fastfetch reported 3 seconds of uptime after 15 real ones, `time` claimed
3.12s for a 20-second command, and ping's one-second interval was closer to
six. One cause, not three: `ticks` was advancing at ~14.5 Hz instead of 100.
It was not the timer. virtio-gpu-pci shares IRQ 11 with the e1000 and
registered no interrupt handler at all. PCI INTx is level-triggered, so the
device held the line asserted, the kernel signalled EOI, and it fired again
immediately -- 72,000 interrupts a second, 83% of CPU0, starving the tick.
The e1000's handler read ICR as zero half a million times, correctly
answering "not mine", which is what made it look like a network-free problem.
Reading virtio's ISR byte clears it and drops the line. That is the fix.
irq_dispatch now measures each line's rate against the TSC -- not ticks,
which is the first casualty of a storm -- and names the attached handlers
once above 20000/s. It reproduces the original fault as a single line.
Found along the way, and fixed because they were real:
- lapicinit loaded TICR with xv6's uncalibrated 10000000, whose own comment
admitted it was never measured. calibrate_timers() now measures the LAPIC
and the TSC against the 8254 PIT. (It came back at 999.9 MHz, so this was
not the bug -- but the next machine is not obliged to be 1 GHz.)
- microdelay() was an empty function body. Every microdelay(1000) in the
xHCI reset path and the USB hub power-on sequence returned instantly.
- HZ is a constant in param.h now, not the literal 100 written out at a
dozen ticks-to-seconds conversions. USER_HZ is separate and deliberately
does not follow it: musl answers sysconf(_SC_CLK_TCK) with 100 always, so
times() and /proc/stat scale at the syscall boundary the way Linux does.
- TIOCGWINSZ answered a hardcoded 24x80. gfx_cols()/gfx_rows() have known
the real geometry all along; at 1024x768 the console is 128x48, so every
program that lays out a screen was formatting for the wrong one.
- TCFLSH fell through to the catch-all `return 0`, claiming to discard
input without discarding any.
uptime now advances 5.01 seconds per 5 real seconds. schfs-check passes.
Full investigation, including the two wrong hypotheses and the measurement
flaw that protected them, in docs/history/kernel.md section 13.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
struct file already carried a uint64 offset and bread already took a
uint64 block number. The narrowing was one boundary in the middle:
devsw's read and write took a 32-bit uint, so fileread passed a 64-bit
f->off into a 32-bit parameter and the top half was discarded.
The effect was not a refusal at 4 GB but silent wraparound past it. A
read at 5 GB returned the bytes at 1 GB, reporting success. disk.c had a
DISK_MAX_BYTES constant documenting the limit, and nothing anywhere
referenced it -- the cap was described but never enforced, which is the
worst of the three options.
The signature is now uint64 across all nine files that carry it, and
diskread/diskwrite no longer narrow the block number on the way to
bread. Widening this is a prerequisite for NVMe and for any real disk:
namespaces start well above 4 GB and the failure mode reads valid data
from the wrong place.
Verified end to end rather than by inspection. A 6 GB sparse image with
"PAST4GB-MARKER-OK" written at byte 5368709120, attached as /dev/hdb to a
ramdisk-root kernel so device 1 was free:
# dd if=/dev/hdb bs=4096 skip=1310720 count=1 | od -c | head -2
0000000 P A S T 4 G B - M A R K E R - O
Under the old code that offset truncates to 1 GB, where the image is
zeroes. The whole path is exercised: f->off, devsw, diskread, bread and
ide.c's LBA48.
Worth recording for next time: `make ramroot` stages the ESP itself, and
running `make esp` afterwards rebuilds the kernel without RAMROOT and
silently undoes it. The tell is a 855 KB kernel where a 25 MB one is
expected.
110 [ok], no failures, on the default build.
Groundwork for usb-tablet, which is the fix for the guest cursor and the
host's never being in the same place: a PS/2 mouse reports how far it
moved, two pointers accumulating deltas independently drift apart, and no
amount of care in the compositor can make them agree. An absolute device
reports where it is, so they coincide by construction.
- the HID driver no longer matches the boot subclass only. usb-tablet
declares subclass 0 and was refused at the door; hid_probe decides
what an interface actually is, and still declines what it cannot make
sense of.
- a non-boot HID interface is taken to be an absolute pointer and is
not asked for boot protocol, which it does not have -- that request
failing is what stopped it binding.
- tablet_report decodes the fixed 6-byte layout (buttons, 16-bit X,
16-bit Y, wheel) and scales the logical range to pixels there,
because it is the only place that knows the range.
- input_mouse_abs reports EV_ABS/ABS_X/ABS_Y so a reader can tell an
absolute position from a delta, and mouse_set_abs places the pointer
rather than nudging it.
- Schcom treats EV_ABS as authoritative and EV_REL as a nudge.
The device binds and identifies correctly: "usb-hid: tablet (absolute) on
slot 1, endpoint 0x81 every 4 ms".
It is NOT finished, and QEMU_INPUT is empty by default because of it. No
reports have yet been observed arriving on the tablet's interrupt
endpoint, so making it the default pointer would trade a cursor that
drifts for one that does not move at all. Opt in with
make qemu QEMU_INPUT='-device qemu-xhci,id=xhci -device usb-tablet,bus=xhci.0'
Next step is to find out why nothing arrives: whether the first transfer
is queued but never completes, whether a completion needs re-arming for
this endpoint, or whether QEMU is not routing motion to the tablet at all
(`info mice`).
bootcheck 108 [ok], schcom-test passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
