Two things, both asked for.
**The crash report no longer says which monitors it reached.** "The report is
on the virtio-gpu display too" was a line about the crash screen printed on the
crash screen. The report says what happened and where to read it again; that is
not part of it.
**And the second head now shows the F8 menu and the boot.** It used to be black
until vgpud started several seconds into userspace -- through the splash,
through the menu, through every boot message -- which from the outside is
indistinguishable from a display that does not work. Three stages now cover the
whole boot and hand over to each other without coordinating:
*The loader.* LocateProtocol() answers with the first GOP and offers no way to
ask for the rest, so the rest are found by handle and fed the primary's
framebuffer as a Blt source at the points where a screen is finished: the menu,
the resolution chooser, system information, the splash, each segment of the
kernel load. Blt rather than a second framebuffer to draw into, because a
virtio GOP does not have one -- the same fact that made a virtio-only machine
reboot-loop two commits ago.
*The kernel.* gfx remembers which rows were drawn, as one span rather than a
list of rectangles, because console output is lines and a span is what lines
make. display_mirror_console() copies that span across: a line of boot text is
one cell-row transfer, not a screen. Primed once after pci_init(), because a
display that has just appeared has a black scanout and the console it should be
showing was drawn by the loader into a framebuffer it knows nothing about.
*Then vgpud*, from the same console framebuffer, unchanged.
**Two bugs found building it, both worth the retelling.**
The mirror ran per character from inside vt_feed -- which is inside the console
lock -- and vga_disp_acquire() announces its back buffer with a cprintf. A CPU
taking a lock it already holds, with a call chain that said exactly that. It
runs at the end of consolewrite() and cprintf() now, outside the lock, which is
also the better batching: one transfer per write instead of one per character.
And "is this the console's own screen" was asked of the pointer acquire()
returned. vga_fb hands back a back buffer it copies onto the console's
framebuffer afterwards, so on a one-screen machine the answer was "a different
screen" -- and the console was mirrored onto itself through two megabytes of
intermediate, allocated for the purpose. display_ops grew scanout_phys, which
is a fact about the hardware rather than a policy a driver can get subtly
wrong, and it is asked first: it has no side effects and acquire() has two.
Verified with two heads under QEMU, screendumping the virtio head every 400 ms
from power-on: splash, splash, splash, then the console, and it stays. The F8
menu appears on it; choosing 1024x768 there brings both heads up at 1024x768
byte-identical. A panic still reaches both. Both supported configurations: one
boot each, no traps, no panics, socktest and memfdtest green.
One gap remains and is documented rather than hidden: while the kernel's driver
resets the device during probe, QEMU shows "Display output is not active" for a
fraction of a second. A device being taken over has no scanout until the new
driver sets one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Four complaints, and only one of them was the thing it looked like.
**"toybox is too small."** Half true, and the fix cost no licensing at all:
236 of toybox's applets are what defconfig builds, and the rest live in
toys/pending/ -- awk, bc, diff, more, expr, tr, hexdump, stty among them. Same
0BSD tarball, switched off by a config default. 26 of them are on now, 236 ->
268. Not everything: strace wants ptrace, syslogd wants BSD's facilitynames[],
git wants OpenSSL, and those three break the link.
The toybox build also works again on this machine. Its scripts start
#!/bin/bash, which does not exist on NixOS, so the binary in the tree was one
nobody could reproduce; the shebangs are rewritten to /usr/bin/env bash on the
way in. Pending applets are enabled by editing .config directly, because
`make oldconfig` is the obvious way and undoes it -- every pending symbol is
`default n`.
**BusyBox was asked for and is not here.** It is GPL-2.0-only, and `make
ramroot` links the root image *into the kernel binary*, so it would put GPLv2
inside an Apache-2.0 executable -- which is the exact case ports/Makefile's
NOTPORTS filter and docs/licensing.md §4 exist for. nano is the same answer one
version later. Both recorded in licensing.md with what was done instead, since
"no" without an alternative is how a rule gets quietly broken later.
**An editor that is not vi.** kilo, BSD-2-Clause, one 1300-line file, no
dependencies beyond termios and TIOCGWINSZ, both of which zsh already needed.
Installed as /bin/edit as well as /bin/kilo, because somebody with a file to
fix will type `edit`.
**"wget doesn't work."** Not a userland problem, and BusyBox's wget would have
failed identically: nothing on this system could turn a name into an address,
so every program taking a hostname failed in its own way and each looked like
a separate bug. There is still no DNS client in SchOS and there does not need
to be -- musl has a complete resolver and it works over ordinary UDP sockets.
The one missing fact was which nameserver, which the kernel has had all along
from DHCP and never published. /proc/resolv.conf publishes it in resolv.conf's
exact syntax; cmd/resolvconf decides whether it becomes /etc/resolv.conf, and
will not overwrite a hand-written one without -f.
# wget -O - http://example.com/ | head -1
<!doctype html><html lang="en"><head><title>Example Domain</title>
**Something to host with.** cmd/httpd: GET and HEAD, static files, index.html
for a directory and a listing otherwise, a child per connection. No CGI, no
keep-alive, no TLS, no config file. The path check is the only
security-relevant code in it and it refuses rather than normalises -- no
component may be `..`, and percent-decoding happens first, because %2e%2e is
`..` and a check before decoding does not see it. Both forms answer 403.
And the disk is 100 MB, from 32. It is sparse, so the image is 21 MB on the
host. RAMDISK_BLOCKS went 6000 -> 8000 with it: the ramdisk was at 86% and the
next thing added would have broken `make ramroot`, which nobody would have
noticed until they used it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Porting zsh found four defects in the kernel and one in the filesystem. None
of them were about zsh; all of them had been there the whole time.
**exec threw the environment away.** kernel/fs/exec.c wrote a single zero for
envp with the comment "(no environment)" -- not yet, but ever, for every
process. musl has been passing a perfectly good envp to execve (Linux 59, which
SchOS answers) and it was never read. So $TERM was unset, $PATH was whatever
each program invented, and a variable exported in a shell did not survive the
exec meant to carry it. exec() takes an envp, sys_exec reads argument three,
and schinit manifests grew an Environment key. The userland two-argument
exec(path, argv) stays as a wrapper that passes null explicitly -- the raw stub
is execve now, so a short caller cannot leave %rdx holding a stray pointer.
**Which overflowed the kernel stack.** Three pointer arrays, ~1.8 KB, on a
4096-byte stack, under exec -> loaduvm -> readi -> SchFS -> btree. Pid 1 went
down on the first exec. The canary caught it and named the process, which is
what it is for. They live in one kalloc'd page now.
**waitpid returned a bare -1** for both "no children" and "interrupted". musl
reads [-4095,-1] as -errno, so userspace saw EPERM; zsh printed "wait failed:
operation not permitted" and abandoned the rest of /etc/zsh/zshrc. -ECHILD and
-EINTR now. Third time a bare -1 has cost real time -- on a system with no
permission model, EPERM should be read as "a syscall returned -1".
**NVMA was 64.** musl's allocator takes a mapping per size class and does not
release them eagerly, so compinit ran out of slots and got -1, which is EPERM,
which malloc turns into NULL, which zsh reports as "fatal error: out of memory"
-- on a machine with 1000 MB free. 256 slots, and -ENOMEM.
**And a small write to SchFS costs 58 ms.** 200 writes to one open file take
11.75 s; the same to /dev/null take 0.14 s. That is the design stated at the
top of kmount.c -- one transaction group per operation, and a commit is two
flushes and an uberblock -- not a bug. But compdump writes its digest with
thousands of separate prints, so it takes minutes and looks like a hang.
compinit -D, which skips the dump, finishes in 3.6 s. This one is a decision
rather than a fix, so it is written up and left: /etc/zsh/zshrc keeps compinit
switched off and explains exactly why, with the measurements.
zsh runs as /bin/zsh and is the console shell. ZLE works -- arrow keys recall
history through terminfo, $COLUMNS reads the real 160 because TIOCGWINSZ was
fixed, colour and prompt expansion work, startup is 0.14 s. mksh keeps /bin/sh,
so schinit's no-jobs fallback is a different program from the one that could
have failed.
Also fixed while here: AT_CLKTCK was the literal 100 and is USER_HZ; the
extract rule in four ports could move a source tree inside itself when make
re-ran it, which is how zsh's configure came to write modfile=zsh-5.9/... into
config.modules and fail three steps later.
schfs-check passes. Full writeup in docs/history/kernel.md section 14.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch builds and runs on SchOS:
OS: SchOS 0.1.0 x86_64
Kernel: SchIFT 0.1.0
Shell: sh Terminal: schinit
CPU: AMD Ryzen 7 5700G
Memory: 11.94 MiB / 1016.93 MiB (1%)
Disk (/): 4.64 MiB / 31.25 MiB (15%) - schfs
Here because it is a good acceptance test, not because SchOS needs a fetch
tool. It is ~410 C files somebody else wrote against Linux rather than against
our bugs, and running it exercises procfs, per-process directories, uname,
statfs, getpwuid, terminal detection by walking ppid, and an ANSI renderer all
at once -- which is the shape docs/plan/roadmap.md asked for when the previous
full-stack test was removed.
patches/ is empty and should stay that way. When fastfetch cannot detect
something the answer is to give the system the thing it is looking for, because
every other program looks for the same things. Its first run reported four
misses and they are being worked in that order:
OS: Could not detect OS -> /etc/os-release, this commit
Local IP: getifaddrs() failed -> AF_NETLINK, next
Host: not set by O.E.M. -> DMI in /sys, later
Users: Unable to detect any users -> utmp, a userland convention
Four things the port needs that say nothing about SchOS, recorded in the
Makefile because each cost time to find:
* Every ENABLE_* off. All 29 files calling dlopen are optional detection
modules, and ENABLE_THREADS=OFF removes the single pthread_create -- which
matters, because clone() here does not share an address space.
* -isystem the compiler's own include dir. -nostdinc removes it too, and
cpuid.h is emitted by the compiler with no musl equivalent.
* Linux UAPI headers. musl ships none by design; a musl toolchain is normally
paired with a separate linux-headers install.
* libgcc on the link line, and libc twice -- libgcc pulls symbols back out of
it (__popcountdi2), and a static link resolves left to right.
The toolchain settings are a CMake toolchain file rather than command-line
flags because CMAKE_*_INIT variables are only honoured when the cache is first
created. Reconfiguring an existing build directory ignores them silently.
Also rebuilt musl: build/ports/musl/prefix/bin/musl-gcc had the pre-move path
/home/nexoniarz/Documents/SchOS baked in by configure. The tree does not use
that wrapper -- it links with explicit -I/-L and crt objects -- so nothing was
broken by it, but it was stale and would mislead anyone who found it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
lwIP 2.2.0, fetched by ports/lwip and compiled straight into the kernel.
Not written from scratch, and the reason is not the packet formats: it is
congestion control, retransmission, window management and twenty years of
corner cases that only show up against a real peer. Not FreeBSD's
netinet either, though the licence would have allowed it -- that stack is
not a library, it reaches into mbufs, epoch(9), netisr, VNET and uma(9),
so adopting it means porting FreeBSD's kernel infrastructure first. lwIP
was written for exactly this situation: a small kernel with a raw
Ethernet driver and a port layer of a few hundred lines.
It is kernel code, so nothing is installed into the sysroot and there is
no second build system: the top-level Makefile compiles the files it
wants against our port headers. The file list is explicit rather than a
wildcard, because lwIP ships IPv6, 6LoWPAN, PPP, SLIP, DNS-SD and a dozen
apps in the same tree, and building what is not configured yields either
dead code or a link error naming a port function nobody meant to write.
Its sources are unmodified and its warnings are silenced for its files
only -- patching them would mean maintaining a fork.
The port layer is ours: a lock, a clock, the netif that hands frames to
e1000, lwipopts.h, and a shim/ directory of tiny headers so lwIP's
<string.h> and friends resolve to the kernel's functions instead of the
host's, whose prototypes disagree and would otherwise be found on the
default include path.
NO_SYS=1, so lwIP has no threads of its own and one kernel thread feeds
it. A thread rather than the interrupt handler, because a call into lwIP
can reach the driver, the driver can sleep, and an interrupt handler
cannot -- so the interrupt still only clears the cause register and the
thread polls. kthread_create is new and generally useful: a process with
a kernel-only page directory, no files, no cwd, no parent, dispatched
from forkret, which can therefore sleep and be preempted like anything
else. DHCP obtains an address at boot and the console says which one.
AF_INET went in exactly where phase 2 said it would. socknew dispatches
on the domain, kernel/net/inet.c implements the internet side on lwIP's
raw API, and not one syscall changed shape: bind, connect, listen,
accept, read and write reach the same descriptors they always did. TCP
and UDP both work. cmd/nettest opens a connection, writes, and reads the
answer back.
Two things are owed and named here so they are not discovered later:
recvfrom does not yet report the source address, and the socket paths
poll on the timer tick instead of sleeping on the socket. Both are
follow-ups, not redesigns.
NOTICE carries lwIP's BSD-3 text. Clause 3 is no-endorsement, not the
old advertising clause, so it sits with Apache-2.0 without difficulty.
Verified: the tree builds clean, and the headless boot check passes with
27 [ok] and no failures with the stack compiled in and the thread
running -- which is the part that would break first if netinit deadlocked
or the thread starved anything. An end-to-end connection test belongs in
that suite and is the next commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz