and the transcript interleaves — and
the check that fails is then some *later* one whose output is no longer
adjacent to its command. `yes writes through a pipe` failed this way while
`y`/`y` were plainly correct in the transcript. Treat a single FAIL in
`-Fb -Tty -Usb -Sock -Evdev -Ps` as suspect until the transcript is read.
**Leaked QEMU made this worse and is now fixed** (commit 4e0478c): the
`finally` cannot run when the *script* is killed, so QEMU outlived it and, under
TCG, taxed every later run. Each run now records its pid and reaps the previous
one's orphan.
## Measuring anything about guest speed
Do not use host wall clock, and do not compare runs made minutes apart. Three
confounds each produced a confident wrong answer in one session:
1. **Stray QEMU** pinning a core (see above).
2. **`build/schfs.img` ages** — it accumulates writes across boots. Delete and
`make build/schfs.img` before every timed boot.
3. **Ordering / host drift** — alternate the variants and run each twice.
Time it from inside: `cat /proc/uptime` either side of the command. The guest's
tick does not care what the host is doing. See [[schunix-verify-by-driving-shell]].

View file

@ -1,8 +1,10 @@
---
name: schos-uefi-loader
description: boot/uefi works under OVMF; the SCH64 entry, the GDT trap, and the one open bug (e820 fragmentation)
description: "boot/uefi works under OVMF; the SCH64 entry, the GDT trap, and the one open bug (e820 fragmentation)"
metadata:
node_type: project
node_type: memory
originSessionId: d4821aa9-2e49-40da-91e7-90ef9ed9997e
modified: 2026-08-09T19:05:15.325Z
---
**`boot/uefi/` boots.** `make uefi`, `make esp`, `make qemu-uefi`. Verified
@ -42,17 +44,46 @@ arriving in long mode is still on the firmware's descriptors; the first thing
needing the kernel's own selectors faulted with `unexpected trap 13 ... cs=38`,
a long way from the cause.
## Open bug: the memory map
## The memory map — fixed 2026-08-09
`e820_init` takes the usable run **containing the kernel**. Under OVMF that run
ends at 8 MB — the firmware places an ACPI NVS region at 0x800000, so it is
genuinely fragmented. The loader's map is truthful and untruncated (21 entries);
the one-contiguous-run assumption is BIOS-shaped.
`e820_init` used to take the usable run **containing the kernel**, which under
OVMF ends at 8 MB because the firmware puts an ACPI NVS region at 0x800000.
That failed the `PHYSTOP_MIN` check, so the kernel fell back to asserting
224 MB it had not measured and then freed straight through the reserved hole.
**Fix: have the kernel free each usable region rather than one range.** That
touches `kalloc`/`freerange` and `kinit1`, which is the most safety-critical
code in the tree — it deserves its own change with both boot paths verified,
not the tail of a session.
The kernel now keeps the usable regions as a **list** (`mem_usable[]` /
`nmem_usable` in memlayout.h) as well as a top address, and `kinit1` frees each
one clipped to the window `main()` passes in. `PHYSTOP` still means exactly what
it did, so no call site changed. `phystop` comes from the **largest** region,
not the highest, because the DMA arena is carved off the top of it and must be
contiguous; a smaller region above it is deliberately left unfreed rather than
raising the bound past a hole.
Result: 1018 MB in 7 regions under OVMF, 1023 MB in 2 under BIOS.
**It is also a large speedup, which was not the goal and is worth knowing.**
Measured from inside the guest (`/proc/uptime`, fresh image each boot,
alternating rounds): boot to prompt **14.8 s vs 21.2 s**, and a cold
`ls /bin | wc -l` **23.6 s vs 51.2 s** — 2.2x. Both rounds agreed within
0.3 s. So if the allocator ever looks slow again, this is the baseline to
compare against.
## What still stops a full UEFI boot
Two separate, pre-existing problems — neither is the memory map, and both
predate the e820 work (the unfixed kernel triple faults in the same place):
1. **virtio-gpu's BAR lands above 4 GB.** OVMF assigns the 64-bit BAR high;
the first MMIO write faults with `CR2` around `0xffff80c000000014`, which is
`P2V` of physical **768 GB**, far outside the 4 GB direct map `kvmalloc`
builds from four 1 GB pages. Then a double fault, then a triple fault and a
reboot loop. SeaBIOS assigns it low, so the BIOS path never sees it.
**Drop `-device virtio-gpu-pci` to boot UEFI past this.**
2. **Boot stalls after `cpu0: starting`**, before `schfs: mounted`. Under UEFI
the ESP is hd0 and schfs.img is hd1; the root never mounts. Not diagnosed.
`cpu0: starting` remains the UEFI high-water mark, now reached with a truthful
memory map rather than a fabricated one.
## Testing