Everything the kernel printed went to the serial port and nowhere else until
the first program started and called console_takeover(). On a machine with a
UART that is fine. On one without -- a laptop, a Chromebox, anything built
this century -- the screen showed the loader's progress bar and then nothing
at all, for the whole of boot, on exactly the machines where something was
going wrong.
A report of "it shows Loading SchOS and freezes" cannot be acted on. The same
boot with a log on it says which line it stopped after, and that is usually
the whole diagnosis.
The loader has already put a framebuffer on the screen and described it in the
boot block, so there was a perfectly good console sitting unused for the
entire early boot. kmain attaches it on its first line now.
Not gated on the F8 verbose menu, which was the first instinct and is wrong:
F8 is no use to someone whose machine resets before they can read anything.
This is what Linux does too -- the log is the default and `quiet splash` is
the thing you ask for. The splash survives until the kernel's first message,
and a boot that succeeds clears the lot when the shell starts, so the only
people who ever see this are the people who need to.
vt_init is idempotent now, because the early attach brings the terminals up
before main() reaches its usual call and the second one must not wipe six
screens of boot messages.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Same disease as the network stack, one subsystem over. kernel/dev/vga.c
was three things wearing one name: the owner of the framebuffer, a
bitmap drawing library, and the text console. Only the first is a
driver, and because they shared a file they shared a prefix -- so
panic.c drew the crash screen with vga_fill_rect, console.c printed with
vga_putc, /dev/fb0 handed out vga_fb_phys, and every one of those files
named a display driver it had no business knowing about.
Split three ways:
- kernel/drivers/gpu/vga/vga_fb.c owns the VBE framebuffer -- the mode
the loader programmed and handed over, the aperture, and the display
class vtable. It is a driver and now lives with the driver that
finds the card on the bus.
- kernel/dev/gfx.c draws: pixels, shapes, glyphs, the cursor, scroll,
the ANSI erase operations. It names no driver. The framebuffer
arrives through gfx_attach_scanout(), so a driver publishes what it
owns and this file draws on it without knowing what it is.
- include/gfx.h is the interface, and says why it is deliberately not
the display class: that one is about frames -- acquire, present,
vblank -- and the crash screen has to work when nothing else does.
main() no longer calls a display driver. platform_register_devices()
takes the framebuffer address and brings up whatever owns it, which is
where driver names belong; kernel/drivers/registry.c is the file whose
entire job is naming every driver in the kernel.
virtio-gpu got the e1000 treatment as well: instances in an array, the
instance hung on dev->priv by an `attached` hook, and every op reading
it rather than a file-static. It refused the second adapter outright
before, which is not hypothetical -- integrated plus discrete is an
ordinary laptop. The VGA driver deliberately has no such hook, and says
so: there is one framebuffer the loader programmed however many
VGA-class controllers the bus turns up, and a second one publishing the
same scanout is the truth rather than a bug.
Private headers moved next to their drivers: include/virtio.h and
include/xhci.h each had exactly one includer. include/ is for headers
the rest of the kernel needs.
Deleted rather than moved: consoleinit() programmed the sixteen ANSI
colours into the VGA DAC and disabled text-mode blink, by writing ports
0x3C0-0x3C9 from the console. The comment three lines above the colour
table already said this does nothing in a 32bpp linear mode -- there is
no palette to index -- so it was both dead and in the wrong file.
Verified, and this is a refactor so the evidence is that nothing moved:
- bootcheck -Fb -Net: 59 [ok], no failures. That covers the console
through every command, /dev/fb0's geometry, writing pixels through
write() and mapping the framebuffer through mmap.
- make crashshot: the crash screen renders exactly as before --
shapes, glyphs, logo and QR code -- which is the whole of gfx.c
exercised at once, in a panic, with the scanout attached by a driver.
- make schcom-test: five pixel assertions from the host oracle still
pass, so the display class and the compositor above it are unmoved.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
lwIP 2.2.0, fetched by ports/lwip and compiled straight into the kernel.
Not written from scratch, and the reason is not the packet formats: it is
congestion control, retransmission, window management and twenty years of
corner cases that only show up against a real peer. Not FreeBSD's
netinet either, though the licence would have allowed it -- that stack is
not a library, it reaches into mbufs, epoch(9), netisr, VNET and uma(9),
so adopting it means porting FreeBSD's kernel infrastructure first. lwIP
was written for exactly this situation: a small kernel with a raw
Ethernet driver and a port layer of a few hundred lines.
It is kernel code, so nothing is installed into the sysroot and there is
no second build system: the top-level Makefile compiles the files it
wants against our port headers. The file list is explicit rather than a
wildcard, because lwIP ships IPv6, 6LoWPAN, PPP, SLIP, DNS-SD and a dozen
apps in the same tree, and building what is not configured yields either
dead code or a link error naming a port function nobody meant to write.
Its sources are unmodified and its warnings are silenced for its files
only -- patching them would mean maintaining a fork.
The port layer is ours: a lock, a clock, the netif that hands frames to
e1000, lwipopts.h, and a shim/ directory of tiny headers so lwIP's
<string.h> and friends resolve to the kernel's functions instead of the
host's, whose prototypes disagree and would otherwise be found on the
default include path.
NO_SYS=1, so lwIP has no threads of its own and one kernel thread feeds
it. A thread rather than the interrupt handler, because a call into lwIP
can reach the driver, the driver can sleep, and an interrupt handler
cannot -- so the interrupt still only clears the cause register and the
thread polls. kthread_create is new and generally useful: a process with
a kernel-only page directory, no files, no cwd, no parent, dispatched
from forkret, which can therefore sleep and be preempted like anything
else. DHCP obtains an address at boot and the console says which one.
AF_INET went in exactly where phase 2 said it would. socknew dispatches
on the domain, kernel/net/inet.c implements the internet side on lwIP's
raw API, and not one syscall changed shape: bind, connect, listen,
accept, read and write reach the same descriptors they always did. TCP
and UDP both work. cmd/nettest opens a connection, writes, and reads the
answer back.
Two things are owed and named here so they are not discovered later:
recvfrom does not yet report the source address, and the socket paths
poll on the timer tick instead of sleeping on the socket. Both are
follow-ups, not redesigns.
NOTICE carries lwIP's BSD-3 text. Clause 3 is no-endorsement, not the
old advertising clause, so it sits with Apache-2.0 without difficulty.
Verified: the tree builds clean, and the headless boot check passes with
27 [ok] and no failures with the stack compiled in and the thread
running -- which is the part that would break first if netinit deadlocked
or the thread starved anything. An end-to-end connection test belongs in
that suite and is the next commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Groundwork for the unified loader: before the two paths can share code,
they have to agree on what they are producing, and until now they only
agreed by coincidence.
Every field of the loader/kernel hand-off was #defined in whichever file
happened to need it -- kernel/core/main.c, kernel/dev/vga.c,
kernel/arch/x86_64/e820.c, boot/bios/cdboot.S, boot/bios/stage2main.c and
boot/uefi/main.c, six copies of the same addresses. schboot.h existed for
exactly this and held only the entry magic and the RSDP slot, with a
comment describing the rest of the block it did not define.
The whole block lives there now: the VBE info fields, the verbose and
media flags (with the real-mode segment:offset spelling cdboot.S needs),
the e820 count, map and cap, and the RSDP. Every one of those files
includes it instead of restating it.
This is not a tidy-up. It is the same hazard as defining the entry magic
twice, only quieter -- nothing breaks until one copy moves, and the two
loaders diverging is precisely what produced the EFER.SCE and RSDP bugs,
where a fix on one path silently did not exist on the other.
Verified on both firmwares: BIOS boots to schinit with the same e820,
ACPI and VGA lines as before; UEFI reaches cpu0 with 1018 MB in 7 regions
and its own 1280x800 mode. `make iso` still builds. bootcheck 108 [ok].
Next: the loaders become starters that gather firmware-specific facts and
hand to one common stage. That needs the BIOS side to climb to long mode
first, since common code can only be compiled for one CPU mode -- which
is the risky part, and is why the contract went first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
boot/bios/ now holds the MBR, the El Torito stub and the real-mode stage
2; boot/uefi/ is empty and documented.
Separate directories rather than #ifdefs, because the two share almost
nothing. A BIOS loader lives in 16-bit real mode, reaches the firmware
through software interrupts, and walks itself up into long mode. A UEFI
loader is a 64-bit PE that the firmware has already placed in long mode
with paging on, calling services through a table of function pointers.
What they do share is the hand-off contract, which boot/README.md now
writes down: ELF segments placed, long mode, a 24-byte-entry memory map
at E820_MAP_ADDR, framebuffer geometry at VBE_INFO_ADDR.
That contract is the point of documenting it now. UEFI's GetMemoryMap
returns EFI_MEMORY_DESCRIPTORs, and the right move is to translate them
into the entries kernel/arch/x86_64/e820.c already parses rather than
teach the kernel a second format.
Build output paths under $(BUILD)/boot are unchanged; only sources moved.
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz