A laptop has no serial port, and the machine we are trying to boot stops with
the loader's splash still on screen. Three completely different things look
exactly like that: the jump never landed, the kernel started and hung, or the
kernel started and panicked with a full report drawn into a framebuffer nobody
can see. They call for different next steps, so the kernel now says which
without needing a console at all.
**A bar, as the kernel's first act.** Eight lines of accent colour across the
top of the framebuffer, written straight through the handoff block before a
single subsystem exists -- no gfx, no scanout, no allocator, nothing that can
itself fail. If it appears over the splash, the jump landed and the kernel is
executing. If it does not, nothing below that point is worth looking at.
Skipped when the framebuffer is above the direct map, because a fault there
leaves the machine quieter still, and free on a boot that works: the console
clears the screen a few lines later.
**Blinking keyboard lights, on panic.** Scroll, Num and Caps together, about
three times a second, for ever. It is the one output every PC has had since
before any of this existed -- no driver, no interrupt, no memory -- and it
works when the graphics do not. Linux does the same thing for the same reason.
Every wait in it is bounded. It runs after `panicked` is set so there is
nothing left to protect, but a machine that hangs inside its own death rattle
tells you less than one that stops quietly. The delay is microdelay, which
spins on the TSC: no timer, no interrupt, no calibration -- all three of which
a kernel that died during boot may not have.
That makes the three cases distinguishable from across the room: no bar and no
blink is a jump that did not land; a bar and no blink is a kernel that hung; a
blinking keyboard is a panic, and the report is in /proc/kmsg after a restart.
**And the loader now describes the mode it is actually handing over**, not only
the one the firmware started in. On a machine where changing the resolution
loses the splash entirely, the difference between those two lines is the bug
report; on a boot that works nobody sees either, because ClearScreen runs a few
lines later.
Verified: `echo c > /proc/sysrq`, then QMP polled for five and a half seconds
afterwards -- the machine answers throughout and a screendump still shows the
panic report intact, so the blink loop runs without faulting, resetting, or
scribbling on what it is there to accompany. Both supported configurations
boot clean with the early bar in place.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two reports from an Asus TUF FA607NU, which now gets as far as the splash:
the progress bar does not move, and after a resolution change the screen keeps
the background colour with no mark and no bar. Both point at the same code,
and it is code this loader did not have a week ago.
**Modes were being matched on every frame.** mirrors_match() ran from inside
mirrors_show(), so every menu redraw and every segment of the kernel load
asked another display adapter to change mode. On QEMU that is instant and
idempotent. On real hardware a mode set can take the best part of a second, can
blank a panel while it happens, and -- on a laptop -- is quite often being
asked of the *same* panel reached through a second GOP. A loader that does that
in the middle of drawing a progress bar is a loader that shows a background
colour and then waits on a firmware call that is not coming back.
It now happens exactly once, at discovery, before anything is drawn. The
second head is centred and cropped afterwards rather than re-moded, and the
booted system matches resolutions anyway because the kernel driver and vgpud
both follow the console.
**And mirroring no longer runs per segment of the kernel load.** Copying a
megabyte-and-a-half framebuffer to every other adapter, three times, to animate
a bar on a screen nobody is looking at.
**One refusal now turns it off for the rest of the boot**, and
`\schos\nomirror` -- an empty file whose only job is to exist -- turns it off
before it starts. There is no console to ask a question on at that point and no
menu to reach if the menu is what is broken, so the answer has to already be on
the volume. That also makes it a one-file experiment on hardware we cannot
instrument.
**The loader names its stages on screen.** After the splash, print() goes to
the serial port and nowhere else, so on a machine with no serial port a stall
leaves a progress bar and no information at all. Every stage after the kernel
load now labels itself under the bar -- Reading the console font, Reading the
memory map, Leaving the firmware -- so the last thing on the screen names the
call that did not return. Past ExitBootServices there is nothing left to report
with, which is itself worth knowing: a machine stopped on the last label
stopped in the jump.
Opening the boot volume moved ahead of the display, because what is on the
volume now decides some of what the display does.
Both supported configurations: one boot each, no traps, no panics, socktest and
memfdtest green. Mirroring still verified end to end -- F8, a resolution
change, boot, and both heads byte-identical at the new mode.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The first piece of real-hardware work, and it is three bugs that QEMU cannot
show you. The report was an ASUS laptop -- Ryzen 7000-series APU, Radeon
integrated, RTX discrete -- booting to a white underscore on a black screen,
and unable to be offered 1920x1080.
**The framebuffer address was truncated.** The loader handed over
`(UINT32)gop->Mode->FrameBufferBase` and the kernel read a 32-bit field out of
a VBE mode-info block -- a *BIOS* structure the UEFI path had been filling in
because the kernel already knew how to read one. A machine that puts its
aperture above 4 GB, which is ordinary on a laptop with a discrete GPU, got a
plausible-looking address pointing at nothing. The splash went into it, the
kernel was handed it, and the firmware's own cursor kept blinking on an
otherwise black screen. Every step in that sequence succeeded on a number that
was wrong, which is why there is no error message anywhere in it.
SCHBOOT_FB_BASE is the loader's own display block: 64-bit address, 64-bit
size, 32-bit width, height and stride, and the pixel format. The VBE block is
still written for the BIOS loader, but anything that does not fit is left at
zero rather than wrapped -- a truncated address is this bug, and a zero is at
least honest.
The kernel then has a problem the loader does not: its direct map covers the
low 4 GB, so a framebuffer above it needs ioremap(), which needs kpdpt, which
kvmalloc() has not allocated when the early console starts. A low framebuffer
is attached exactly as before; a high one is attached immediately after
kvmalloc(), still thousands of lines before anything else.
**There was more than one adapter, and the first one was taken.**
LocateProtocol answers with *a* GOP and the specification says nothing about
which. QEMU with a stdvga and a virtio-gpu has **three** handles and two of
them are Blt-only with a framebuffer address of zero -- so this is not a
hardware-only hazard, it was a one-in-three chance of drawing into address 0
that happened to keep coming up heads. Every handle is scored now: no
aperture, no candidacy; a readable current mode beats one that needs changing;
size breaks the tie.
**mode_usable() rejected modes real machines have.** A padded scanline (every
GPU that aligns its rows -- and very likely the reason 1920x1080 could not be
offered), a width not divisible by eight (1366x768, which is half the laptops
in the world), and anything below 800x600 (the only mode some firmware gives
over a KVM). All three passed on QEMU, which is why they survived. The mode
list now offers 1366x768 and 640x480 where it did not.
The loader also prints what it found, to the firmware's text console, which is
cleared before the splash: invisible on a boot that works, and the only thing
on the screen on a boot that dies before the splash.
One process note, recorded because it cost a wrong test: `make UEFI_KEEP=1`
ships the loader that is already built. Its own comment says "a build that
quietly ships a stale bootloader is how you spend an evening debugging code
that is not running", and that is exactly what happened -- a regression run
that looked clean had tested the old loader. Loader work gets a full build.
Both supported configurations verified after a clean build: one boot each, no
traps, no panics, socktest and memfdtest green, and the adapter report shows
the right one being chosen out of three.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The three F8 screens painted into the framebuffer and nowhere else. That is
right on a machine with a screen and useless on one driven over a serial cable
-- which is how this loader is usually driven, and which f8_window() already
went out of its way to support: it accepts 'o' as well as F8 because, in its
own words, "a serial console sends no scan codes at all".
So the prompt invited a serial user in, drew them a menu they could not see,
and then blocked for ever on a key they had no way to choose. The whole visible
behaviour was:
Press F8 for boot options...
<nothing, for ever>
Each screen echoes itself to COM1 now -- the boot menu, the resolution list and
System Information. The whole thing once on entry, then one line per *move*;
not on every keypress, because a serial terminal has no cursor to paint over
and an unrecognised key would scroll the selection past again for nothing.
Straight to COM1 rather than through print(): print() goes to ConOut until the
splash is up, and ConOut on a machine with graphics draws its text across the
menu that was just painted there.
Two details found by actually driving it, neither cosmetic:
- **The item number is shown only where it is a key you can press.** The boot
menu takes 1-5. The resolution list takes only W/S and Enter and is longer
than nine entries, so numbering it printed ':', ';', '<' past the ninth --
a character nobody can type, offering to select something.
- **Q goes back as well as Esc.** A lone ESC byte on a serial line is
indistinguishable from the start of an escape sequence, so the terminal
driver holds it back waiting for the rest and it never arrives as a key.
Esc is the obvious thing to press on a screen and unreachable on a cable --
the same shape of problem as F8, and the same answer.
Driven end to end over serial: open the menu, walk it with W/S, open System
Information and come back, open Resolution and come back with Q, then boot.
The graphical menu is unchanged apart from the hint now naming Q.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two reports, and the first one was not an F8 bug at all.
**Choosing "Boot SchOS (verbose)" appeared to do nothing.** The menu worked,
the flag crossed, and the kernel really did boot verbose -- and then the
machine *reset* partway through and the second boot was quiet. So what anybody
ended up looking at was an ordinary boot, which reads as "verbose is broken".
PROBE before startothers, ncpu=2 <- verbose boot
SchOS UEFI loader <- the firmware, again
PROBE before startothers, ncpu=2 <- quiet boot
PROBE after startothers
mpmain() opened with
kinfo("cpu%d: starting\n", cpunum());
enable_sse();
idtinit();
and the order is the bug. enable_sse() clears CR0.EM; until it runs, *any* SSE
instruction on that CPU faults, and the kernel is not built with -mno-sse, so
the compiler emits them freely for struct copies and inline memset. idtinit()
loads that CPU's IDT; until it runs there is nowhere for a fault to go. So the
#UD is not a panic -- it is a double fault with no handler, then a triple
fault, then the firmware comes back up. A triple fault prints nothing, which is
why there was no last line to go on.
**Why only on a verbose boot**, which is what disguised it as an F8 problem:
kinfo() is log-only when the boot is quiet, so the work is a few bytes into a
ring and no XMM is involved. A verbose boot renders that same line through the
TrueType rasteriser, and that is where the SSE lands.
Setup first, announcement second. The general rule, stated where the next
person will meet it: a processor announces that it is up after it is able to
run, not before.
Verbose now boots once and puts the whole log on the screen -- `verbose boot:`
lines, `cpu1: starting`, the mount, `schinit: ready`, the jobs starting -- which
is what F8 was for and what a machine with no serial port needs.
**And vgpud drew a test card.** Three colour bands, four gradients, a
checkerboard, and the driver's own pid in binary along the bottom edge. That
was scaffolding for hybrid.md's H2 and H3: a screenshot had to answer "did a
*userspace process* put this here", and "did the driver come back" needed a
restarted instance to look different from one that never stopped. Both
milestones closed a while ago and the test card stayed, so a second display
showed something garish with nothing to explain it.
It draws the Shift mark on SCH_BG now, from the same include/logo.h the loader
splash and the kernel console use. That answers the same question a black
screen cannot -- something is driving this device -- as the system rather than
as a test rig.
Also: vgpud's "no control socket" line is vputs, not puts. It is progress, not
news, and it was printing on the console of every quiet boot.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`#define ROOTDEV 1` -- IDE disk 1 -- so a kernel could only ever root on the
disk it was *built* expecting. Booting the same image from a USB stick was
impossible by construction, and that was the one thing standing between this
kernel and its own acceptance test, which begins "boot on real hardware from a
USB stick".
rootdev_mount() probes. schfs_kmount() was already written for exactly this --
its own comment says "the uberblock scan doubles as the probe: no valid
uberblock means this is simply not a SchFS volume, which is not an error worth
reporting loudly" -- and a failed probe leaves the slot unmounted and reusable,
which is what makes a loop over candidates legal at all. So the change is one
function and one call site; the only real use of ROOTDEV was `schfs_kmount()`.
Order is preference, not confidence: a RAMDISK_ROOT build wins outright, then
USB, then IDE 1, then IDE 0. USB before the fixed disks because a stick that is
plugged in was plugged in on purpose. iderw() panics on an absent drive rather
than failing, so each candidate is checked with ide_disk_present() /
usb_storage_present() first -- which is what those predicates are for.
Verified with **no IDE disk attached at all**: boots, mounts the stick, writes
a file, and the file is still there on the next boot.
[ 0.000021] root: USB disk (device 3)
And when nothing matches, it names what it looked at, because "no root
filesystem" with no list is the least useful thing a kernel can say at the one
moment somebody needs to know which disk it expected:
root: no SchFS volume on any candidate device. Looked at:
device 3, USB disk: not present
device 1, IDE disk 1: not present
device 0, IDE disk 0: present, but no SchFS on it
**That message is also how dmesg turned out to be broken**, because it did not
appear in `dmesg` and should have. `dmesg` printed *nothing at all*, on a
system whose boot banner says "or dmesg once you are in" and whose entire
quiet-boot design is "route the detail into the kernel log and say how to read
it". The log was there the whole time -- `cat /proc/kmsg` has always worked --
but the one command anybody would reach for could not see it.
Two separate faults, each alone enough:
- **sys_syslog() was `return 0`.** dmesg does not read /proc/kmsg; it calls
klogctl(10) for the buffer size and klogctl(3) to read. 0 to the first one
means "the log is zero bytes", and a stub that answers 0 is
indistinguishable from a machine that logged nothing. Implemented for the
actions that mean something here; the rest return -EINVAL rather than 0,
because a console log level this kernel does not have is not a request that
succeeded.
- **With that fixed, dmesg was still empty.** It parses every line with
`sscanf(msg, "<%u>[%llu.%llu] %n", ...)` and silently drops anything that
does not match. The ring's `[ 0.00] text` already matches everything
after the priority -- scanf skips the leading spaces -- so the only missing
thing was the `<6>`. klog_render_syslog() adds it on the way out rather
than storing it: the ring is also what a person reads with `cat
/proc/kmsg` and what PSOGM points at after a crash, and an ABI detail
belongs at the boundary that has the ABI.
Also: the first version of the no-root diagnostic printed
%-11s device 1596400
because cprintf() has no field-width specifier -- it prints "%-11s" literally
and then reads the next argument for the %d. Plain %s now, with the note.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A boot printed about thirty lines before reaching a prompt. Every one was
useful once, and printed on every boot for ever they train the person in front
of the machine to stop reading their own console -- which is expensive on the
day one of them changes.
SchOS UEFI loader
Press F8 for boot options... booting
Welcome to SchOS! (F8 at boot for the full log, or dmesg once you are in)
root@schos / »
**Nothing was deleted, it was routed.** consputc() already wrote to the klog
ring before anywhere else, so a line can be kept in full while being held back
from the two places a person looks. kinfo() is cprintf() with that routing, and
`dmesg` still has the whole boot with timestamps afterwards. The rule for which
is which is not how interesting a line is -- everything was interesting to
somebody once -- but whether you would want to see it on a machine that is
*working*. `pci: 7 devices` is yes the first time and no every time after;
`e1000: no DMA memory for the rings` is yes for ever and stays a cprintf.
The verbose boot the F8 menu already offered now means something much bigger,
which is the other half of this: it is the only way to see any of it live.
Userspace follows through /proc/bootmode, one word. schinit, schinitd and vgpud
hold back their progress lines and never their failures -- a supervisor that
goes quiet when a job dies is worse than one that chatters.
Two things found by testing rather than by reading:
- schinit read /proc/bootmode *before* bootstrap() mounted /proc, so it got
"quiet" every time and the verbose boot was quiet in the one process that
runs first. It reads after the mount now.
- resolvconf announced "already exists; -f to replace it" on every boot after
the first, which is a line about having done nothing. It is quiet when the
file already says what it would have written, and speaks only when the two
disagree -- which means the nameserver changed and the machine is using the
old one.
Verified both ways: quiet boot is six lines, a forced-verbose build prints all
thirty plus the `verbose boot:` steps, and /proc/kmsg holds every line in both.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The failure this is against is not scope creep. It is abandonment by promotion:
a thing gets built to the point where it works, the next thing becomes more
interesting, and the first is left in a corner -- in the tree, not finished, not
deleted, and not in any list. Enough of those and the tree stops matching its
own documentation.
docs/plan/1.0.md now holds the register, and it is the only place anything
half-built is listed. Four sections, because the kinds are genuinely different:
built and connected to nothing (the text layer, a font from disk, socket
activation, wait_vblank); started and stopped part-way (foundations 2-5, hybrid
H2, Schcom v0, a released PCI device that nothing brings back); named in a "what
it does not do" and still true; and frozen -- scoped, unstarted, not to be
started. The rule is that nothing enters except by being finished or deleted,
and that adding a row requires closing one.
1.0.md already said "two things in flight, never three". It was right and it was
not being followed.
Then the corners themselves, because a register written over a tree full of them
is just a longer list:
- cmd/init is deleted. Nothing had execed /bin/init since initcode.S changed
to /bin/schinit; it was built and installed on every image as an unreachable
fallback, and an unreachable fallback rots rather than saves.
- projects/schwm/ and projects/schde/ are deleted. Both said "to be deleted"
in their own first paragraph, which proves only that a directory marked for
deletion is not deleted by being marked. README-only, no code lost, and the
arguments each made are moved into wayland.md where they are still true.
- projects/schcom/schcom and schcom-demo were tracked binaries. Untracked, and
.gitignore'd.
Three code comments and one document described a boot that has not happened
since 7d44eb7. cons_serial_only starts set, but kmain clears it on its first
lines now, so the splash does not survive the boot and the kernel log is on
screen from the start. That reversal was earned by a Chromebox with no serial
port freezing at boot showing nothing at all, and the comments still argued the
losing side of it.
The site:
- a download page. One ISO, what it has actually been run on -- one machine,
under test -- Ventoy and dd, what the first boot looks like step by step,
and the build if you would rather. The support table names one Chromebox
rather than listing hardware, because one Chromebox is the entire bare-metal
record and a list would be fiction.
- Assets/usb.svg, drawn to the same rule as the other marks: two tones,
geometry only, the accent spent in one place, and that place is the activity
light because it is the part that tells you something is happening.
- Download is in both navs and is the hero's primary action; a closing band
ends the front page on it.
- the uberblock-slots and drivers-outside-the-kernel figures are gone. Three
numbers left, including the fastfetch one, which stays because it is funny.
Two things caught by rendering the pages instead of assuming: .hero p was
beating .filemeta on specificity and the file line was coming out at body size,
and the dd command was one line long enough that the card clipped it at `conv=`
-- a destructive command that can scroll half of itself out of view is a good
way to take somebody's disk. It is two lines now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz