docs/plan/ldls.md L3a -- the class bridge, and the first of the three pieces
L3 turned out to be.
/dev/netdev is /dev/pci with the arrows reversed. That hands a device to a
process; this lets a process be one. The kernel side is netdev_ops and nothing
else -- transmit, receive, mac, link_up, the same four entries e1000
publishes -- so a process claims the device, supplies a MAC, and from then on
read() gives it frames the stack wants sent and write() hands it frames that
arrived.
cmd/netecho proves it and is deliberately not a driver: no hardware, none
claimed, every frame answered by the program itself. DHCP so the interface
gets an address at all, ARP so the stack can find it, ICMP so it can be
pinged. All built by hand from RFCs 826, 791, 792 and 2131.
# netecho &
netuser: ldls0 is a process now, 2:4c:44:4c:53:1
netecho: I am 10.9.0.1 and will offer 10.9.0.2
netecho: answered DHCP, offering an address
# cat /proc/netif
interface ldls0 driver netuser address 10.9.0.2 gateway 10.9.0.1
# ping 10.9.0.1 3
netecho: answered an ARP
netecho: answered a ping
3 packets transmitted, 3 received, 0% packet loss
The interface got its address by DHCP from a process and then answered ping
from one. lwIP never learns that the thing behind netdev_ops is not a driver,
which is the whole property the bridge exists to have.
It dies the way it should, too. kill the process and link_up() answers false
immediately, so the stack refuses to send -- "ping: sendto: -5" -- rather than
swallowing packets into a driver that is not there. Start another and the
*same* interface comes back, keeping its address. That came free:
netuser_release_all() sits beside pciuser_release_all() in exit() for exactly
the same reason, and the reason is that a process holding a device is one that
may crash.
One thing the kernel needed: netinit() starts DHCP on the devices that exist
when it runs, so an interface created later -- which is how an LDLS-hosted
driver arrives -- would have come up with no address and no way to get one.
net_attach_late() fixes that, and lives in kernel/net/net.c because that is
the only file allowed to include lwIP's headers.
Recorded as not done, because it is not: this proves the bridge, not a driver.
Nothing in that test loads a module. That is why it was done first -- if ping
had not worked here the bridge would be wrong, and now a failure with a real
driver can only be the driver's side. L3b is the SchOS-side host, L3c is the
fifteen symbols for real, and L3 is the two joined.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md mechanisms 2 and 4: MMIO and DMA to a process.
A process can enumerate the bus, claim a device exclusively, map its BARs and
get memory the device can be pointed at. Proven end to end against an e1000e
-- the exact device class we cannot drive and would want a foreign driver for:
device 7: 8086:10d3 (network)
claimed
BAR0 at 0x81060000, 128 KB
regs[0..3] = 0x00140261 0x00000000 0x00080283 0x00000000
MMIO reaches the device
DMA 8 KB at virtual 0x40001000, physical 0x3f8eb000
Those are the e1000e's CTRL and STATUS with full-duplex and link-up set, which
is how you tell a real mapping from one reading 0xFFFFFFFF off an unmapped
address. Claiming a device the kernel drives is refused -- two writers of one
register set looks like hardware that has started lying -- and everything a
process held is released when it exits, because a driver that crashed must not
keep its hardware away from its replacement.
mmap's offset is the BAR's physical address, checked against the BARs of
devices *this process has claimed*. Without that check the device is /dev/mem
with extra steps and a process could map the kernel's own memory. Mappings are
write-through: a cached write to a doorbell arrives whenever the cache feels
like it, which from a driver's side is indistinguishable from hardware that
ignores you.
The interface is about PCI devices, not about any driver model, and its first
users will be SchOS's own drivers when virtio-gpu is evicted. That ordering is
the design rather than an accident: an interface whose first consumers are
native drivers is a general mechanism something foreign can use later, instead
of a hole shaped like something foreign.
Also: PROT_* and MAP_* moved to include/posix.h. They were defined only in
sys_mem.c, so cmd/fbinfo carried a private copy and this wanted a third --
two copies of a number the kernel compares against, where a mismatch shows up
as a mapping with the wrong permissions rather than an error.
No IOMMU, so this isolates a driver against its own bugs and not against its
own DMA. The plan says so at length and it is still true.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A fresh boot spent 2600 ms in schinit's bootstrap() before printing its first
line, and the whole of it was device nodes. Measured rather than guessed: an
instrumented bootstrap reported 2600 ms on a fresh image and 0 ms on the next
boot, because the nodes already existed by then and mknod failed fast. The cost
was therefore invisible to anyone not building images -- which is to say,
invisible to everyone except whoever works on this.
Each node was a real inode on the root filesystem, and SchFS commits every
mutation as its own transaction group: a copy-on-write rewrite of the path to
the root, then an uberblock behind a cache flush. Twenty of those is seconds.
The duplication mattered more than the time. Major and minor numbers are the
kernel's -- devsw[] in kernel/dev/cdev.c is what they dispatch on -- and schinit
held a second copy of that mapping with nothing checking the two agreed. Adding
a character device meant editing a userspace program, and a wrong minor produced
a node that opened successfully and did nothing.
kernel/fs/devfs.c puts the table next to the thing it describes and serves /dev
behind the same fs_ops vtable procfs uses. The namespace is all it provides:
fileread and filewrite see T_DEV and go through devsw themselves, so a read
never reaches it. It is read-only, and dirlink and ialloc answer EROFS rather
than pretending -- a node exists because the kernel has the device, or it does
not exist.
This also makes /proc/filesystems true. It has advertised "nodev devtmpfs" for
as long as it has existed, against a kernel that had no such filesystem.
Two things found while measuring what remained:
* The thirteen mknod() calls for /proc ran *after* the procfs mount, so every
one was resolving a path into a read-only synthetic filesystem and failing.
procfs.c's own note called them a fallback to be cleaned up later; they have
been dead for longer than that.
* The four mkdir() calls for mount points were the rest of it. They are made
by the image builder now (sysroot-install), and the ones in init are a
fallback -- a mkdir that fails because the directory exists costs a path
walk and no writes, where creating one costs a transaction.
bootstrap() is now 0 ms on a fresh image, down from 2600.
init opens /dev/console after the mount rather than mknod'ing a node called
"console" into the root directory, which is what used to leave a stray /console
in `ls /`. The old path is kept as a fallback: if the mount fails there is no
/dev/console and no way to report it.
socktest passes, /proc still lists per-process directories, ps -e still
enumerates.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz