The virtual terminals never drew a cursor. Each now paints a steady
block (the cell with its colours swapped), erased before and redrawn
after every output byte, redrawn by a repaint, and hidden by
ESC [ ? 25 l as curses programs ask.
r8169 under LDLS on the TUF A15 got through probe and died in ndo_open
on __fortify_panic. netdev_priv() is `dev->priv` now, a flexible array
counted by net_device.priv_len, and rtl_open's memset of its ring
bookkeeping is bounds-checked against it. The allocator left priv_len
zero, so the driver saw an area of no bytes. It is set from BTF when the
kernel has the member. __fortify_panic also says which check, how many
bytes it had and wanted, and where from.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015f73FesGZGYPkmDvUcj6QX
Sixty-five headers sat side by side in include/, so `#include "irq.h"`
said nothing about where irq.h was or what it belonged to, and errno.h,
stat.h and fcntl.h at the top shadowed the system's for any host tool
built with -I./include. They are in folders now -- arch/ core/ fs/
dev/ gfx/ net/ uapi/ (and ldls/ for the Linux driver layer) -- and
every include names the folder, as Linux's do: "core/proc.h".
Done mechanically and checked the hard way: the kernel built from this
tree disassembles identically to the one built from the tree before
it. The full image boots, and userland is the same set of programs.
Paths in docs and comments follow; docs/guides/layout.md has a table
of what is where, and tools/fix-includes.py rewrites old-style
includes from the folders in the tree, for code written before this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Nexoniarz is the sole author and SchOS was never published under
Apache-2.0, so this is a straight relicence. LICENSE is the FSF GPLv2 text,
every first-party SPDX header moves to GPL-2.0-or-later, and NOTICE,
README.md, docs/licensing.md and the site say so. projects/schfs-linux
follows the rest of the tree.
The GPL gives copyleft: a fork has to ship its source. It also lifts the
old "Linux drivers, never" rule, since GPL-2.0-only code combines with
GPL-2.0-or-later. "Or later" leaves room for GPLv3, but one binary still
has to pick one version, so docs/licensing.md now keeps Apache-2.0 and
GPLv3 code out of the kernel to keep Linux code possible there. BSD
4-clause code goes from "avoid" to "no", because the advertising clause
is GPL-incompatible.
LDLS still ships no .ko. That boundary is now project policy rather than
a legal requirement, and ldls.md, devices.md and licensing.md section 6
say so. refmod declares license=GPL, and ldls-check passes (27 checks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
e1000 -- Linux's, unmodified -- probes, opens, gets an address by DHCP and
carries ping traffic in a SchOS process. The kernel was driving that NIC and
gave it up, which makes it the first real handover as well as the second
driver.
None of what it needed was a missing feature. Every one was a call that
succeeded, returned zero and did nothing:
_find_next_bit "bit 0 is set" -- for_each_cpu never ended
netif_carrier_off carrier already up -- TCTL.EN never set
__x86_indirect_thunk_r8 the jump discarded -- 255 rx buffers, none made
dma_map_page_attrs bus address 0 -- NIC aimed at physical 0
so the rule from memcpy is now general: a stub returning zero is unsafe
wherever zero is a meaningful answer.
The loader grew ko_fixup_percpu(). The stack guard turned out to be one
per-CPU variable among several; `current` cannot be defused because the driver
dereferences it. Taking the %gs off instead leaves the same opcode reading the
same width from storage the host supplies -- a per-CPU variable in a
single-threaded host is just a variable. Eight bytes become seven and a nop,
and the displacement is not always last, so there is now just enough of an x86
decoder in ko.c to know how long the instruction is.
ldls/kpi/thunk.c is fifteen lines of assembly and the highest-value file here:
retpolines are control flow, and a stub cannot stand in for a jump.
The kernel side:
- ioperm.c, the TSS I/O permission bitmap. A driver's outl is an instruction,
not a call, and e1000's reset path picks it deliberately. IOPL=3 would hand
over the PIC and the disk with it, so it is per-port. Writing it found that
the I/O map base had been written at offset 64 rather than 102, leaving the
CPU checking ports 0-831 against the TSS's own RSP0.
- claim masks the device's IRQ line: 450,000 a second, otherwise.
- net_detach(), the missing half of net_attach_late(). An interface left in
the stack keeps its route and sends every frame to a driver that refuses
it, which looks exactly like a userspace driver that does not work.
- e1000_release() gives up the interface, not just the hardware.
8139too still passes 4/4; ldls-check still passes 27; four CPUs, no panic.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/ldls.md L3d, and with it L3 -- the milestone the plan calls the one
that proves the whole idea and the one that cannot be skipped.
# ldlsd /lib/modules/8139too.ko /lib/modules/btf &
kpi: the driver read a MAC off the hardware: 52:54:00🆎cd:ef
ndo_open returned 0
carrying frames. the interface is ldls0.
# cat /proc/netif
interface ldls0 state up address 10.9.0.15 gateway 10.9.0.2
# ping 10.9.0.2 4
64 bytes from 10.9.0.2: icmp_seq=1 time=30 ms
64 bytes from 10.9.0.2: icmp_seq=2 time=20 ms
64 bytes from 10.9.0.2: icmp_seq=3 time=20 ms
64 bytes from 10.9.0.2: icmp_seq=4 time=20 ms
10.9.0.0/24 is reachable only through ldls0, and ldls0 is 8139too running in a
SchOS process. The address was obtained by DHCP over the same driver first.
lwIP -> netdev_ops -> /dev/netdev -> ldlsd -> ndo_start_xmit -> a BAR mapped by
/dev/pci -> the wire, and the whole way back. Nothing in the kernel knows a
Linux driver is involved; nothing in the driver knows it is not in Linux.
It polls rather than taking interrupts. /dev/pci delivers them by blocking
read(), which needs a thread this program does not have, so the driver's NAPI
poll is called from a loop instead -- the same work in a context LDLS can
provide, at the cost of latency and a spinning process.
Four things Linux's alloc_etherdev does that allocating does not, each found by
the driver faulting on it: dev->dev_addr is a pointer aimed at perm_addr;
dev->mc and dev->uc are list heads and are empty only when they point at
themselves; dev->_tx is an array of netdev_queue, because netif_start_queue
clears a bit in _tx[0].state; and __LINK_STATE_START is set by dev_open before
ndo_open is called.
Two did not announce themselves, and they are the ones worth recording.
netif_running(dev) gates 8139too's receive loop. Without it the chip received
the frame, the driver acknowledged the interrupt and left the loop, and nothing
came out -- while every counter said packets were arriving. Found by reading
the chip's own CBR register through the BAR and seeing the hardware had written
600 bytes the driver never collected.
memcpy was still a logging stub. The driver copied each frame into its sk_buff,
the copy did not happen, and the stack was handed exactly the right length of
zeroes; DHCP never completed and nothing reported an error. A stub that returns
zero is not safe for a function whose whole job is a side effect, and the
memory primitives are the worst case because they fail silently and plausibly.
ldls/kpi/string.c exists because of it.
Still one driver, one kernel version, tried once, against an emulated card --
which is what the plan has always promised and is worth repeating next to a
working ping.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
