Caps, Num and Scroll Lock now light their LEDs on PS/2 and USB keyboards,
share one state between keyboards, and stop toggling on key repeat. X sets
them through evdev writes while it holds the keyboard.
Unmapping memory in a process with threads on other CPUs now flushes their
TLBs with an IPI. Without it a freed page stayed reachable through stale
translations, which corrupted Epiphany's heap on SMP.
ACPI batteries and AC adapters appear under /sys/class/power_supply.
/proc/<pid>/maps lists file mappings, and a process killed by a fault
names the file and offset it died in. r8169 gets a 256-entry RX ring.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
- Anonymous memory can be reserved without being backed: large mappings,
MAP_NORESERVE and PROT_NONE are recorded and each page appears, zeroed,
on first touch -- from trap() for the program, from uva2ka() for the
kernel on its behalf. WebKit reserves 4 GB at start and touches a sliver;
backing it all failed with ENOMEM and Epiphany aborted.
- r8169: the 8168G generation and later (the laptop's 8168H, XID 541) are
taken from the firmware's out-of-band mode, get their PLL powered, the
receive gate opened, and their PHY reached through the OCP window. The
PHY's power-down bit is cleared; the old code kept it while restarting
autonegotiation. Untested on the hardware so far.
- The network thread follows each device's link into lwIP. The link was
read once at attach, 0.02 s into boot; real autonegotiation takes
seconds, so on hardware the interface stayed down for good.
- Twelve terminals, switched with Ctrl+Alt+F1..F12 by default: the keys X
uses, so the console and the desktop agree. AltGr+F-key is gone from
the defaults (chvt -c altgr+F brings it back).
- SO_PASSCRED on Unix sockets, with SCM_CREDENTIALS delivered by recvmsg.
WebKit sets it on its IPC sockets and aborted when refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
ACPI, DMI, SMP, xHCI, USB, I2C, NVMe, r8169 and ramdisk progress lines are
kinfo now: in dmesg and on a verbose boot, off the screen of a working
machine. Failures stay cprintf.
vt_repaint also paints the strip right of the last column and below the
last row, which kept the bottom of the X desktop after Ctrl+Alt+F-key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Sixty-five headers sat side by side in include/, so `#include "irq.h"`
said nothing about where irq.h was or what it belonged to, and errno.h,
stat.h and fcntl.h at the top shadowed the system's for any host tool
built with -I./include. They are in folders now -- arch/ core/ fs/
dev/ gfx/ net/ uapi/ (and ldls/ for the Linux driver layer) -- and
every include names the folder, as Linux's do: "core/proc.h".
Done mechanically and checked the hard way: the kernel built from this
tree disassembles identically to the one built from the tree before
it. The full image boots, and userland is the same set of programs.
Paths in docs and comments follow; docs/guides/layout.md has a table
of what is where, and tools/fix-includes.py rewrites old-style
includes from the folders in the tree, for code written before this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
PCI drivers took their interrupt from INTERRUPT_LINE. On real hardware
that is the 8259's number, not the IOAPIC pin the device is wired to
(that is in ACPI _PRT, which needs AML), so nothing ever arrived. xHCI
is entirely interrupt-driven, so the USB keyboard and a USB root would
have hung even on a clean boot. Under QEMU the two numbers agree,
which is why it never showed.
- pci_irq_attach()/pci_irq_detach(): MSI, then MSI-X if the driver
allows it, then INTx. The handler is registered before MSI is
enabled, so no edge is lost. xHCI, e1000, r8169 and rtl8139 use it.
- Lines 24-29 are MSI vectors. The LAPIC error vector moves from 19,
which is a PCI pin on Intel chipsets, to 30. Nothing is placed at or
above vector 64 (T_SYSCALL).
- A storming line is masked and its handlers are polled instead of
being left to eat the CPU. A level line that has had a handler for 2 s
and never fired is polled every tick by a kernel thread.
Tested in QEMU q35 with the root on a USB stick: xHCI and e1000e on
MSI; then MSI disabled and INTx deliberately misrouted, where xHCI got
zero interrupts and the root still mounted through the poller. i440fx
INTx and the rtl8139 hand-over are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HH7xukt4aaiGj1nQEAoQf1
The laptop's NIC is an RTL8111H, and the request was to add it to LDLS.
Measuring it is what changed the answer, so the measurement is the commit
message: r8169.ko (6.18.52) has **183 undefined symbols, 130 of them not
implemented by ldls/kpi/, and 35 of those 130 are phylib** --
phy_connect_direct, phy_start, mdiobus_read, genphy_soft_reset and the rest.
phylib is a subsystem with a link state machine, not a set of leaf calls, and
LDLS's usual answer for an unimplemented symbol -- a stub that reports itself
and returns zero -- is exactly wrong for it. phy_start returning zero means the
link never comes up and there is nothing to look at. The 8139too that ldls.md
uses as its model has no phylib dependency, which is why that one was
tractable and this one is not.
So: a native driver. It reaches the PHY through the chip's own MII window --
PHYAR is one register that is a whole MII bus -- and skips the subsystem. Less
work than the port, no GPL entanglement, no firmware blob, no coupling to one
Linux version, and it covers the whole RTL8111/8168 family because all of it
answers to 10EC:8168. The register layout is a fact about the hardware, taken
the way ldls.md section 3 says facts may be taken; the expression is this
tree's, in the same shape as the e1000 beside it.
**It has not run on hardware, and that is not a hedge.** QEMU emulates rtl8139
and nothing else from Realtek, and the 8139 is a different programming model --
a circular receive buffer rather than descriptors -- so it is deliberately not
in the match table. What is verified: it builds, its presence changes nothing
on a machine without the device, and with an rtl8139 on the bus it correctly
leaves it unclaimed. What is not: every register write, on a real part.
The probe therefore says everything a first bug report needs, with cprintf
rather than kinfo so it reaches the screen of a machine with no serial port:
r8169: xid 5c0, 1c:1b:b5:xx:xx:xx, irq 11, link up (bmsr 796d)
xid is the hardware version from the top of TxConfig -- the PCI device id has
been 8168 for twenty years and says nothing. bmsr is MII register 1: bit 2 is
link, bit 5 is autonegotiation complete. Those four facts separate "the chip is
not there" from "the PHY sees nothing" from "the rings are wrong".
Two constants were wrong in the first draft and are recorded because both would
have worked quietly. RxConfig had 0x7700 for "unlimited": MXDMA is bits 8-10
and RXFTH is bits 13-15, so that was one bit short of a full burst and a
half-full FIFO threshold. And CPCR bit 3 was being set under a comment calling
it "PCI multiple read/write" -- bit 3 is PCIDAC, 64-bit addressing, and bit 4
is what the comment described; neither is wanted, so the write is gone.
Both supported configurations: one boot each, no traps, no panics, socktest and
memfdtest green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
