What installing and starting Epiphany ran into:
- inotify: inotify_init/init1, add_watch, rm_watch, as a new kind of event
descriptor. The filesystem reports creates, deletes, renames (with a
cookie pairing MOVED_FROM and MOVED_TO), writes, close-after-write,
truncation and attribute changes, to watches on the inode and on its
directory with the name. ONESHOT, MASK_ADD, MASK_CREATE, ONLYDIR,
DONT_FOLLOW, IGNORED on removal, Q_OVERFLOW, and Linux's coalescing of
repeated events. The hooks cost one load when nothing is watched. Without
it GLib found no file monitor and GNOME programs aborted.
- FIONREAD on inotify descriptors and pipes (inotifywait sizes its buffer
by it).
- fsync and fdatasync had no Linux numbers since the first commit: GLib's
atomic writes, gtk-update-icon-cache and dbus-uuidgen all got ENOSYS.
- faccessat2, the flags-taking faccessat musl uses for any flags.
- sendmsg accepts SCM_CREDENTIALS when they are the sender's own, as Linux
checks; GDBus sends them in every handshake and was refused with EINVAL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
SDL 3 has no OSS backend and SchOS has no ALSA kernel side, so sound now
goes SDL -> alsa-lib -> alsa-plugins' OSS plugin -> /dev/dsp. That path
found two bugs underneath it:
- ac97: resetting the PCM-out box also clears the descriptor list address,
and nothing set it again. Every stream after the first stop played a
"list" at physical address 0 -- silence -- and ALSA resets before each
stream. If the engine halts at the end of the queue, the run bit is set
again.
- /dev/dsp: SETFRAGMENT, GETFMTS, GETCAPS, SETTRIGGER, GETOPTR and GETODELAY
for the plugin's ring-and-pointer model, and poll(), writable once a whole
fragment fits (ALSA spun at 76% CPU otherwise). speaker-test now plays in
real time at 0% CPU, verified in a recording of QEMU's AC'97.
- /etc/asound.conf: the default device is a plug to the OSS device at 16-bit
stereo 48 kHz, what every SchOS audio driver plays.
Also:
- getstackpcs: each frame link must go up the same stack by less than
KSTACKSIZE. The chain ends at the syscall entry with the user's rbp,
which lbreakouthd uses as a register (-1024); the walk dereferenced it
under the syscall tracer and the kernel panicked inside acquire().
- fb: FBIOGET_VSCREENINFO reports nominal timings, as Linux's efifb does,
instead of zeros, which Xorg's fbdev turned into a 0 Hz RandR mode.
- procdump (Ctrl-P) shows where runnable threads are in user space.
- World: lbreakouthd instead of lbreakout2 (its stk.c passes vsnprintf a
size of 511 plus the prefix length, and Alpine's fortified headers trap on
that), plus curl, alsa-lib and alsa-plugins.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
- /dev/ptmx and /dev/pts/N: Unix98 pairs with a full line discipline,
window sizes, job control and hangup (kernel/dev/pty.c).
- The console speaks scroll regions, insert/delete line, SU/SD, RI/IND/NEL,
DECSC/DECRC; swallows charset designations and private CSI sequences;
and LF only returns the carriage under ONLCR.
- setsid() drops the controlling terminal, so a pane's pty becomes its ctty.
- pipe2() honours O_NONBLOCK and O_CLOEXEC (libevent's signal pipe).
- File modes are stored and enforced: chmod, fchmod(at), umask, creation
modes; /tmp is 1777.
- /proc/stat has real user/system/idle; /proc/<pid>/task; kthread flag.
- SO_PEERCRED, IOV_MAX 1024.
- /proc/strace: name a program and its syscalls go to the kernel log.
- World gains htop, btop, tmux, mc, ncdu, fastfetch, games, X toys, NetSurf.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
busybox wget hands TLS to ssl_client over a socketpair and then does
shutdown(SHUT_WR). That cut the AF_UNIX link both ways, so ssl_client's
reply was a SIGPIPE and every https:// download hung. SHUT_WR is now a
half-close: the peer reads EOF and can still answer. TCP sockets get
shutdown() at all (tcp_shutdown for the FIN); it used to do nothing.
- exec keeps ignored signals and the signal mask, as execve(2) says.
- /proc/<pid>/fd: a link per descriptor -- the path it was opened by,
socket:[n], pipe:[n], anon_inode:[eventpoll]. /proc/self too. The
global inode bit moves above pid << 8; at 0x10000 it was /proc/256.
- fstat on a socket or pipe answers S_IFSOCK / S_IFIFO instead of EINVAL.
- poll, select and epoll wake as soon as a pipe, socket or input device
changes, not on the next tick.
- Pipes are 64 KB of lazily allocated pages, copied in blocks, with
PIPE_BUF atomicity: 300 MB through `yes | head | wc` in 7 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
There were none: fcntl answered F_SETLK with EINVAL and flock was not a
system call. Alpine's apk, which runs unmodified on SchOS through
Alpine's own musl, locks its database before reading it and stopped
there.
kernel/fs/lock.c keeps one table of advisory locks keyed by (dev, inum):
flock() for the whole file, owned by the open file description;
F_SETLK/F_SETLKW/F_GETLK for byte ranges, owned by the process and
released when it closes any descriptor on the file or exits; and the
F_OFD_* forms, ranges owned by the description. flock and record locks
do not see each other, as on Linux. Waiters sleep until any release and
are interrupted by a signal.
cmd/locktest checks each between a parent and a child, including range
splitting, F_GETLK's report, and a blocked waiter being woken.
shell.nix gains pkg-config, meson, ninja, m4, bison, flex and xz, for
the X ports.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The set libwayland's event loop is made of, in kernel/sys/sys_event.c:
four kinds of descriptor with no inode, FD_EVENT, that read() drains
and poll() reports on. They were table entries returning ENOSYS that
read as done.
epoll registers (descriptor, file) pairs, so a closed descriptor
leaves the set; level- and edge-triggered, EPOLLONESHOT. Waiting is
poll()'s, a tick at a time. The old eventfd and signalfd numbers (284,
282) were aliased to the new calls and read flags from a garbage
register; they are their own entries now, with epoll_create and
epoll_pwait.
cmd/evtest checks each, then all four in one set. The plans are
brought up to date: everything Wayland was waiting on is built except
setsockopt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Sixty-five headers sat side by side in include/, so `#include "irq.h"`
said nothing about where irq.h was or what it belonged to, and errno.h,
stat.h and fcntl.h at the top shadowed the system's for any host tool
built with -I./include. They are in folders now -- arch/ core/ fs/
dev/ gfx/ net/ uapi/ (and ldls/ for the Linux driver layer) -- and
every include names the folder, as Linux's do: "core/proc.h".
Done mechanically and checked the hard way: the kernel built from this
tree disassembles identically to the one built from the tree before
it. The full image boots, and userland is the same set of programs.
Paths in docs and comments follow; docs/guides/layout.md has a table
of what is where, and tools/fix-includes.py rewrites old-style
includes from the folders in the tree, for code written before this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The inode table was NINODE (200) entries, searched end to end on every
iget(), and a panic -- "iget: no inodes" -- when all of them were held.
Held means open, a cwd, a running binary or a directory mid-walk, so a
few busy processes reached it. iget() now finds an inode through a hash
on (dev, inum), takes a free one from a list, and makes more from a
slab cache once the NINODE in the image are all in use.
The open-file table had the same shape, NFILE (512) and then ENFILE,
and gets the same treatment: a free list, and the slab past NFILE.
/proc/fsstat's peaks now read against how many exist.
getrlimit(RLIMIT_NOFILE) said unlimited, which musl turns into
sysconf(_SC_OPEN_MAX) == -1, after which zsh believed it had no
descriptors and `exec {fd}<file` failed on the first one. It reports
NOFILE now. And a comment in sys_fs.c held a "*/" that ended it early.
Checked under QEMU: six processes holding 115 files each, 713 open
descriptions and 341 inodes at once, all back to the baseline after.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The filesystem every other system can read: a USB stick, an SD card, the
EFI system partition. It is here first for the hardware report, which has
to leave a machine on something that can be read on another one.
mount -t vfat /dev/usb0p1 /mnt (msdos and fat work too; -o ro)
Written from Microsoft's specification, and matched to Linux vfat where
the specification leaves a choice: 8.3 names with the NT lowercase bits,
long-name entries otherwise, Linux's alias rule (REPORTS, then BIGNUM~1),
case-insensitive lookup, UTC times, the boot-sector dirty bit, every FAT
copy and FSInfo kept up to date. It uses its own sector cache over the
new blkdev_xfer, since a partition need not be a whole number of 4 KB
blocks, and every operation that changes something reaches the disk
before it returns. Inode numbers come from the entry position, or the
first cluster for a directory, plus a small table for entries that moved.
Around it:
- /dev lists every disk and partition the block layer found (major 8,
minor = block device), and raw reads and writes on them go by sector.
- The ESP and MBR FAT partitions are registered, typed so the root probe
passes over them. MBR entries with a bad status byte are skipped, so a
superfloppy's boot code is not read as a partition table.
- statfs, sync, fsync, umount (EBUSY while in use), shutdown, reboot and
the power button all know about FAT.
- create undoes and reports a failed ialloc or dirlink (ENOSPC, EINVAL,
EPERM) instead of panicking; fs_ops gains refuse_types and no_hardlinks.
- filewrite returns a short write instead of panicking on it.
- utimensat is implemented. As a stub returning 0 it made toybox touch
believe the file existed, so `touch newfile` created nothing on any
filesystem.
Tested in QEMU against mkfs.vfat images (FAT12 floppy, FAT16 on MBR,
FAT32 superfloppy and GPT ESP) by writing, renaming, deleting, filling to
ENOSPC and truncating there, then checking with fsck.fat -n and mtools on
the host: all clean, contents match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Gate 1, item 2, and the thing a Wayland buffer crosses on.
memfd_create(2) is the same segment machinery shmget() already had -- pages,
refcounts, no_free VMAs, the fork and exit accounting -- reached by
**descriptor** rather than by System V key. That difference is the entire
point and the reason it exists on Linux at all: two processes share memory by
passing the fd over a socket, so neither has to agree on a path or race to
invent a key. It is also why SCM_RIGHTS had to be item 1.
docs/plan/foundations.md proposed exactly this and it was right: what memfd
adds on top of shmget is a segment that starts empty and is sized by
ftruncate(), and a file that owns one reference to it. FD_MEMFD, and
read/write/lseek/fstat all learn about it -- a descriptor that refuses read()
is a surprise nobody needs.
Three things are refused rather than faked, each the honest version of
something this kernel cannot do:
- MAP_PRIVATE on a memfd. Every caller is sharing on purpose; a private
mapping of an anonymous object is an expensive MAP_ANONYMOUS.
- Mapping past the end. Linux faults those pages in; there is no handler
here that could.
- Shrinking while mapped. Linux truncates the pages out from under the
mapper; here a freed page would stay mapped to memory somebody else now
owns.
Writable MAP_SHARED of a *real file* is still ENODEV. That needs a page cache,
and an anonymous object has no such contract to break -- which is precisely
why memfd is the narrow answer.
**cmd/memfdtest**, seventeen checks, written so a permissive implementation
cannot pass: an mmap that quietly returned private zeroed pages satisfies every
return code and fails the one assertion that matters, because the reader is a
different process. It ends with the combination the plan singled out -- a memfd
sent over a socketpair to a receiver that closes every inherited copy first,
maps only the descriptor that arrived, reads what the sender wrote and writes
back where the sender can see it.
Two things were found by writing that test, both of which had been refusing
everything that was not FD_INODE:
- sys_fstat() never reached filestat(), so the memfd branch there was
unreachable from the syscall that needs it. It also refused pipes and
sockets, and returned -1 (which musl reads as EPERM) rather than an errno.
- sys_lseek() the same, and SEEK_END needs a length that is not in an inode.
Verified: 40 consecutive runs leave MemFree at exactly the value it started
at -- 936656 kB before and after -- so nothing leaks across creation, dual
mapping, descriptor passing and exit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
sendmsg/recvmsg with SCM_RIGHTS. Item 1 of docs/plan/foundations.md and
mechanism 1 of docs/plan/hybrid.md, which are the same primitive seen from two
directions: Wayland's wl_shm_create_pool passes a file descriptor with no
integer-shaped alternative, and handing a driver process the device it is
allowed to touch is the same act. Both plans stopped here.
Linux's structures byte for byte -- msghdr, cmsghdr, the CMSG_ macros -- because
the programs that need this are not ours. libwayland and toybox both call
recvmsg with Linux's headers and would not notice a friendlier door.
The delivery rule is the whole design. A batch of descriptors is pinned to the
stream position of the first byte of the message that carried it, and that has
two halves: a reader arriving at that position is handed them, and a reader that
has not reached it is stopped SHORT of it. Leave out the second half and a
program asking for 4096 bytes swallows three messages and is handed one
message's descriptors, with nothing in the result saying which. socktest checks
exactly that: two one-byte messages, an eight-byte read, one byte back.
The kernel holds a reference to every descriptor in flight, so a sender may
close its own copy the moment sendmsg returns. Giving that reference back is the
part that leaks if it is not written down, and there are three ways a message
ends:
- received with room installed in the receiver's table
- received without room, or by
plain read(2) closed; MSG_CTRUNC for the first case
- never received, socket closed closed by sockclose
The middle row looks like a choice and is not: holding kernel references for a
receiver that has proved it is not looking is a leak with extra steps.
No garbage collector. A socket descriptor sent over that same socket and never
received holds a reference to the socket that holds the reference to it, and
neither close reaches zero. Linux carries several hundred lines for this.
Nothing on either plan passes a socket over a socket -- Wayland passes memory,
the driver work passes devices -- so it is a bounded leak that is documented
rather than a silent one.
Fourteen checks in cmd/socktest, and every one moves data through the descriptor
rather than inspecting it. The descriptor passed is always a pipe end, because a
pipe announces its own lifetime: a read of a pipe whose writers are all gone
returns 0, which turns "was the kernel's reference released" -- otherwise
invisible from userspace -- into a value a test can compare.
Two bugs fell out, neither in the new code:
- sockpair() never set the socket's domain, so every socketpair() socket
claimed domain 0. Invisible while the data paths asked only whether a socket
was AF_INET or AF_NETLINK, since zero answers "neither" correctly.
SCM_RIGHTS asks "is this AF_UNIX", and zero is wrong for that one.
- pipe_poll() reports POLLHUP but not POLLIN at end of file, so a non-blocking
read of a pipe whose writers had all gone returned EAGAIN forever instead of
0 -- a program that polls and reads spins waiting for an end that already
happened. sockreadable() always had the equivalent condition; the pipe path
did not. Found because the test helper for "is this descriptor closed" is a
non-blocking read of a pipe.
projects/schcom/README.md said SCM_RIGHTS was done for a long time while nothing
in the kernel implemented it, and an entire GUI plan was drawn on that line.
It is true now, which is not the same as it having been right, and the README
says so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Everything created after boot was stamped 1970. know() in SchFS and now_sec() in
the v1 filesystem both returned uptime(), under comments saying the kernel had no
wall clock -- which stopped being true when time_init() started reading the RTC.
The comments outlived the condition they described.
Two errors, and the second is the less obvious: uptime() counts 10 ms *ticks* and
they were being used as *seconds*, so a node created 0.6 s into boot read back as
00:01:00 and the clocks ran a hundred times too fast. Both now go through
wallclock(), which exists precisely so nothing can disagree with gettimeofday
about the time. Confirmed against the RTC line from the same boot.
The occupancy counters are the instrumentation docs/plan/roadmap.md asked for
while hunting the ls -lR hang: inode, file and pinned-buffer counts with a
high-water mark each, maintained at the 0->1 and 1->0 transitions rather than by
scanning, so they cost one increment on a path that already holds the table's
lock.
The peaks are the diagnostic. A live count only describes the moment you looked,
and a reference leak is invisible in it right up until the table is full -- at
which point iget() panics and filealloc() returns 0, which is where the trail
used to go cold.
What they measured: across ten iterations of ls -lR with writes interleaved, 33
execs and 13378 tree descents, inode_peak stayed at 9/200, file_peak at 9/512 and
buf_pinned_peak at 1/256, with the SchFS bracket unlocked throughout. That
eliminates the roadmap's own hypothesis -- "a lock or reference-count leak
somewhere in the *at() paths" -- and the hang did not reproduce. It is very
likely fixed in passing by the *at() dirfd rewrite, the getdents cookie rewrite
or SchFS becoming the root, all of which landed after it was reported.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The last three phases of the filesystem, which were written together and
touch the same files throughout -- kmount.c, objw.c and vfs.c are each
rewritten by all three -- so they land as one commit rather than three
that could not be built separately.
Durability. A transaction that reaches the platter out of order is worse
than one that never reached it: the uberblock can name a tree whose
blocks are still in the drive's write cache. bdirty/bflush give the
buffer layer an explicit barrier, ideflush issues ATA FLUSH CACHE and
usb_storage_flush the SCSI SYNCHRONIZE CACHE that means the same thing,
and a commit now waits for the data before it writes the root that
points at it. The uberblock groups are read newest-first with fallback,
so a volume whose newest roots are torn mounts at an older one and says
which generations were lost.
Reflink. Extents carry a refcount, so two objects can name the same
blocks and neither frees them while the other holds them. Exposed as
FICLONE -- Linux's ioctl value, so `cp --reflink` works unmodified --
and as cmd/reflink for the case where there is no cp to hand.
Attributes, and the one genuinely new idea here. attr.c stores named
values on an object, reachable through setxattr/getxattr/removexattr at
Linux's syscall numbers. On top of that, schfs_index declares an index
over an attribute name and schfs_query answers "which objects carry this
value" from the B-tree rather than by walking. A query against an
unindexed attribute is refused with an error, never silently answered by
a full scan: a query that quietly becomes a scan is worse than one that
admits it cannot help. cmd/schattr drives both.
Three bugs fixed on the way, each found by the numbers being wrong
rather than by inspection:
- statfs's f_fsid was declared int64[2]. Linux's fsid_t is two *ints*,
so every field after it landed one slot late: userland read f_frsize
out of f_namelen, got 255, and df reported a 32 MB root filesystem
as 1992 KB. It hid for as long as it did because the fields used to
be invented constants, so wrong numbers looked like the usual ones.
- struct inode's nlink was a short against SchFS's uint32, so a file
past 32767 names came back negative -- and iput frees an object
whose count reaches zero. It is an int now, signed on purpose, so an
underflow lands somewhere a check can see rather than wrapping.
- filewrite split every write to fit v1's log. That limit belongs to
the journal, not to writing, and SchFS makes one transaction of
whatever it is handed: a 1 MB write was becoming 170 commits and
170 flushes for nothing. fs_ops carries max_write now, and SchFS
sets no limit.
Also here: a real mount table, so `mount -t schfs /dev/hdb /mnt` shows
up in /proc/mounts -- df looks a path up there before it calls statfs at
all, so a mount missing from that list was invisible to it -- several
volumes mounted at once, snapshots mounted by name, and /proc/fsstat
with an rdtsc-based counter, which is the only instrument fine enough to
see inside a single syscall.
Verified: `make schfs-check` passes in full, including the sweep that
crashes the volume at each of 119 points mid-transaction and requires
every one to mount with exactly its committed data, and the case where
both newest uberblocks are rubbish and the volume still comes back. The
headless boot check passes with 27 [ok] and no failures, on a SchFS root.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
