Records the direction set out today -- snapshots, scrub, compression and
encryption for SchFS; one shared home for the format; a unified second
stage under both firmwares; audio -- and the two requests that were
pushed back on, with the reasoning, so neither gets re-litigated from
scratch: 128-bit addressing buys nothing over the 64 ZB already
addressable, and SchFS cannot live in projects/ because the kernel has to
mount it to boot.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Records that the GUI stack moved ahead of the installer, that Schcom v0
runs and how to prove it, the decisions behind the protocol shape
(Wayland-shaped, MIT so linkable, shm id rather than SCM_RIGHTS for now),
and the one-display-device trap in the screendump test.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`make ramroot` wiped the objects on the way in, and nothing wiped on the
way out. So a plain `make` afterwards kept every RAMDISK_ROOT object and
linked the 24 MB ramdisk back into a kernel that no longer used it: 25 MB
where a clean build is 836 KB. It still booted -- from the ramdisk -- and
the only outward symptom was stage2 having thirty times as much to load
through PIO, one sector at a time. That is the "booting got slower"
report this came from.
A stamp file records which setting the objects were built with, and the
tree is dropped when it changes in either direction.
qemu-kvm is opt-in and the default stays TCG, because the suite's timings
were established there. Measured with the guest timing itself,
`ls /bin | wc -l` goes 2.9s -> 1.1s. Boot does not improve and gets
slightly worse: every PIO port access in stage2 is a VM exit under KVM.
Retracts a claim from earlier today. The "2.2x speedup" attributed to the
region-based allocator was a measurement artifact -- the probe sent a
command, slept a fixed 50s on the host, then read /proc/uptime, so it
timed the sleep rather than the command, through a guest clock that drifts
under load. Bracketing the command inside one guest command line shows no
measurable difference. The e820 change is still correct; it is simply not
a performance change.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Records that a mountable ISO 9660 root was called off -- the ISO already
boots a complete system from the ramdisk, so it is the live environment
and an installer makes a mountable disc redundant, which drops the ATAPI
driver and ISO 9660 filesystem entirely.
Also records the installer's shape (both firmwares from the start, .sip
before anything installs), the five-stage dependency chain, and the 4 GB
limit the raw block device carries.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Records the four bugs between "boots to cpu0: starting" and "boots to an
interactive shell", the new ioremap rule for device registers, and what
the disc now contains -- including that it is still not a live CD, and
what that would take.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three bugs, all of which surfaced as a failed check somewhere other than
the command that was actually slow.
Wait-Prompt waited a fixed 20 s. These tests run under TCG, not KVM, and
a cold `ls /bin | wc -l` takes 23 s on the Fedora laptop measured with
the guest's own /proc/uptime -- it was over the wall every time. Raised
to 60 s; a long timeout only costs time when something is genuinely
wrong, a short one costs a false failure elsewhere.
It also matched a prompt anywhere in the transcript. Between writing a
command and the guest echoing it the log still ends with the previous
prompt, so it could return before the command had started and the next
one was typed on top of it. Anchor the match to text produced after the
command was sent.
On timeout it slept two seconds and typed regardless, which is what
turned one slow command into an interleaved transcript and a failure
attributed to a later check. Wait for output to stop arriving instead.
Report any command that never produced a prompt next to the result:
after one overrun every later check is reading a transcript that may be
interleaved, and that should not be something you have to notice in the
scrollback.
With this, -Fb -Tty -Usb -Sock -Evdev -Ps is 108 [ok], 0 misses.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Records the measured effect of the region-based allocator (2.2x on a cold
ls, 6 s off the boot), the two pre-existing UEFI blockers found while
verifying it, and the three confounds that each produced a confident
wrong answer about guest speed in one session.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Neither is Fedora-specific. A different host and a freshly built
userland simply drove code that Windows never reached.
tools/mkfs.c did not compile at all. The DT_UNKNOWN/DT_DIR/DT_REG
fallbacks sat above <dirent.h>, so on glibc -- which spells them as
enumerators -- the #ifndef asked before the header was read, always
answered "missing", and then the header's own enum expanded to
`enum { 0 = 0, ... }`. Move the fallbacks below the include. The
include cannot move up instead: it has to follow the #undef that ends
the `#define dirent schfs_dirent` block.
getstackpcs() page-faulted. It dereferenced rbp[1] without validating
rbp, and the guard rejected 0xffffffff -- dead code on x86-64, already
caught by the KERNBASE test -- while the value that actually turns up
is all-ones, which is above KERNBASE. rbp[1] then wrapped to 0x7 and
took trap 14. `cp` panicked the kernel every time. Bound rbp from
above and require 8-byte alignment.
That second one masks other bugs: getcallerpcs() runs on every lock
acquisition and again from the trap handler, so a walker that can
fault replaces a real diagnosis with a bogus one.
Baseline on the Fedora laptop is now green: make ports, make,
make schfs-check including the round-trip that had never run, and
bootcheck at 27/27 plus 108 [ok] across the extended suites.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
README's layout predated the BIOS/UEFI split. moving-to-linux.md now
says what is gitignored and therefore absent from a clone: dist/ holds
61 MB of upstream tarballs, so copy it or let the build re-fetch them --
make ports verifies each against a known SHA-256 either way.
Milestone 1 of three: manifests, RunAtLoad, KeepAlive with throttling,
and reaping. Replaces the hardcoded fork-a-shell loop in cmd/init, which
stays in the tree for now.
Jobs are sectioned key=value files in /etc/schinit/*.job, kept in the
repo under etc/ and installed into the sysroot -- sysroot/ is generated
and gitignored, so anything written only there is lost on a fresh clone,
which is already true of /etc/passwd and should not become true of the
boot configuration. Unknown keys and sections are ignored rather than
fatal: a manifest written for a newer schinit must not stop this one
booting the machine.
Socket sections are parsed and recorded but not yet held. That is
milestone 2 and it is the whole reason for copying launchd rather than
sysvinit -- the supervisor holds the listener and starts the job on first
connect, which inverts the dependency graph and makes runlevels a
non-concept. The key exists now so manifests need not change later.
getdents64 is exposed to userland for this. The kernel has had it since
the Linux ABI landed, but nothing declared it in user.h or lib/usys.S, so
first-party programs had no way to list a directory at all.
Two things found by testing rather than reasoning:
- setsid() gives a job its own session, and a session has no
controlling terminal. The console then delivers input only to the
foreground process group it tracks, so the shell came up, echoed
every keystroke through the line discipline, and executed none of
them -- indistinguishable from a hung shell. ControllingTerminal=yes
claims it with TIOCSCTTY/TIOCSPGRP; off by default, since a daemon
has no business seizing the console.
- the first bootstrap() dropped /dev/input/event0-1 and most of /proc,
because it was transcribed from the part of the old init that had
been read rather than all of it. -Evdev caught it.
build/usbstick.img is built by `all` now: without it QEMU refuses the
-drive and the entire -Usb run produces no output, which reads as a
broken USB driver.
Seven suites green: base 27, Tty 51, Ps 32, Sock 64, Fb 36, Usb 31,
Evdev 29. make schfs-check passes.
boot/bios/ now holds the MBR, the El Torito stub and the real-mode stage
2; boot/uefi/ is empty and documented.
Separate directories rather than #ifdefs, because the two share almost
nothing. A BIOS loader lives in 16-bit real mode, reaches the firmware
through software interrupts, and walks itself up into long mode. A UEFI
loader is a 64-bit PE that the firmware has already placed in long mode
with paging on, calling services through a table of function pointers.
What they do share is the hand-off contract, which boot/README.md now
writes down: ELF segments placed, long mode, a 24-byte-entry memory map
at E820_MAP_ADDR, framebuffer geometry at VBE_INFO_ADDR.
That contract is the point of documenting it now. UEFI's GetMemoryMap
returns EFI_MEMORY_DESCRIPTORs, and the right move is to translate them
into the entries kernel/arch/x86_64/e820.c already parses rather than
teach the kernel a second format.
Build output paths under $(BUILD)/boot are unchanged; only sources moved.
run.ps1 is a .ps1 that does not live under tools/, so every sweep that
fixed the other launchers went straight past it:
- hdb defaulted to build/fs.img, which nothing builds since SchFS
became the root, so it pointed at a file that does not exist. QEMU
came up with no usable disk on device 1 and the kernel panicked with
SCHFS_ROOT -- "no SchFS volume on the root device". That is exactly
the failure this script exists to prevent.
- a -SchFS switch built around the old arrangement, where SchFS was a
secondary volume and needed `make ramroot` to free device 1. There
is no such arrangement now; every boot is a SchFS boot.
- `cd /d/DEV/SchOS` hardcoded into the build invocation. It survived
the Schunix -> SchOS rename by luck and would break on any clone.
Derived from $PSScriptRoot now.
- a hardcoded scoop QEMU path, and build\ backslash literals.
- only -vga std, where the Makefile also attaches virtio-gpu-pci.
The magic check is SchFS-only now and prints the bytes it actually read
when it fails.
SchFS itself is fine: it mounts on 1, 2 and 4 CPUs, and all seven
bootcheck suites pass.
Claude Code keeps per-project memory at <home>/.claude/projects/<key>/,
where <key> is the project's absolute path with every separator and the
drive colon turned into a dash. That makes it both rename-fragile and
machine-specific, and this project has hit each of those once:
- D:\DEV\Schunix -> D:\DEV\SchOS changed the key, and 43 memories were
invisible until moved across by hand.
- Development happens from Windows and from Linux, and each looks in a
different place for the same checkout.
Committing .claude/memory/ fixes both -- git carries it across renames
and between hosts -- and `import` puts it wherever the local machine
expects. .claude/settings.local.json stays ignored: those are per-machine
permissions.
The colon maps to a dash rather than being dropped. Deleting it gives
D-DEV-SchOS, which matches nothing and silently finds zero memories; that
was the first attempt. On Git Bash the key comes from `cygpath -w`,
because Claude Code is a Windows program and sees D:\DEV\SchOS, not
/d/DEV/SchOS.
