1449 lines of boot/bios/, tools/sign.pl and tools/padstage2.pl, plus the
build rules, the disk image and the ISO entry that existed to carry them.
Everything since roughly 2012 boots UEFI, and CSM -- the firmware-side
BIOS emulation that lets a legacy loader run on such a machine at all --
has been going away since Intel dropped support for it in 2020. So this
is not a path being retired early; it is one whose remaining hardware is
already the exception.
The cost was never the code, it was the tax on everything near it. Stage
2 had a 65-sector ceiling it overflowed silently -- 25440 bytes against
24576 -- and because the kernel is written at sector 1 + STAGE2_SECTORS,
an overflowing loader was overwritten by the very kernel it was loading.
The resolution list could not be shared with UEFI either: VBE mode
setting is INT 10h, so matching it needed unreal mode, which is the
riskiest code in the tree for a feature that already worked elsewhere.
What replaces schos.img is the staged ESP, handed to QEMU as a virtual
FAT volume. That is a development arrangement and not an installable
disk; a real GPT image with a real FAT partition is the installer's job,
and until it exists nothing here writes a disk a machine boots unaided.
Secure Boot is untouched too -- the loader is unsigned.
The ISO keeps one El Torito entry, the FAT image holding loader and
kernel. It never booted from a USB stick via BIOS anyway: the firmware
presents the stick as a hard disk while stage2main.c read the kernel back
over ATAPI.
The 32-bit multiboot entry in entry.S now has no caller and is left in
place. Deleting kernel entry code is its own change with its own way of
failing silently, and it should not ride along with this one.
Ported with it: run.ps1, the six screenshot tools, and schcom_test.sh,
each with its own OVMF varstore copy so no run inherits another's UEFI
variables.
Two things this shook out. OVMF now belongs in `all`: nothing boots
without firmware, `make clean` wipes build/ including the copy fetched
from the host, and a clean followed by a build left every run script
throwing. And it cannot be listed as a prerequisite at the top of the
file -- make expands prerequisites when it reads the line, and
$(OVMF_CODE) is defined further down, so naming it there appends nothing
and says nothing.
Verified from a clean tree: 110 [ok] and no failures on the full suite,
the ISO boots with no hard disk attached, schfs-check passes, schcom's
end-to-end pixel test passes, and fbshot captures a real 1280x800 frame.
tools/posix/setup-fedora.sh installs the toolchain and reports what it
cannot: PowerShell has no Fedora package, and bootcheck is the test
suite, so the script says how to get pwsh rather than failing quietly.
It also checks /dev/kvm, since a Ryzen box can run the tests at native
speed.
docs/moving-to-linux.md is the actual procedure: copy the repo, restore
the memory, install, build. The memory travels inside the repo and
`memory-sync.sh import` puts it under the key this machine derives from
its own path -- /home/nexoniarz/Documents/SchOS becomes
-home-nexoniarz-Documents-SchOS, where D:\DEV\SchOS was D--DEV-SchOS.
OVMF discovery no longer assumes QEMU's Windows layout. Fedora ships
edk2-ovmf to /usr/share/edk2/ovmf/, Debian and Arch differ again, so the
Makefile searches a list and names the packages when it finds nothing.
Tested through the shell rather than $(wildcard): on Windows make is a
native binary using Win32 file calls, while `command -v` returns an MSYS
path like /c/Users/..., which $(wildcard) cannot see -- it returned
nothing on a machine that had the firmware.
Two things only that machine can test: `make ports` builds musl, toybox
and mksh from source, which Windows cannot do at all; and the SchFS
round-trip needs symlinks and hard links, so it has never actually run.
tools/windows/ .ps1 (pwsh, so usable from Linux and macOS too)
tools/posix/ .sh
tools/python/ .py
tools/ .c and .pl
The .c and .pl files stay at the top level because they are not
host-specific: the build compiles or invokes them on every platform.
Call sites updated in the Makefile, ports/mk/port.mk, docs and the
project memory. The one thing that does not survive a move on its own is
a script deriving the repo root from its own location -- all nine
PowerShell tools used Split-Path $PSScriptRoot -Parent, and memory-sync.sh
used dirname/.., both of which quietly become tools/ one level deeper.
Two levels now.
Two pre-existing Windows failures surfaced while verifying, both real and
neither caused by the move:
- schfs_fsck.c did not compile under mingw at all: --extract uses
POSIX mkdir(path,mode), symlink() and link(), none of which mingw
has. That took the whole tool with it, and `make schfs-check` with
it. mkdir maps to _mkdir; symlink and link fail loudly rather than
writing a regular file in their place, because an extracted tree
that differs from the image while reporting success defeats the
point of --extract.
- the round-trip test then failed at `ln -s`, since Git Bash cannot
create symlinks without developer mode. It skips with a message now.
Not a fudge: mkschfs's mingw build cannot see a symlink either, so
the test would have compared a tree with none against an image with
none and called it a pass -- coverage reporting itself as present
while being absent.
Verified on Windows: build clean, all seven bootcheck suites green,
make schfs-check passes.
Prerequisites per platform, why the toolchain is clang rather than a
cross-gcc, how to force GNU, and the host differences already handled --
listed because they are the shape of the next such bug.
Records the two things a second machine needs to know: ports cannot be
built on a Windows host (sysroot/ is used as staged, so build them once
on a Unix), and pwsh runs on Linux and macOS so the bootcheck suite is
not Windows-only.
