Sixty-five headers sat side by side in include/, so `#include "irq.h"`
said nothing about where irq.h was or what it belonged to, and errno.h,
stat.h and fcntl.h at the top shadowed the system's for any host tool
built with -I./include. They are in folders now -- arch/ core/ fs/
dev/ gfx/ net/ uapi/ (and ldls/ for the Linux driver layer) -- and
every include names the folder, as Linux's do: "core/proc.h".
Done mechanically and checked the hard way: the kernel built from this
tree disassembles identically to the one built from the tree before
it. The full image boots, and userland is the same set of programs.
Paths in docs and comments follow; docs/guides/layout.md has a table
of what is where, and tools/fix-includes.py rewrites old-style
includes from the folders in the tree, for code written before this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
From the first boot on real hardware: a Razer mouse's control transfer
failed with a babble, and an ITE controller's late endpoint-0 completion
was reported as an "unexpected event" during a command.
A failed control transfer left endpoint 0 halted (or, on a timeout, still
running with TRBs queued), so every request after it to that device failed
too. It is now reset or stopped and its dequeue pointer moved past what was
left on the ring. A STALL -- a device declining a request it does not
implement -- is logged only on a verbose boot.
HID interfaces without the boot subclass were turned away unless they had a
pointer. The report descriptor's keyboard page is now read too -- modifier
bits, a key array, an NKRO bitmap -- and each report rewritten into the boot
layout for the existing path. Checked with QEMU's usb-kbd forced into report
protocol: "echo Hi", Shift included, typed and ran.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Devices can now arrive and leave after boot. A "usbhotplug" kernel thread
handles root-port changes, which it is told about by Port Status Change
events and also checks for every quarter second. It also handles changes
behind hubs, which each hub reports on its status-change endpoint. An
unplugged device has its endpoints closed and any transfer in flight
failed. Then its drivers' disconnect hooks run, the slot is disabled and
its memory is freed. Everything behind a hub that goes goes with it. This
needed the interrupt handler to file command and endpoint-0 completions
for their waiters, so that enumeration can run while keyboards interrupt.
On real hardware: the controller is taken from the firmware through USB
Legacy Support before reset, with SMIs off. On Intel 7/8/9 series parts
the ports are switched over from EHCI, which is where firmware leaves
them.
Every interface of a device is offered to the class drivers, not just
the first, so a receiver's mouse on interface 1 gets a driver. Configure
Endpoint now copies the slot context from the controller. Before, it
rebuilt it and lost the route string and TT fields of devices behind
hubs.
HID: pointers are read in report protocol from their report descriptor.
That covers buttons, X/Y and wheel, relative or absolute, and report IDs.
Boot protocol is kept as the fallback for mice and for keyboards.
Non-pointer HID interfaces are declined rather than treated as tablets.
USB keyboards get software key repeat. Mass storage handles up to four
sticks, each unregistered from the block layer when it is pulled out,
along with its cached blocks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HH7xukt4aaiGj1nQEAoQf1
PCI drivers took their interrupt from INTERRUPT_LINE. On real hardware
that is the 8259's number, not the IOAPIC pin the device is wired to
(that is in ACPI _PRT, which needs AML), so nothing ever arrived. xHCI
is entirely interrupt-driven, so the USB keyboard and a USB root would
have hung even on a clean boot. Under QEMU the two numbers agree,
which is why it never showed.
- pci_irq_attach()/pci_irq_detach(): MSI, then MSI-X if the driver
allows it, then INTx. The handler is registered before MSI is
enabled, so no edge is lost. xHCI, e1000, r8169 and rtl8139 use it.
- Lines 24-29 are MSI vectors. The LAPIC error vector moves from 19,
which is a PCI pin on Intel chipsets, to 30. Nothing is placed at or
above vector 64 (T_SYSCALL).
- A storming line is masked and its handlers are polled instead of
being left to eat the CPU. A level line that has had a handler for 2 s
and never fired is polled every tick by a kernel thread.
Tested in QEMU q35 with the root on a USB stick: xHCI and e1000e on
MSI; then MSI disabled and INTx deliberately misrouted, where xHCI got
zero interrupts and the root still mounted through the poller. i440fx
INTx and the rtl8139 hand-over are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HH7xukt4aaiGj1nQEAoQf1
Nexoniarz is the sole author and SchOS was never published under
Apache-2.0, so this is a straight relicence. LICENSE is the FSF GPLv2 text,
every first-party SPDX header moves to GPL-2.0-or-later, and NOTICE,
README.md, docs/licensing.md and the site say so. projects/schfs-linux
follows the rest of the tree.
The GPL gives copyleft: a fork has to ship its source. It also lifts the
old "Linux drivers, never" rule, since GPL-2.0-only code combines with
GPL-2.0-or-later. "Or later" leaves room for GPLv3, but one binary still
has to pick one version, so docs/licensing.md now keeps Apache-2.0 and
GPLv3 code out of the kernel to keep Linux code possible there. BSD
4-clause code goes from "avoid" to "no", because the advertising clause
is GPL-incompatible.
LDLS still ships no .ko. That boundary is now project policy rather than
a legal requirement, and ldls.md, devices.md and licensing.md section 6
say so. refmod declares license=GPL, and ldls-check passes (27 checks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Same disease as the network stack, one subsystem over. kernel/dev/vga.c
was three things wearing one name: the owner of the framebuffer, a
bitmap drawing library, and the text console. Only the first is a
driver, and because they shared a file they shared a prefix -- so
panic.c drew the crash screen with vga_fill_rect, console.c printed with
vga_putc, /dev/fb0 handed out vga_fb_phys, and every one of those files
named a display driver it had no business knowing about.
Split three ways:
- kernel/drivers/gpu/vga/vga_fb.c owns the VBE framebuffer -- the mode
the loader programmed and handed over, the aperture, and the display
class vtable. It is a driver and now lives with the driver that
finds the card on the bus.
- kernel/dev/gfx.c draws: pixels, shapes, glyphs, the cursor, scroll,
the ANSI erase operations. It names no driver. The framebuffer
arrives through gfx_attach_scanout(), so a driver publishes what it
owns and this file draws on it without knowing what it is.
- include/gfx.h is the interface, and says why it is deliberately not
the display class: that one is about frames -- acquire, present,
vblank -- and the crash screen has to work when nothing else does.
main() no longer calls a display driver. platform_register_devices()
takes the framebuffer address and brings up whatever owns it, which is
where driver names belong; kernel/drivers/registry.c is the file whose
entire job is naming every driver in the kernel.
virtio-gpu got the e1000 treatment as well: instances in an array, the
instance hung on dev->priv by an `attached` hook, and every op reading
it rather than a file-static. It refused the second adapter outright
before, which is not hypothetical -- integrated plus discrete is an
ordinary laptop. The VGA driver deliberately has no such hook, and says
so: there is one framebuffer the loader programmed however many
VGA-class controllers the bus turns up, and a second one publishing the
same scanout is the truth rather than a bug.
Private headers moved next to their drivers: include/virtio.h and
include/xhci.h each had exactly one includer. include/ is for headers
the rest of the kernel needs.
Deleted rather than moved: consoleinit() programmed the sixteen ANSI
colours into the VGA DAC and disabled text-mode blink, by writing ports
0x3C0-0x3C9 from the console. The comment three lines above the colour
table already said this does nothing in a 32bpp linear mode -- there is
no palette to index -- so it was both dead and in the wrong file.
Verified, and this is a refactor so the evidence is that nothing moved:
- bootcheck -Fb -Net: 59 [ok], no failures. That covers the console
through every command, /dev/fb0's geometry, writing pixels through
write() and mapping the framebuffer through mmap.
- make crashshot: the crash screen renders exactly as before --
shapes, glyphs, logo and QR code -- which is the whole of gfx.c
exercised at once, in a panic, with the scanout attached by a driver.
- make schcom-test: five pixel assertions from the host oracle still
pass, so the display class and the compositor above it are unmoved.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Every driver reached its registers with P2V(bar.base), which assumes the
BAR sits inside the 0-4 GB the direct map covers. Under SeaBIOS it always
does. Under OVMF it does not: firmware may place a 64-bit BAR anywhere,
and it puts virtio-gpu's at about 768 GB. P2V produced an address with no
translation behind it, so the driver's first register write took a page
fault, then a double fault, then a triple fault and a reboot loop --
which, coming from a driver bind, reads as broken hardware rather than a
missing mapping.
ioremap() carries each region on a 1 GB page in PDPT entries 4-511, which
were unused: the direct map occupies 0-3, and kpml4[0], kpml4[KERNBASE]
and every process's PML4 all share that one table, so a mapping appears
in every address space at once with no page table to allocate. The pages
are cache-disabled and write-through for the same reason the top GB of
the direct map is -- these are registers, and a write sitting in a cache
line is a write the device never sees.
A physical address below 4 GB returns the direct-map address unchanged,
so the BIOS path, where every BAR is low, is byte for byte what it was.
virtio-gpu now initialises under OVMF (1280x800, queue 64) instead of
triple faulting. e1000 and xhci had the identical latent bug; xhci was
already refusing to bind above 4 GB with a comment saying the mapping did
not exist yet, and now it does.
BIOS unchanged: bootcheck 108 [ok] with -Fb -Tty -Usb -Sock -Evdev -Ps,
e1000 and xhci both binding.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
