"Ą Ę Ś Ł Ż" drew as "?????" and the obvious diagnosis -- the font has no
glyphs for them -- was wrong twice over. `struct vtcell.ch` was **one byte**
holding a CP437 index, and the console mapped UTF-8 down to it on the way in.
U+0104 does not fit in a byte. No font could have fixed that; the cell had to
get wider first.
So: `ch` is a uint32 codepoint, the mapping on the way in is gone, and the cell
draws through kernel/dev/ttf.c against JetBrains Mono linked into the image.
Cell size comes from the font's measured advance instead of a hardcoded 8x16.
The grid costs 864 KB of BSS instead of 432 KB, which is the honest price of
holding a codepoint per cell for six terminals at 240x75.
The rasteriser needed three fixes before it could be trusted with this.
**21 KB of locals on a 4 KB kernel stack.** `ttf_render` held an outline (512
points as three arrays) and a raster (1024 edges) as automatics. KSTACKSIZE is
4096. They walked off the bottom of the stack into whatever was underneath,
which surfaced as user processes faulting on addresses they never touched and
then a panic inside freevm() on an overwritten page directory. Nothing pointed
anywhere near a font.
**And then again, recursively.** load_outline() held a 4736-byte outline as a
local *and recursed* for composite glyphs. Composite glyphs are exactly Ą, Ę,
Ś, Ł, Ż -- so the second crash arrived the moment the first fix let Unicode
reach the screen, looking like a fresh bug. Now a static outline per recursion
level with a depth cap of 4 (the font's deepest real nesting is 2), and the
leaf parse split into load_simple() so its 512-byte flag array is not
multiplied by the depth. Worst chain measured from the object file: ~2.3 KB.
Neither showed in tools/ttftest, which has an 8 MB stack. That is the standing
hazard of one source file built for host and kernel: the host is most forgiving
about exactly the resource the kernel is strictest about.
**Component transforms were being skipped**, on the stated theory that a wrong
transform is worse than none. It is not. `‘` in this font is the comma glyph
with a scale of -1 -- a 180-degree rotation -- and the offset that ships with
it only lands correctly after the rotation. Without it the mark went twelve
pixels into a ten-pixel cell and was clipped away entirely, so the character
read as missing from the font rather than as misplaced. F2Dot14 2x2 now, with
SCALED_COMPONENT_OFFSET honoured.
The glyph cache was ASCII-only, so every accented letter re-rasterised on every
repaint: a screenful of Polish did hundreds of bezier flattenings per scroll
where the same screenful of English did none. 95 reserved ASCII slots plus 224
shared slots keyed by codepoint, 64 KB pool. Verified 13680 cached renders
byte-identical to direct ones across collisions and a pool flush.
tools/ttftest speaks UTF-8 now. Iterating bytes meant it could only ever ask
for ASCII, and ASCII is entirely simple glyphs -- it could not reach the code
path that mattered.
Also: resolvconf's success line moves behind /proc/bootmode, same rule as
vgpud. A quiet boot opened with "resolvconf: nameserver 10.0.2.3" where the
one line was supposed to be "Welcome to SchOS!". Failures stay loud.
Verified on screen, not just on the host: Ą Ę Ś Ł Ż ć ń ó ź, Ω λ π Œ Ð Æ ß,
∞ ‘x’ → ≤ all render, panic=0 across four boots.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three symptoms, two causes, both in the terminal layer.
**The grid and TIOCGWINSZ disagreed about the size.** vt_init() sizes every
grid from gfx_cols()/gfx_rows(), and it runs at main.c:75 -- while the display
driver attaches its scanout from the PCI bus walk at main.c:99. So the grids
were the 80x24 fallback, and TIOCGWINSZ, which computed its own answer live,
said 160x50.
That one disagreement produced all three things visible in the report: text
stopped two thirds of the way down the screen, `ls` laid out 160 columns into
an 80-column grid so words split across the wrap ("vers" / "ion"), and zsh's
cursor tracking was wrong on every line.
Fixed in two places, because either alone would leave the trap set:
gfx_attach_scanout() now calls vt_resize(), so the grids learn the real screen
the moment there is one; and TIOCGWINSZ reports v->cols/v->rows rather than
measuring again. One number, from the terminal being asked.
**Wrapping was eager.** A glyph printed in the last column moved the cursor to
the next line immediately. Real terminals set a pending-wrap flag and wrap when
the *next* glyph arrives -- which is why a line exactly as wide as the screen
takes one row and not two, and why a program can write the bottom-right cell
without scrolling.
zsh's partial-line marker depends on that rule directly: it writes exactly
COLUMNS-1 spaces and expects to still be on the line. With eager wrap it left a
reverse-video '#' above every prompt, which is the hashtag in the report. Both
are gone.
Verified by screendump: `ls /proc` now fits one line with "version" intact, no
markers, and output fills the screen to the last row. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Same disease as the network stack, one subsystem over. kernel/dev/vga.c
was three things wearing one name: the owner of the framebuffer, a
bitmap drawing library, and the text console. Only the first is a
driver, and because they shared a file they shared a prefix -- so
panic.c drew the crash screen with vga_fill_rect, console.c printed with
vga_putc, /dev/fb0 handed out vga_fb_phys, and every one of those files
named a display driver it had no business knowing about.
Split three ways:
- kernel/drivers/gpu/vga/vga_fb.c owns the VBE framebuffer -- the mode
the loader programmed and handed over, the aperture, and the display
class vtable. It is a driver and now lives with the driver that
finds the card on the bus.
- kernel/dev/gfx.c draws: pixels, shapes, glyphs, the cursor, scroll,
the ANSI erase operations. It names no driver. The framebuffer
arrives through gfx_attach_scanout(), so a driver publishes what it
owns and this file draws on it without knowing what it is.
- include/gfx.h is the interface, and says why it is deliberately not
the display class: that one is about frames -- acquire, present,
vblank -- and the crash screen has to work when nothing else does.
main() no longer calls a display driver. platform_register_devices()
takes the framebuffer address and brings up whatever owns it, which is
where driver names belong; kernel/drivers/registry.c is the file whose
entire job is naming every driver in the kernel.
virtio-gpu got the e1000 treatment as well: instances in an array, the
instance hung on dev->priv by an `attached` hook, and every op reading
it rather than a file-static. It refused the second adapter outright
before, which is not hypothetical -- integrated plus discrete is an
ordinary laptop. The VGA driver deliberately has no such hook, and says
so: there is one framebuffer the loader programmed however many
VGA-class controllers the bus turns up, and a second one publishing the
same scanout is the truth rather than a bug.
Private headers moved next to their drivers: include/virtio.h and
include/xhci.h each had exactly one includer. include/ is for headers
the rest of the kernel needs.
Deleted rather than moved: consoleinit() programmed the sixteen ANSI
colours into the VGA DAC and disabled text-mode blink, by writing ports
0x3C0-0x3C9 from the console. The comment three lines above the colour
table already said this does nothing in a 32bpp linear mode -- there is
no palette to index -- so it was both dead and in the wrong file.
Verified, and this is a refactor so the evidence is that nothing moved:
- bootcheck -Fb -Net: 59 [ok], no failures. That covers the console
through every command, /dev/fb0's geometry, writing pixels through
write() and mapping the framebuffer through mmap.
- make crashshot: the crash screen renders exactly as before --
shapes, glyphs, logo and QR code -- which is the whole of gfx.c
exercised at once, in a panic, with the scanout attached by a driver.
- make schcom-test: five pixel assertions from the host oracle still
pass, so the display class and the compositor above it are unmoved.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Nexoniarz