docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The site and several documents still described the system as it was before
virtual terminals, the new schinit, the hybrid work and descriptor passing.
docs/architecture/init.md described the wrong program. It documented a single
schinit that parses manifests and supervises jobs, which has not been true since
PID 1 was split: PID 1 forks a supervisor, spawns jobs on its behalf and reaps;
the job table lives in /proc/schinit; a heartbeat runs both ways; and
proc_reincarnate() re-execs PID 1 in place rather than panicking. Rewritten
around what exists, keeping the reasoning that is still load-bearing -- the five
failures of the sibling-init scheme, the escalation ladder, and the three bugs in
the reincarnation path that each had to happen before they were obvious.
docs/plan/init.md is deleted, which is the tree's own rule for finished work and
had not been applied. Fourteen source comments referenced it by part number, so
they are repointed at the architecture doc by section name rather than left
dangling -- a deleted document nobody notices is worse than a stale one.
docs/architecture/devices.md gained the section it has been missing since
/dev/pci existed: what a driver needs from a kernel, why mmap is checked against
the caller's claims, why DMA is a call and not a mapping, and why the write back
after an interrupt is not optional. Also that a released device does not come
back by itself, which is true and was nowhere.
docs/architecture/networking.md gained a descriptor-passing section, and
docs/architecture/README.md's stack diagram gained the two layers and the third
seam it was missing. "Two seams hold the whole thing together" has not been true
since /dev/pci.
docs/plan/README.md said the hybrid work was deliberately last, on the argument
that an interface with no consumer is wrong in ways nobody can see. The argument
was right; the conclusion was not, and the document now says why it changed --
the alternative to a driver compatibility layer is writing a driver for every
device that exists, and the original objection is answered rather than ignored
because SchOS's own drivers are the consumers.
The site: a Hybrid section with the eviction transcript, cards for virtual
terminals, schinit and drivers outside the kernel, and the numbers remeasured
rather than estimated -- 46,961 lines, 207 syscalls. The boot log in app.js is
from a boot taken today, and the lines are trimmed to what the console can show
without clipping, each still a verbatim prefix of real output.
Two small rendering fixes found by looking at the pages rather than assuming:
.console pre's min-height is now scoped to the hero, so a static transcript sizes
to its content instead of reserving eight lines it does not have; and the docs
reader's contents panel strips inline marks from headings, so a heading written
`proc_reincarnate()` no longer carries its backticks into the sidebar.
Every intra-doc link checked; none broken.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The sweet spot was available the whole time and I ruled it out by writing
"AltGr+anything" when the true statement is "AltGr+*letter*".
A Polish layout wants AltGr with a letter -- ą ć ę ł ń ó ś ź ż. AltGr with a
function key produces nothing on any layout, no window manager binds it, and
no application asks for it. It is the one combination the host, applications
and the keyboard layout all leave alone, and the previous three commits talked
themselves out of it on a technicality that was mine, not the hardware's.
Verified rather than argued, with QEMU sendkey and screendump hashes:
AltGr+F2 -> tty2
AltGr+F1 -> back, pixel-identical to the start
AltGr+a -> reaches zsh, so ą still types
That distinction is only expressible because Right Alt became its own modifier
bit two commits ago. Sharing ALT is harmless for typing -- neither is used to
look up a character -- and made this impossible to say.
Also added, since it was asked for in the same breath: minus and equals step
to the previous and next terminal, on whatever the chord's modifiers are. They
skip terminals that are not in use -- the same `opened` count VT_GETSTATE
reports -- because six terminals with two shells on them means four blank
screens in between, and cycling past those is worse than not having the key.
AltGr+= -> tty2, again -> wraps to tty1 (only two in use)
AltGr+- -> tty2
chvt -c still moves all of it, and `chvt` reports both halves.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Third guess at a chord, and the third one would have been wrong too: a display
manager that grabs Ctrl+Alt+F<n> matches loosely, so Ctrl+Alt+Shift+F2 never
reaches the guest either. Extra modifiers do not get past a loose grab.
The real problem is that this is not knowable from inside. A key the host
swallowed is indistinguishable from a key nobody pressed, so the guest cannot
probe for a free combination, and there is no combination that is free
everywhere:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6 (loosely matched),
Ctrl+Alt+digit (QEMU's own console tabs)
APPLICATIONS want Alt+anything (Meta -- zsh binds Meta-digit as
digit-argument), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter
So it is a setting. VT_SETCHORD/VT_GETCHORD, and in userspace:
chvt -c ctrl+shift+F Ctrl+Shift+F1..F6 (the new default)
chvt -c ctrl+alt+shift+F
chvt -c alt+1
chvt -c off no chord; chvt N is then the only way
chvt report the active terminal and the chord
`off` is a legitimate setting rather than a failure mode. On a machine whose
host grabs everything worth binding, `chvt N` is the honest answer.
The default moved to Ctrl+Shift+F1..F6: display managers bind Ctrl+Alt+F<n>,
not Ctrl+Shift+F<n>, and Ctrl+Shift with a *function* key is not a character
on any layout -- unlike Ctrl+Shift+digit, which is.
Caught while writing it: VTC_RALT was 0x08 while kbd.h's RALT is (1<<7), since
(1<<3) is CAPSLOCK. A chord set from userspace with AltGr would simply never
have matched, and the only symptom would have been a key that does nothing.
A _Static_assert now holds the two headers together.
Verified: Ctrl+Alt+F2 leaves the screen byte-identical, Ctrl+Shift+F2 switches,
Ctrl+Shift+F1 returns to a pixel-identical tty1, and chvt -c round-trips
through alt+1 and off and back. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+1..6 was a worse choice than the Alt+F-keys it replaced, and the reason
is the one that matters: anything the kernel swallows is taken from every
program that will ever run here, permanently.
Alt+<digit> is Meta-digit. zsh's own line editor binds it as digit-argument --
Alt+1 Alt+2 x repeats x twelve times -- and every readline editor does the
same. Yesterday's chord broke that system-wide, which is exactly the failure
mode of picking a chord applications want.
Working the whole space instead of one axis of it:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6
APPLICATIONS want Alt+anything (Meta), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter -- Polish diacritics
Ctrl+Alt+Shift+F1..F6 is in none of those sets. Display managers bind the same
chord without Shift, so adding it steps out of the host's way, and no terminal
application binds a triple-modified function key.
Which chords actually reach a guest was measured rather than assumed: a
temporary probe in kbdgetc logged every modified keypress and QEMU's sendkey
fired each candidate at it. Everything reached the guest, Ctrl+Alt+F2
included -- so that conflict is the host's display manager, not QEMU. The same
probe corrected an earlier claim: `sendkey altgr-2` produces no event at all,
so the previous commit's "AltGr+2 did not fire" was never actually tested.
And the escape hatch is real now. VT_SETMODE was accepted and ignored, so a
program could ask to own the chord, be told yes, and still not get it.
VT_PROCESS genuinely stops the kernel switching. Together with the EVIOCGRAB
path -- which kbdgetc already checks before the chord is recognised -- there
are three honest layers: nothing, VT_PROCESS, exclusive grab.
What VT_PROCESS still does not do is the VT_RELDISP handshake; struct vt_mode
carries relsig/acqsig for when Schcom needs to release the GPU before the
screen changes hands.
Verified by screendump hash: Alt+2 reaches zsh as Meta, Ctrl+Alt+F2 and
Ctrl+Shift+F2 leave the screen untouched, Ctrl+Alt+Shift+F2 switches.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+F1..F6 was wrong in three separate ways, and the third is the one that
matters most here.
Alt+F4 the host window manager closes the QEMU window
Alt+F2 GNOME and KDE open a run dialog
Ctrl+Alt+F1..F6 the host switches its *own* virtual terminals
AltGr+anything Polish diacritics -- a c e l n o s x z with their marks --
and on some setups AltGr is delivered as Ctrl+Alt
Ctrl+Shift+key widely bound inside applications
Scroll Lock not present on many keyboards
Alt+1..6 survives all of it: the number row, so no function key is involved,
and left Alt, so AltGr is untouched.
Right Alt is tracked as its own modifier bit now. It used to share ALT, which
is harmless for typing -- neither is used to look up a character -- and wrong
for chords, because it made AltGr indistinguishable from Alt.
And the test is an equality rather than a mask:
if ((shift & (CTL | SHIFT | ALT | RALT)) == ALT && ...)
`shift & ALT` fired on Ctrl+Alt+1 and AltGr+1 as well, so a chord aimed at the
host -- or an ordinary Polish keystroke -- would have switched terminals
behind your back. That was a real bug in what shipped yesterday.
Verified with QEMU's sendkey, comparing screendump hashes:
start (tty1) 86cee2284878
Ctrl+Alt+2 86cee2284878 identical -- did not fire
AltGr+2 86cee2284878 identical -- did not fire
Alt+2 114562804a78 switched
Alt+1 86cee2284878 back, pixel-identical to the start
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz