Xorg finds its VT through /dev/tty0, and without one ran on none: the
console went on drawing into the framebuffer over the X screen. tty0 is
the terminal on screen, as on Linux. FBIOPUTCMAP succeeds, as it does on
a true-colour Linux framebuffer, instead of 256 logged errors per start.
schos-base gives root a .xserverrc with -dumbSched, Xorg's switch for
input on the main loop: SchOS has no threads, and Xorg crashed in
pthread_join on its input thread when the first client left. It adds
the hostname to /etc/hosts, so xauth can resolve schos:0.
zsh loses PROMPT_SP: on a serial terminal narrower than the console its
padding wrapped and left a # above every prompt. bootcheck knows zsh's
prompt and matches without colour codes, so busybox's ls reads as text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Found by running Alpine's apk on SchOS, one failure at a time:
- chroot(2) was a stub returning EPERM. Each process now has a root:
where an absolute path starts and where .. stops. Mounts remember
whose root they were made under, and a walk leaves a mount by the way
it came in, so one filesystem can be mounted twice.
- devtmpfs and proc mounted only on /dev and /proc, whatever the target;
a chroot got "already mounted".
- mmap never reused freed address space, so musl's malloc used up the
256 mapping records while 780 MB were free. A mergeable mapping now
goes straight after an anonymous one whose end has room.
- unlinkat returned -1 (EPERM) where apk expects ENOENT, and renameat
was an old copy of rename: no replacing the target, and v1 dirents
written into SchFS. Both now share rename's implementation.
- execve runs #! scripts, and says ENOEXEC for what it cannot run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Sixty-five headers sat side by side in include/, so `#include "irq.h"`
said nothing about where irq.h was or what it belonged to, and errno.h,
stat.h and fcntl.h at the top shadowed the system's for any host tool
built with -I./include. They are in folders now -- arch/ core/ fs/
dev/ gfx/ net/ uapi/ (and ldls/ for the Linux driver layer) -- and
every include names the folder, as Linux's do: "core/proc.h".
Done mechanically and checked the hard way: the kernel built from this
tree disassembles identically to the one built from the tree before
it. The full image boots, and userland is the same set of programs.
Paths in docs and comments follow; docs/guides/layout.md has a table
of what is where, and tools/fix-includes.py rewrites old-style
includes from the folders in the tree, for code written before this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The filesystem every other system can read: a USB stick, an SD card, the
EFI system partition. It is here first for the hardware report, which has
to leave a machine on something that can be read on another one.
mount -t vfat /dev/usb0p1 /mnt (msdos and fat work too; -o ro)
Written from Microsoft's specification, and matched to Linux vfat where
the specification leaves a choice: 8.3 names with the NT lowercase bits,
long-name entries otherwise, Linux's alias rule (REPORTS, then BIGNUM~1),
case-insensitive lookup, UTC times, the boot-sector dirty bit, every FAT
copy and FSInfo kept up to date. It uses its own sector cache over the
new blkdev_xfer, since a partition need not be a whole number of 4 KB
blocks, and every operation that changes something reaches the disk
before it returns. Inode numbers come from the entry position, or the
first cluster for a directory, plus a small table for entries that moved.
Around it:
- /dev lists every disk and partition the block layer found (major 8,
minor = block device), and raw reads and writes on them go by sector.
- The ESP and MBR FAT partitions are registered, typed so the root probe
passes over them. MBR entries with a bad status byte are skipped, so a
superfloppy's boot code is not read as a partition table.
- statfs, sync, fsync, umount (EBUSY while in use), shutdown, reboot and
the power button all know about FAT.
- create undoes and reports a failed ialloc or dirlink (ENOSPC, EINVAL,
EPERM) instead of panicking; fs_ops gains refuse_types and no_hardlinks.
- filewrite returns a short write instead of panicking on it.
- utimensat is implemented. As a stub returning 0 it made toybox touch
believe the file existed, so `touch newfile` created nothing on any
filesystem.
Tested in QEMU against mkfs.vfat images (FAT12 floppy, FAT16 on MBR,
FAT32 superfloppy and GPT ESP) by writing, renaming, deleting, filling to
ENOSPC and truncating there, then checking with fsck.fat -n and mtools on
the host: all clean, contents match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Nexoniarz is the sole author and SchOS was never published under
Apache-2.0, so this is a straight relicence. LICENSE is the FSF GPLv2 text,
every first-party SPDX header moves to GPL-2.0-or-later, and NOTICE,
README.md, docs/licensing.md and the site say so. projects/schfs-linux
follows the rest of the tree.
The GPL gives copyleft: a fork has to ship its source. It also lifts the
old "Linux drivers, never" rule, since GPL-2.0-only code combines with
GPL-2.0-or-later. "Or later" leaves room for GPLv3, but one binary still
has to pick one version, so docs/licensing.md now keeps Apache-2.0 and
GPLv3 code out of the kernel to keep Linux code possible there. BSD
4-clause code goes from "avoid" to "no", because the advertising clause
is GPL-incompatible.
LDLS still ships no .ko. That boundary is now project policy rather than
a legal requirement, and ldls.md, devices.md and licensing.md section 6
say so. refmod declares license=GPL, and ldls-check passes (27 checks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A program that wants to make a sound opens /dev/dsp, writes PCM, and closes
it. That is what UNIX audio has always been and it now exists here:
tone 440 2
Three pieces, in the order a sample passes through them. **/dev/dsp** is a
character device where write() is audio and a handful of OSS ioctls say what
the samples are. **AudioEngine** is everything above a driver that is not
specific to a chip -- the format, whether there is room, and what a write does
when there is not. **A driver** is bound by class, exactly as a display driver
is: device_find_class(DEVCLASS_AUDIO).
OSS numbering rather than something new, because every UNIX audio program ever
written already knows it and the only thing a different set would achieve is
making ports harder. They are read/write ioctls, which is the part that
matters: a program asks for 44100, the device sets 48000 and writes 48000
back, the program resamples. One that ignores the answer plays 9% fast, and
that is its bug rather than the driver's.
**The engine is deliberately one stream.** Mixing several programs is a real
feature with a real design behind it, and building it before anything had
played a single sound would be exactly what docs/plan/1.0.md keeps a register
for: work that exists and is connected to nothing. The second program that
wants to play at the same time is what should cause it to be written.
**audio_wait() sleeps on the timer tick, not on the device.** That looks like
the lazy choice and is not: a ring that drains is a ring with room, so asking
again in ten milliseconds always makes progress, whereas sleeping on the card
makes audio depend on an interrupt arriving. On a machine whose line is
misrouted that is not a stutter, it is a writer that never wakes. The handler
still accounts for finished buffers -- deleting it would cost efficiency, not
correctness -- and it retires descriptors through the same `tail` pointer
queue() uses, so the two cannot disagree about what is in flight.
**AC'97 first because HDA is two unproven things at once.** It is the simplest
audio device that exists on real machines and in QEMU both. Intel HDA is what
the laptop actually has and is a much larger driver; writing it against an
interface nothing had ever played through would have meant debugging the
driver and the interface simultaneously. HDA arrives as a second
struct audio_ops and nothing above it changes -- which is the entire point of
the class.
Two things the wiring needed: PCI class 0x04 now maps to DEVCLASS_AUDIO (the
driver bound and /proc/devices showed it, but audio_get() found nothing,
because the class byte had never been translated), and include/x86.h grew
inw() -- AC'97's mixer is all 16-bit registers and reading one a byte at a
time returns the low half twice on some codecs.
**Tested by measuring what came out, not by not crashing.** QEMU's wav backend
writes the guest's audio to a file; `tone 440 2` produced 1.97 seconds of
44.1 kHz stereo with peak amplitude 14177 against the generator's table
maximum of 14178, and 880 zero crossings per second -- 440 Hz exactly. wav is
on every QEMU target rather than a host backend, because a build machine may
have no sound card and it is the only backend whose output can be checked.
Both supported configurations: one boot each, no traps, no panics, socktest
and memfdtest green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
schdbgd bridges TCP to the debugger, which is the one way in that does not
need you to be sitting at the machine. It is a bridge and nothing else: a line
in becomes a line written to /dev/dbgro and the answer comes back, so `nc` is a
complete client and there is no clever client to be broken on the day you need
this.
# schdbgd &
schdbgd: debugger on port 4444, loopback only
$ nc 127.0.0.1 4444
dma
arena 0xffff80003da41000-0xffff80003ea41000 16384 KB total, ...
A kernel debugger plus a TCP socket is a remote root hole, so three things were
decided rather than discovered:
- It does not start by itself. schdbgd.job ships Disabled. SchOS has no
kernel command line, so the boot flag the plan asked for is the job
manifest, which is the same thing in this system's own idiom.
- It binds loopback; -a names an address and says so in a paragraph.
- It cannot reach a view that changes state, enforced in the kernel.
That last one is /dev/dbgro: /dev/dbg on minor 1. The minor is the one piece of
per-open state a character device already sees, so which node you opened is the
permission -- nothing to latch, nothing to remember between the write and the
read, no way across. Which views are refused comes from dbg_register_rw() on
the registration itself, because a central list of dangerous views goes stale
in the direction where a new view is quietly treated as safe. Today that is
`watch <addr>`; `watch` with no argument is still the listing and still
answered.
Also: socket() now accepts IPPROTO_TCP with SOCK_STREAM and IPPROTO_UDP with
SOCK_DGRAM. They name the default rather than departing from it, and toybox's
nc writes them out -- so TCP was "Protocol not supported" on a system whose
whole network is TCP.
docs/plan/debugger.md retires into docs/architecture/debugging.md; 16 files
repointed. Every plan in docs/plan/ that was open is now closed, so the next
thing is Gate 0 itself: the survey, with the instrument built.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/ldls.md L3a -- the class bridge, and the first of the three pieces
L3 turned out to be.
/dev/netdev is /dev/pci with the arrows reversed. That hands a device to a
process; this lets a process be one. The kernel side is netdev_ops and nothing
else -- transmit, receive, mac, link_up, the same four entries e1000
publishes -- so a process claims the device, supplies a MAC, and from then on
read() gives it frames the stack wants sent and write() hands it frames that
arrived.
cmd/netecho proves it and is deliberately not a driver: no hardware, none
claimed, every frame answered by the program itself. DHCP so the interface
gets an address at all, ARP so the stack can find it, ICMP so it can be
pinged. All built by hand from RFCs 826, 791, 792 and 2131.
# netecho &
netuser: ldls0 is a process now, 2:4c:44:4c:53:1
netecho: I am 10.9.0.1 and will offer 10.9.0.2
netecho: answered DHCP, offering an address
# cat /proc/netif
interface ldls0 driver netuser address 10.9.0.2 gateway 10.9.0.1
# ping 10.9.0.1 3
netecho: answered an ARP
netecho: answered a ping
3 packets transmitted, 3 received, 0% packet loss
The interface got its address by DHCP from a process and then answered ping
from one. lwIP never learns that the thing behind netdev_ops is not a driver,
which is the whole property the bridge exists to have.
It dies the way it should, too. kill the process and link_up() answers false
immediately, so the stack refuses to send -- "ping: sendto: -5" -- rather than
swallowing packets into a driver that is not there. Start another and the
*same* interface comes back, keeping its address. That came free:
netuser_release_all() sits beside pciuser_release_all() in exit() for exactly
the same reason, and the reason is that a process holding a device is one that
may crash.
One thing the kernel needed: netinit() starts DHCP on the devices that exist
when it runs, so an interface created later -- which is how an LDLS-hosted
driver arrives -- would have come up with no address and no way to get one.
net_attach_late() fixes that, and lives in kernel/net/net.c because that is
the only file allowed to include lwIP's headers.
Recorded as not done, because it is not: this proves the bridge, not a driver.
Nothing in that test loads a module. That is why it was done first -- if ping
had not worked here the bridge would be wrong, and now a failure with a real
driver can only be the driver's side. L3b is the SchOS-side host, L3c is the
fifteen symbols for real, and L3 is the two joined.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md mechanisms 2 and 4: MMIO and DMA to a process.
A process can enumerate the bus, claim a device exclusively, map its BARs and
get memory the device can be pointed at. Proven end to end against an e1000e
-- the exact device class we cannot drive and would want a foreign driver for:
device 7: 8086:10d3 (network)
claimed
BAR0 at 0x81060000, 128 KB
regs[0..3] = 0x00140261 0x00000000 0x00080283 0x00000000
MMIO reaches the device
DMA 8 KB at virtual 0x40001000, physical 0x3f8eb000
Those are the e1000e's CTRL and STATUS with full-duplex and link-up set, which
is how you tell a real mapping from one reading 0xFFFFFFFF off an unmapped
address. Claiming a device the kernel drives is refused -- two writers of one
register set looks like hardware that has started lying -- and everything a
process held is released when it exits, because a driver that crashed must not
keep its hardware away from its replacement.
mmap's offset is the BAR's physical address, checked against the BARs of
devices *this process has claimed*. Without that check the device is /dev/mem
with extra steps and a process could map the kernel's own memory. Mappings are
write-through: a cached write to a doorbell arrives whenever the cache feels
like it, which from a driver's side is indistinguishable from hardware that
ignores you.
The interface is about PCI devices, not about any driver model, and its first
users will be SchOS's own drivers when virtio-gpu is evicted. That ordering is
the design rather than an accident: an interface whose first consumers are
native drivers is a general mechanism something foreign can use later, instead
of a hole shaped like something foreign.
Also: PROT_* and MAP_* moved to include/posix.h. They were defined only in
sys_mem.c, so cmd/fbinfo carried a private copy and this wanted a third --
two copies of a number the kernel compares against, where a mismatch shows up
as a mapping with the wrong permissions rather than an error.
No IOMMU, so this isolates a driver against its own bugs and not against its
own DMA. The plan says so at length and it is still true.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A fresh boot spent 2600 ms in schinit's bootstrap() before printing its first
line, and the whole of it was device nodes. Measured rather than guessed: an
instrumented bootstrap reported 2600 ms on a fresh image and 0 ms on the next
boot, because the nodes already existed by then and mknod failed fast. The cost
was therefore invisible to anyone not building images -- which is to say,
invisible to everyone except whoever works on this.
Each node was a real inode on the root filesystem, and SchFS commits every
mutation as its own transaction group: a copy-on-write rewrite of the path to
the root, then an uberblock behind a cache flush. Twenty of those is seconds.
The duplication mattered more than the time. Major and minor numbers are the
kernel's -- devsw[] in kernel/dev/cdev.c is what they dispatch on -- and schinit
held a second copy of that mapping with nothing checking the two agreed. Adding
a character device meant editing a userspace program, and a wrong minor produced
a node that opened successfully and did nothing.
kernel/fs/devfs.c puts the table next to the thing it describes and serves /dev
behind the same fs_ops vtable procfs uses. The namespace is all it provides:
fileread and filewrite see T_DEV and go through devsw themselves, so a read
never reaches it. It is read-only, and dirlink and ialloc answer EROFS rather
than pretending -- a node exists because the kernel has the device, or it does
not exist.
This also makes /proc/filesystems true. It has advertised "nodev devtmpfs" for
as long as it has existed, against a kernel that had no such filesystem.
Two things found while measuring what remained:
* The thirteen mknod() calls for /proc ran *after* the procfs mount, so every
one was resolving a path into a read-only synthetic filesystem and failing.
procfs.c's own note called them a fallback to be cleaned up later; they have
been dead for longer than that.
* The four mkdir() calls for mount points were the rest of it. They are made
by the image builder now (sysroot-install), and the ones in init are a
fallback -- a mkdir that fails because the directory exists costs a path
walk and no writes, where creating one costs a transaction.
bootstrap() is now 0 ms on a fresh image, down from 2600.
init opens /dev/console after the mount rather than mknod'ing a node called
"console" into the root directory, which is what used to leave a stray /console
in `ls /`. The old path is kept as a fallback: if the mount fails there is no
/dev/console and no way to report it.
socktest passes, /proc still lists per-process directories, ps -e still
enumerates.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz