docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Groundwork for the unified loader: before the two paths can share code,
they have to agree on what they are producing, and until now they only
agreed by coincidence.
Every field of the loader/kernel hand-off was #defined in whichever file
happened to need it -- kernel/core/main.c, kernel/dev/vga.c,
kernel/arch/x86_64/e820.c, boot/bios/cdboot.S, boot/bios/stage2main.c and
boot/uefi/main.c, six copies of the same addresses. schboot.h existed for
exactly this and held only the entry magic and the RSDP slot, with a
comment describing the rest of the block it did not define.
The whole block lives there now: the VBE info fields, the verbose and
media flags (with the real-mode segment:offset spelling cdboot.S needs),
the e820 count, map and cap, and the RSDP. Every one of those files
includes it instead of restating it.
This is not a tidy-up. It is the same hazard as defining the entry magic
twice, only quieter -- nothing breaks until one copy moves, and the two
loaders diverging is precisely what produced the EFER.SCE and RSDP bugs,
where a fix on one path silently did not exist on the other.
Verified on both firmwares: BIOS boots to schinit with the same e820,
ACPI and VGA lines as before; UEFI reaches cpu0 with 1018 MB in 7 regions
and its own 1280x800 mode. `make iso` still builds. bootcheck 108 [ok].
Next: the loaders become starters that gather firmware-specific facts and
hand to one common stage. That needs the BIOS side to climb to long mode
first, since common code can only be compiled for one CPU mode -- which
is the risky part, and is why the contract went first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
e820_init() took the usable run *containing the kernel* and treated its
end as the top of RAM, and kinit1() walked a single range from the end
of the kernel image to there. That is the shape of a BIOS map. It is
not the shape of a UEFI one: OVMF places an ACPI NVS region at 8 MB,
so the kernel's run ended there, the map failed the PHYSTOP_MIN check,
and the kernel fell back to asserting 224 MB it had not measured --
then freed straight through the reserved hole anyway.
Keep the usable regions as a list as well as a top address. kinit1()
now frees each one, clipped to the window main() passes in, so the
holes are skipped rather than either freed or fatal. PHYSTOP still
means what it always did -- the top of what kalloc may hand out, and
the bound kfree() rejects pages above -- so no call site changes.
phystop comes from the largest region rather than the highest. The DMA
arena is carved off the top of PHYSTOP and must be physically
contiguous, and the largest region is the only one certain to have
room; a smaller region above it is left unfreed rather than raising
the bound past a hole, because kfree()'s check is worth more than the
pages it costs. Report the usable total separately from the top
address, since with a fragmented map they are different numbers and
printing one as the other is how 8 MB went unnoticed.
Verified on both paths. BIOS: unchanged at 1023 MB in 2 regions,
bootcheck 27/27. UEFI under OVMF: 1018 MB in 7 regions, up from the
8 MB that triggered the fallback, booting through vga, e1000, the RTC
and on to cpu0.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
boot/bios/ now holds the MBR, the El Torito stub and the real-mode stage
2; boot/uefi/ is empty and documented.
Separate directories rather than #ifdefs, because the two share almost
nothing. A BIOS loader lives in 16-bit real mode, reaches the firmware
through software interrupts, and walks itself up into long mode. A UEFI
loader is a 64-bit PE that the firmware has already placed in long mode
with paging on, calling services through a table of function pointers.
What they do share is the hand-off contract, which boot/README.md now
writes down: ELF segments placed, long mode, a 24-byte-entry memory map
at E820_MAP_ADDR, framebuffer geometry at VBE_INFO_ADDR.
That contract is the point of documenting it now. UEFI's GetMemoryMap
returns EFI_MEMORY_DESCRIPTORs, and the right move is to translate them
into the entries kernel/arch/x86_64/e820.c already parses rather than
teach the kernel a second format.
Build output paths under $(BUILD)/boot are unchanged; only sources moved.
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
