The fixed tables that a bigger machine than the one they were written
on reaches first, each raised to where it costs little:
NPCI 64 -> 256 a desktop with cards and Thunderbolt passes 64,
and the devices past it -- often the disk or
NIC last in bus order -- were ignored; 44 KB
NSOCK 32 -> 128 Unix sockets, which a desktop session uses by
the dozen; 4.9 KB each, 470 KB in all
NDEVICE 32 -> 128 120 bytes each
NIFDEV 16 -> 64 one dock is a hub, Ethernet, audio and a card
reader at two or three interfaces apiece
NETIF_MAX 4 -> 8
Device names took one digit and clamped there, so the tenth device of
a kind and every one after it was named "...9". Two digits now.
Checked under QEMU with two bridges of test devices: 68 functions,
all in lspci, /proc/pci and /sys/bus/pci.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
NCPU was 16, under what a desktop has today. 64 costs 48 more TSS
I/O bitmaps and scheduler stacks, about 800 KB of BSS. Past 254 the
APIC would need x2APIC mode, which is a separate change.
With more than 16 there were two other ceilings. sched_getaffinity
wrote "CPU 0" and returned 0, and musl clears every byte past the
count returned -- so the mask came back empty and nproc, make -j and
sysconf(_SC_NPROCESSORS_ONLN) all said 1, on any machine. It returns
the mask of processors that started, and its size, now. And /proc
rendered every file into 2 KB, which /proc/cpuinfo ran out of at the
eighteenth processor without a word; /proc/pci, /proc/interrupts and
/proc/mounts were each one bigger machine from the same cut. There is
one 64 KB buffer for it now behind a sleeplock, since there is no
allocator for contiguous pages, and the generators that write raw
are given the real capacity instead of a constant.
Checked under QEMU with -smp 24: nproc 24, /proc/cpuinfo whole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
exec took 32 arguments and 64 environment variables, in fixed arrays,
so a glob over more than 31 files failed with E2BIG. It now reads the
caller's argv and envp where they are, through the uaccess helpers and
a bounce page -- a second thread rewriting the array after a check
cannot slip a kernel address in -- and sizes the new stack to fit
them. The limits are Linux's: ARG_MAX, 2 MB of strings and pointers,
and 128 KB for any one string (USER_STR_MAX follows it).
Every mmap took one of a process's 256 VMA slots, and zsh takes one per
16 KB heap block, so `x=($(<file))` over 30000 words ran out after 4 MB
of heap and exited 1 without a word. Neighbouring anonymous mappings
now share a record, as Linux merges them -- the bump allocator puts
each new one where the last ended -- and munmap trims or splits it.
Partial unmaps of device or segment mappings are refused with EINVAL
instead of kfree()ing pages that are not the process's, and a failed
allocation half way through a mapping no longer leaks what it had.
Checked under QEMU: touch over 3000 names, /bin/echo with 50000
arguments, E2BIG past 2 MB, zsh splitting 100000 words, fork loops.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
A program that wants to make a sound opens /dev/dsp, writes PCM, and closes
it. That is what UNIX audio has always been and it now exists here:
tone 440 2
Three pieces, in the order a sample passes through them. **/dev/dsp** is a
character device where write() is audio and a handful of OSS ioctls say what
the samples are. **AudioEngine** is everything above a driver that is not
specific to a chip -- the format, whether there is room, and what a write does
when there is not. **A driver** is bound by class, exactly as a display driver
is: device_find_class(DEVCLASS_AUDIO).
OSS numbering rather than something new, because every UNIX audio program ever
written already knows it and the only thing a different set would achieve is
making ports harder. They are read/write ioctls, which is the part that
matters: a program asks for 44100, the device sets 48000 and writes 48000
back, the program resamples. One that ignores the answer plays 9% fast, and
that is its bug rather than the driver's.
**The engine is deliberately one stream.** Mixing several programs is a real
feature with a real design behind it, and building it before anything had
played a single sound would be exactly what docs/plan/1.0.md keeps a register
for: work that exists and is connected to nothing. The second program that
wants to play at the same time is what should cause it to be written.
**audio_wait() sleeps on the timer tick, not on the device.** That looks like
the lazy choice and is not: a ring that drains is a ring with room, so asking
again in ten milliseconds always makes progress, whereas sleeping on the card
makes audio depend on an interrupt arriving. On a machine whose line is
misrouted that is not a stutter, it is a writer that never wakes. The handler
still accounts for finished buffers -- deleting it would cost efficiency, not
correctness -- and it retires descriptors through the same `tail` pointer
queue() uses, so the two cannot disagree about what is in flight.
**AC'97 first because HDA is two unproven things at once.** It is the simplest
audio device that exists on real machines and in QEMU both. Intel HDA is what
the laptop actually has and is a much larger driver; writing it against an
interface nothing had ever played through would have meant debugging the
driver and the interface simultaneously. HDA arrives as a second
struct audio_ops and nothing above it changes -- which is the entire point of
the class.
Two things the wiring needed: PCI class 0x04 now maps to DEVCLASS_AUDIO (the
driver bound and /proc/devices showed it, but audio_get() found nothing,
because the class byte had never been translated), and include/x86.h grew
inw() -- AC'97's mixer is all 16-bit registers and reading one a byte at a
time returns the low half twice on some codecs.
**Tested by measuring what came out, not by not crashing.** QEMU's wav backend
writes the guest's audio to a file; `tone 440 2` produced 1.97 seconds of
44.1 kHz stereo with peak amplitude 14177 against the generator's table
maximum of 14178, and 880 zero crossings per second -- 440 Hz exactly. wav is
on every QEMU target rather than a host backend, because a build machine may
have no sound card and it is the only backend whose output can be checked.
Both supported configurations: one boot each, no traps, no panics, socktest
and memfdtest green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Painting every kernel stack at allocation and scanning it on each trap puts the
high-water mark at **3736 of 4096 bytes** -- 91%, in netd, inside lwIP's input
path. 360 bytes of headroom on a kernel that takes interrupts on the current
stack is not headroom: a timer landing at that depth pushes a trapframe and
runs trap() straight off the bottom of the page and into whatever kalloc handed
out next, which is very often another process's kernel stack.
The canary at kstack[0] did not catch this and could not have. It is checked on
trap entry and exit, and a frame allocated in one `sub $N, %rsp` steps clean
over the bottom eight bytes and writes below them without ever touching it. It
catches a slow walk past the end, not one deep call.
8192 now, and the stacks are static -- one per ptable slot, NPROC * KSTACKSIZE
= 1 MB of BSS. Static rather than a bigger kalloc because kalloc() hands out
exactly one page and there is no contiguous multi-page allocator to ask. A
process's slot is fixed for its lifetime, so the stack belonging to that slot is
the natural answer: no allocation to fail, no free to forget, and the kalloc
failure path in allocproc() goes away with it. The page was being paid for out
of kalloc before, one at a time, and undercounted.
**And the AP scheduler stack was already wrong.** startothers() did
`stack = kalloc()` for one page and then handed the AP `stack + KSTACKSIZE` as
its stack top. Exactly right for as long as KSTACKSIZE happened to equal
PGSIZE, and a whole page past the allocation the moment it did not -- which
this commit would have made true. That is not a throwaway boot stack either:
the AP runs mpmain() and then scheduler() on it for the rest of the machine's
life, and takes interrupts on it whenever no process is current. Static too,
NCPU of them.
**This does not fix the intermittent zsh crash**, and the measurement above was
taken while looking for it. It is worth saying plainly: 1-3 shells per boot
still die, so the hypothesis was wrong and the stack was a separate latent bug
that the search turned up.
What the search did establish is worth more than the guess was:
- **It is SMP-only.** Three boots at -smp 1: zero faults. Three at -smp 2:
one, three, one.
- **It is not only zsh.** schinitd took one too.
- **The faults name their cause if you print enough.** `rip 0x0` is a process
handed a zero and following it, not a process that branched anywhere. And
schinitd's `addr 0xffffffffffffffea` is -22, which is -EINVAL: a call
returned an error and the caller used it as a pointer.
So trap.c dumps registers, segments, and the top of the user stack for a fault
at rip below a page or a faulting address near zero, the way it already did for
a GP fault. Neither of the two facts above was visible from the one-line
report, and both came out of the first dump that included them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
docs/plan/ldls.md L3a -- the class bridge, and the first of the three pieces
L3 turned out to be.
/dev/netdev is /dev/pci with the arrows reversed. That hands a device to a
process; this lets a process be one. The kernel side is netdev_ops and nothing
else -- transmit, receive, mac, link_up, the same four entries e1000
publishes -- so a process claims the device, supplies a MAC, and from then on
read() gives it frames the stack wants sent and write() hands it frames that
arrived.
cmd/netecho proves it and is deliberately not a driver: no hardware, none
claimed, every frame answered by the program itself. DHCP so the interface
gets an address at all, ARP so the stack can find it, ICMP so it can be
pinged. All built by hand from RFCs 826, 791, 792 and 2131.
# netecho &
netuser: ldls0 is a process now, 2:4c:44:4c:53:1
netecho: I am 10.9.0.1 and will offer 10.9.0.2
netecho: answered DHCP, offering an address
# cat /proc/netif
interface ldls0 driver netuser address 10.9.0.2 gateway 10.9.0.1
# ping 10.9.0.1 3
netecho: answered an ARP
netecho: answered a ping
3 packets transmitted, 3 received, 0% packet loss
The interface got its address by DHCP from a process and then answered ping
from one. lwIP never learns that the thing behind netdev_ops is not a driver,
which is the whole property the bridge exists to have.
It dies the way it should, too. kill the process and link_up() answers false
immediately, so the stack refuses to send -- "ping: sendto: -5" -- rather than
swallowing packets into a driver that is not there. Start another and the
*same* interface comes back, keeping its address. That came free:
netuser_release_all() sits beside pciuser_release_all() in exit() for exactly
the same reason, and the reason is that a process holding a device is one that
may crash.
One thing the kernel needed: netinit() starts DHCP on the devices that exist
when it runs, so an interface created later -- which is how an LDLS-hosted
driver arrives -- would have come up with no address and no way to get one.
net_attach_late() fixes that, and lives in kernel/net/net.c because that is
the only file allowed to include lwIP's headers.
Recorded as not done, because it is not: this proves the bridge, not a driver.
Nothing in that test loads a module. That is why it was done first -- if ping
had not worked here the bridge would be wrong, and now a failure with a real
driver can only be the driver's side. L3b is the SchOS-side host, L3c is the
fifteen symbols for real, and L3 is the two joined.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Porting zsh found four defects in the kernel and one in the filesystem. None
of them were about zsh; all of them had been there the whole time.
**exec threw the environment away.** kernel/fs/exec.c wrote a single zero for
envp with the comment "(no environment)" -- not yet, but ever, for every
process. musl has been passing a perfectly good envp to execve (Linux 59, which
SchOS answers) and it was never read. So $TERM was unset, $PATH was whatever
each program invented, and a variable exported in a shell did not survive the
exec meant to carry it. exec() takes an envp, sys_exec reads argument three,
and schinit manifests grew an Environment key. The userland two-argument
exec(path, argv) stays as a wrapper that passes null explicitly -- the raw stub
is execve now, so a short caller cannot leave %rdx holding a stray pointer.
**Which overflowed the kernel stack.** Three pointer arrays, ~1.8 KB, on a
4096-byte stack, under exec -> loaduvm -> readi -> SchFS -> btree. Pid 1 went
down on the first exec. The canary caught it and named the process, which is
what it is for. They live in one kalloc'd page now.
**waitpid returned a bare -1** for both "no children" and "interrupted". musl
reads [-4095,-1] as -errno, so userspace saw EPERM; zsh printed "wait failed:
operation not permitted" and abandoned the rest of /etc/zsh/zshrc. -ECHILD and
-EINTR now. Third time a bare -1 has cost real time -- on a system with no
permission model, EPERM should be read as "a syscall returned -1".
**NVMA was 64.** musl's allocator takes a mapping per size class and does not
release them eagerly, so compinit ran out of slots and got -1, which is EPERM,
which malloc turns into NULL, which zsh reports as "fatal error: out of memory"
-- on a machine with 1000 MB free. 256 slots, and -ENOMEM.
**And a small write to SchFS costs 58 ms.** 200 writes to one open file take
11.75 s; the same to /dev/null take 0.14 s. That is the design stated at the
top of kmount.c -- one transaction group per operation, and a commit is two
flushes and an uberblock -- not a bug. But compdump writes its digest with
thousands of separate prints, so it takes minutes and looks like a hang.
compinit -D, which skips the dump, finishes in 3.6 s. This one is a decision
rather than a fix, so it is written up and left: /etc/zsh/zshrc keeps compinit
switched off and explains exactly why, with the measurements.
zsh runs as /bin/zsh and is the console shell. ZLE works -- arrow keys recall
history through terminfo, $COLUMNS reads the real 160 because TIOCGWINSZ was
fixed, colour and prompt expansion work, startup is 0.14 s. mksh keeps /bin/sh,
so schinit's no-jobs fallback is a different program from the one that could
have failed.
Also fixed while here: AT_CLKTCK was the literal 100 and is USER_HZ; the
extract rule in four ports could move a source tree inside itself when make
re-ran it, which is how zsh's configure came to write modfile=zsh-5.9/... into
config.modules and fail three steps later.
schfs-check passes. Full writeup in docs/history/kernel.md section 14.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported 3 seconds of uptime after 15 real ones, `time` claimed
3.12s for a 20-second command, and ping's one-second interval was closer to
six. One cause, not three: `ticks` was advancing at ~14.5 Hz instead of 100.
It was not the timer. virtio-gpu-pci shares IRQ 11 with the e1000 and
registered no interrupt handler at all. PCI INTx is level-triggered, so the
device held the line asserted, the kernel signalled EOI, and it fired again
immediately -- 72,000 interrupts a second, 83% of CPU0, starving the tick.
The e1000's handler read ICR as zero half a million times, correctly
answering "not mine", which is what made it look like a network-free problem.
Reading virtio's ISR byte clears it and drops the line. That is the fix.
irq_dispatch now measures each line's rate against the TSC -- not ticks,
which is the first casualty of a storm -- and names the attached handlers
once above 20000/s. It reproduces the original fault as a single line.
Found along the way, and fixed because they were real:
- lapicinit loaded TICR with xv6's uncalibrated 10000000, whose own comment
admitted it was never measured. calibrate_timers() now measures the LAPIC
and the TSC against the 8254 PIT. (It came back at 999.9 MHz, so this was
not the bug -- but the next machine is not obliged to be 1 GHz.)
- microdelay() was an empty function body. Every microdelay(1000) in the
xHCI reset path and the USB hub power-on sequence returned instantly.
- HZ is a constant in param.h now, not the literal 100 written out at a
dozen ticks-to-seconds conversions. USER_HZ is separate and deliberately
does not follow it: musl answers sysconf(_SC_CLK_TCK) with 100 always, so
times() and /proc/stat scale at the syscall boundary the way Linux does.
- TIOCGWINSZ answered a hardcoded 24x80. gfx_cols()/gfx_rows() have known
the real geometry all along; at 1024x768 the console is 128x48, so every
program that lays out a screen was formatting for the wrong one.
- TCFLSH fell through to the catch-all `return 0`, claiming to discard
input without discarding any.
uptime now advances 5.01 seconds per 5 real seconds. schfs-check passes.
Full investigation, including the two wrong hypotheses and the measurement
flaw that protected them, in docs/history/kernel.md section 13.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The TCP/IP stack reached straight into the first driver anyone wrote.
net.c called e1000_present(), the lwIP glue was named netif_e1000.c and
called e1000_transmit(), and include/defs.h declared the driver's
internals to the whole kernel. The second NIC driver would therefore
have arrived with a near-identical copy of the glue file and a patch to
the protocol stack, which is the arrangement include/device.h was
written to prevent -- the e1000 even said so, with `.ops = 0, // no
class vtable yet; there is no net class`.
There is now. A driver publishes a struct netdev_ops -- transmit,
receive, mac, link_up -- and is finished: it never mentions lwIP, and
nothing above it learns its name. The display class was already this
shape; this is the same shape for networking, and the two now read the
same way in kernel/dev/device.c.
What that made possible immediately:
- One netif per bound device instead of one per driver. lwIP's glue is
netif_eth.c, it takes a struct device, and it holds up to NETIF_MAX
interfaces. net.c attaches every network device it finds and starts
DHCP on each, because which interface the network answers on is not
ours to decide.
- /proc/netif lists all of them, one block of fields each, with the
interface name and the driver that claimed it.
- The ARP self-test moved from the e1000 to the class. Nothing in it
was chip-specific, and it is the first thing anyone will want to run
against the next driver. Still `echo n > /proc/sysrq`.
- Private headers live with their driver: e1000.h was in include/,
where exactly one file could use it. The driver build now adds the
driver's own directory to the include path.
The e1000 also drives more than one card. Its probe() refused the second
outright, because there was a single static instance -- so a machine
with two of them drove one and silently ignored the other. Instances are
an array now, and the instance is hung on dev->priv by a new optional
`attached` hook that the bus calls once the device exists. probe() runs
before device_add(), so there was previously nowhere to put it; that is
the whole reason the hook exists rather than a line inside probe.
QEMU gets an explicit NIC on every target (QEMU_NET). The default device
happens to be an e1000 on this machine type today, which is exactly the
sort of thing that stays true until a QEMU release changes it and the
network stops being exercised without anyone noticing.
Verified:
- bootcheck -Net passes, 48 [ok], no failures -- including the moved
self-test and two new checks that /proc/netif names both the
interface and the driver behind it, which together say the stack
went through the class rather than through a driver it was compiled
to know.
- Two NICs attached by hand (-device e1000 twice, second with its own
MAC): eth0 and eth1 both attach, each reports its own MAC in
/proc/netif, and each gets its own DHCP lease. Before this commit
the same machine produced one interface.
- make schfs-check still passes in full.
One trap worth recording: moving a header broke the build for anyone
with stale .d files -- make stopped with "No rule to make target
'include/e1000.h'". CFLAGS gains -MP, which emits a phony target per
header so a moved or deleted one can never wedge the build again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two bugs reported from actual use, plus a test harness that had stopped
testing.
init could be killed by Ctrl-C, taking the machine with it. SIGINT goes
to the foreground process group, init is pgid 1, and any window where
tty_fg_pgrp is 1 -- before a shell claims the terminal, after one exits,
or between the two while the key is held -- lands it on init. init has
no handler, so killed was set, exit() ran, and exit() panics outright on
initproc. Spamming Ctrl-C at a frozen program is exactly the input that
finds that window. POSIX and Linux both discard a default-action signal
for pid 1; init_ignores() now does the same, SIGKILL included, because
init is not killable from userspace on any Unix.
Everything was slow because BSIZE was 1024 while a SchFS block is 4096,
so every block cost four IDE requests, each with its own interrupt and
sleep/wakeup. exec() of the 800 KB toybox binary meant ~800 round trips.
The giveaway: `seq 1 200`, which touches no file and prints nothing,
cost the same 2.0s as `cat /bin/toybox`, and `ls | wc -l` cost exactly
double -- both dominated by loading the same binary twice.
BSIZE is 4096 now, one request per SchFS block, and NBUF is 256 blocks
(1 MB) rather than 90 KB -- smaller than the binary every command execs,
so nothing was ever still resident. ideinit() issues SET MULTIPLE MODE,
which is what makes a 4096-byte transfer legal: READ/WRITE MULTIPLE move
the drive's multiple count per interrupt and nothing had ever set it,
which is the real reason idestart() carried a sector_per_block > 7 panic.
seq 1 200 2.02s -> 0.06s
ls /bin 2.76s -> 0.68s
ls /bin | wc -l 4.68s -> 0.73s
And the harness. bootcheck called Find-Qemu from a param() default,
which is bound before any function in the body exists -- so it died on
its first line and printed an error containing neither "FAIL" nor
"Exception", the two things being grepped for. It had not run since it
was made host-portable. Worse, an earlier index-based edit had deleted
the Expect blocks for -Tty, -Usb, -Sock, -Ps and -Evdev, so five of the
seven modes asserted nothing at all. Restored, and the USB run gets its
own 16 MB build/usbstick.img: it had been pointed at build/fs.img, which
nothing builds since SchFS became root, so QEMU refused to start.
242 checks across seven modes, all passing, and make schfs-check green.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz