1449 lines of boot/bios/, tools/sign.pl and tools/padstage2.pl, plus the
build rules, the disk image and the ISO entry that existed to carry them.
Everything since roughly 2012 boots UEFI, and CSM -- the firmware-side
BIOS emulation that lets a legacy loader run on such a machine at all --
has been going away since Intel dropped support for it in 2020. So this
is not a path being retired early; it is one whose remaining hardware is
already the exception.
The cost was never the code, it was the tax on everything near it. Stage
2 had a 65-sector ceiling it overflowed silently -- 25440 bytes against
24576 -- and because the kernel is written at sector 1 + STAGE2_SECTORS,
an overflowing loader was overwritten by the very kernel it was loading.
The resolution list could not be shared with UEFI either: VBE mode
setting is INT 10h, so matching it needed unreal mode, which is the
riskiest code in the tree for a feature that already worked elsewhere.
What replaces schos.img is the staged ESP, handed to QEMU as a virtual
FAT volume. That is a development arrangement and not an installable
disk; a real GPT image with a real FAT partition is the installer's job,
and until it exists nothing here writes a disk a machine boots unaided.
Secure Boot is untouched too -- the loader is unsigned.
The ISO keeps one El Torito entry, the FAT image holding loader and
kernel. It never booted from a USB stick via BIOS anyway: the firmware
presents the stick as a hard disk while stage2main.c read the kernel back
over ATAPI.
The 32-bit multiboot entry in entry.S now has no caller and is left in
place. Deleting kernel entry code is its own change with its own way of
failing silently, and it should not ride along with this one.
Ported with it: run.ps1, the six screenshot tools, and schcom_test.sh,
each with its own OVMF varstore copy so no run inherits another's UEFI
variables.
Two things this shook out. OVMF now belongs in `all`: nothing boots
without firmware, `make clean` wipes build/ including the copy fetched
from the host, and a clean followed by a build left every run script
throwing. And it cannot be listed as a prerequisite at the top of the
file -- make expands prerequisites when it reads the line, and
$(OVMF_CODE) is defined further down, so naming it there appends nothing
and says nothing.
Verified from a clean tree: 110 [ok] and no failures on the full suite,
the ISO boots with no hard disk attached, schfs-check passes, schcom's
end-to-end pixel test passes, and fbshot captures a real 1280x800 frame.
Two bugs reported from actual use, plus a test harness that had stopped
testing.
init could be killed by Ctrl-C, taking the machine with it. SIGINT goes
to the foreground process group, init is pgid 1, and any window where
tty_fg_pgrp is 1 -- before a shell claims the terminal, after one exits,
or between the two while the key is held -- lands it on init. init has
no handler, so killed was set, exit() ran, and exit() panics outright on
initproc. Spamming Ctrl-C at a frozen program is exactly the input that
finds that window. POSIX and Linux both discard a default-action signal
for pid 1; init_ignores() now does the same, SIGKILL included, because
init is not killable from userspace on any Unix.
Everything was slow because BSIZE was 1024 while a SchFS block is 4096,
so every block cost four IDE requests, each with its own interrupt and
sleep/wakeup. exec() of the 800 KB toybox binary meant ~800 round trips.
The giveaway: `seq 1 200`, which touches no file and prints nothing,
cost the same 2.0s as `cat /bin/toybox`, and `ls | wc -l` cost exactly
double -- both dominated by loading the same binary twice.
BSIZE is 4096 now, one request per SchFS block, and NBUF is 256 blocks
(1 MB) rather than 90 KB -- smaller than the binary every command execs,
so nothing was ever still resident. ideinit() issues SET MULTIPLE MODE,
which is what makes a 4096-byte transfer legal: READ/WRITE MULTIPLE move
the drive's multiple count per interrupt and nothing had ever set it,
which is the real reason idestart() carried a sector_per_block > 7 panic.
seq 1 200 2.02s -> 0.06s
ls /bin 2.76s -> 0.68s
ls /bin | wc -l 4.68s -> 0.73s
And the harness. bootcheck called Find-Qemu from a param() default,
which is bound before any function in the body exists -- so it died on
its first line and printed an error containing neither "FAIL" nor
"Exception", the two things being grepped for. It had not run since it
was made host-portable. Worse, an earlier index-based edit had deleted
the Expect blocks for -Tty, -Usb, -Sock, -Ps and -Evdev, so five of the
seven modes asserted nothing at all. Restored, and the USB run gets its
own 16 MB build/usbstick.img: it had been pointed at build/fs.img, which
nothing builds since SchFS became root, so QEMU refused to start.
242 checks across seven modes, all passing, and make schfs-check green.
tools/windows/ .ps1 (pwsh, so usable from Linux and macOS too)
tools/posix/ .sh
tools/python/ .py
tools/ .c and .pl
The .c and .pl files stay at the top level because they are not
host-specific: the build compiles or invokes them on every platform.
Call sites updated in the Makefile, ports/mk/port.mk, docs and the
project memory. The one thing that does not survive a move on its own is
a script deriving the repo root from its own location -- all nine
PowerShell tools used Split-Path $PSScriptRoot -Parent, and memory-sync.sh
used dirname/.., both of which quietly become tools/ one level deeper.
Two levels now.
Two pre-existing Windows failures surfaced while verifying, both real and
neither caused by the move:
- schfs_fsck.c did not compile under mingw at all: --extract uses
POSIX mkdir(path,mode), symlink() and link(), none of which mingw
has. That took the whole tool with it, and `make schfs-check` with
it. mkdir maps to _mkdir; symlink and link fail loudly rather than
writing a regular file in their place, because an extracted tree
that differs from the image while reporting success defeats the
point of --extract.
- the round-trip test then failed at `ln -s`, since Git Bash cannot
create symlinks without developer mode. It skips with a message now.
Not a fudge: mkschfs's mingw build cannot see a symlink either, so
the test would have compared a tree with none against an image with
none and called it a pass -- coverage reporting itself as present
while being absent.
Verified on Windows: build clean, all seven bootcheck suites green,
make schfs-check passes.
