docs/plan/hybrid.md mechanisms 2 and 4: MMIO and DMA to a process.
A process can enumerate the bus, claim a device exclusively, map its BARs and
get memory the device can be pointed at. Proven end to end against an e1000e
-- the exact device class we cannot drive and would want a foreign driver for:
device 7: 8086:10d3 (network)
claimed
BAR0 at 0x81060000, 128 KB
regs[0..3] = 0x00140261 0x00000000 0x00080283 0x00000000
MMIO reaches the device
DMA 8 KB at virtual 0x40001000, physical 0x3f8eb000
Those are the e1000e's CTRL and STATUS with full-duplex and link-up set, which
is how you tell a real mapping from one reading 0xFFFFFFFF off an unmapped
address. Claiming a device the kernel drives is refused -- two writers of one
register set looks like hardware that has started lying -- and everything a
process held is released when it exits, because a driver that crashed must not
keep its hardware away from its replacement.
mmap's offset is the BAR's physical address, checked against the BARs of
devices *this process has claimed*. Without that check the device is /dev/mem
with extra steps and a process could map the kernel's own memory. Mappings are
write-through: a cached write to a doorbell arrives whenever the cache feels
like it, which from a driver's side is indistinguishable from hardware that
ignores you.
The interface is about PCI devices, not about any driver model, and its first
users will be SchOS's own drivers when virtio-gpu is evicted. That ordering is
the design rather than an accident: an interface whose first consumers are
native drivers is a general mechanism something foreign can use later, instead
of a hole shaped like something foreign.
Also: PROT_* and MAP_* moved to include/posix.h. They were defined only in
sys_mem.c, so cmd/fbinfo carried a private copy and this wanted a third --
two copies of a number the kernel compares against, where a mismatch shows up
as a mapping with the wrong permissions rather than an error.
No IOMMU, so this isolates a driver against its own bugs and not against its
own DMA. The plan says so at length and it is still true.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A timer interrupt that arrives while interrupts are disabled is not delayed,
it is lost -- the LAPIC in periodic mode holds one pending interrupt and drops
the rest. So anything the kernel does with interrupts off for longer than
10 ms makes `ticks` run slow, and it never catches up.
That has now presented twice as "uptime is wrong": once as an interrupt storm
taking 83% of the CPU, once as heavy console output on a display that is
expensive to draw to. Both times the tick was the messenger, and both times it
looked like a timekeeping bug.
monotonic() reads the TSC instead. It is a counter in the silicon that
advances whether or not this kernel is paying attention, it is already
measured against the PIT at boot, and reading it is one instruction and no
lock. wallclock(), /proc/uptime, sysinfo, getrusage and times() all go through
it now.
`ticks` keeps the job it is good at -- the scheduler preempts on it, sleep()
counts it -- where losing one means a slightly longer sleep rather than a
wrong answer about what time it is.
Lost ticks are no longer harmful, which makes them invisible, which is worse.
So /proc/interrupts now says
timer: 3383 ticks taken, 3387 expected
and names the gap when it grows, because a machine dropping timer interrupts
is spending too long with interrupts disabled, and that is worth knowing
before it turns into a clock that lies.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Third guess at a chord, and the third one would have been wrong too: a display
manager that grabs Ctrl+Alt+F<n> matches loosely, so Ctrl+Alt+Shift+F2 never
reaches the guest either. Extra modifiers do not get past a loose grab.
The real problem is that this is not knowable from inside. A key the host
swallowed is indistinguishable from a key nobody pressed, so the guest cannot
probe for a free combination, and there is no combination that is free
everywhere:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6 (loosely matched),
Ctrl+Alt+digit (QEMU's own console tabs)
APPLICATIONS want Alt+anything (Meta -- zsh binds Meta-digit as
digit-argument), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter
So it is a setting. VT_SETCHORD/VT_GETCHORD, and in userspace:
chvt -c ctrl+shift+F Ctrl+Shift+F1..F6 (the new default)
chvt -c ctrl+alt+shift+F
chvt -c alt+1
chvt -c off no chord; chvt N is then the only way
chvt report the active terminal and the chord
`off` is a legitimate setting rather than a failure mode. On a machine whose
host grabs everything worth binding, `chvt N` is the honest answer.
The default moved to Ctrl+Shift+F1..F6: display managers bind Ctrl+Alt+F<n>,
not Ctrl+Shift+F<n>, and Ctrl+Shift with a *function* key is not a character
on any layout -- unlike Ctrl+Shift+digit, which is.
Caught while writing it: VTC_RALT was 0x08 while kbd.h's RALT is (1<<7), since
(1<<3) is CAPSLOCK. A chord set from userspace with AltGr would simply never
have matched, and the only symptom would have been a key that does nothing.
A _Static_assert now holds the two headers together.
Verified: Ctrl+Alt+F2 leaves the screen byte-identical, Ctrl+Shift+F2 switches,
Ctrl+Shift+F1 returns to a pixel-identical tty1, and chvt -c round-trips
through alt+1 and off and back. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+1..6 was a worse choice than the Alt+F-keys it replaced, and the reason
is the one that matters: anything the kernel swallows is taken from every
program that will ever run here, permanently.
Alt+<digit> is Meta-digit. zsh's own line editor binds it as digit-argument --
Alt+1 Alt+2 x repeats x twelve times -- and every readline editor does the
same. Yesterday's chord broke that system-wide, which is exactly the failure
mode of picking a chord applications want.
Working the whole space instead of one axis of it:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6
APPLICATIONS want Alt+anything (Meta), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter -- Polish diacritics
Ctrl+Alt+Shift+F1..F6 is in none of those sets. Display managers bind the same
chord without Shift, so adding it steps out of the host's way, and no terminal
application binds a triple-modified function key.
Which chords actually reach a guest was measured rather than assumed: a
temporary probe in kbdgetc logged every modified keypress and QEMU's sendkey
fired each candidate at it. Everything reached the guest, Ctrl+Alt+F2
included -- so that conflict is the host's display manager, not QEMU. The same
probe corrected an earlier claim: `sendkey altgr-2` produces no event at all,
so the previous commit's "AltGr+2 did not fire" was never actually tested.
And the escape hatch is real now. VT_SETMODE was accepted and ignored, so a
program could ask to own the chord, be told yes, and still not get it.
VT_PROCESS genuinely stops the kernel switching. Together with the EVIOCGRAB
path -- which kbdgetc already checks before the chord is recognised -- there
are three honest layers: nothing, VT_PROCESS, exclusive grab.
What VT_PROCESS still does not do is the VT_RELDISP handshake; struct vt_mode
carries relsig/acqsig for when Schcom needs to release the GPU before the
screen changes hands.
Verified by screendump hash: Alt+2 reaches zsh as Meta, Ctrl+Alt+F2 and
Ctrl+Shift+F2 leave the screen untouched, Ctrl+Alt+Shift+F2 switches.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Three symptoms, two causes, both in the terminal layer.
**The grid and TIOCGWINSZ disagreed about the size.** vt_init() sizes every
grid from gfx_cols()/gfx_rows(), and it runs at main.c:75 -- while the display
driver attaches its scanout from the PCI bus walk at main.c:99. So the grids
were the 80x24 fallback, and TIOCGWINSZ, which computed its own answer live,
said 160x50.
That one disagreement produced all three things visible in the report: text
stopped two thirds of the way down the screen, `ls` laid out 160 columns into
an 80-column grid so words split across the wrap ("vers" / "ion"), and zsh's
cursor tracking was wrong on every line.
Fixed in two places, because either alone would leave the trap set:
gfx_attach_scanout() now calls vt_resize(), so the grids learn the real screen
the moment there is one; and TIOCGWINSZ reports v->cols/v->rows rather than
measuring again. One number, from the terminal being asked.
**Wrapping was eager.** A glyph printed in the last column moved the cursor to
the next line immediately. Real terminals set a pending-wrap flag and wrap when
the *next* glyph arrives -- which is why a line exactly as wide as the screen
takes one row and not two, and why a program can write the bottom-right cell
without scrolling.
zsh's partial-line marker depends on that rule directly: it writes exactly
COLUMNS-1 spaces and expects to still be on the line. With eager wrap it left a
reverse-video '#' above every prompt, which is the hashtag in the report. Both
are gone.
Verified by screendump: `ls /proc` now fits one line with "version" intact, no
markers, and output fills the screen to the last row. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Porting zsh found four defects in the kernel and one in the filesystem. None
of them were about zsh; all of them had been there the whole time.
**exec threw the environment away.** kernel/fs/exec.c wrote a single zero for
envp with the comment "(no environment)" -- not yet, but ever, for every
process. musl has been passing a perfectly good envp to execve (Linux 59, which
SchOS answers) and it was never read. So $TERM was unset, $PATH was whatever
each program invented, and a variable exported in a shell did not survive the
exec meant to carry it. exec() takes an envp, sys_exec reads argument three,
and schinit manifests grew an Environment key. The userland two-argument
exec(path, argv) stays as a wrapper that passes null explicitly -- the raw stub
is execve now, so a short caller cannot leave %rdx holding a stray pointer.
**Which overflowed the kernel stack.** Three pointer arrays, ~1.8 KB, on a
4096-byte stack, under exec -> loaduvm -> readi -> SchFS -> btree. Pid 1 went
down on the first exec. The canary caught it and named the process, which is
what it is for. They live in one kalloc'd page now.
**waitpid returned a bare -1** for both "no children" and "interrupted". musl
reads [-4095,-1] as -errno, so userspace saw EPERM; zsh printed "wait failed:
operation not permitted" and abandoned the rest of /etc/zsh/zshrc. -ECHILD and
-EINTR now. Third time a bare -1 has cost real time -- on a system with no
permission model, EPERM should be read as "a syscall returned -1".
**NVMA was 64.** musl's allocator takes a mapping per size class and does not
release them eagerly, so compinit ran out of slots and got -1, which is EPERM,
which malloc turns into NULL, which zsh reports as "fatal error: out of memory"
-- on a machine with 1000 MB free. 256 slots, and -ENOMEM.
**And a small write to SchFS costs 58 ms.** 200 writes to one open file take
11.75 s; the same to /dev/null take 0.14 s. That is the design stated at the
top of kmount.c -- one transaction group per operation, and a commit is two
flushes and an uberblock -- not a bug. But compdump writes its digest with
thousands of separate prints, so it takes minutes and looks like a hang.
compinit -D, which skips the dump, finishes in 3.6 s. This one is a decision
rather than a fix, so it is written up and left: /etc/zsh/zshrc keeps compinit
switched off and explains exactly why, with the measurements.
zsh runs as /bin/zsh and is the console shell. ZLE works -- arrow keys recall
history through terminfo, $COLUMNS reads the real 160 because TIOCGWINSZ was
fixed, colour and prompt expansion work, startup is 0.14 s. mksh keeps /bin/sh,
so schinit's no-jobs fallback is a different program from the one that could
have failed.
Also fixed while here: AT_CLKTCK was the literal 100 and is USER_HZ; the
extract rule in four ports could move a source tree inside itself when make
re-ran it, which is how zsh's configure came to write modfile=zsh-5.9/... into
config.modules and fail three steps later.
schfs-check passes. Full writeup in docs/history/kernel.md section 14.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported 3 seconds of uptime after 15 real ones, `time` claimed
3.12s for a 20-second command, and ping's one-second interval was closer to
six. One cause, not three: `ticks` was advancing at ~14.5 Hz instead of 100.
It was not the timer. virtio-gpu-pci shares IRQ 11 with the e1000 and
registered no interrupt handler at all. PCI INTx is level-triggered, so the
device held the line asserted, the kernel signalled EOI, and it fired again
immediately -- 72,000 interrupts a second, 83% of CPU0, starving the tick.
The e1000's handler read ICR as zero half a million times, correctly
answering "not mine", which is what made it look like a network-free problem.
Reading virtio's ISR byte clears it and drops the line. That is the fix.
irq_dispatch now measures each line's rate against the TSC -- not ticks,
which is the first casualty of a storm -- and names the attached handlers
once above 20000/s. It reproduces the original fault as a single line.
Found along the way, and fixed because they were real:
- lapicinit loaded TICR with xv6's uncalibrated 10000000, whose own comment
admitted it was never measured. calibrate_timers() now measures the LAPIC
and the TSC against the 8254 PIT. (It came back at 999.9 MHz, so this was
not the bug -- but the next machine is not obliged to be 1 GHz.)
- microdelay() was an empty function body. Every microdelay(1000) in the
xHCI reset path and the USB hub power-on sequence returned instantly.
- HZ is a constant in param.h now, not the literal 100 written out at a
dozen ticks-to-seconds conversions. USER_HZ is separate and deliberately
does not follow it: musl answers sysconf(_SC_CLK_TCK) with 100 always, so
times() and /proc/stat scale at the syscall boundary the way Linux does.
- TIOCGWINSZ answered a hardcoded 24x80. gfx_cols()/gfx_rows() have known
the real geometry all along; at 1024x768 the console is 128x48, so every
program that lays out a screen was formatting for the wrong one.
- TCFLSH fell through to the catch-all `return 0`, claiming to discard
input without discarding any.
uptime now advances 5.01 seconds per 5 real seconds. schfs-check passes.
Full investigation, including the two wrong hypotheses and the measurement
flaw that protected them, in docs/history/kernel.md section 13.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A fresh boot spent 2600 ms in schinit's bootstrap() before printing its first
line, and the whole of it was device nodes. Measured rather than guessed: an
instrumented bootstrap reported 2600 ms on a fresh image and 0 ms on the next
boot, because the nodes already existed by then and mknod failed fast. The cost
was therefore invisible to anyone not building images -- which is to say,
invisible to everyone except whoever works on this.
Each node was a real inode on the root filesystem, and SchFS commits every
mutation as its own transaction group: a copy-on-write rewrite of the path to
the root, then an uberblock behind a cache flush. Twenty of those is seconds.
The duplication mattered more than the time. Major and minor numbers are the
kernel's -- devsw[] in kernel/dev/cdev.c is what they dispatch on -- and schinit
held a second copy of that mapping with nothing checking the two agreed. Adding
a character device meant editing a userspace program, and a wrong minor produced
a node that opened successfully and did nothing.
kernel/fs/devfs.c puts the table next to the thing it describes and serves /dev
behind the same fs_ops vtable procfs uses. The namespace is all it provides:
fileread and filewrite see T_DEV and go through devsw themselves, so a read
never reaches it. It is read-only, and dirlink and ialloc answer EROFS rather
than pretending -- a node exists because the kernel has the device, or it does
not exist.
This also makes /proc/filesystems true. It has advertised "nodev devtmpfs" for
as long as it has existed, against a kernel that had no such filesystem.
Two things found while measuring what remained:
* The thirteen mknod() calls for /proc ran *after* the procfs mount, so every
one was resolving a path into a read-only synthetic filesystem and failing.
procfs.c's own note called them a fallback to be cleaned up later; they have
been dead for longer than that.
* The four mkdir() calls for mount points were the rest of it. They are made
by the image builder now (sysroot-install), and the ones in init are a
fallback -- a mkdir that fails because the directory exists costs a path
walk and no writes, where creating one costs a transaction.
bootstrap() is now 0 ms on a fresh image, down from 2600.
init opens /dev/console after the mount rather than mknod'ing a node called
"console" into the root directory, which is what used to leave a stray /console
in `ls /`. The old path is kept as a fallback: if the mount fails there is no
/dev/console and no way to report it.
socktest passes, /proc still lists per-process directories, ps -e still
enumerates.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported "getifaddrs(&ifAddrStruct) failed", and the right answer to
that is not a patch to fastfetch. Asking what interfaces a machine has is
something every networked program does, and on Linux there is exactly one way:
a NETLINK_ROUTE socket. musl implements getifaddrs() over it, so a libc call
that looks like a syscall is really a small protocol conversation -- and without
this side of it every caller fails the same way.
kernel/net/netlink.c is a responder rather than a general socket family. No
event stream, no multicast groups, nothing subscribes to link state: a request
arrives, the whole answer is generated into the socket's buffer, and reads drain
it. That shape is chosen, not a shortcut -- getifaddrs sends a dump and reads
until NLMSG_DONE with MSG_DONTWAIT, so generating at send time means a read
never blocks and the non-blocking flag is honoured for free.
RTM_GETLINK returns one RTM_NEWLINK per interface with IFLA_IFNAME and
IFLA_ADDRESS; RTM_GETADDR returns one RTM_NEWADDR per address with IFA_ADDRESS,
IFA_LOCAL and IFA_LABEL. Anything else gets a bare NLMSG_DONE, because the
caller's next move is a read either way and an unexpected error message is worse
than nothing to read.
The data is not netlink's. Interfaces come from the netdev class and addresses
from lwIP's netifs, exactly as /proc/netif reads them; nothing in the file knows
what an e1000 is. Interface indices matter more than they look -- getifaddrs
matches address records to link records by index, so the two dumps have to
agree. Loopback is 1, netdevs follow from 2.
Verified by reading it back through musl rather than by inspecting the bytes:
lo flags=0x49 fam=-1
eth0 flags=0x1043 fam=17 (AF_PACKET, the MAC)
lo flags=0x49 fam=2 addr=127.0.0.1 mask=255.0.0.0
eth0 flags=0x1043 fam=2 addr=10.0.2.15 mask=255.255.255.0
Correct flags, addresses and netmasks, and the link records pair with the
address records.
One thing this does not close: fastfetch's Local IP module defaults to
default-route-only, which calls ffNetifGetDefaultRouteIfName() and reads
/proc/net/route. SchOS has no routing table and no such file, so the module
still shows nothing -- now for a reason that is about routing rather than about
enumeration. That is the next file to provide.
socktest still passes; the AF_UNIX and AF_INET paths are untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
setsockopt was `return 0;` and getsockopt wrote a zero for whatever was asked.
The comment said it was so a server setting SO_REUSEADDR and treating failure as
fatal would not fail. That trade is the wrong way round: a caller told "no"
adapts, a caller told "yes" changes its behaviour on the strength of it -- sets
SO_RCVTIMEO and then blocks forever in a read it believes will time out, sets
TCP_NODELAY and reports latency numbers that measure Nagle. The failure is
silent, remote from the call, and indistinguishable from a bug in the stack.
Six options are honoured now and everything else is ENOPROTOOPT. SO_REUSEADDR,
SO_KEEPALIVE, SO_BROADCAST and TCP_NODELAY reach lwIP's pcb; SO_SNDBUF/SO_RCVBUF
are accepted and report the real size on read. SO_REUSEADDR is implemented rather
than refused precisely because of the original comment's concern -- it is the one
option a server really does set and really does check.
accept4 becomes its own table entry rather than an alias for accept. It has to
be: accept takes three arguments, so a shared handler reading a fourth register
reads whatever the caller last left there and invents a SOCK_NONBLOCK out of
stack litter. SOCK_CLOEXEC and SOCK_NONBLOCK are now honoured by socket(),
socketpair() and accept4() -- a dropped CLOEXEC leaks a listening socket across
every exec, and a dropped NONBLOCK has the caller block forever in what it
believes is a poll loop.
ICMP ping sockets: socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP), on lwIP's raw API,
with the callback stripping the variable-length IP header. Only echo replies are
eaten, and that restriction is load-bearing -- raw_input runs before lwIP's own
icmp_input, so consuming every ICMP message would swallow the echo *requests* and
this machine would silently stop answering pings from outside.
Loopback, so 127.0.0.1 is a real destination. LWIP_NETIF_LOOPBACK is the half
that is easy to miss: without it a packet addressed to an interface's own address
goes out of the wire and never comes back. With NO_SYS=1 nothing drains the
loopback queue, so the network thread calls netif_poll_all().
cmd/ping is first-party rather than toybox's, and the reason is a limitation not
a preference: toybox reads replies with recvmsg(2) and wants the TTL through an
IP_RECVTTL control message, and SchOS has neither. recvmsg is item 1 of
docs/plan/foundations.md, where it is wanted for SCM_RIGHTS anyway, and should
not be rushed to make one applet run.
Two bugs found on the way. Every AF_INET socket failed with ENFILE until DHCP
bound, because inet_new() demanded an *address* before handing out a socket and
reported it as "file table overflow"; net_is_ready() (lwIP up) is now distinct
from net_is_up() (DHCP bound). And that bug was hiding a bad test: socktest
asserted "AF_INET is refused, not faked", true when written, false since AF_INET
landed, and green the whole time because the suite runs before DHCP binds and the
ENFILE made the refusal look real. Fixing the kernel is what turned it red.
Verified: ping to 127.0.0.1, localhost, the gateway, 1.1.1.1 and 9.9.9.9, all
0% loss; socktest ALL CHECKS PASSED with ten new checks, including a setsockopt
round trip and an unknown option that must be refused -- a permissive stub cannot
pass both at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Same disease as the network stack, one subsystem over. kernel/dev/vga.c
was three things wearing one name: the owner of the framebuffer, a
bitmap drawing library, and the text console. Only the first is a
driver, and because they shared a file they shared a prefix -- so
panic.c drew the crash screen with vga_fill_rect, console.c printed with
vga_putc, /dev/fb0 handed out vga_fb_phys, and every one of those files
named a display driver it had no business knowing about.
Split three ways:
- kernel/drivers/gpu/vga/vga_fb.c owns the VBE framebuffer -- the mode
the loader programmed and handed over, the aperture, and the display
class vtable. It is a driver and now lives with the driver that
finds the card on the bus.
- kernel/dev/gfx.c draws: pixels, shapes, glyphs, the cursor, scroll,
the ANSI erase operations. It names no driver. The framebuffer
arrives through gfx_attach_scanout(), so a driver publishes what it
owns and this file draws on it without knowing what it is.
- include/gfx.h is the interface, and says why it is deliberately not
the display class: that one is about frames -- acquire, present,
vblank -- and the crash screen has to work when nothing else does.
main() no longer calls a display driver. platform_register_devices()
takes the framebuffer address and brings up whatever owns it, which is
where driver names belong; kernel/drivers/registry.c is the file whose
entire job is naming every driver in the kernel.
virtio-gpu got the e1000 treatment as well: instances in an array, the
instance hung on dev->priv by an `attached` hook, and every op reading
it rather than a file-static. It refused the second adapter outright
before, which is not hypothetical -- integrated plus discrete is an
ordinary laptop. The VGA driver deliberately has no such hook, and says
so: there is one framebuffer the loader programmed however many
VGA-class controllers the bus turns up, and a second one publishing the
same scanout is the truth rather than a bug.
Private headers moved next to their drivers: include/virtio.h and
include/xhci.h each had exactly one includer. include/ is for headers
the rest of the kernel needs.
Deleted rather than moved: consoleinit() programmed the sixteen ANSI
colours into the VGA DAC and disabled text-mode blink, by writing ports
0x3C0-0x3C9 from the console. The comment three lines above the colour
table already said this does nothing in a 32bpp linear mode -- there is
no palette to index -- so it was both dead and in the wrong file.
Verified, and this is a refactor so the evidence is that nothing moved:
- bootcheck -Fb -Net: 59 [ok], no failures. That covers the console
through every command, /dev/fb0's geometry, writing pixels through
write() and mapping the framebuffer through mmap.
- make crashshot: the crash screen renders exactly as before --
shapes, glyphs, logo and QR code -- which is the whole of gfx.c
exercised at once, in a panic, with the scanout attached by a driver.
- make schcom-test: five pixel assertions from the host oracle still
pass, so the display class and the compositor above it are unmoved.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The second of the two things the stack owed. recvfrom accepted the
address arguments and ignored them, so every caller was told nothing
about where a datagram came from -- which for UDP is most of the point:
a server that cannot see the sender cannot reply to it.
Fixing it properly meant fixing something worse that was sitting
underneath. UDP payloads went into the same byte ring TCP uses, with no
record of where one datagram ended and the next began, so two datagrams
that arrived together came back from one read as one. That is a bug
whose appearance depends on timing and whose blame lands on the sender.
Datagrams now carry a header alongside the bytes: source address, source
port, length. Sixteen of them per socket, in a ring beside the existing
one. Whole buffers would have been 16 sockets x 16 datagrams x an MTU of
static memory for something almost always empty; only the boundaries need
keeping, and those are eight bytes each. A datagram too big for the
buffer it is read into is truncated and the remainder discarded, rather
than left in the ring to be delivered as the head of the next one. One
that arrives with the queue full is dropped whole -- that is UDP's own
contract, and half a datagram in the ring would corrupt every one after.
An empty queue and a zero-length datagram are kept apart, because a
sender really can send zero bytes and the right answer to that is 0
rather than "nothing has arrived yet".
sendto grew the mirror image: a destination address on a datagram
socket, which is what a server replying to whoever just wrote to it
needs. On TCP a destination is ignored rather than refused -- the
connection decides where the bytes go, and programs pass one out of
habit. For a stream, recvfrom's source is read from the pcb: it is the
peer, and it is the same answer for every byte.
Verified: bootcheck -Net now covers UDP too, 45 [ok] and no failures.
The address check is real rather than cosmetic -- nettest deliberately
leaves its sockaddr uninitialised, so a kernel that filled in nothing
would print stack rubbish instead of 10.0.2.2 and the port the responder
is actually on. The boundaries are checked by byte count: the responder
sends 20 bytes and then 16, and the guest reports reading 20 and then
16. Treated as a stream the first read would have taken all 36.
Left for later, and deliberately: accept() still does not report the
peer's address, and getsockname/getpeername do not exist.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
lwIP 2.2.0, fetched by ports/lwip and compiled straight into the kernel.
Not written from scratch, and the reason is not the packet formats: it is
congestion control, retransmission, window management and twenty years of
corner cases that only show up against a real peer. Not FreeBSD's
netinet either, though the licence would have allowed it -- that stack is
not a library, it reaches into mbufs, epoch(9), netisr, VNET and uma(9),
so adopting it means porting FreeBSD's kernel infrastructure first. lwIP
was written for exactly this situation: a small kernel with a raw
Ethernet driver and a port layer of a few hundred lines.
It is kernel code, so nothing is installed into the sysroot and there is
no second build system: the top-level Makefile compiles the files it
wants against our port headers. The file list is explicit rather than a
wildcard, because lwIP ships IPv6, 6LoWPAN, PPP, SLIP, DNS-SD and a dozen
apps in the same tree, and building what is not configured yields either
dead code or a link error naming a port function nobody meant to write.
Its sources are unmodified and its warnings are silenced for its files
only -- patching them would mean maintaining a fork.
The port layer is ours: a lock, a clock, the netif that hands frames to
e1000, lwipopts.h, and a shim/ directory of tiny headers so lwIP's
<string.h> and friends resolve to the kernel's functions instead of the
host's, whose prototypes disagree and would otherwise be found on the
default include path.
NO_SYS=1, so lwIP has no threads of its own and one kernel thread feeds
it. A thread rather than the interrupt handler, because a call into lwIP
can reach the driver, the driver can sleep, and an interrupt handler
cannot -- so the interrupt still only clears the cause register and the
thread polls. kthread_create is new and generally useful: a process with
a kernel-only page directory, no files, no cwd, no parent, dispatched
from forkret, which can therefore sleep and be preempted like anything
else. DHCP obtains an address at boot and the console says which one.
AF_INET went in exactly where phase 2 said it would. socknew dispatches
on the domain, kernel/net/inet.c implements the internet side on lwIP's
raw API, and not one syscall changed shape: bind, connect, listen,
accept, read and write reach the same descriptors they always did. TCP
and UDP both work. cmd/nettest opens a connection, writes, and reads the
answer back.
Two things are owed and named here so they are not discovered later:
recvfrom does not yet report the source address, and the socket paths
poll on the timer tick instead of sleeping on the socket. Both are
follow-ups, not redesigns.
NOTICE carries lwIP's BSD-3 text. Clause 3 is no-endorsement, not the
old advertising clause, so it sits with Apache-2.0 without difficulty.
Verified: the tree builds clean, and the headless boot check passes with
27 [ok] and no failures with the stack compiled in and the thread
running -- which is the part that would break first if netinit deadlocked
or the thread starved anything. An end-to-end connection test belongs in
that suite and is the next commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The last three phases of the filesystem, which were written together and
touch the same files throughout -- kmount.c, objw.c and vfs.c are each
rewritten by all three -- so they land as one commit rather than three
that could not be built separately.
Durability. A transaction that reaches the platter out of order is worse
than one that never reached it: the uberblock can name a tree whose
blocks are still in the drive's write cache. bdirty/bflush give the
buffer layer an explicit barrier, ideflush issues ATA FLUSH CACHE and
usb_storage_flush the SCSI SYNCHRONIZE CACHE that means the same thing,
and a commit now waits for the data before it writes the root that
points at it. The uberblock groups are read newest-first with fallback,
so a volume whose newest roots are torn mounts at an older one and says
which generations were lost.
Reflink. Extents carry a refcount, so two objects can name the same
blocks and neither frees them while the other holds them. Exposed as
FICLONE -- Linux's ioctl value, so `cp --reflink` works unmodified --
and as cmd/reflink for the case where there is no cp to hand.
Attributes, and the one genuinely new idea here. attr.c stores named
values on an object, reachable through setxattr/getxattr/removexattr at
Linux's syscall numbers. On top of that, schfs_index declares an index
over an attribute name and schfs_query answers "which objects carry this
value" from the B-tree rather than by walking. A query against an
unindexed attribute is refused with an error, never silently answered by
a full scan: a query that quietly becomes a scan is worse than one that
admits it cannot help. cmd/schattr drives both.
Three bugs fixed on the way, each found by the numbers being wrong
rather than by inspection:
- statfs's f_fsid was declared int64[2]. Linux's fsid_t is two *ints*,
so every field after it landed one slot late: userland read f_frsize
out of f_namelen, got 255, and df reported a 32 MB root filesystem
as 1992 KB. It hid for as long as it did because the fields used to
be invented constants, so wrong numbers looked like the usual ones.
- struct inode's nlink was a short against SchFS's uint32, so a file
past 32767 names came back negative -- and iput frees an object
whose count reaches zero. It is an int now, signed on purpose, so an
underflow lands somewhere a check can see rather than wrapping.
- filewrite split every write to fit v1's log. That limit belongs to
the journal, not to writing, and SchFS makes one transaction of
whatever it is handed: a 1 MB write was becoming 170 commits and
170 flushes for nothing. fs_ops carries max_write now, and SchFS
sets no limit.
Also here: a real mount table, so `mount -t schfs /dev/hdb /mnt` shows
up in /proc/mounts -- df looks a path up there before it calls statfs at
all, so a mount missing from that list was invisible to it -- several
volumes mounted at once, snapshots mounted by name, and /proc/fsstat
with an rdtsc-based counter, which is the only instrument fine enough to
see inside a single syscall.
Verified: `make schfs-check` passes in full, including the sweep that
crashes the volume at each of 119 points mid-transaction and requires
every one to mount with exactly its committed data, and the case where
both newest uberblocks are rubbish and the volume still comes back. The
headless boot check passes with 27 [ok] and no failures, on a SchFS root.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two loose ends from the mount-by-name commit, both closed.
A slot is a device number, so supporting more than one snapshot is a
small array rather than a redesign: SCHFS_SNAP_DEV through
SCHFS_SNAP_DEV + SCHFS_SNAP_SLOTS - 1, each with its own volume and its
own scratch pages, allocated on first use. Four of them -- "one at a
time" is an odd thing to have to explain, and the cost is two pages per
slot. Not many, because each one is a device number and those are a
small fixed space.
The leak mattered more. umount removed the mount table entry and left the
slot marked in use, so a snapshot could be unmounted and then never
mounted again until reboot. sys_umount2 releases it now, keyed off the
device it already has in hand.
Verified in the running system: two snapshots mounted at once, both
readable, both unmounted, and a third mount afterwards succeeds and reads
correctly -- which is the case that failed before.
schfs-check passes; bootcheck 108 [ok].
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`mount -t schfs @golden /mnt` mounts a snapshot. The source argument
finally means something: sys_mount ignored it outright, because there was
one volume and nothing to choose between. `@name` rather than a path
because a snapshot is not a device -- there is no node in /dev for it and
there should not be, since it lives inside the volume already mounted.
A second volume rather than a parameter threaded through all 23 schfs_k*
entry points. Only the read side can ever address it, so the write path
keeps talking to the live volume and needed no change; the four read
entry points grew _dev variants and pick the volume from the device the
inode already carries. One fs_ops table serves both, because every entry
takes an inode and dispatches on it -- a second table would be the same
pointers under a different name.
It needs its own device number: a snapshot's object ids are the *same
numbers* as the live tree's, so one device would make the two views alias
in the inode cache and hand a reader whichever was cached first.
Three things this turned up, none of them new but all of them reachable
for the first time:
- sys_mount refused with `dev == SCHFS_DEV`, meaning "do not mount SchFS
onto SchFS". A snapshot's mount point is necessarily on the live root,
so that refused the entire feature. The real condition is mounting a
device onto *itself*, which is `dev == fsdev`.
- createat allocates an inode and then panics if dirlink fails --
reasonable about a writable filesystem, a crash on a read-only one.
The refusal now happens before anything is allocated. Unlink and
rename already handled a refusal properly.
- a refused create reported ENOENT, so writing to a snapshot said "No
such file or directory" -- the sentence a shell prints for every
create failure. It reports EROFS now.
Verified in the running system against an image built with
--snapshot golden: the mount succeeds, ls lists the snapshot's tree,
/mnt2/etc/motd reads back through it, and a write is refused with
"Read-only file system".
One at a time, and no umount path for it yet: mount_del_by_root removes
the mount table entry, but ksnap_unmount is only called on the failure
paths. schfs-check passes; bootcheck 108 [ok].
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Nothing outside the kernel could touch a disk. sys_mount does not even
look at the device it is handed -- it mounts the one SchFS volume found
at boot and ignores `source` -- so a program had no way to read a
partition table, format a volume or write a boot sector. An installer is
a program that needs all three, so this is the first piece of it.
A character device in devsw rather than a separate block layer, because
that is where the offset already lives: fileread/filewrite pass f->off
and advance it by what comes back, which is everything a seekable device
needs. The minor is the IDE device number, the same numbering iderw()
uses; two schemes for the same disks would be a bug waiting to happen.
Writes bypass every filesystem above them, which is inherent to a raw
device and why an installer must target a disk it has not mounted.
The nodes are created unconditionally, like every other entry in /dev.
That matters more than it looks: with no node, `echo x > /dev/hdb`
silently creates an ordinary file of that name and appears to work. It
did, and it agreed with itself on read-back; only the host's copy of the
disk showed nothing had been written.
st_rdev was never filled, so every node in /dev reported "0, 0" under
ls -l. Harmless while nothing read it, wrong as soon as something has to
tell two disks apart. Filled with the full Linux dev_t encoding rather
than (major << 8 | minor), which only works while both stay small.
Verified against the host as an independent oracle, both directions: the
guest wrote to /dev/hdb and the host saw those bytes at offset 0; the
host wrote at offset 4096 and the guest read them back with dd skip=.
ls -l now shows 1,1 for console, 2,0 for fb0 and 8,1 for hdb.
Known limit, commented in disk.c: devsw passes the offset as a 32-bit
uint, so a raw disk is addressable to 4 GB. That must be widened before
anyone installs onto a real disk.
bootcheck 108 [ok] with -Fb -Tty -Usb -Sock -Evdev -Ps.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz