docs/plan/debugger.md D3 and D4, which finish the plan apart from the
network transport.
D3 -- `whose <addr>`. The views each speak for one subsystem, which is what
keeps them cheap and current, and it is exactly why none of them can see
the bug that matters: a page on the DMA arena's free list looks fine from
dma.c, the same page on kalloc's free list looks fine from kalloc.c, and
that it is on both is a fact no single subsystem holds.
# schdbg whose 0x3e239000
phys 0x000000003e239000 kernel va 0xffff80003e239000
dma arena, handed out
pcidma slot 2, 0 KB into a 4000 KB block given to pid 4 (vgpud)
mapped pid 4 (vgpud) at 0x000000004000d000 rwu vma[5] no_free
consistent: 1 owner, 1 mapping(s)
Claimants register the way views do -- one line in the file that owns the
data -- so the kernel image, the log region, the arena, the page allocator,
the pciuser DMA blocks and every page table each answer for themselves.
`mapped` is the one no allocator can answer: there is no reverse map, so
vm_walk_user() goes forward over every mapped page of every live process.
Two verdicts are shouted and everything else is reported as fact. More than
one owner means the second allocator to hand the page out is handing out
memory the first is still using -- the H2 bug, which would have printed as
three lines. Free-but-still-mapped means a page will be given away from
under the page tables that point at it. Deliberately *not* a finding: no
owner at all, because kalloc keeps a free list and no record of what it has
handed out, so an ordinary allocated page has nobody to speak for it and
saying otherwise would be the query crying wolf.
D4 -- watchpoints, on the four debug registers that had been sitting unused
since this kernel was written. Armed against the same framebuffer page and
then killing the driver:
watch 0: 0xffff80003e239000 written, 8 byte(s), by stosq+0x1f, pid 12 vgpud
#0 memset+0xba
#1 dma_alloc+0x2e2
#2 do_dma+0x22a
#3 pciuser_ioctl+0x13b
#4 sys_ioctl+0x3c7
#5 syscall+0xf6
The chain is the answer, not the rip. It reports and continues -- a data
watchpoint is a trap, delivered after the store completes, so returning
carries on with the program none the wiser, which is what lets this be used
on a machine that is still running.
Debug registers are per-CPU and there is no general IPI here, so the table
carries a generation number and each CPU reloads from its timer interrupt
when it notices the number has moved: one comparison per tick, one tick of
latency at worst. `watch` prints which CPUs have caught up, because "this
watchpoint is watching" and "this watchpoint is watching one CPU" must not
look the same.
Also fixed while testing: watch_init() was called from mpmain(), which runs
on every processor, so the command appeared in the list once per CPU.
dbg_register() now refuses a duplicate name outright, so the next init that
runs per-CPU fails loudly in the list rather than quietly doubling it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz