Groundwork for usb-tablet, which is the fix for the guest cursor and the
host's never being in the same place: a PS/2 mouse reports how far it
moved, two pointers accumulating deltas independently drift apart, and no
amount of care in the compositor can make them agree. An absolute device
reports where it is, so they coincide by construction.
- the HID driver no longer matches the boot subclass only. usb-tablet
declares subclass 0 and was refused at the door; hid_probe decides
what an interface actually is, and still declines what it cannot make
sense of.
- a non-boot HID interface is taken to be an absolute pointer and is
not asked for boot protocol, which it does not have -- that request
failing is what stopped it binding.
- tablet_report decodes the fixed 6-byte layout (buttons, 16-bit X,
16-bit Y, wheel) and scales the logical range to pixels there,
because it is the only place that knows the range.
- input_mouse_abs reports EV_ABS/ABS_X/ABS_Y so a reader can tell an
absolute position from a delta, and mouse_set_abs places the pointer
rather than nudging it.
- Schcom treats EV_ABS as authoritative and EV_REL as a nudge.
The device binds and identifies correctly: "usb-hid: tablet (absolute) on
slot 1, endpoint 0x81 every 4 ms".
It is NOT finished, and QEMU_INPUT is empty by default because of it. No
reports have yet been observed arriving on the tablet's interrupt
endpoint, so making it the default pointer would trade a cursor that
drifts for one that does not move at all. Opt in with
make qemu QEMU_INPUT='-device qemu-xhci,id=xhci -device usb-tablet,bus=xhci.0'
Next step is to find out why nothing arrives: whether the first transfer
is queued but never completes, whether a completion needs re-arming for
this endpoint, or whether QEMU is not routing motion to the tablet at all
(`info mice`).
bootcheck 108 [ok], schcom-test passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
kernel/dev/mouse.c held the pointer inside literal 800x600 bounds. That
was correct while 800x600 was the only mode the loader could set, which
it was until the resolution became a boot-time choice. At 1280x800 the
pointer simply stopped two thirds of the way across and would not go
further -- which reads as the cursor drifting away from the host's rather
than as a clamp.
vga.c grows vga_get_width/vga_get_height for it. The mode is chosen at
boot now, so nothing above the framebuffer may hardcode its size, and
these are the first two callers that needed to ask.
Verified that the system still builds and boots at 1280x800, and that
bootcheck is 108 [ok] and schcom-test passes. I did not manage to
photograph the pointer past the old limit in the time available -- there
is no reader for /dev/mouse in the image and the screendump attempt did
not resolve, so the fix rests on inspection rather than on a picture.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Nothing outside the kernel could touch a disk. sys_mount does not even
look at the device it is handed -- it mounts the one SchFS volume found
at boot and ignores `source` -- so a program had no way to read a
partition table, format a volume or write a boot sector. An installer is
a program that needs all three, so this is the first piece of it.
A character device in devsw rather than a separate block layer, because
that is where the offset already lives: fileread/filewrite pass f->off
and advance it by what comes back, which is everything a seekable device
needs. The minor is the IDE device number, the same numbering iderw()
uses; two schemes for the same disks would be a bug waiting to happen.
Writes bypass every filesystem above them, which is inherent to a raw
device and why an installer must target a disk it has not mounted.
The nodes are created unconditionally, like every other entry in /dev.
That matters more than it looks: with no node, `echo x > /dev/hdb`
silently creates an ordinary file of that name and appears to work. It
did, and it agreed with itself on read-back; only the host's copy of the
disk showed nothing had been written.
st_rdev was never filled, so every node in /dev reported "0, 0" under
ls -l. Harmless while nothing read it, wrong as soon as something has to
tell two disks apart. Filled with the full Linux dev_t encoding rather
than (major << 8 | minor), which only works while both stay small.
Verified against the host as an independent oracle, both directions: the
guest wrote to /dev/hdb and the host saw those bytes at offset 0; the
host wrote at offset 4096 and the guest read them back with dd skip=.
ls -l now shows 1,1 for console, 2,0 for fb0 and 8,1 for hdb.
Known limit, commented in disk.c: devsw passes the offset as a 32-bit
uint, so a raw disk is addressable to 4 GB. That must be widened before
anyone installs onto a real disk.
bootcheck 108 [ok] with -Fb -Tty -Usb -Sock -Evdev -Ps.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Every driver reached its registers with P2V(bar.base), which assumes the
BAR sits inside the 0-4 GB the direct map covers. Under SeaBIOS it always
does. Under OVMF it does not: firmware may place a 64-bit BAR anywhere,
and it puts virtio-gpu's at about 768 GB. P2V produced an address with no
translation behind it, so the driver's first register write took a page
fault, then a double fault, then a triple fault and a reboot loop --
which, coming from a driver bind, reads as broken hardware rather than a
missing mapping.
ioremap() carries each region on a 1 GB page in PDPT entries 4-511, which
were unused: the direct map occupies 0-3, and kpml4[0], kpml4[KERNBASE]
and every process's PML4 all share that one table, so a mapping appears
in every address space at once with no page table to allocate. The pages
are cache-disabled and write-through for the same reason the top GB of
the direct map is -- these are registers, and a write sitting in a cache
line is a write the device never sees.
A physical address below 4 GB returns the direct-map address unchanged,
so the BIOS path, where every BAR is low, is byte for byte what it was.
virtio-gpu now initialises under OVMF (1280x800, queue 64) instead of
triple faulting. e1000 and xhci had the identical latent bug; xhci was
already refusing to bind above 4 GB with a comment saying the mapping did
not exist yet, and now it does.
BIOS unchanged: bootcheck 108 [ok] with -Fb -Tty -Usb -Sock -Evdev -Ps,
e1000 and xhci both binding.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
