GMMOS: the Guru Meditation Micro OS, alive under the PSOGM

A panic no longer ends in a picture. The report is drawn as before, and
then GMMOS runs under it: the real kernel stays dead -- the other
processors are halted, and nothing of it is called that locks, sleeps,
allocates or waits for an interrupt -- and GMMOS keeps its own clock
(the TSC), its own keyboard (micro drivers, polled), and the screen.

On the report: a live status line counting down the three-minute
power-off, which any key cancels, and the keys.

  Space  the last 300 lines of this boot's log as QR codes, a page per
         symbol, numbered; + and - trade module size for capacity
  L      the log on screen, scrolled
  T      a terminal: why, log, grep, ps, cpus, pci, mem (page tables
         walked first, so a bad address cannot fault), uptime, restart,
         poweroff
  R R    restart; P P power off -- twice, so a stray key does neither

The first micro driver is PS/2, polled: kbd.c with everything but the
keys taken out. The probe asks the keyboard to echo, so a controller
with nothing behind it is not offered as one. Polling also sidesteps the
IRQ 1 polarity quirk, which is about interrupt routing.

A panic inside GMMOS (or a second one in the report) is reported and
then only blinks; it does not re-enter GMMOS.

Checked under QEMU: every screen; two QR pages read off a screenshot
with zbar decode to the log text exactly; restart reboots; left alone it
still powers off at three minutes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4

kernel/core/panic.c

@@ -46,6 +46,7 @@
 #include "gfx/logo.h"   /* LOGO_H -- the mark's height, for the layout below */
 #include "gfx/qr.h"
 #include "dev/acpi.h"
+#include "gmmos/gmmos.h"
 
 extern uint ticks;
 extern int  panicked;
@@ -389,6 +390,9 @@ trace_line(char *buf, int cap, int i, addr_t pc)
 
 /* ------------------------------------------------------------------ */
 
+// Where paint() put its closing lines, for GMMOS to write into.
+static int foot_x, foot_y, foot_step;
+
 static void
 paint(char *reason, addr_t *pcs, int npcs)
 {
@@ -423,7 +427,7 @@ paint(char *reason, addr_t *pcs, int npcs)
   // the tops of "Call chain" underlining the line above. So the layout is
   // measured first -- the text, and room for two frames of the chain -- and
   // what gives way is the margin, then the logo. Never the report.
-  int foot = sh - ch * 4 - ch / 2;
+  int foot = sh - ch * 5 - 4 - ch / 2;
   int body = (ch + ch / 2) + ch * 2 + ch + nfields * (ch + 2) +
              ch + (ch + 2) + ch * 2;
   int logo = 1;
@@ -500,15 +504,20 @@ paint(char *reason, addr_t *pcs, int npcs)
   //
   // Kept under about 45 characters each: the QR card is on the right, and the
   // 62-character command line this replaces used to run underneath it.
-  text_at(left, sh - ch * 4,
+  //
+  // Four lines now, the second and fourth GMMOS's: the second says whether
+  // and when the machine powers off, the fourth which keys do what. Drawn
+  // here as they stand before GMMOS has looked for a keyboard.
+  foot_x = left;
+  foot_y = sh - ch * 5 - 4;
+  foot_step = ch + 4;
+  text_at(left, foot_y,
               "This report is in /proc/kmsg after a restart.", PSOGM_DIM);
-  // A verbose boot keeps the screen up for ever; any other powers off after
-  // PANIC_OFF_MS (see panic_blink), and says so rather than surprising anyone.
-  text_at(left, sh - ch * 4 + ch + 4,
+  text_at(left, foot_y + foot_step,
               boot_verbose ? "schdbg, or Ctrl-G on the console, asks more."
                            : "The machine powers itself off in 3 minutes.",
               PSOGM_DIM);
-  text_at(left, sh - ch * 4 + (ch + 4) * 2,
+  text_at(left, foot_y + foot_step * 2,
               "PSOGM  --  Purple Screen of Guru Meditation", PSOGM_DIM);
   gfx_flush_all();
 }
@@ -559,6 +568,25 @@ report_serial(char *reason, addr_t *pcs, int npcs)
 
 static void panic_blink(void) __attribute__((noreturn));
 
+// The report as it was drawn, so GMMOS can draw it again on the way back
+// from one of its own screens.
+static char  *saved_reason;
+static addr_t saved_pcs[10];
+
+void
+psogm_repaint(void)
+{
+  paint(saved_reason, saved_pcs, 10);
+}
+
+void
+psogm_footer(int *x, int *y, int *step)
+{
+  *x = foot_x;
+  *y = foot_y;
+  *step = foot_step;
+}
+
 volatile int panic_stop;
 static volatile int panic_owner = -1;
 
@@ -593,8 +621,17 @@ panic(char *s)
     pcs[i] = 0;
   getcallerpcs(&s, pcs);
 
+  // Counted for the owner alone. A second panic means the first report, or
+  // GMMOS running after it, is what broke: report that one too, and then only
+  // blink. Re-entering GMMOS would most likely crash it the same way again.
+  static int depth;
+  depth++;
+
   gather(s, pcs, 10);
   report_serial(s, pcs, 10);
+  saved_reason = s;
+  for (int i = 0; i < 10; i++)
+    saved_pcs[i] = pcs[i];
 
   if (gfx_ready()) {
     paint(s, pcs, 10);
@@ -605,6 +642,8 @@ panic(char *s)
   }
 
   panicked = 1;
+  if (gfx_ready() && depth == 1)
+    gmmos_run(s, pcs, 10);
   panic_blink();
 }