ACPI, DMI, SMP, xHCI, USB, I2C, NVMe, r8169 and ramdisk progress lines are
kinfo now: in dmesg and on a verbose boot, off the screen of a working
machine. Failures stay cprintf.
vt_repaint also paints the strip right of the last column and below the
last row, which kept the bottom of the X desktop after Ctrl+Alt+F-key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Sixty-five headers sat side by side in include/, so `#include "irq.h"`
said nothing about where irq.h was or what it belonged to, and errno.h,
stat.h and fcntl.h at the top shadowed the system's for any host tool
built with -I./include. They are in folders now -- arch/ core/ fs/
dev/ gfx/ net/ uapi/ (and ldls/ for the Linux driver layer) -- and
every include names the folder, as Linux's do: "core/proc.h".
Done mechanically and checked the hard way: the kernel built from this
tree disassembles identically to the one built from the tree before
it. The full image boots, and userland is the same set of programs.
Paths in docs and comments follow; docs/guides/layout.md has a table
of what is where, and tools/fix-includes.py rewrites old-style
includes from the folders in the tree, for code written before this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Every one of these works under QEMU and stops a real machine:
- MADT processors that are "online capable" but not enabled were
counted as CPUs. AMD firmware lists absent cores that way (so does
QEMU with maxcpus), and startothers() then waited for ever for an
AP that does not exist. Only enabled entries count now, x2APIC
(type 9) entries are read too, and the wait is bounded to a second;
an AP that misses it is parked with INIT and the boot goes on.
- The PIT calibration loop had no bound. Recent boards clock-gate the
8254: the output never rises (a hang) or floats high (TSC "0 MHz"
and every clock thousands of times fast). The loop is bounded and
checked, and falls back to the ACPI PM timer, then CPUID 0x15/0x16.
Under QEMU pit=off the PM timer gives the same figures the PIT did.
- Firmware that hands over in x2APIC mode left lapic[] reading
garbage: cpunum() panicked or the timer never started. Each CPU is
switched back to xAPIC first (x2APIC -> disabled -> xAPIC).
- The IOAPIC was always at 0xFEC00000 and interrupts were aimed at
APIC ID "0". Both now come from the firmware's tables.
- INIT-to-STARTUP was 100 us ("Bochs is slow"); it is the 10 ms the
MP specification asks for.
- mouseinit() drained the 8042 with an unbounded loop. With no
controller the port reads 0xFF and the loop never ends. It now
notices there is no controller and skips the mouse.
Tested in QEMU: i440fx and q35, -smp 4, -smp 2,maxcpus=4, pit=off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HH7xukt4aaiGj1nQEAoQf1
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
