Nexoniarz is the sole author and SchOS was never published under
Apache-2.0, so this is a straight relicence. LICENSE is the FSF GPLv2 text,
every first-party SPDX header moves to GPL-2.0-or-later, and NOTICE,
README.md, docs/licensing.md and the site say so. projects/schfs-linux
follows the rest of the tree.
The GPL gives copyleft: a fork has to ship its source. It also lifts the
old "Linux drivers, never" rule, since GPL-2.0-only code combines with
GPL-2.0-or-later. "Or later" leaves room for GPLv3, but one binary still
has to pick one version, so docs/licensing.md now keeps Apache-2.0 and
GPLv3 code out of the kernel to keep Linux code possible there. BSD
4-clause code goes from "avoid" to "no", because the advertising clause
is GPL-incompatible.
LDLS still ships no .ko. That boundary is now project policy rather than
a legal requirement, and ldls.md, devices.md and licensing.md section 6
say so. refmod declares license=GPL, and ldls-check passes (27 checks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"Ą Ę Ś Ł Ż" drew as "?????" and the obvious diagnosis -- the font has no
glyphs for them -- was wrong twice over. `struct vtcell.ch` was **one byte**
holding a CP437 index, and the console mapped UTF-8 down to it on the way in.
U+0104 does not fit in a byte. No font could have fixed that; the cell had to
get wider first.
So: `ch` is a uint32 codepoint, the mapping on the way in is gone, and the cell
draws through kernel/dev/ttf.c against JetBrains Mono linked into the image.
Cell size comes from the font's measured advance instead of a hardcoded 8x16.
The grid costs 864 KB of BSS instead of 432 KB, which is the honest price of
holding a codepoint per cell for six terminals at 240x75.
The rasteriser needed three fixes before it could be trusted with this.
**21 KB of locals on a 4 KB kernel stack.** `ttf_render` held an outline (512
points as three arrays) and a raster (1024 edges) as automatics. KSTACKSIZE is
4096. They walked off the bottom of the stack into whatever was underneath,
which surfaced as user processes faulting on addresses they never touched and
then a panic inside freevm() on an overwritten page directory. Nothing pointed
anywhere near a font.
**And then again, recursively.** load_outline() held a 4736-byte outline as a
local *and recursed* for composite glyphs. Composite glyphs are exactly Ą, Ę,
Ś, Ł, Ż -- so the second crash arrived the moment the first fix let Unicode
reach the screen, looking like a fresh bug. Now a static outline per recursion
level with a depth cap of 4 (the font's deepest real nesting is 2), and the
leaf parse split into load_simple() so its 512-byte flag array is not
multiplied by the depth. Worst chain measured from the object file: ~2.3 KB.
Neither showed in tools/ttftest, which has an 8 MB stack. That is the standing
hazard of one source file built for host and kernel: the host is most forgiving
about exactly the resource the kernel is strictest about.
**Component transforms were being skipped**, on the stated theory that a wrong
transform is worse than none. It is not. `‘` in this font is the comma glyph
with a scale of -1 -- a 180-degree rotation -- and the offset that ships with
it only lands correctly after the rotation. Without it the mark went twelve
pixels into a ten-pixel cell and was clipped away entirely, so the character
read as missing from the font rather than as misplaced. F2Dot14 2x2 now, with
SCALED_COMPONENT_OFFSET honoured.
The glyph cache was ASCII-only, so every accented letter re-rasterised on every
repaint: a screenful of Polish did hundreds of bezier flattenings per scroll
where the same screenful of English did none. 95 reserved ASCII slots plus 224
shared slots keyed by codepoint, 64 KB pool. Verified 13680 cached renders
byte-identical to direct ones across collisions and a pool flush.
tools/ttftest speaks UTF-8 now. Iterating bytes meant it could only ever ask
for ASCII, and ASCII is entirely simple glyphs -- it could not reach the code
path that mattered.
Also: resolvconf's success line moves behind /proc/bootmode, same rule as
vgpud. A quiet boot opened with "resolvconf: nameserver 10.0.2.3" where the
one line was supposed to be "Welcome to SchOS!". Failures stay loud.
Verified on screen, not just on the host: Ą Ę Ś Ł Ż ć ń ó ź, Ω λ π Œ Ð Æ ß,
∞ ‘x’ → ≤ all render, panic=0 across four boots.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A boot printed about thirty lines before reaching a prompt. Every one was
useful once, and printed on every boot for ever they train the person in front
of the machine to stop reading their own console -- which is expensive on the
day one of them changes.
SchOS UEFI loader
Press F8 for boot options... booting
Welcome to SchOS! (F8 at boot for the full log, or dmesg once you are in)
root@schos / »
**Nothing was deleted, it was routed.** consputc() already wrote to the klog
ring before anywhere else, so a line can be kept in full while being held back
from the two places a person looks. kinfo() is cprintf() with that routing, and
`dmesg` still has the whole boot with timestamps afterwards. The rule for which
is which is not how interesting a line is -- everything was interesting to
somebody once -- but whether you would want to see it on a machine that is
*working*. `pci: 7 devices` is yes the first time and no every time after;
`e1000: no DMA memory for the rings` is yes for ever and stays a cprintf.
The verbose boot the F8 menu already offered now means something much bigger,
which is the other half of this: it is the only way to see any of it live.
Userspace follows through /proc/bootmode, one word. schinit, schinitd and vgpud
hold back their progress lines and never their failures -- a supervisor that
goes quiet when a job dies is worse than one that chatters.
Two things found by testing rather than by reading:
- schinit read /proc/bootmode *before* bootstrap() mounted /proc, so it got
"quiet" every time and the verbose boot was quiet in the one process that
runs first. It reads after the mount now.
- resolvconf announced "already exists; -f to replace it" on every boot after
the first, which is a line about having done nothing. It is quiet when the
file already says what it would have written, and speaks only when the two
disagree -- which means the nameserver changed and the machine is using the
old one.
Verified both ways: quiet boot is six lines, a forced-verbose build prints all
thirty plus the `verbose boot:` steps, and /proc/kmsg holds every line in both.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Four complaints, and only one of them was the thing it looked like.
**"toybox is too small."** Half true, and the fix cost no licensing at all:
236 of toybox's applets are what defconfig builds, and the rest live in
toys/pending/ -- awk, bc, diff, more, expr, tr, hexdump, stty among them. Same
0BSD tarball, switched off by a config default. 26 of them are on now, 236 ->
268. Not everything: strace wants ptrace, syslogd wants BSD's facilitynames[],
git wants OpenSSL, and those three break the link.
The toybox build also works again on this machine. Its scripts start
#!/bin/bash, which does not exist on NixOS, so the binary in the tree was one
nobody could reproduce; the shebangs are rewritten to /usr/bin/env bash on the
way in. Pending applets are enabled by editing .config directly, because
`make oldconfig` is the obvious way and undoes it -- every pending symbol is
`default n`.
**BusyBox was asked for and is not here.** It is GPL-2.0-only, and `make
ramroot` links the root image *into the kernel binary*, so it would put GPLv2
inside an Apache-2.0 executable -- which is the exact case ports/Makefile's
NOTPORTS filter and docs/licensing.md §4 exist for. nano is the same answer one
version later. Both recorded in licensing.md with what was done instead, since
"no" without an alternative is how a rule gets quietly broken later.
**An editor that is not vi.** kilo, BSD-2-Clause, one 1300-line file, no
dependencies beyond termios and TIOCGWINSZ, both of which zsh already needed.
Installed as /bin/edit as well as /bin/kilo, because somebody with a file to
fix will type `edit`.
**"wget doesn't work."** Not a userland problem, and BusyBox's wget would have
failed identically: nothing on this system could turn a name into an address,
so every program taking a hostname failed in its own way and each looked like
a separate bug. There is still no DNS client in SchOS and there does not need
to be -- musl has a complete resolver and it works over ordinary UDP sockets.
The one missing fact was which nameserver, which the kernel has had all along
from DHCP and never published. /proc/resolv.conf publishes it in resolv.conf's
exact syntax; cmd/resolvconf decides whether it becomes /etc/resolv.conf, and
will not overwrite a hand-written one without -f.
# wget -O - http://example.com/ | head -1
<!doctype html><html lang="en"><head><title>Example Domain</title>
**Something to host with.** cmd/httpd: GET and HEAD, static files, index.html
for a directory and a listing otherwise, a child per connection. No CGI, no
keep-alive, no TLS, no config file. The path check is the only
security-relevant code in it and it refuses rather than normalises -- no
component may be `..`, and percent-decoding happens first, because %2e%2e is
`..` and a check before decoding does not see it. Both forms answer 403.
And the disk is 100 MB, from 32. It is sparse, so the image is 21 MB on the
host. RAMDISK_BLOCKS went 6000 -> 8000 with it: the ramdisk was at 86% and the
next thing added would have broken `make ramroot`, which nobody would have
noticed until they used it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz