The network thread waited on the timer and nothing else, so a frame that landed
just after a poll sat in the ring for up to 10 ms -- the largest fixed latency in
the system. That was deliberate when the stack was new (a receive path woken by
an interrupt is much harder to debug than one that is asked) and there is now a
working stack to compare against, which is exactly when it becomes safe to do.
The frame is still *pulled* by the thread through .receive. It has to be: a call
into lwIP can reach the driver, the driver can sleep on the buffer cache, and an
interrupt handler may do neither. netdev_rx_signal() delivers nothing and reads
no ring -- it only ends the wait early.
The wait stays on the timer tick rather than moving to a channel of its own, and
that is the design. lwIP's timers must still run when the link is silent, so the
clock has to remain a floor under the wait, and sleep() cannot wait on two things
at once. Joining the tick's existing wakeup costs nothing and leaves one wait
with one predicate.
rx_signal lives under tickslock for the same reason it gets no lock of its own:
sleep() releases tickslock atomically, so a driver setting the flag and waking
under that lock cannot lose the wakeup by arriving between the predicate test and
the sleep. A private lock would not be held across the sleep, and that window
would be back. Calling it from interrupt context is safe on the same terms the
timer handler already relies on -- acquire() disables interrupts, so a CPU
holding tickslock cannot be interrupted into it.
The e1000 signals on RXT0 (a frame or burst has landed) and RXDMT0 (the ring has
fallen below its threshold, which is when waiting for the clock hurts most).
Measured rather than asserted: /proc/netif reports wake_rx and wake_tick, and
across three pings rx_frames and wake_rx both went 2 -> 6 -- every received frame
woke the thread through the interrupt. wake_tick keeps advancing as the idle
floor, which is what lwIP's timers need. socktest still passes and ping is still
0% loss.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The TCP/IP stack reached straight into the first driver anyone wrote.
net.c called e1000_present(), the lwIP glue was named netif_e1000.c and
called e1000_transmit(), and include/defs.h declared the driver's
internals to the whole kernel. The second NIC driver would therefore
have arrived with a near-identical copy of the glue file and a patch to
the protocol stack, which is the arrangement include/device.h was
written to prevent -- the e1000 even said so, with `.ops = 0, // no
class vtable yet; there is no net class`.
There is now. A driver publishes a struct netdev_ops -- transmit,
receive, mac, link_up -- and is finished: it never mentions lwIP, and
nothing above it learns its name. The display class was already this
shape; this is the same shape for networking, and the two now read the
same way in kernel/dev/device.c.
What that made possible immediately:
- One netif per bound device instead of one per driver. lwIP's glue is
netif_eth.c, it takes a struct device, and it holds up to NETIF_MAX
interfaces. net.c attaches every network device it finds and starts
DHCP on each, because which interface the network answers on is not
ours to decide.
- /proc/netif lists all of them, one block of fields each, with the
interface name and the driver that claimed it.
- The ARP self-test moved from the e1000 to the class. Nothing in it
was chip-specific, and it is the first thing anyone will want to run
against the next driver. Still `echo n > /proc/sysrq`.
- Private headers live with their driver: e1000.h was in include/,
where exactly one file could use it. The driver build now adds the
driver's own directory to the include path.
The e1000 also drives more than one card. Its probe() refused the second
outright, because there was a single static instance -- so a machine
with two of them drove one and silently ignored the other. Instances are
an array now, and the instance is hung on dev->priv by a new optional
`attached` hook that the bus calls once the device exists. probe() runs
before device_add(), so there was previously nowhere to put it; that is
the whole reason the hook exists rather than a line inside probe.
QEMU gets an explicit NIC on every target (QEMU_NET). The default device
happens to be an e1000 on this machine type today, which is exactly the
sort of thing that stays true until a QEMU release changes it and the
network stops being exercised without anyone noticing.
Verified:
- bootcheck -Net passes, 48 [ok], no failures -- including the moved
self-test and two new checks that /proc/netif names both the
interface and the driver behind it, which together say the stack
went through the class rather than through a driver it was compiled
to know.
- Two NICs attached by hand (-device e1000 twice, second with its own
MAC): eth0 and eth1 both attach, each reports its own MAC in
/proc/netif, and each gets its own DHCP lease. Before this commit
the same machine produced one interface.
- make schfs-check still passes in full.
One trap worth recording: moving a header broke the build for anyone
with stale .d files -- make stopped with "No rule to make target
'include/e1000.h'". CFLAGS gains -MP, which emits a phony target per
header so a moved or deleted one can never wedge the build again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Nexoniarz