The virtual terminals never drew a cursor. Each now paints a steady
block (the cell with its colours swapped), erased before and redrawn
after every output byte, redrawn by a repaint, and hidden by
ESC [ ? 25 l as curses programs ask.
r8169 under LDLS on the TUF A15 got through probe and died in ndo_open
on __fortify_panic. netdev_priv() is `dev->priv` now, a flexible array
counted by net_device.priv_len, and rtl_open's memset of its ring
bookkeeping is bounds-checked against it. The allocator left priv_len
zero, so the driver saw an area of no bytes. It is set from BTF when the
kernel has the member. __fortify_panic also says which check, how many
bytes it had and wanted, and where from.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015f73FesGZGYPkmDvUcj6QX
Epiphany's main thread spun at 100% on GLib's network monitor. GLib
sizes each netlink datagram with recvmsg(MSG_PEEK|MSG_TRUNC) and no
buffer; that answered 0, GLib read 0 bytes, the answer stayed queued and
poll() said readable again, forever. recvmsg on netlink now peeks
without consuming and with MSG_TRUNC returns what is waiting. A drained
netlink socket also no longer reports hangup -- it has no peer, and
sock_hup took that for a closed one.
SCM_CREDENTIALS under SO_PASSCRED named the process that created the far
end, not the one that wrote to it. For a socketpair those differ: WebKit
makes the pair, hands one end to a child, and learns the child's pid
from the credentials on its first byte. Each end now records its last
writer.
LDLS: napi_consume_skb frees the skb. r8169 frees every sent frame with
it, and as a stub it leaked one per frame until the DMA heap ran out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The RTL8168 is now driven by Linux's r8169, unmodified, in a process.
`make ldls-r8169` stages it from the running kernel together with libphy,
mdio-bus, mdio_devres and the Realtek PHY driver, the kernel's BTF and
the RTL PHY firmware, and etc/schinit/ldls-r8169.job starts it at boot
with its log in /var/log/ldls-r8169.log. The native driver is out of the
registry; its code, now with Linux's 8168H setup, stays as the fallback.
LDLS grows what that needed:
- ldlsd loads a comma-separated module set in dependency order, each
linking against the ones before it, with BTF read before any
init_module runs;
- a driver core (bus match, driver probe), devres, kernel printf, real
udelay/msleep/ktime and 1000 Hz jiffies, phylib's bitmaps and
link_mode_params, firmware from /lib/firmware, and the symbols whose
stub zero was a lie (list validity, try_module_get, dev_err_probe,
eth_platform_get_mac_address);
- pdev->bus is a real pci_bus, and cmovcc from per-CPU memory is
rewritten like the other %gs forms.
In QEMU all five modules load, link and initialise, and r8169 registers
and finds no device. Probe and traffic are untested until real hardware.
The kernel turns ASPM off on Realtek NIC links at boot, as r8169 does
through pci_disable_link_state, which a process cannot.
Idle CPUs enter ACPI _CST's C2 (CC6 on Zen) by port read or MWAIT when
the APIC timer keeps running, instead of only ever halting at C1.
docs/plan/gpu.md: amdgpu and nouveau through LDLS, with measurements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Caps, Num and Scroll Lock now light their LEDs on PS/2 and USB keyboards,
share one state between keyboards, and stop toggling on key repeat. X sets
them through evdev writes while it holds the keyboard.
Unmapping memory in a process with threads on other CPUs now flushes their
TLBs with an IPI. Without it a freed page stayed reachable through stale
translations, which corrupted Epiphany's heap on SMP.
ACPI batteries and AC adapters appear under /sys/class/power_supply.
/proc/<pid>/maps lists file mappings, and a process killed by a fault
names the file and offset it died in. r8169 gets a 256-entry RX ring.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
EPOLLET reported a descriptor again only after a scan had seen it not
ready. Xorg watches its clients edge-triggered; when it read part of a
client's requests and more arrived before its next scan, the socket never
looked not-ready, so it was never reported again -- X waiting on the
client, the client waiting on X. One CPU almost never hit it; on a 16-thread
laptop the desktop froze within seconds: Window Maker's menu stuck, xterm
never mapped, text gone, and Caps Lock dead because X owns the LED.
Now a still-ready descriptor is reported again whenever anything has
signalled readiness since its last report (poll_generation()), which may be
spurious, as EPOLLET permits, and is never missed. Reproduced and verified
with QEMU at -smp 8: the root menu works and xterm runs cmatrix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
- Anonymous memory can be reserved without being backed: large mappings,
MAP_NORESERVE and PROT_NONE are recorded and each page appears, zeroed,
on first touch -- from trap() for the program, from uva2ka() for the
kernel on its behalf. WebKit reserves 4 GB at start and touches a sliver;
backing it all failed with ENOMEM and Epiphany aborted.
- r8169: the 8168G generation and later (the laptop's 8168H, XID 541) are
taken from the firmware's out-of-band mode, get their PLL powered, the
receive gate opened, and their PHY reached through the OCP window. The
PHY's power-down bit is cleared; the old code kept it while restarting
autonegotiation. Untested on the hardware so far.
- The network thread follows each device's link into lwIP. The link was
read once at attach, 0.02 s into boot; real autonegotiation takes
seconds, so on hardware the interface stayed down for good.
- Twelve terminals, switched with Ctrl+Alt+F1..F12 by default: the keys X
uses, so the console and the desktop agree. AltGr+F-key is gone from
the defaults (chvt -c altgr+F brings it back).
- SO_PASSCRED on Unix sockets, with SCM_CREDENTIALS delivered by recvmsg.
WebKit sets it on its IPC sockets and aborted when refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
What installing and starting Epiphany ran into:
- inotify: inotify_init/init1, add_watch, rm_watch, as a new kind of event
descriptor. The filesystem reports creates, deletes, renames (with a
cookie pairing MOVED_FROM and MOVED_TO), writes, close-after-write,
truncation and attribute changes, to watches on the inode and on its
directory with the name. ONESHOT, MASK_ADD, MASK_CREATE, ONLYDIR,
DONT_FOLLOW, IGNORED on removal, Q_OVERFLOW, and Linux's coalescing of
repeated events. The hooks cost one load when nothing is watched. Without
it GLib found no file monitor and GNOME programs aborted.
- FIONREAD on inotify descriptors and pipes (inotifywait sizes its buffer
by it).
- fsync and fdatasync had no Linux numbers since the first commit: GLib's
atomic writes, gtk-update-icon-cache and dbus-uuidgen all got ENOSYS.
- faccessat2, the flags-taking faccessat musl uses for any flags.
- sendmsg accepts SCM_CREDENTIALS when they are the sender's own, as Linux
checks; GDBus sends them in every handshake and was refused with EINVAL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
SDL 3 has no OSS backend and SchOS has no ALSA kernel side, so sound now
goes SDL -> alsa-lib -> alsa-plugins' OSS plugin -> /dev/dsp. That path
found two bugs underneath it:
- ac97: resetting the PCM-out box also clears the descriptor list address,
and nothing set it again. Every stream after the first stop played a
"list" at physical address 0 -- silence -- and ALSA resets before each
stream. If the engine halts at the end of the queue, the run bit is set
again.
- /dev/dsp: SETFRAGMENT, GETFMTS, GETCAPS, SETTRIGGER, GETOPTR and GETODELAY
for the plugin's ring-and-pointer model, and poll(), writable once a whole
fragment fits (ALSA spun at 76% CPU otherwise). speaker-test now plays in
real time at 0% CPU, verified in a recording of QEMU's AC'97.
- /etc/asound.conf: the default device is a plug to the OSS device at 16-bit
stereo 48 kHz, what every SchOS audio driver plays.
Also:
- getstackpcs: each frame link must go up the same stack by less than
KSTACKSIZE. The chain ends at the syscall entry with the user's rbp,
which lbreakouthd uses as a register (-1024); the walk dereferenced it
under the syscall tracer and the kernel panicked inside acquire().
- fb: FBIOGET_VSCREENINFO reports nominal timings, as Linux's efifb does,
instead of zeros, which Xorg's fbdev turned into a 0 Hz RandR mode.
- procdump (Ctrl-P) shows where runnable threads are in user space.
- World: lbreakouthd instead of lbreakout2 (its stk.c passes vsnprintf a
size of 511 plus the prefix length, and Alpine's fortified headers trap on
that), plus curl, alsa-lib and alsa-plugins.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
NetSurf (GTK 3) now starts under X and loads pages over HTTPS. Every icon
GTK draws goes gdk-pixbuf -> glycin -> a loader process -> a sealed memfd
-> GMappedFile, and each hop found something missing:
- mkaroot runs Alpine's package triggers in the root under bubblewrap.
--no-scripts had skipped them, so there was no MIME cache, pixbuf loader
list, compiled GSettings schemas, GIO module cache, font cache or busybox
applet links.
- /usr/bin/bwrap is a stand-in that parses bubblewrap's options and runs
the program with no sandbox: glycin starts its loaders only through bwrap,
and real bwrap needs namespaces. schos-base replaces bubblewrap for it.
- ioctl: FIOCLEX, FIONCLEX, FIONBIO and FIOASYNC on any descriptor (Rust's
std uses them; pipes and sockets answered ENOTTY).
- capget/capset: root has every capability, others none.
- socketpair accepts SOCK_DGRAM and SOCK_SEQPACKET, carried as a stream.
- waitpid and setpgid match children against the thread group leader, so a
thread can wait for the process it spawned (ECHILD before).
- memfd: fstat reports the ftruncate length, not the page-rounded one; file
seals (F_ADD_SEALS, F_GET_SEALS, MFD_ALLOW_SEALING) are recorded and
enforced on later writes, truncation and writable mappings; MFD_CLOEXEC
is honoured; read-only MAP_PRIVATE maps are allowed.
- recvfrom honours O_NONBLOCK and MSG_DONTWAIT. musl's resolver reads its
socket until EAGAIN and blocked for ever after the first DNS answer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
A thread is a struct proc that shares three counted objects with others of
its group: the address space (struct mm: page tables, heap top, VMAs and a
lock for changing them), the descriptor table, and the signal dispositions.
clone() shares what its flags say and fork() copies.
- clone(): pthread_create's shape (VM, FILES, SIGHAND, THREAD, SETTLS,
PARENT_SETTID, CHILD_CLEARTID) and posix_spawn's (VM, VFORK, a stack).
- futex: WAIT, WAIT_BITSET with timeouts, WAKE, REQUEUE, CMP_REQUEUE, keyed
by the word's kernel address so shared pages meet. set_tid_address keeps
the word that exit zeroes and wakes, for pthread_join.
- exit ends a thread; exit_group, a fatal signal, or the leader exiting ends
them all. reapd frees exited threads; the leader is reaped by its parent
once the rest are gone. getpid is the group, gettid the thread.
- Stops and resumes reach every thread; other process signals the leader.
- exec kills the other threads and unshares the dispositions.
- No TLB shootdown, so pages unmapped from a shared address space are freed
only once every CPU has reloaded CR3 or is idle.
- procfs: /proc lists processes, task/ lists threads, comm, Threads:, Tgid.
- The console honours VMIN 0 / VTIME (btop's input drain hung on it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
- SIGSTOP/SIGTSTP/SIGTTIN/SIGTTOU stop, SIGCONT resumes; the parent gets
SIGCHLD and wait4 reports WUNTRACED/WCONTINUED; ps shows T. Ctrl-Z works,
and mc no longer hangs waiting for its subshell to stop.
- Blocking reads (console, pty, pipe) and sleeps take a pending stop and
carry on after SIGCONT; a caught signal without SA_RESTART ends them
with EINTR.
- nanosleep reads tv_nsec (sleep 0.5 used to return at once), writes the
remainder, and clock_nanosleep understands TIMER_ABSTIME.
- rt_sigaction uses the k_sigaction layout for Linux-ABI processes: the old
action's restorer was written 112 bytes past the caller's struct. Flags
are kept; SIGKILL and SIGSTOP cannot be caught.
- F1..F12 reach programs, as the Linux console sends them (PS/2, USB, I2C).
- TIOCLINUX subcode 6 answers "no modifiers" instead of echoing the 6 back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
- /dev/ptmx and /dev/pts/N: Unix98 pairs with a full line discipline,
window sizes, job control and hangup (kernel/dev/pty.c).
- The console speaks scroll regions, insert/delete line, SU/SD, RI/IND/NEL,
DECSC/DECRC; swallows charset designations and private CSI sequences;
and LF only returns the carriage under ONLCR.
- setsid() drops the controlling terminal, so a pane's pty becomes its ctty.
- pipe2() honours O_NONBLOCK and O_CLOEXEC (libevent's signal pipe).
- File modes are stored and enforced: chmod, fchmod(at), umask, creation
modes; /tmp is 1777.
- /proc/stat has real user/system/idle; /proc/<pid>/task; kthread flag.
- SO_PEERCRED, IOV_MAX 1024.
- /proc/strace: name a program and its syscalls go to the kernel log.
- World gains htop, btop, tmux, mc, ncdu, fastfetch, games, X toys, NetSurf.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The third micro driver: xhci.c with everything but finding a keyboard and
reading it taken out. It does not take over the live driver's state --
the kernel may have died inside that driver -- so each controller is
halted, reset and enumerated from nothing. Of the live driver it uses
the register mapping and the scratchpad pages the controller was lent
(DCBAA entry 0, read before the reset).
Root ports, and USB 2 hubs up to two deep (power, reset, route string,
transaction translator for a slow device behind a high-speed hub). A
boot-protocol keyboard interface gets Set Configuration, Set Protocol
boot, Set Idle, one interrupt IN endpoint and a Normal TRB, re-queued
after every report. No interrupts, no hot-plug, nothing that is not a
keyboard or a hub. A static 256 KB pool instead of the DMA allocator.
Checked under QEMU with the PS/2 controller switched off (i8042=off): a
USB keyboard on a root port, and one behind a hub, both type into the
GMMOS terminal. QEMU's hub is full speed, so the transaction-translator
path is not exercised.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The second micro driver: i2c_hid.c with everything but reading a
keyboard's input reports taken out. No ACPI -- AML cannot run on a dead
kernel -- so the live driver hands over what it found at boot
(i2c_hid_keyboards): the DesignWare controller, the address, the report
size, the AMD GPIO pin if there is one, and the parsed report descriptor.
No power commands, no reset, a read-only transfer.
usb_hid.c's report-protocol rewrite is split out as hid_boot_report(),
which does nothing but rewrite, and kernel/gmmos/hidkeys.c turns boot
reports into keys for this and the USB micro drivers to come.
GMMOS now probes every micro driver and polls all that answer.
Not run: QEMU has no DesignWare I2C, and the laptops at hand have PS/2
keyboards.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
A panic no longer ends in a picture. The report is drawn as before, and
then GMMOS runs under it: the real kernel stays dead -- the other
processors are halted, and nothing of it is called that locks, sleeps,
allocates or waits for an interrupt -- and GMMOS keeps its own clock
(the TSC), its own keyboard (micro drivers, polled), and the screen.
On the report: a live status line counting down the three-minute
power-off, which any key cancels, and the keys.
Space the last 300 lines of this boot's log as QR codes, a page per
symbol, numbered; + and - trade module size for capacity
L the log on screen, scrolled
T a terminal: why, log, grep, ps, cpus, pci, mem (page tables
walked first, so a bad address cannot fault), uptime, restart,
poweroff
R R restart; P P power off -- twice, so a stray key does neither
The first micro driver is PS/2, polled: kbd.c with everything but the
keys taken out. The probe asks the keyboard to echo, so a controller
with nothing behind it is not offered as one. Polling also sidesteps the
IRQ 1 polarity quirk, which is about interrupt routing.
A panic inside GMMOS (or a second one in the report) is reported and
then only blinks; it does not re-enter GMMOS.
Checked under QEMU: every screen; two QR pages read off a screenshot
with zbar decode to the log text exactly; restart reboots; left alone it
still powers off at three minutes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
A panic used to stop only the processor it happened on. The rest carried
on with a dead kernel: on the ASUS laptop the report flashed up and was
drawn over, and the fans stayed loud until the power button was held.
Now the panicking processor sends every other one an NMI, which arrives
even with interrupts off, and trap() halts a processor that takes one
while panic_stop is set -- first thing, before the canary check, since
that stack may be what broke. NMI gets its own per-CPU stack (IST 1):
for a few instructions at the top of syscall_entry the live stack is the
user's, at ring 0, and a fault pushing the frame there would be a double
fault on the same stack and a reset instead of a report.
A second processor that panics while one is already reporting halts
instead of drawing over it; the owner's own nested panic still gets
through.
Checked under QEMU with -smp 4: after a sysrq crash CPUs 1-3 sit in hlt
with IF clear and CPU 0 is in the report's blink loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
PSOGM mode will put the kernel log on screen as QR codes, a page per
symbol, and version 6 held 134 bytes. Version 40 at level L holds 2,953.
What grew: blocks of two lengths and the interleave that steps around
them, the alignment-pattern grid, the version-information blocks from
version 7, the 16-bit character count from version 10. The per-version
table is down to the two columns that are genuinely transcription (EC
codewords per block, block count); total codewords come from the
geometry.
Checked against segno module for module at every version (exact-fill
payloads), and 120 symbols across all 40 versions decode with zbar.
OpenCV's detector cannot find symbols above about version 24 at all,
segno's included, so qrcheck reports those as the detector's limit.
The crash card stays a version-6 symbol (QR_CARD_BYTES), so a phone still
reads it from across the desk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The PSOGM on the ASUS TUF A15 was a page fault in cprintf, from probe(),
in the touchpad driver's own success message. cprintf had no field widths:
"%04x" printed literally and consumed no argument, so the "%s" after it
was handed the product ID as a string pointer. "%lx" misprinted the same
way -- "0x4275838976x" for 0xFEDC2000 -- on the line before.
The driver's formats are fixed, and cprintf now steps over flags and
widths and takes l/ll/z as 64-bit, so a directive it does not render can
no longer shift every argument after it. Until now any %ld or %lu printed
the number followed by a stray letter.
The touchpad on/off entry in the boot menu has served its purpose and is
gone; the verbose step trace stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The touchpad driver crashed the ASUS TUF A15 at boot. Its thread runs the
firmware's AML -- _DSM, _PS0, _CRS -- through uACPI at -O0, on an 8 KB
kernel stack, and kernel stacks are one array: running off the end lands
in the next thread's stack, and the machine dies a moment later in some
other code. The thread now runs on a 64 KB stack of its own, through
SCFF's call_on_stack().
And a crashed laptop sat with its fans up until somebody held the power
button, since the other processors keep running. On an ordinary boot the
PSOGM now says it will power off, and does, after three minutes: SLP_TYP
from \_S5, read at boot, written straight to PM1 control with no AML, which
could sleep or wait on a lock a dead processor holds. A verbose boot keeps
the screen up for ever.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The ASUS TUF A15 freezes at the default resolution shortly after the
loader hands over -- screen dark, Caps Lock dead -- and it is the only
machine here with an I2C-HID touchpad, which the driver added in the same
release now probes at boot. "Touchpad driver: on/off" in the F8 menu
answers whether it is the cause on the machine itself, through a new
SCHBOOT_OFF_FLAGS byte the kernel checks before starting the driver.
A verbose boot now prints each step of the probe before taking it, so if it
is the cause, the last line on the screen says which step.
Also: S in the menu wrapped at five entries whatever the count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
A Linux module is built with -mcmodel=kernel and can only reach addresses
in the top 2 GB, where this kernel is not linked. So the kernel image is
mapped a second time at LDLS_KALIAS, with a vmemmap area and a module area
beside it, in one PDPT shared by every address space. Nothing loads a
module yet; this is the address-space groundwork, set up at every boot,
and include/ldls/ is the interface the loader will use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
A laptop's touchpad is on the chipset's I2C bus, found only through ACPI
(PNP0C50 / ACPI0C50), and SchOS had no I2C at all, so the touchpad of
every recent laptop did nothing.
kernel/acpi/i2c_hid.c drives the DesignWare I2C controller every x86
chipset uses (AMDI0010 on Ryzen) by polling, speaks HID over I2C to the
device the _DSM points at, and feeds the reports through the USB HID
parser. On AMD the interrupt pin's level is read every tick, so a report
is read exactly when one is waiting; elsewhere the input register is polled.
The touchpad is driven in mouse mode, which it starts in after a reset:
motion, clicks and taps become /dev/input/event1 like any mouse. The HID
parser now prefers a descriptor's relative pointer over an absolute one
for this, and takes descriptors from transports other than USB.
Untested on hardware: QEMU emulates no I2C touchpad.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
SCFF, the SchOS Compressed File Format (include/fs/scff.h), is a block
image cut into 128 KB chunks, each its own zstd frame, behind an index.
tools/mkscff writes it from fs-ram.img on every core (-19, 11 s) and
checks each chunk decompresses to itself. The kernel carries the .scff
as its ramdisk and unpacks a chunk the first time a block in it is
read; zero blocks share one page. The kernel and the ISO are the
compressed size, and the root costs memory only for what is touched.
See docs/architecture/scff.md.
zstd 1.5.7 comes from ports/zstd like uACPI: the decoder is compiled
into the kernel at -O2, with a static context and a 64 KB stack of its
own, and mkscff builds the whole library from the same release.
world now has xorg-server, the fbdev and evdev drivers, xinit, Window
Maker, xterm and DejaVu, and /root/.xinitrc runs wmaker. That root is
358 MB, 102 MB as SCFF.
The ISO no longer carries the root a third time as an ISO 9660 tree,
which nothing read. schos.iso: 1389 MB -> 318 MB. El Torito keeps its
own copy of the EFI image, the layout real machines have booted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
busybox wget hands TLS to ssl_client over a socketpair and then does
shutdown(SHUT_WR). That cut the AF_UNIX link both ways, so ssl_client's
reply was a SIGPIPE and every https:// download hung. SHUT_WR is now a
half-close: the peer reads EOF and can still answer. TCP sockets get
shutdown() at all (tcp_shutdown for the FIN); it used to do nothing.
- exec keeps ignored signals and the signal mask, as execve(2) says.
- /proc/<pid>/fd: a link per descriptor -- the path it was opened by,
socket:[n], pipe:[n], anon_inode:[eventpoll]. /proc/self too. The
global inode bit moves above pid << 8; at 0x10000 it was /proc/256.
- fstat on a socket or pipe answers S_IFSOCK / S_IFIFO instead of EINVAL.
- poll, select and epoll wake as soon as a pipe, socket or input device
changes, not on the next tick.
- Pipes are 64 KB of lazily allocated pages, copied in blocks, with
PIPE_BUF atomicity: 300 MB through `yes | head | wc` in 7 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Xorg finds its VT through /dev/tty0, and without one ran on none: the
console went on drawing into the framebuffer over the X screen. tty0 is
the terminal on screen, as on Linux. FBIOPUTCMAP succeeds, as it does on
a true-colour Linux framebuffer, instead of 256 logged errors per start.
schos-base gives root a .xserverrc with -dumbSched, Xorg's switch for
input on the main loop: SchOS has no threads, and Xorg crashed in
pthread_join on its input thread when the first client left. It adds
the hostname to /etc/hosts, so xauth can resolve schos:0.
zsh loses PROMPT_SP: on a serial terminal narrower than the console its
padding wrapped and left a # above every prompt. bootcheck knows zsh's
prompt and matches without colour codes, so busybox's ls reads as text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
alarm() and setitimer() stored a countdown nothing counted down, so no
timer has ever fired; setitimer and getitimer were also registered with
no Linux number. alarmd now posts SIGALRM on the tick, while any process
has a timer armed. busybox's ping, /bin/ping on the Alpine root, sends
every request after the first from its SIGALRM handler.
It also opens SOCK_RAW, which was EPROTOTYPE. A raw ICMP socket is now a
ping socket whose reads start at the IP header. And a blocked socket
call gives up for a signal with a handler, not only for a kill: the
alarm woke recvfrom, and the wait put it straight back to sleep.
For Xorg: AF_UNIX abstract names, which read as the empty path and so as
EADDRINUSE ("server already running"); and getsockname and getpeername,
which did not exist, so libxcb sent no cookie and the server refused
every client.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The live root was a fixed 96 MB image in the kernel: 60 MB of zeros on
the ISO, twice, and room for 60 MB of packages whatever the machine had.
Now the image is only what the root holds, plus slack, measured by
building it once large. Past its end the ramdisk goes on to half of the
memory free at mount, as pages taken the first time each block is
written; an unwritten block reads as zeros and costs nothing. SchFS
keeps no free-space map on disk, so growing a volume is a larger total
before open builds the map: grow_to, set for the ramdisk root.
8 GB machine: a 4 GB root, Xorg installed into it in 77 s with 7.6 GB
still free. The ISO is 172 MB instead of 344.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Found by running Alpine's apk on SchOS, one failure at a time:
- chroot(2) was a stub returning EPERM. Each process now has a root:
where an absolute path starts and where .. stops. Mounts remember
whose root they were made under, and a walk leaves a mount by the way
it came in, so one filesystem can be mounted twice.
- devtmpfs and proc mounted only on /dev and /proc, whatever the target;
a chroot got "already mounted".
- mmap never reused freed address space, so musl's malloc used up the
256 mapping records while 780 MB were free. A mergeable mapping now
goes straight after an anonymous one whose end has room.
- unlinkat returned -1 (EPERM) where apk expects ENOENT, and renameat
was an old copy of rename: no replacing the target, and v1 dirents
written into SchFS. Both now share rename's implementation.
- execve runs #! scripts, and says ENOEXEC for what it cannot run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
There were none: fcntl answered F_SETLK with EINVAL and flock was not a
system call. Alpine's apk, which runs unmodified on SchOS through
Alpine's own musl, locks its database before reading it and stopped
there.
kernel/fs/lock.c keeps one table of advisory locks keyed by (dev, inum):
flock() for the whole file, owned by the open file description;
F_SETLK/F_SETLKW/F_GETLK for byte ranges, owned by the process and
released when it closes any descriptor on the file or exits; and the
F_OFD_* forms, ranges owned by the description. flock and record locks
do not see each other, as on Linux. Waiters sleep until any release and
are interrupted by a signal.
cmd/locktest checks each between a parent and a child, including range
splitting, F_GETLK's report, and a blocked waiter being woken.
shell.nix gains pkg-config, meson, ninja, m4, bison, flex and xz, for
the X ports.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Xorg on a framebuffer -- the fbdev video driver, the evdev input driver,
libpciaccess -- asks the kernel a fixed set of questions before it draws
anything, and gives up on the first wrong answer. These are those
answers.
evdev: EVIOCGVERSION, GID, GNAME, GPHYS, GUNIQ, GPROP, GBIT, GKEY, GABS,
GREP and the accepted setters. Xorg and libinput decide what a device
*is* from the capability bitmaps; /dev/input/eventN answered only
EVIOCGRAB, which reads as no device at all. Each device's bitmaps are
its defaults plus whatever it has reported, so a USB tablet makes the
pointer absolute.
fbdev: FBIOPUT_VSCREENINFO succeeds for the mode already set, as on
Linux -- the fbdev driver sets it every time it starts -- and still
refuses any other. FBIOPAN_DISPLAY to the origin; FBIOBLANK.
The console: KDSETMODE(KD_GRAPHICS) stops it drawing on a terminal,
KDSKBMODE(K_OFF) stops keys reaching its tty, and VT_PROCESS now does
the switch handshake: leaving the terminal sends relsig and waits for
VT_RELDISP, arriving sends acqsig. A terminal whose owner has died goes
back to the kernel whole, so a crashed X cannot leave the console dead.
/sys: boot_vga, a writable enable, and graphics/fb0 under the display
device, which is how the fbdev driver pairs a card with /dev/fb0.
ports/linux-headers: <linux/*.h> into musl's prefix, from sabotage-
linux's kernel-headers 4.19.88-2. Its checksum is recorded from the
first download; upstream publishes none.
cmd/xready makes each call and checks the answer, including the switch
handshake on tty2 and an owner that dies holding it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
An ASUS TUF A15 booted with its internal keyboard dead and a USB one
fine. These AMD laptops' firmware describes IRQ 1's polarity wrongly --
Linux keeps a quirk list -- and an edge line programmed the wrong way
up never fires: the controller holds its byte, and only the interrupt
that never comes would read it.
irq_watch() lets a driver say how to ask its device whether something
is waiting. The poller asks every tick; 50 ms of waiting with nothing
delivered turns the line's polarity over and drains the device, which
re-arms the edge, and if it still says nothing the line is polled.
Both are announced. The keyboard and the PS/2 mouse are watched.
ISA lines now also take their mode from the MADT's override entries,
which were parsed and never read.
Tested in QEMU, which ignores polarity on edge lines, with the keyboard
line masked: the first key turns it over and typing works; masked again
after the flip, it is polled and typing still works.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The set libwayland's event loop is made of, in kernel/sys/sys_event.c:
four kinds of descriptor with no inode, FD_EVENT, that read() drains
and poll() reports on. They were table entries returning ENOSYS that
read as done.
epoll registers (descriptor, file) pairs, so a closed descriptor
leaves the set; level- and edge-triggered, EPOLLONESHOT. Waiting is
poll()'s, a tick at a time. The old eventfd and signalfd numbers (284,
282) were aliased to the new calls and read flags from a garbage
register; they are their own entries now, with epoll_create and
epoll_pwait.
cmd/evtest checks each, then all four in one set. The plans are
brought up to date: everything Wayland was waiting on is built except
setsockopt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
sigsend() ended a process for a default-fatal signal (SIGUSR1, SIGTERM,
SIGINT...) on arrival, whatever its signal mask said. Blocking is
exactly the promise that it will not: the signal waits until it is
unblocked, or until the program takes it some other way -- which is
what signalfd is, and how this was found.
A blocked signal is now only made pending. If it is later unblocked
while still pending, deliver_signals() applies the default action
then. SIGKILL cannot be blocked, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
From 1 MB the 34 MB kernel ran across 8 MB, where OVMF keeps ACPI NVS
memory that outlives the firmware -- so it was overwritten on every
boot, after ExitBootServices. Firmware leaves its leftovers low; above
16 MB is where a machine is most reliably empty.
KERNPHYS in memlayout.h, and kernel.ld agreeing with it. Nothing else
named the old address. Under OVMF the range is now only boot-services
memory: staged, copied home after the firmware exits, no warning. Boots
as a CD and as a USB disk, 1 and 4 CPUs.
The 15 MB below the kernel is not given to the page allocator yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
- schinit, schinitd and vgpud build every message from pieces, one
write() each, so a job starting on another CPU landed mid-line:
"schinitd: starting vgpud: os.schos.resolvconfno virtio-gpu on this
machine". They now collect a line and write it at the newline;
resolvconf's verbose line is one write with its prefix.
- The ACPI SCI registers IRQ_QUIET. A desktop's SCI never fires, and the
poller took two seconds of silence for a misrouted line ("irq 9:
nothing has arrived on it") and called the handler every tick. A line
is only exempt while every handler on it is quiet.
- The loader claims each segment from where the last one's claim ended,
so two segments sharing a page no longer ask for it twice. When a
claim is still refused, it names the memory-map entries in the way.
- Stale divesymlink() declaration gone; the kernel.md struct table
re-measured (inode, buf and file pools grow from slabs now).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Sixty-five headers sat side by side in include/, so `#include "irq.h"`
said nothing about where irq.h was or what it belonged to, and errno.h,
stat.h and fcntl.h at the top shadowed the system's for any host tool
built with -I./include. They are in folders now -- arch/ core/ fs/
dev/ gfx/ net/ uapi/ (and ldls/ for the Linux driver layer) -- and
every include names the folder, as Linux's do: "core/proc.h".
Done mechanically and checked the hard way: the kernel built from this
tree disassembles identically to the one built from the tree before
it. The full image boots, and userland is the same set of programs.
Paths in docs and comments follow; docs/guides/layout.md has a table
of what is where, and tools/fix-includes.py rewrites old-style
includes from the folders in the tree, for code written before this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Nothing ever saved the FPU and SSE registers on a context switch.
musl's memcpy, the compiler's struct copies and any arithmetic on
doubles keep live values in %xmm, so two processes sharing a CPU wrote
over each other's: two shells counting in a loop on one processor took
a NULL+8 page fault within seconds, at a different rip every time. It
reproduces on kernels from before this week too -- it had always been
there, and every crash nobody could explain was a candidate.
sched() now fxsaves the process leaving the CPU and scheduler()
fxrstors the one arriving. A new process starts from the ABI's state
(FCW 0x37F, MXCSR 0x1F80), fork copies the parent's live registers,
exec resets them, and a signal handler's are put back by rt_sigreturn
so the interrupted code finds what it had.
The kernel was free to use %xmm too -- GCC vectorised struct copies
and memset into 153 instructions of it -- so an interrupt could
clobber the registers of the program it interrupted with no switch at
all. Kernel, lwIP and uACPI objects are built -mgeneral-regs-only now
and the image has none; cmd/ keeps SSE.
Checked under QEMU: three concurrent loops three times over, on 1 CPU
and on 4, no faults; before, every run faulted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The scheduler was xv6's round-robin: run everything RUNNABLE in slot
order and yield on every timer tick. Slot order is not fairness, a
process alone on a CPU paid a full context switch a hundred times a
second to be handed straight back to itself, and there was no way to
say that one thing mattered more than another.
Every process now carries vruntime, the CPU time it has used divided
by its weight, and the scheduler runs the runnable process with the
smallest. Fairness and interactivity both fall out of that one rule;
nice is a weight, 1.25x per level as UNIX has always had it. A slice
is 20 ms shared among the runnable processes, never below 2 ms, and
the timer tick preempts only once it is spent. A process waking from
a long sleep is brought up to min_vruntime less one period, so it is
scheduled promptly without being owed everything it slept through;
fork inherits vruntime, so forking does not reset a debt.
getpriority/setpriority are real, with Linux's offset of 20 on the
return; /proc/<pid>/schedstat and the ctxt_switches lines of status
report what the scheduler did. docs/architecture/scheduler.md has the
reasoning, including why the run queue is still a scan of ptable.
This was written in an earlier session and left uncommitted. Finished
here: a signal waking a sleeper goes through the same vruntime floor
as wakeup() does, and sched_yield() yields -- it returned 0 doing
nothing, harmless while every tick was a yield and a spin of a whole
slice once ticks stopped being one.
Checked under QEMU on 1 and 4 CPUs: a nice 10 loop beside a nice 0
one gets about a tenth of a shared CPU, and a command typed meanwhile
answers in 26 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Every page of RAM went onto the free list at boot, which means writing
each one -- a link, and kfree()'s 4 KB of junk -- before the first
process ran: 64 GB of memset on a 64 GB machine to say it was free.
Memory nobody has used yet is kept as a cursor and an end per region
now, and kalloc() takes from those once the list of given-back pages
is empty. A page is first touched by whoever asked for it.
That makes the cap on RAM cheap to raise, and PHYSTOP_MAX goes from 64
to 256 GB, which still leaves 248 GB of the kernel PDPT for device
windows. MEMREGION_MAX goes from 32 to 64 for the firmware maps that
cut RAM into many pieces.
kalloc_free_bytes() walked the whole free list under the allocator's
lock -- two million links on 8 GB, every second top or fastfetch was
running, with every CPU that wanted a page waiting behind it. It reads
a counter now. And the buffer cache, which keeps what it grows to, is
reported as Buffers in /proc/meminfo and sysinfo(2) rather than as
memory used by nothing.
Checked under QEMU at 1, 2 and 6 GB: MemFree right, zsh splitting
200000 words, fork loops, a 74 MB write.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The fixed tables that a bigger machine than the one they were written
on reaches first, each raised to where it costs little:
NPCI 64 -> 256 a desktop with cards and Thunderbolt passes 64,
and the devices past it -- often the disk or
NIC last in bus order -- were ignored; 44 KB
NSOCK 32 -> 128 Unix sockets, which a desktop session uses by
the dozen; 4.9 KB each, 470 KB in all
NDEVICE 32 -> 128 120 bytes each
NIFDEV 16 -> 64 one dock is a hub, Ethernet, audio and a card
reader at two or three interfaces apiece
NETIF_MAX 4 -> 8
Device names took one digit and clamped there, so the tenth device of
a kind and every one after it was named "...9". Two digits now.
Checked under QEMU with two bridges of test devices: 68 functions,
all in lspci, /proc/pci and /sys/bus/pci.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
NCPU was 16, under what a desktop has today. 64 costs 48 more TSS
I/O bitmaps and scheduler stacks, about 800 KB of BSS. Past 254 the
APIC would need x2APIC mode, which is a separate change.
With more than 16 there were two other ceilings. sched_getaffinity
wrote "CPU 0" and returned 0, and musl clears every byte past the
count returned -- so the mask came back empty and nproc, make -j and
sysconf(_SC_NPROCESSORS_ONLN) all said 1, on any machine. It returns
the mask of processors that started, and its size, now. And /proc
rendered every file into 2 KB, which /proc/cpuinfo ran out of at the
eighteenth processor without a word; /proc/pci, /proc/interrupts and
/proc/mounts were each one bigger machine from the same cut. There is
one 64 KB buffer for it now behind a sleeplock, since there is no
allocator for contiguous pages, and the generators that write raw
are given the real capacity instead of a constant.
Checked under QEMU with -smp 24: nproc 24, /proc/cpuinfo whole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The inode table was NINODE (200) entries, searched end to end on every
iget(), and a panic -- "iget: no inodes" -- when all of them were held.
Held means open, a cwd, a running binary or a directory mid-walk, so a
few busy processes reached it. iget() now finds an inode through a hash
on (dev, inum), takes a free one from a list, and makes more from a
slab cache once the NINODE in the image are all in use.
The open-file table had the same shape, NFILE (512) and then ENFILE,
and gets the same treatment: a free list, and the slab past NFILE.
/proc/fsstat's peaks now read against how many exist.
getrlimit(RLIMIT_NOFILE) said unlimited, which musl turns into
sysconf(_SC_OPEN_MAX) == -1, after which zsh believed it had no
descriptors and `exec {fd}<file` failed on the first one. It reports
NOFILE now. And a comment in sys_fs.c held a "*/" that ended it early.
Checked under QEMU: six processes holding 115 files each, 713 open
descriptions and 341 inodes at once, all back to the baseline after.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The cache was NBUF buffers, 1 MB, on every machine: enough for one with
tens of megabytes and nothing on one with gigabytes, which re-read the
same directory and binary blocks off the disk for every command. It
still starts as those 256 in the kernel image, and a miss with every
buffer busy now makes a new one rather than evicting, up to 1/32 of RAM
or 256 MB. Growing on demand means nothing is spent that is not used,
and binit() needs nothing from the page allocator.
Lookups go through a hash on (dev, blockno) instead of walking the LRU
list, and bflush() walks a creation-order list with an unlocked filter
first, so neither costs more at 65536 buffers than it did at 256.
struct buf's data is a pointer to its own page now; the drivers copy
through their own DMA buffers, so where it sits does not matter.
On a 2 GB QEMU guest: a 40 MB file read back in 0.89 s instead of 1.83,
the big binaries in 0.17 s instead of 0.26. /proc/fsstat shows the
cache as buf_cached now / most.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
exec took 32 arguments and 64 environment variables, in fixed arrays,
so a glob over more than 31 files failed with E2BIG. It now reads the
caller's argv and envp where they are, through the uaccess helpers and
a bounce page -- a second thread rewriting the array after a check
cannot slip a kernel address in -- and sizes the new stack to fit
them. The limits are Linux's: ARG_MAX, 2 MB of strings and pointers,
and 128 KB for any one string (USER_STR_MAX follows it).
Every mmap took one of a process's 256 VMA slots, and zsh takes one per
16 KB heap block, so `x=($(<file))` over 30000 words ran out after 4 MB
of heap and exited 1 without a word. Neighbouring anonymous mappings
now share a record, as Linux merges them -- the bump allocator puts
each new one where the last ended -- and munmap trims or splits it.
Partial unmaps of device or segment mappings are refused with EINVAL
instead of kfree()ing pages that are not the process's, and a failed
allocation half way through a mapping no longer leaks what it had.
Checked under QEMU: touch over 3000 names, /bin/echo with 50000
arguments, E2BIG past 2 MB, zsh splitting 100000 words, fork loops.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
hwreport writes one folder to the first read-write FAT mount, or mounts
the first USB stick that takes vfat itself and unmounts it afterwards:
summary.txt (machine, firmware, CPU, memory, every PCI and USB device
with its driver or "-- no driver"), dmesg.txt, lspci.txt in the shape of
lspci -nnk -xxx, lsusb.txt, dmi.txt, memmap.txt, the ACPI tables as raw
.dat files iasl -d reads, and copies of /proc. Serials, the UUID and the
MSDM/SLIC tables (a Windows licence key) are left out.
It reads /sys, which is new: sysfs at Linux's paths and in Linux's
formats -- /sys/bus/pci/devices with uevent, config and resource,
/sys/bus/usb/devices, /sys/firmware/acpi/tables, dmi/tables, memmap
and efi, /sys/class/dmi/id. toybox's lspci and lsusb work unmodified
against it. The USB core now keeps a table of attached devices for it.
The machine's name comes from SMBIOS (kernel/dev/dmi.c). The UEFI loader
hands over the entry point from the configuration table, the kernel
falls back to the 0xF0000 scan, and the log gets Linux's "DMI:" line.
Two bugs found on the way:
- The loader handed over at most 40 memory-map entries, in firmware
order. A laptop's UEFI map is 60-150 descriptors with RAM above 4 GB
listed last, so that is what was dropped. The entries now have their
own area at 0x31000 with room for 256, are sorted before merging, and
the kernel's 32 usable regions keep the largest when there are more.
- MemTotal and sysinfo's totalram were PHYSTOP, an address, which counts
the PCI hole: a 6 GB machine reported 8. Now the usable RAM, summed.
usb.ids moves to /usr/share/hwdata, where lsusb looks for it, and
pci.ids joins it (`make pci-ids`, BSD-3-Clause like usb.ids).
Checked under QEMU q35: the report written to a FAT32 stick, fsck.fat
clean, DSDT.dat disassembled by iasl on the host, lspci -k and lsusb
showing names, 6 GB of RAM seen as 6137 MB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
NBLKDEV was 16 for every disk and partition together, which a laptop's
NVMe drive with its eight partitions and a USB stick come close to. The
mount table held 8, SchFS 4 volumes and 4 snapshots, FAT 4 volumes.
Now 32, 32, 16, 8 and 8; the device numbers still fit between the ones
already fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Every path component was copied into a DIRSIZ buffer and every path
into a MAXPATH one, so names were cut at 29 bytes and paths at 127
without an error. Two names sharing their first 29 bytes opened the
same file, on SchFS and FAT alike, though both hold 255.
VFS_NAME_MAX (255) and VFS_PATH_MAX (4096) are the limits now, and
anything longer is ENAMETOOLONG. namex_from() takes its path buffers
from kalloc(), a page each, rather than putting two of them on an 8 KB
kernel stack. The v1 format still stores DIRSIZ bytes, and refuses a
longer name instead of matching on its first 30.
Checked: 255-byte names on SchFS and FAT (fsck.fat clean, and the FAT
name answers to its uppercase form), 256 refused, a 200-byte path and a
link to it, and no pages lost over 700 lookups through links.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
kd_write() went through bread(), so every block a write allocated was
read from the disk first and then replaced whole. That was a quarter of
the disk operations of a SchFS write. bgetblk() is bread() without the
read, as Linux's getblk() is.
1 MB on AHCI under QEMU: 2.0 -> 2.8 MB/s in 4 KB writes, 4.5 -> 5.6
MB/s in 64 KB ones. 3 MB of random data written and copied through the
cache's evictions reads back with the same md5.
The 63 KB/s seen earlier is the legacy IDE driver on QEMU's default
machine, at about 10 ms per emulated PIO write; the same disk on AHCI
(q35) is 40 times faster.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Symlinks are followed in namex_from() now, in the middle of a path as
well as at the end, and a relative target resolves from the directory
that holds the link rather than from the caller's cwd. `ln -s f d1/s;
cat d1/s` said "Symbolic link loop" because it looked for ./f. A loop is
ELOOP after 40 links, a dangling link ENOENT, and open(O_CREAT) through
a link to a file opens the file. divesymlink() is gone.
mknod from a Linux program passes (mode, dev) where the native call
passes (major, minor), and was read as the native one: `mknod n c 1 2`
made node 432,258, and mkfifo made a character device. Both are decoded
now; a FIFO is EPERM, and an existing name is EEXIST.
/proc/mounts listed devtmpfs twice: once from a fixed line and once
from the mount table. The fixed line is gone, and mount_add() refuses
a filesystem mounted on its own root, which is where a second devtmpfs
mount lands. A read-only FAT mount says ro.
/proc/partitions exists, in Linux's format, and /proc/filesystems lists
vfat.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The filesystem every other system can read: a USB stick, an SD card, the
EFI system partition. It is here first for the hardware report, which has
to leave a machine on something that can be read on another one.
mount -t vfat /dev/usb0p1 /mnt (msdos and fat work too; -o ro)
Written from Microsoft's specification, and matched to Linux vfat where
the specification leaves a choice: 8.3 names with the NT lowercase bits,
long-name entries otherwise, Linux's alias rule (REPORTS, then BIGNUM~1),
case-insensitive lookup, UTC times, the boot-sector dirty bit, every FAT
copy and FSInfo kept up to date. It uses its own sector cache over the
new blkdev_xfer, since a partition need not be a whole number of 4 KB
blocks, and every operation that changes something reaches the disk
before it returns. Inode numbers come from the entry position, or the
first cluster for a directory, plus a small table for entries that moved.
Around it:
- /dev lists every disk and partition the block layer found (major 8,
minor = block device), and raw reads and writes on them go by sector.
- The ESP and MBR FAT partitions are registered, typed so the root probe
passes over them. MBR entries with a bad status byte are skipped, so a
superfloppy's boot code is not read as a partition table.
- statfs, sync, fsync, umount (EBUSY while in use), shutdown, reboot and
the power button all know about FAT.
- create undoes and reports a failed ialloc or dirlink (ENOSPC, EINVAL,
EPERM) instead of panicking; fs_ops gains refuse_types and no_hardlinks.
- filewrite returns a short write instead of panicking on it.
- utimensat is implemented. As a stub returning 0 it made toybox touch
believe the file existed, so `touch newfile` created nothing on any
filesystem.
Tested in QEMU against mkfs.vfat images (FAT12 floppy, FAT16 on MBR,
FAT32 superfloppy and GPT ESP) by writing, renaming, deleting, filling to
ENOSPC and truncating there, then checking with fsck.fat -n and mtools on
the host: all clean, contents match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
