e1000 -- Linux's, unmodified -- probes, opens, gets an address by DHCP and
carries ping traffic in a SchOS process. The kernel was driving that NIC and
gave it up, which makes it the first real handover as well as the second
driver.
None of what it needed was a missing feature. Every one was a call that
succeeded, returned zero and did nothing:
_find_next_bit "bit 0 is set" -- for_each_cpu never ended
netif_carrier_off carrier already up -- TCTL.EN never set
__x86_indirect_thunk_r8 the jump discarded -- 255 rx buffers, none made
dma_map_page_attrs bus address 0 -- NIC aimed at physical 0
so the rule from memcpy is now general: a stub returning zero is unsafe
wherever zero is a meaningful answer.
The loader grew ko_fixup_percpu(). The stack guard turned out to be one
per-CPU variable among several; `current` cannot be defused because the driver
dereferences it. Taking the %gs off instead leaves the same opcode reading the
same width from storage the host supplies -- a per-CPU variable in a
single-threaded host is just a variable. Eight bytes become seven and a nop,
and the displacement is not always last, so there is now just enough of an x86
decoder in ko.c to know how long the instruction is.
ldls/kpi/thunk.c is fifteen lines of assembly and the highest-value file here:
retpolines are control flow, and a stub cannot stand in for a jump.
The kernel side:
- ioperm.c, the TSS I/O permission bitmap. A driver's outl is an instruction,
not a call, and e1000's reset path picks it deliberately. IOPL=3 would hand
over the PIC and the disk with it, so it is per-port. Writing it found that
the I/O map base had been written at offset 64 rather than 102, leaving the
CPU checking ports 0-831 against the TSS's own RSP0.
- claim masks the device's IRQ line: 450,000 a second, otherwise.
- net_detach(), the missing half of net_attach_late(). An interface left in
the stack keeps its route and sends every frame to a driver that refuses
it, which looks exactly like a userspace driver that does not work.
- e1000_release() gives up the interface, not just the hardware.
8139too still passes 4/4; ldls-check still passes 27; four CPUs, no panic.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/ldls.md milestone L2, less the half that needs /dev/pci.
In Linux, __pci_register_driver ends at the PCI core, which matches a
driver's id_table against the bus and calls probe(). There is no PCI core
here, so LDLS keeps the pointer that call was given and plays the part.
To do that it must know where pci_driver.probe is, and it asks the kernel
rather than being told by us. ldls/btf.c reads /sys/kernel/btf/vmlinux --
122,279 types, every struct layout and every function prototype, as generated
data describing the kernel that is installed. Implemented from
Documentation/bpf/btf.rst, which is a published specification.
$ ldls-types /sys/kernel/btf/vmlinux --need
pci_driver probe offset 16 size 8
pci_dev resource offset 1000 size 1088
resource start offset 0 size 8
all present
Cross-checked against pahole on the same file, field for field. No offset in
this is ours, which is rule 3's uncomfortable row disappearing rather than
being argued about.
And then the driver:
driver name "8139too"
devices it claims: 10ec:8139 ... and 16 more
calling probe(pci_dev 10ec:8139, ...)
1 alloc_etherdev_mqs(0x368, 1, 1)
2 pci_enable_device / 3 pci_request_regions / 4 pci_set_master
5 pci_iomap(pdev, 1, 0)
6..544 ioread8 / iowrite8 -- 0x88, 0x8a, 0x8c, 0x8e, over and over
545 dev_addr_mod / 547 netif_napi_add_weight_locked
549 timer_init_key / 550 register_netdev / 551 netdev_info
probe returned 0 after 552 stub call(s)
10ec:8139 is the real RTL8139 id. It mapped BAR 1, the one marked
IORESOURCE_MEM. Those 538 alternating byte accesses stepping 0x88/0x8a/0x8c/
0x8e are serial EEPROM clocking -- the driver bit-banging the chip for its MAC
address and handing the result to dev_addr_mod. Then NAPI, a watchdog timer,
register_netdev, its "found it" line, and zero.
Fifteen distinct symbols carry that entire probe, and three of them are 540 of
the 552 calls. L1 said 44 symbols carry 110 modules through init; L2 says 15
carry this one through probe. Neither is a number anyone would have guessed
and both came from running the thing.
Recorded as not done, because it is not: probe receives a pci_dev whose shape
is right and whose contents are invented. The BARs are made up, pci_iomap
returns a zeroed page, and 8139too read a MAC address of zeroes and was
perfectly happy about it. The "all through /dev/pci" half of L2 belongs to the
SchOS side. Also recorded: BTF has to come from somewhere, and SchOS has no
/sys/kernel/btf/vmlinux -- the user brings it with the module, from the kernel
the module was built for.
make ldls-check is 27 checks, four of them L2's, and it says so out loud when
it skips them on a machine with no BTF rather than passing silently.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz