The filesystem every other system can read: a USB stick, an SD card, the
EFI system partition. It is here first for the hardware report, which has
to leave a machine on something that can be read on another one.
mount -t vfat /dev/usb0p1 /mnt (msdos and fat work too; -o ro)
Written from Microsoft's specification, and matched to Linux vfat where
the specification leaves a choice: 8.3 names with the NT lowercase bits,
long-name entries otherwise, Linux's alias rule (REPORTS, then BIGNUM~1),
case-insensitive lookup, UTC times, the boot-sector dirty bit, every FAT
copy and FSInfo kept up to date. It uses its own sector cache over the
new blkdev_xfer, since a partition need not be a whole number of 4 KB
blocks, and every operation that changes something reaches the disk
before it returns. Inode numbers come from the entry position, or the
first cluster for a directory, plus a small table for entries that moved.
Around it:
- /dev lists every disk and partition the block layer found (major 8,
minor = block device), and raw reads and writes on them go by sector.
- The ESP and MBR FAT partitions are registered, typed so the root probe
passes over them. MBR entries with a bad status byte are skipped, so a
superfloppy's boot code is not read as a partition table.
- statfs, sync, fsync, umount (EBUSY while in use), shutdown, reboot and
the power button all know about FAT.
- create undoes and reports a failed ialloc or dirlink (ENOSPC, EINVAL,
EPERM) instead of panicking; fs_ops gains refuse_types and no_hardlinks.
- filewrite returns a short write instead of panicking on it.
- utimensat is implemented. As a stub returning 0 it made toybox touch
believe the file existed, so `touch newfile` created nothing on any
filesystem.
Tested in QEMU against mkfs.vfat images (FAT12 floppy, FAT16 on MBR,
FAT32 superfloppy and GPT ESP) by writing, renaming, deleting, filling to
ENOSPC and truncating there, then checking with fsck.fat -n and mtools on
the host: all clean, contents match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The firmware's AML is now interpreted. uACPI 6.1.1 (MIT) is fetched by
ports/uacpi, checksum-verified, and compiled into the kernel unmodified,
the same way lwIP is. kernel/acpi/host.c is its host layer: memory,
mapping, port and PCI config I/O, time, mutexes and events that spin
before the scheduler exists, the SCI, and an "acpi" thread for the
work the SCI defers.
PCI interrupts go where the board says. pci_init() now routes every
device's INTx through the root bridge's _PRT before drivers bind. It
follows link devices' _CRS, uses a bridge's own _PRT where the namespace
has one, and swizzles through bridges that don't. Before this, INTx
waited on the 8259's line number, which is the wrong pin in APIC mode.
irq_register() takes a trigger mode rather than a level/low flag,
because q35's links and most SCIs are level, active-high. The MADT's
interrupt source overrides are now parsed, and are what places the SCI.
The power button syncs the filesystems and powers off. shutdown() and
reboot() go through the firmware's S5 and reset register first, and
only then fall back to the emulators' ports, which a real board does
not answer.
Tested under QEMU: q35 with MSI off routes xHCI to GSI 22,
level/active-high, and it takes real interrupts with nothing polled.
system_powerdown powers off q35 and i440fx (QEMU exits 0), and q35
with 4 CPUs boots from NVMe with USB hot-plug working alongside.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Four Gate 0 rows, and a fifth found while checking one of them.
**getrusage() did not distinguish RUSAGE_CHILDREN from RUSAGE_SELF**, which
undersells it: it ignored `who` entirely and reported the machine's *uptime*
as the caller's user time. Every process of every age answered with the same
number. Per-process CPU time is sampled at the timer tick now and split on the
interrupted privilege level; children's time is rolled up in wait() rather than
exit(), because RUSAGE_CHILDREN means *reaped* children and a running one has
not contributed yet.
**And wait4()'s fourth argument is a `struct rusage *` that was read off the
stack and thrown away.** That is the one shells actually use -- wait3() is the
same syscall with pid -1 -- so zsh's `time` reported
16777216.01s user 1073.78s system 927983249% cpu
for every command. 2^24 seconds is uninitialised memory, and it did not vary
with the workload because it was never written. Now:
busy loop 2.66s user 97% cpu 2.720 total
sleep 2 0.02s user 0% cpu 2.248 total
ls -lR / 0.70s user 65% cpu 1.070 total
**ru_stime is a structural zero and says so.** MSR_SFMASK includes FL_IF, so
SYSCALL clears interrupts and no tick can land while a process is inside a
syscall. Tick sampling cannot see kernel time at all here. Charging it needs
TSC deltas closed and reopened around every sched(), which is scheduler
accounting rather than sampling; the limitation is written down in
docs/architecture/kernel.md rather than papered over.
**/proc/<pid>/exe is a symlink.** It also needed a real st_size, and every
other procfs file deliberately reports zero -- readlink(2) bounds its copy by
it, so a symlink of size 0 resolves to the empty string, which looks like it
worked and is worse than the regular file was. Generating that one path in
ilock() costs one small render per stat() of one file.
**OVMF memory reporting is closed**: 1 GB reports 1017 MB usable, 2 GB reports
2041 MB. The firmware keeps about 7 MB either way, which is the right shape.
**And `ps` printed a header and nothing else**, which is not in any list
because nobody had run it. `ps` with no arguments shows only processes on
*this* terminal; /proc/<pid>/stat hardcoded tty_nr to 0, so nothing could ever
match. `ps -e` always worked, which is exactly what hid it. p->ctty was already
tracked -- procfs simply was not asked. Fields 14..17 were hardcoded zero too,
so TIME read 00:00:00 however long a process had run; they carry the new
counters now, and a shell that has burned 653 ticks reports 00:00:06.
Verified: utime climbs 18 -> 653 across a loop in the shell itself, `ps` lists
its own terminal, `ps -e` still lists everything, `readlink /proc/1/exe` gives
/bin/schinit, and sigtest/$()/rename/dmesg are all still green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A timer interrupt that arrives while interrupts are disabled is not delayed,
it is lost -- the LAPIC in periodic mode holds one pending interrupt and drops
the rest. So anything the kernel does with interrupts off for longer than
10 ms makes `ticks` run slow, and it never catches up.
That has now presented twice as "uptime is wrong": once as an interrupt storm
taking 83% of the CPU, once as heavy console output on a display that is
expensive to draw to. Both times the tick was the messenger, and both times it
looked like a timekeeping bug.
monotonic() reads the TSC instead. It is a counter in the silicon that
advances whether or not this kernel is paying attention, it is already
measured against the PIT at boot, and reading it is one instruction and no
lock. wallclock(), /proc/uptime, sysinfo, getrusage and times() all go through
it now.
`ticks` keeps the job it is good at -- the scheduler preempts on it, sleep()
counts it -- where losing one means a slightly longer sleep rather than a
wrong answer about what time it is.
Lost ticks are no longer harmful, which makes them invisible, which is worse.
So /proc/interrupts now says
timer: 3383 ticks taken, 3387 expected
and names the gap when it grows, because a machine dropping timer interrupts
is spending too long with interrupts disabled, and that is worth knowing
before it turns into a clock that lies.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported 3 seconds of uptime after 15 real ones, `time` claimed
3.12s for a 20-second command, and ping's one-second interval was closer to
six. One cause, not three: `ticks` was advancing at ~14.5 Hz instead of 100.
It was not the timer. virtio-gpu-pci shares IRQ 11 with the e1000 and
registered no interrupt handler at all. PCI INTx is level-triggered, so the
device held the line asserted, the kernel signalled EOI, and it fired again
immediately -- 72,000 interrupts a second, 83% of CPU0, starving the tick.
The e1000's handler read ICR as zero half a million times, correctly
answering "not mine", which is what made it look like a network-free problem.
Reading virtio's ISR byte clears it and drops the line. That is the fix.
irq_dispatch now measures each line's rate against the TSC -- not ticks,
which is the first casualty of a storm -- and names the attached handlers
once above 20000/s. It reproduces the original fault as a single line.
Found along the way, and fixed because they were real:
- lapicinit loaded TICR with xv6's uncalibrated 10000000, whose own comment
admitted it was never measured. calibrate_timers() now measures the LAPIC
and the TSC against the 8254 PIT. (It came back at 999.9 MHz, so this was
not the bug -- but the next machine is not obliged to be 1 GHz.)
- microdelay() was an empty function body. Every microdelay(1000) in the
xHCI reset path and the USB hub power-on sequence returned instantly.
- HZ is a constant in param.h now, not the literal 100 written out at a
dozen ticks-to-seconds conversions. USER_HZ is separate and deliberately
does not follow it: musl answers sysconf(_SC_CLK_TCK) with 100 always, so
times() and /proc/stat scale at the syscall boundary the way Linux does.
- TIOCGWINSZ answered a hardcoded 24x80. gfx_cols()/gfx_rows() have known
the real geometry all along; at 1024x768 the console is 128x48, so every
program that lays out a screen was formatting for the wrong one.
- TCFLSH fell through to the catch-all `return 0`, claiming to discard
input without discarding any.
uptime now advances 5.01 seconds per 5 real seconds. schfs-check passes.
Full investigation, including the two wrong hypotheses and the measurement
flaw that protected them, in docs/history/kernel.md section 13.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
