H3 of docs/plan/hybrid.md -- "a modeset API, which is the thing an
out-of-kernel GPU driver makes affordable and an in-kernel one never got".
# schmode modes
1280x800 *
1280x720
1024x768
800x600
640x480
# schmode 1024 768
1024x768 ok
Captured off the virtio-gpu head, the frames really come back 1280x800,
1024x768, 640x480 and 1280x800 again, with the checkerboard band showing no
shear at any of them.
Nothing in the kernel changed for this. No syscall on the path has heard of
a scanout: schmode writes a line to a socket and vgpud sends five commands
to the device. The comparison is the point -- the same five commands in the
kernel would have been the same five commands *and a reason to be nervous*,
because a wrong one there takes the machine instead of one process. That is
why the in-kernel driver never grew one: not difficulty, exposure.
The framebuffer is allocated once, at the largest mode, and every smaller
mode reuses it. PCIIOC_DMA has no free -- a driver's blocks come back when
it exits and not before -- so a modeset that allocated would spend sixteen
slots and then the arena, and the failure would look like a GPU bug rather
than like counting. A larger mode is refused and says why.
vgpud used to end in for(;;) sleep(100) under a comment arguing that
building a control socket before there is a compositor to judge it is the
mistake this plan warns about. That was right about a *compositor protocol*
and wrong as a reason to have no socket: a modeset has a consumer that
exists, somebody changing the mode and looking at the screen, and schmode
is small enough to judge an interface this small. What is deliberately not
on that socket is everything a compositor would need -- no buffer
submission, no damage, no vblank -- which still waits, for the original
reason.
H4, the USB eviction, is now the only milestone left on the plan and is by
some distance the largest thing on the register.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
H2 of docs/plan/hybrid.md -- the milestone the plan itself calls the one
that proves the whole idea, and the one that cannot be skipped.
# cat /proc/schinit
1 4 11 os.schos.vgpud
# kill 4
schinitd: restarting os.schos.vgpud
vgpud: claimed
vgpud: pid 8 drew a test pattern from userspace
The test pattern ends in a twelve-block tally of the drawing process's
pid, because a second run that redraws an identical picture is
indistinguishable from a first run that never stopped. Read off the
virtio-gpu scanout across four generations it says 4, 8, 10, 12, and the
DMA arena hands back the same physical address every time.
What it took:
* A halt the kernel can apply to a device it does not understand.
Clearing PCI_CMD_BUS_MASTER is the only one there is, and it has to
happen before the DMA goes back to the arena -- a dead driver's device
keeps reading a framebuffer the kernel is about to give to somebody
else. Claim sets the bit, release clears it; pcitest shows it in a bm
column, with a third state so a failed read is never printed as off.
* A refusal. vgpu_release() asks vga_fb_restore() whether there is a
framebuffer to put the console back on, and declines to hand over the
device if there is not. The rule that the kernel keeps a minimal
driver for everything on the path to a shell is worth writing down
only if something enforces it.
* The DMA arena not being owned by two allocators at once. This is the
bug that stopped H2: freevm() frees every mapped page below PHYSTOP
and the arena is the top 16 MB of exactly that range, so a DMA block
mapped into a driver went onto the page allocator's free list when the
driver died, while pciuser_release_all() handed the same pages back to
the arena. The restarted vgpud asked for its framebuffer, got pages
kalloc() had already given out -- including its own page tables -- and
dma_alloc()'s zeroing wiped them, so it died inside the ioctl on the
return from a syscall whose stack had stopped existing. do_dma() now
records a VMA with no_free set, the way shared memory does.
* One exit status. KeepAlive must restart a driver that crashed and must
not restart one that has looked at the machine and found its device
absent: on hardware with no virtio-gpu that was fifteen spawns in
forty-five seconds, each printing a line to the console, for ever.
SCHINIT_EXIT_NORESTART is 78, sysexits.h's EX_CONFIG. It is not a new
manifest key -- the wait status has always travelled from PID 1 to the
supervisor, and note_exit() simply stopped discarding it.
The milestone's third clause, "the compositor reattaches", is not done
and is not claimed: there is no compositor running. That is recorded in
the plan as a Schcom milestone rather than counted here.
Closes the register row "A released PCI device" in docs/plan/1.0.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The site and several documents still described the system as it was before
virtual terminals, the new schinit, the hybrid work and descriptor passing.
docs/architecture/init.md described the wrong program. It documented a single
schinit that parses manifests and supervises jobs, which has not been true since
PID 1 was split: PID 1 forks a supervisor, spawns jobs on its behalf and reaps;
the job table lives in /proc/schinit; a heartbeat runs both ways; and
proc_reincarnate() re-execs PID 1 in place rather than panicking. Rewritten
around what exists, keeping the reasoning that is still load-bearing -- the five
failures of the sibling-init scheme, the escalation ladder, and the three bugs in
the reincarnation path that each had to happen before they were obvious.
docs/plan/init.md is deleted, which is the tree's own rule for finished work and
had not been applied. Fourteen source comments referenced it by part number, so
they are repointed at the architecture doc by section name rather than left
dangling -- a deleted document nobody notices is worse than a stale one.
docs/architecture/devices.md gained the section it has been missing since
/dev/pci existed: what a driver needs from a kernel, why mmap is checked against
the caller's claims, why DMA is a call and not a mapping, and why the write back
after an interrupt is not optional. Also that a released device does not come
back by itself, which is true and was nowhere.
docs/architecture/networking.md gained a descriptor-passing section, and
docs/architecture/README.md's stack diagram gained the two layers and the third
seam it was missing. "Two seams hold the whole thing together" has not been true
since /dev/pci.
docs/plan/README.md said the hybrid work was deliberately last, on the argument
that an interface with no consumer is wrong in ways nobody can see. The argument
was right; the conclusion was not, and the document now says why it changed --
the alternative to a driver compatibility layer is writing a driver for every
device that exists, and the original objection is answered rather than ignored
because SchOS's own drivers are the consumers.
The site: a Hybrid section with the eviction transcript, cards for virtual
terminals, schinit and drivers outside the kernel, and the numbers remeasured
rather than estimated -- 46,961 lines, 207 syscalls. The boot log in app.js is
from a boot taken today, and the lines are trimmed to what the console can show
without clipping, each still a verbatim prefix of real output.
Two small rendering fixes found by looking at the pages rather than assuming:
.console pre's min-height is now scoped to the hero, so a static transcript sizes
to its content instead of reserving eight lines it does not have; and the docs
reader's contents panel strips inline marks from headings, so a heading written
`proc_reincarnate()` no longer carries its backticks into the sidebar.
Every intra-doc link checked; none broken.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz