Every page of RAM went onto the free list at boot, which means writing
each one -- a link, and kfree()'s 4 KB of junk -- before the first
process ran: 64 GB of memset on a 64 GB machine to say it was free.
Memory nobody has used yet is kept as a cursor and an end per region
now, and kalloc() takes from those once the list of given-back pages
is empty. A page is first touched by whoever asked for it.
That makes the cap on RAM cheap to raise, and PHYSTOP_MAX goes from 64
to 256 GB, which still leaves 248 GB of the kernel PDPT for device
windows. MEMREGION_MAX goes from 32 to 64 for the firmware maps that
cut RAM into many pieces.
kalloc_free_bytes() walked the whole free list under the allocator's
lock -- two million links on 8 GB, every second top or fastfetch was
running, with every CPU that wanted a page waiting behind it. It reads
a counter now. And the buffer cache, which keeps what it grows to, is
reported as Buffers in /proc/meminfo and sysinfo(2) rather than as
memory used by nothing.
Checked under QEMU at 1, 2 and 6 GB: MemFree right, zsh splitting
200000 words, fork loops, a 74 MB write.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
NCPU was 16, under what a desktop has today. 64 costs 48 more TSS
I/O bitmaps and scheduler stacks, about 800 KB of BSS. Past 254 the
APIC would need x2APIC mode, which is a separate change.
With more than 16 there were two other ceilings. sched_getaffinity
wrote "CPU 0" and returned 0, and musl clears every byte past the
count returned -- so the mask came back empty and nproc, make -j and
sysconf(_SC_NPROCESSORS_ONLN) all said 1, on any machine. It returns
the mask of processors that started, and its size, now. And /proc
rendered every file into 2 KB, which /proc/cpuinfo ran out of at the
eighteenth processor without a word; /proc/pci, /proc/interrupts and
/proc/mounts were each one bigger machine from the same cut. There is
one 64 KB buffer for it now behind a sleeplock, since there is no
allocator for contiguous pages, and the generators that write raw
are given the real capacity instead of a constant.
Checked under QEMU with -smp 24: nproc 24, /proc/cpuinfo whole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The inode table was NINODE (200) entries, searched end to end on every
iget(), and a panic -- "iget: no inodes" -- when all of them were held.
Held means open, a cwd, a running binary or a directory mid-walk, so a
few busy processes reached it. iget() now finds an inode through a hash
on (dev, inum), takes a free one from a list, and makes more from a
slab cache once the NINODE in the image are all in use.
The open-file table had the same shape, NFILE (512) and then ENFILE,
and gets the same treatment: a free list, and the slab past NFILE.
/proc/fsstat's peaks now read against how many exist.
getrlimit(RLIMIT_NOFILE) said unlimited, which musl turns into
sysconf(_SC_OPEN_MAX) == -1, after which zsh believed it had no
descriptors and `exec {fd}<file` failed on the first one. It reports
NOFILE now. And a comment in sys_fs.c held a "*/" that ended it early.
Checked under QEMU: six processes holding 115 files each, 713 open
descriptions and 341 inodes at once, all back to the baseline after.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
The cache was NBUF buffers, 1 MB, on every machine: enough for one with
tens of megabytes and nothing on one with gigabytes, which re-read the
same directory and binary blocks off the disk for every command. It
still starts as those 256 in the kernel image, and a miss with every
buffer busy now makes a new one rather than evicting, up to 1/32 of RAM
or 256 MB. Growing on demand means nothing is spent that is not used,
and binit() needs nothing from the page allocator.
Lookups go through a hash on (dev, blockno) instead of walking the LRU
list, and bflush() walks a creation-order list with an unlocked filter
first, so neither costs more at 65536 buffers than it did at 256.
struct buf's data is a pointer to its own page now; the drivers copy
through their own DMA buffers, so where it sits does not matter.
On a 2 GB QEMU guest: a 40 MB file read back in 0.89 s instead of 1.83,
the big binaries in 0.17 s instead of 0.26. /proc/fsstat shows the
cache as buf_cached now / most.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
hwreport writes one folder to the first read-write FAT mount, or mounts
the first USB stick that takes vfat itself and unmounts it afterwards:
summary.txt (machine, firmware, CPU, memory, every PCI and USB device
with its driver or "-- no driver"), dmesg.txt, lspci.txt in the shape of
lspci -nnk -xxx, lsusb.txt, dmi.txt, memmap.txt, the ACPI tables as raw
.dat files iasl -d reads, and copies of /proc. Serials, the UUID and the
MSDM/SLIC tables (a Windows licence key) are left out.
It reads /sys, which is new: sysfs at Linux's paths and in Linux's
formats -- /sys/bus/pci/devices with uevent, config and resource,
/sys/bus/usb/devices, /sys/firmware/acpi/tables, dmi/tables, memmap
and efi, /sys/class/dmi/id. toybox's lspci and lsusb work unmodified
against it. The USB core now keeps a table of attached devices for it.
The machine's name comes from SMBIOS (kernel/dev/dmi.c). The UEFI loader
hands over the entry point from the configuration table, the kernel
falls back to the 0xF0000 scan, and the log gets Linux's "DMI:" line.
Two bugs found on the way:
- The loader handed over at most 40 memory-map entries, in firmware
order. A laptop's UEFI map is 60-150 descriptors with RAM above 4 GB
listed last, so that is what was dropped. The entries now have their
own area at 0x31000 with room for 256, are sorted before merging, and
the kernel's 32 usable regions keep the largest when there are more.
- MemTotal and sysinfo's totalram were PHYSTOP, an address, which counts
the PCI hole: a 6 GB machine reported 8. Now the usable RAM, summed.
usb.ids moves to /usr/share/hwdata, where lsusb looks for it, and
pci.ids joins it (`make pci-ids`, BSD-3-Clause like usb.ids).
Checked under QEMU q35: the report written to a FAT32 stick, fsck.fat
clean, DSDT.dat disassembled by iasl on the host, lspci -k and lsusb
showing names, 6 GB of RAM seen as 6137 MB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
NBLKDEV was 16 for every disk and partition together, which a laptop's
NVMe drive with its eight partitions and a USB stick come close to. The
mount table held 8, SchFS 4 volumes and 4 snapshots, FAT 4 volumes.
Now 32, 32, 16, 8 and 8; the device numbers still fit between the ones
already fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Symlinks are followed in namex_from() now, in the middle of a path as
well as at the end, and a relative target resolves from the directory
that holds the link rather than from the caller's cwd. `ln -s f d1/s;
cat d1/s` said "Symbolic link loop" because it looked for ./f. A loop is
ELOOP after 40 links, a dangling link ENOENT, and open(O_CREAT) through
a link to a file opens the file. divesymlink() is gone.
mknod from a Linux program passes (mode, dev) where the native call
passes (major, minor), and was read as the native one: `mknod n c 1 2`
made node 432,258, and mkfifo made a character device. Both are decoded
now; a FIFO is EPERM, and an existing name is EEXIST.
/proc/mounts listed devtmpfs twice: once from a fixed line and once
from the mount table. The fixed line is gone, and mount_add() refuses
a filesystem mounted on its own root, which is where a second devtmpfs
mount lands. A read-only FAT mount says ro.
/proc/partitions exists, in Linux's format, and /proc/filesystems lists
vfat.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
schdbgd ships Disabled, and its manifest explains why: a debugger that can read
the process table should not run on a machine whose owner never asked for one.
That default is right and has one bad consequence -- **the machines that most
need debugging are the ones you cannot get a shell on to enable it.** A laptop
with no serial port that stops before it can draw has nowhere to say why, and
`schinitd enable` needs a prompt that does not exist.
So `make DEBUG=1` adds a sixth entry to the F8 menu. Picking it toggles;
booting carries the choice through SCHBOOT_DEBUG_FLAG; the kernel publishes
/proc/bootdebug; schinitd starts the one job that flag may un-disable, with
the manifest's Args now naming 0.0.0.0 -- a debugger reachable only from the
machine being debugged is no use when that machine is the one that will not
talk to you.
Four decisions, since this is a network-reachable debugger:
compiled out, not hidden A release build cannot set the flag because the
code that would set it is not in the binary. A
menu item that is present and refuses is an
invitation to make it not refuse.
consent at the machine Somebody standing at the keyboard during boot is
the strongest consent this system can ask for and
the weakest one that is any use on hardware that
will not boot.
one job, named in schinitd Not a manifest key like EnableIfDebug: the general
version of "the boot menu starts things that ship
off" is worse than the specific one, and this way
what the flag can start is one readable line.
the kernel only publishes Nothing in the kernel behaves differently, so a
debug kernel and a release kernel are the same
kernel and a bug cannot be the flag's fault.
/proc/bootdebug is its own file rather than a second line in /proc/bootmode,
because bootmode's whole promise is that reading it is a string compare and
not a parser.
**Also: `tone` stopped lying.** On a machine with no sound card it reported
"the device will not take 16-bit samples", which sends you looking at the
format code instead of at the empty PCI slot -- /dev/dsp exists whether or not
hardware is behind it, and the ioctl is where the absence shows up. ENODEV is
now told apart from a format refusal.
Verified end to end: F8 -> item 6 -> boot -> schinitd says it is starting
schdbgd -> a client outside the VM connected to the forwarded port and ran
`dma`, getting the real arena dump back. The release build has no such entry
in the binary at all, and boots clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Gate 0's last structural row. kernel/core/kmem.c: slabs are pages from
kalloc() with a header at the front, and free objects hold the free list in
their own first eight bytes.
That last detail is the whole design. **An object carries no header and
freeing performs no search**: the page base of any object *is* its slab, and
the slab names its cache. It is also exactly why an object cannot exceed a
page, which matters below.
Two interfaces. kmem_cache_create/alloc/free for a subsystem with one kind of
thing -- it gets its own line in /proc/slab, which is most of why naming it is
worth the argument -- and kmalloc/kmfree over power-of-two classes from 16 to
2048 for code with no single type to build a cache around. Each cache keeps
partial and full lists; a slab that empties goes straight back to kalloc()
rather than being kept, so /proc/slab never overstates what is held.
`make kmem-test` asserts the bookkeeping on the build machine. Same arrangement
as schfs-objtest, and for the same reason: slab lists, free-list threading, the
page-to-cache lookup and whether pages actually come back are all things that
can be wrong without a kernel to be wrong in. 26 checks, including one that a
permissive allocator cannot pass -- write a distinct pattern through 512
objects and read them all back, because two objects sharing storage shows up
there and nowhere else.
One bug the test found immediately: kmem_max_obj() returned the raw page
remainder, which kmem_cache_create() then rounded *up* past its own limit. The
largest legal size was reported as illegal.
**It does not do what the register said it would.** The claim was that every
fixed table exists to work around kalloc. Measured:
struct proc 10656 NPROC 128 larger than a page
struct socket 4928 NSOCK 32 larger than a page
struct buf 4272 NBUF 256 larger than a page
struct inode 280 NINODE 200 a cache, bounded on purpose
struct device 120 NDEVICE 32 3.8 KB, never hit
struct file 48 NFILE 512 24 KB, never hit
The three largest cannot go in a page-backed slab whatever it does. NINODE is
a cache and is meant to be bounded. NFILE and NDEVICE are small enough that
their tables are rounding errors and their ceilings have never been reached.
Freeing the big ones needs a contiguous multi-page allocator, which is a
different thing and is not written. That is now in the register and in
docs/architecture/kernel.md rather than left as a claim nobody checked.
What it does fix is real, and was measured rather than assumed:
- **A pipe is 640 bytes and came from a whole 4096-byte page.** Every `|` in
a shell command burned three and a half kilobytes it never touched. Six
pipes per page now, and /proc/slab shows the page going back when they
close.
- **procread() built its answer in a 2048-byte array on the kernel stack**,
under a comment that had warned about exactly that since it was written --
it stayed a local because a whole page for 2 KB felt worse, and kmalloc is
the answer that was missing. Its frame is 64 bytes now instead of ~2100.
- procfs's other generator took a page from kalloc for the same 2 KB.
Verified on a boot: /proc/slab tracks pipe and kmalloc-2048 through real
pipelines, allocs and frees balance, and $(), ps, time, readlink, sigtest and
rename are all still green with no traps.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A boot printed about thirty lines before reaching a prompt. Every one was
useful once, and printed on every boot for ever they train the person in front
of the machine to stop reading their own console -- which is expensive on the
day one of them changes.
SchOS UEFI loader
Press F8 for boot options... booting
Welcome to SchOS! (F8 at boot for the full log, or dmesg once you are in)
root@schos / »
**Nothing was deleted, it was routed.** consputc() already wrote to the klog
ring before anywhere else, so a line can be kept in full while being held back
from the two places a person looks. kinfo() is cprintf() with that routing, and
`dmesg` still has the whole boot with timestamps afterwards. The rule for which
is which is not how interesting a line is -- everything was interesting to
somebody once -- but whether you would want to see it on a machine that is
*working*. `pci: 7 devices` is yes the first time and no every time after;
`e1000: no DMA memory for the rings` is yes for ever and stays a cprintf.
The verbose boot the F8 menu already offered now means something much bigger,
which is the other half of this: it is the only way to see any of it live.
Userspace follows through /proc/bootmode, one word. schinit, schinitd and vgpud
hold back their progress lines and never their failures -- a supervisor that
goes quiet when a job dies is worse than one that chatters.
Two things found by testing rather than by reading:
- schinit read /proc/bootmode *before* bootstrap() mounted /proc, so it got
"quiet" every time and the verbose boot was quiet in the one process that
runs first. It reads after the mount now.
- resolvconf announced "already exists; -f to replace it" on every boot after
the first, which is a line about having done nothing. It is quiet when the
file already says what it would have written, and speaks only when the two
disagree -- which means the nameserver changed and the machine is using the
old one.
Verified both ways: quiet boot is six lines, a forced-verbose build prints all
thirty plus the `verbose boot:` steps, and /proc/kmsg holds every line in both.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Four complaints, and only one of them was the thing it looked like.
**"toybox is too small."** Half true, and the fix cost no licensing at all:
236 of toybox's applets are what defconfig builds, and the rest live in
toys/pending/ -- awk, bc, diff, more, expr, tr, hexdump, stty among them. Same
0BSD tarball, switched off by a config default. 26 of them are on now, 236 ->
268. Not everything: strace wants ptrace, syslogd wants BSD's facilitynames[],
git wants OpenSSL, and those three break the link.
The toybox build also works again on this machine. Its scripts start
#!/bin/bash, which does not exist on NixOS, so the binary in the tree was one
nobody could reproduce; the shebangs are rewritten to /usr/bin/env bash on the
way in. Pending applets are enabled by editing .config directly, because
`make oldconfig` is the obvious way and undoes it -- every pending symbol is
`default n`.
**BusyBox was asked for and is not here.** It is GPL-2.0-only, and `make
ramroot` links the root image *into the kernel binary*, so it would put GPLv2
inside an Apache-2.0 executable -- which is the exact case ports/Makefile's
NOTPORTS filter and docs/licensing.md §4 exist for. nano is the same answer one
version later. Both recorded in licensing.md with what was done instead, since
"no" without an alternative is how a rule gets quietly broken later.
**An editor that is not vi.** kilo, BSD-2-Clause, one 1300-line file, no
dependencies beyond termios and TIOCGWINSZ, both of which zsh already needed.
Installed as /bin/edit as well as /bin/kilo, because somebody with a file to
fix will type `edit`.
**"wget doesn't work."** Not a userland problem, and BusyBox's wget would have
failed identically: nothing on this system could turn a name into an address,
so every program taking a hostname failed in its own way and each looked like
a separate bug. There is still no DNS client in SchOS and there does not need
to be -- musl has a complete resolver and it works over ordinary UDP sockets.
The one missing fact was which nameserver, which the kernel has had all along
from DHCP and never published. /proc/resolv.conf publishes it in resolv.conf's
exact syntax; cmd/resolvconf decides whether it becomes /etc/resolv.conf, and
will not overwrite a hand-written one without -f.
# wget -O - http://example.com/ | head -1
<!doctype html><html lang="en"><head><title>Example Domain</title>
**Something to host with.** cmd/httpd: GET and HEAD, static files, index.html
for a directory and a listing otherwise, a child per connection. No CGI, no
keep-alive, no TLS, no config file. The path check is the only
security-relevant code in it and it refuses rather than normalises -- no
component may be `..`, and percent-decoding happens first, because %2e%2e is
`..` and a check before decoding does not see it. Both forms answer 403.
And the disk is 100 MB, from 32. It is sparse, so the image is 21 MB on the
host. RAMDISK_BLOCKS went 6000 -> 8000 with it: the ramdisk was at 86% and the
next thing added would have broken `make ramroot`, which nobody would have
noticed until they used it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
schdbgd bridges TCP to the debugger, which is the one way in that does not
need you to be sitting at the machine. It is a bridge and nothing else: a line
in becomes a line written to /dev/dbgro and the answer comes back, so `nc` is a
complete client and there is no clever client to be broken on the day you need
this.
# schdbgd &
schdbgd: debugger on port 4444, loopback only
$ nc 127.0.0.1 4444
dma
arena 0xffff80003da41000-0xffff80003ea41000 16384 KB total, ...
A kernel debugger plus a TCP socket is a remote root hole, so three things were
decided rather than discovered:
- It does not start by itself. schdbgd.job ships Disabled. SchOS has no
kernel command line, so the boot flag the plan asked for is the job
manifest, which is the same thing in this system's own idiom.
- It binds loopback; -a names an address and says so in a paragraph.
- It cannot reach a view that changes state, enforced in the kernel.
That last one is /dev/dbgro: /dev/dbg on minor 1. The minor is the one piece of
per-open state a character device already sees, so which node you opened is the
permission -- nothing to latch, nothing to remember between the write and the
read, no way across. Which views are refused comes from dbg_register_rw() on
the registration itself, because a central list of dangerous views goes stale
in the direction where a new view is quietly treated as safe. Today that is
`watch <addr>`; `watch` with no argument is still the listing and still
answered.
Also: socket() now accepts IPPROTO_TCP with SOCK_STREAM and IPPROTO_UDP with
SOCK_DGRAM. They name the default rather than departing from it, and toybox's
nc writes them out -- so TCP was "Protocol not supported" on a system whose
whole network is TCP.
docs/plan/debugger.md retires into docs/architecture/debugging.md; 16 files
repointed. Every plan in docs/plan/ that was open is now closed, so the next
thing is Gate 0 itself: the survey, with the instrument built.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The site and several documents still described the system as it was before
virtual terminals, the new schinit, the hybrid work and descriptor passing.
docs/architecture/init.md described the wrong program. It documented a single
schinit that parses manifests and supervises jobs, which has not been true since
PID 1 was split: PID 1 forks a supervisor, spawns jobs on its behalf and reaps;
the job table lives in /proc/schinit; a heartbeat runs both ways; and
proc_reincarnate() re-execs PID 1 in place rather than panicking. Rewritten
around what exists, keeping the reasoning that is still load-bearing -- the five
failures of the sibling-init scheme, the escalation ladder, and the three bugs in
the reincarnation path that each had to happen before they were obvious.
docs/plan/init.md is deleted, which is the tree's own rule for finished work and
had not been applied. Fourteen source comments referenced it by part number, so
they are repointed at the architecture doc by section name rather than left
dangling -- a deleted document nobody notices is worse than a stale one.
docs/architecture/devices.md gained the section it has been missing since
/dev/pci existed: what a driver needs from a kernel, why mmap is checked against
the caller's claims, why DMA is a call and not a mapping, and why the write back
after an interrupt is not optional. Also that a released device does not come
back by itself, which is true and was nowhere.
docs/architecture/networking.md gained a descriptor-passing section, and
docs/architecture/README.md's stack diagram gained the two layers and the third
seam it was missing. "Two seams hold the whole thing together" has not been true
since /dev/pci.
docs/plan/README.md said the hybrid work was deliberately last, on the argument
that an interface with no consumer is wrong in ways nobody can see. The argument
was right; the conclusion was not, and the document now says why it changed --
the alternative to a driver compatibility layer is writing a driver for every
device that exists, and the original objection is answered rather than ignored
because SchOS's own drivers are the consumers.
The site: a Hybrid section with the eviction transcript, cards for virtual
terminals, schinit and drivers outside the kernel, and the numbers remeasured
rather than estimated -- 46,961 lines, 207 syscalls. The boot log in app.js is
from a boot taken today, and the lines are trimmed to what the console can show
without clipping, each still a verbatim prefix of real output.
Two small rendering fixes found by looking at the pages rather than assuming:
.console pre's min-height is now scoped to the hero, so a static transcript sizes
to its content instead of reserving eight lines it does not have; and the docs
reader's contents panel strips inline marks from headings, so a heading written
`proc_reincarnate()` no longer carries its backticks into the sidebar.
Every intra-doc link checked; none broken.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/init.md milestones I2 and I3. The rule change.
**I2 -- the heartbeat.** The failure the two-init scheme could not see is that
an init usually does not die, it *hangs*: wait() never returns for a process
that is merely stuck, so a supervisor watching a wedged init reports
everything normal for ever. PID 1 now pings every two seconds and expects an
answer within ten; silence means stuck, and stuck is worth acting on.
Exercised rather than reasoned about, as the plan asks: `sysrq w` wedges
schinitd by making the scheduler pass over it for ever. It stays alive, keeps
its descriptors and appears in every listing -- which is the point.
Two things that only showed up by running it:
- kill() sets a flag the target checks when it next runs, and the premise
here is that it is not running. Waiting for a corpse that may never be
produced turns the recovery path into a second hang. PID 1 replaces the
supervisor *without waiting*; the old one's socket is closed, so the moment
it runs again its first write fails and it exits.
- the replaced supervisor must notice the hangup. poll() reports POLLHUP and
never POLLIN again, so a loop that only looks for POLLIN sits there
complaining that PID 1 has stopped pinging it.
**I3 -- proc_reincarnate().** exit() on initproc panicked. Now the kernel
tears down nothing, keeps pid 1, and re-execs /bin/schinit in place with a
generation counter. The pid stays 1, so every orphan the kernel reparented is
still correctly parented; the children survive; the open files survive, which
is why this is the first line of exit() and not the last; and the job table
survives in /proc/schinit, which is what it is there for.
The escalation ladder: generations 2-3 carry on, generation 4 ignores
/etc/schinit and starts a console shell only -- a manifest that kills init
must not kill it for ever -- and generation 5 stops, with PSOGM rendering
INIT_RESURRECTION_FAILED, a call chain and a QR code.
Three bugs found by running it, each a lesson about exec():
- exec() returns 0 on success; it does not fail to return. The new image
starts when the kernel returns to userspace through the rewritten
trapframe. Returning from exit() is the success path.
- exit() was reached because `killed` was set, and the trap path checks it
again on the way out. Leaving it set exits the new image before its first
instruction: five generations in a few microseconds, a resurrection loop
that looks exactly like the crash it was meant to survive.
- exec() keeps open files, which is what gives the new image a console --
and also keeps the previous life's socket, holding the old supervisor's
channel up so it never sees a hangup.
Verified: `sysrq i`, and the shell being typed into keeps its pid across the
death and rebirth of PID 1, with /proc/schinit byte-identical either side.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A timer interrupt that arrives while interrupts are disabled is not delayed,
it is lost -- the LAPIC in periodic mode holds one pending interrupt and drops
the rest. So anything the kernel does with interrupts off for longer than
10 ms makes `ticks` run slow, and it never catches up.
That has now presented twice as "uptime is wrong": once as an interrupt storm
taking 83% of the CPU, once as heavy console output on a display that is
expensive to draw to. Both times the tick was the messenger, and both times it
looked like a timekeeping bug.
monotonic() reads the TSC instead. It is a counter in the silicon that
advances whether or not this kernel is paying attention, it is already
measured against the PIT at boot, and reading it is one instruction and no
lock. wallclock(), /proc/uptime, sysinfo, getrusage and times() all go through
it now.
`ticks` keeps the job it is good at -- the scheduler preempts on it, sleep()
counts it -- where losing one means a slightly longer sleep rather than a
wrong answer about what time it is.
Lost ticks are no longer harmful, which makes them invisible, which is worse.
So /proc/interrupts now says
timer: 3383 ticks taken, 3387 expected
and names the gap when it grows, because a machine dropping timer interrupts
is spending too long with interrupts disabled, and that is worth knowing
before it turns into a clock that lies.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported 3 seconds of uptime after 15 real ones, `time` claimed
3.12s for a 20-second command, and ping's one-second interval was closer to
six. One cause, not three: `ticks` was advancing at ~14.5 Hz instead of 100.
It was not the timer. virtio-gpu-pci shares IRQ 11 with the e1000 and
registered no interrupt handler at all. PCI INTx is level-triggered, so the
device held the line asserted, the kernel signalled EOI, and it fired again
immediately -- 72,000 interrupts a second, 83% of CPU0, starving the tick.
The e1000's handler read ICR as zero half a million times, correctly
answering "not mine", which is what made it look like a network-free problem.
Reading virtio's ISR byte clears it and drops the line. That is the fix.
irq_dispatch now measures each line's rate against the TSC -- not ticks,
which is the first casualty of a storm -- and names the attached handlers
once above 20000/s. It reproduces the original fault as a single line.
Found along the way, and fixed because they were real:
- lapicinit loaded TICR with xv6's uncalibrated 10000000, whose own comment
admitted it was never measured. calibrate_timers() now measures the LAPIC
and the TSC against the 8254 PIT. (It came back at 999.9 MHz, so this was
not the bug -- but the next machine is not obliged to be 1 GHz.)
- microdelay() was an empty function body. Every microdelay(1000) in the
xHCI reset path and the USB hub power-on sequence returned instantly.
- HZ is a constant in param.h now, not the literal 100 written out at a
dozen ticks-to-seconds conversions. USER_HZ is separate and deliberately
does not follow it: musl answers sysconf(_SC_CLK_TCK) with 100 always, so
times() and /proc/stat scale at the syscall boundary the way Linux does.
- TIOCGWINSZ answered a hardcoded 24x80. gfx_cols()/gfx_rows() have known
the real geometry all along; at 1024x768 the console is 128x48, so every
program that lays out a screen was formatting for the wrong one.
- TCFLSH fell through to the catch-all `return 0`, claiming to discard
input without discarding any.
uptime now advances 5.01 seconds per 5 real seconds. schfs-check passes.
Full investigation, including the two wrong hypotheses and the measurement
flaw that protected them, in docs/history/kernel.md section 13.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Everything created after boot was stamped 1970. know() in SchFS and now_sec() in
the v1 filesystem both returned uptime(), under comments saying the kernel had no
wall clock -- which stopped being true when time_init() started reading the RTC.
The comments outlived the condition they described.
Two errors, and the second is the less obvious: uptime() counts 10 ms *ticks* and
they were being used as *seconds*, so a node created 0.6 s into boot read back as
00:01:00 and the clocks ran a hundred times too fast. Both now go through
wallclock(), which exists precisely so nothing can disagree with gettimeofday
about the time. Confirmed against the RTC line from the same boot.
The occupancy counters are the instrumentation docs/plan/roadmap.md asked for
while hunting the ls -lR hang: inode, file and pinned-buffer counts with a
high-water mark each, maintained at the 0->1 and 1->0 transitions rather than by
scanning, so they cost one increment on a path that already holds the table's
lock.
The peaks are the diagnostic. A live count only describes the moment you looked,
and a reference leak is invisible in it right up until the table is full -- at
which point iget() panics and filealloc() returns 0, which is where the trail
used to go cold.
What they measured: across ten iterations of ls -lR with writes interleaved, 33
execs and 13378 tree descents, inode_peak stayed at 9/200, file_peak at 9/512 and
buf_pinned_peak at 1/256, with the SchFS bracket unlocked throughout. That
eliminates the roadmap's own hypothesis -- "a lock or reference-count leak
somewhere in the *at() paths" -- and the hang did not reproduce. It is very
likely fixed in passing by the *at() dirfd rewrite, the getdents cookie rewrite
or SchFS becoming the root, all of which landed after it was reported.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The TCP/IP stack reached straight into the first driver anyone wrote.
net.c called e1000_present(), the lwIP glue was named netif_e1000.c and
called e1000_transmit(), and include/defs.h declared the driver's
internals to the whole kernel. The second NIC driver would therefore
have arrived with a near-identical copy of the glue file and a patch to
the protocol stack, which is the arrangement include/device.h was
written to prevent -- the e1000 even said so, with `.ops = 0, // no
class vtable yet; there is no net class`.
There is now. A driver publishes a struct netdev_ops -- transmit,
receive, mac, link_up -- and is finished: it never mentions lwIP, and
nothing above it learns its name. The display class was already this
shape; this is the same shape for networking, and the two now read the
same way in kernel/dev/device.c.
What that made possible immediately:
- One netif per bound device instead of one per driver. lwIP's glue is
netif_eth.c, it takes a struct device, and it holds up to NETIF_MAX
interfaces. net.c attaches every network device it finds and starts
DHCP on each, because which interface the network answers on is not
ours to decide.
- /proc/netif lists all of them, one block of fields each, with the
interface name and the driver that claimed it.
- The ARP self-test moved from the e1000 to the class. Nothing in it
was chip-specific, and it is the first thing anyone will want to run
against the next driver. Still `echo n > /proc/sysrq`.
- Private headers live with their driver: e1000.h was in include/,
where exactly one file could use it. The driver build now adds the
driver's own directory to the include path.
The e1000 also drives more than one card. Its probe() refused the second
outright, because there was a single static instance -- so a machine
with two of them drove one and silently ignored the other. Instances are
an array now, and the instance is hung on dev->priv by a new optional
`attached` hook that the bus calls once the device exists. probe() runs
before device_add(), so there was previously nowhere to put it; that is
the whole reason the hook exists rather than a line inside probe.
QEMU gets an explicit NIC on every target (QEMU_NET). The default device
happens to be an e1000 on this machine type today, which is exactly the
sort of thing that stays true until a QEMU release changes it and the
network stops being exercised without anyone noticing.
Verified:
- bootcheck -Net passes, 48 [ok], no failures -- including the moved
self-test and two new checks that /proc/netif names both the
interface and the driver behind it, which together say the stack
went through the class rather than through a driver it was compiled
to know.
- Two NICs attached by hand (-device e1000 twice, second with its own
MAC): eth0 and eth1 both attach, each reports its own MAC in
/proc/netif, and each gets its own DHCP lease. Before this commit
the same machine produced one interface.
- make schfs-check still passes in full.
One trap worth recording: moving a header broke the build for anyone
with stale .d files -- make stopped with "No rule to make target
'include/e1000.h'". CFLAGS gains -MP, which emits a phony target per
header so a moved or deleted one can never wedge the build again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The TCP/IP stack landed with its end-to-end test performed by hand: start
a listener, boot, type nettest, read the output. That is evidence once
and nothing afterwards, and it is exactly the kind of check that quietly
stops being run.
bootcheck -Net does the whole exchange. A listener runs on this host on a
port picked by binding one and letting go, the guest is told to connect
out to 10.0.2.2 at that port, and both ends are asserted: the guest
reports what it received, the listener reports what arrived. One side
alone proves much less than it looks -- a stack that completes a
handshake and then drops every byte satisfies any check made from inside
the guest.
The listener is a background job, a separate process, because this
harness has one hard rule: nothing may block the writer feeding QEMU's
stdin. A socket accept is precisely the wait that deadlocked two earlier
attempts at reading QEMU's output. It answers the protocol nettest
speaks and then closes -- the close is load-bearing, since nettest reads
until end of file and a listener that stayed open would hang the guest
rather than fail it.
The NIC is spelled out (-netdev user + -device e1000) rather than left to
QEMU's default. Other runs can take the default and still answer "did a
driver bind"; a run that asserts on an address should be reading its own
configuration.
/proc/netif is new, and the address is why. Until now the only report was
a line on the console at boot, which userland cannot read and a test can
only find by scraping the transcript. It gives interface, MAC, state,
address, netmask, gateway, MTU and frame counts. Named netif rather than
net on purpose: /proc/net is a *directory* on Linux, and a plain file
there would give ENOTDIR to anything reaching for /proc/net/dev, which is
worse than not having it. The counters are kept at the lwIP seam rather
than in the driver, because a frame the driver received and the netif
dropped never reached the stack.
Verified: 38 [ok], no failures. Eleven of them are new -- lwIP up, DHCP
obtaining 10.0.2.15 from SLIRP (a number nothing in the guest knows in
advance, so it is the exchange completing rather than a guess), the four
/proc/netif fields, frames counted in both directions, the handshake, the
reply read back, and the listener confirming HELLO-FROM-SCHOS arrived.
One bug found by writing it: $netPort was chosen after the command list
was built, so the guest ran `nettest 10.0.2.2` with no port and printed
its usage. An unset PowerShell variable interpolates to nothing rather
than failing, which is worth remembering next time a command in this
file looks right and behaves oddly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The last three phases of the filesystem, which were written together and
touch the same files throughout -- kmount.c, objw.c and vfs.c are each
rewritten by all three -- so they land as one commit rather than three
that could not be built separately.
Durability. A transaction that reaches the platter out of order is worse
than one that never reached it: the uberblock can name a tree whose
blocks are still in the drive's write cache. bdirty/bflush give the
buffer layer an explicit barrier, ideflush issues ATA FLUSH CACHE and
usb_storage_flush the SCSI SYNCHRONIZE CACHE that means the same thing,
and a commit now waits for the data before it writes the root that
points at it. The uberblock groups are read newest-first with fallback,
so a volume whose newest roots are torn mounts at an older one and says
which generations were lost.
Reflink. Extents carry a refcount, so two objects can name the same
blocks and neither frees them while the other holds them. Exposed as
FICLONE -- Linux's ioctl value, so `cp --reflink` works unmodified --
and as cmd/reflink for the case where there is no cp to hand.
Attributes, and the one genuinely new idea here. attr.c stores named
values on an object, reachable through setxattr/getxattr/removexattr at
Linux's syscall numbers. On top of that, schfs_index declares an index
over an attribute name and schfs_query answers "which objects carry this
value" from the B-tree rather than by walking. A query against an
unindexed attribute is refused with an error, never silently answered by
a full scan: a query that quietly becomes a scan is worse than one that
admits it cannot help. cmd/schattr drives both.
Three bugs fixed on the way, each found by the numbers being wrong
rather than by inspection:
- statfs's f_fsid was declared int64[2]. Linux's fsid_t is two *ints*,
so every field after it landed one slot late: userland read f_frsize
out of f_namelen, got 255, and df reported a 32 MB root filesystem
as 1992 KB. It hid for as long as it did because the fields used to
be invented constants, so wrong numbers looked like the usual ones.
- struct inode's nlink was a short against SchFS's uint32, so a file
past 32767 names came back negative -- and iput frees an object
whose count reaches zero. It is an int now, signed on purpose, so an
underflow lands somewhere a check can see rather than wrapping.
- filewrite split every write to fit v1's log. That limit belongs to
the journal, not to writing, and SchFS makes one transaction of
whatever it is handed: a 1 MB write was becoming 170 commits and
170 flushes for nothing. fs_ops carries max_write now, and SchFS
sets no limit.
Also here: a real mount table, so `mount -t schfs /dev/hdb /mnt` shows
up in /proc/mounts -- df looks a path up there before it calls statfs at
all, so a mount missing from that list was invisible to it -- several
volumes mounted at once, snapshots mounted by name, and /proc/fsstat
with an rdtsc-based counter, which is the only instrument fine enough to
see inside a single syscall.
Verified: `make schfs-check` passes in full, including the sweep that
crashes the volume at each of 119 points mid-transaction and requires
every one to mount with exactly its committed data, and the case where
both newest uberblocks are rubbish and the volume still comes back. The
headless boot check passes with 27 [ok] and no failures, on a SchFS root.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
struct file already carried a uint64 offset and bread already took a
uint64 block number. The narrowing was one boundary in the middle:
devsw's read and write took a 32-bit uint, so fileread passed a 64-bit
f->off into a 32-bit parameter and the top half was discarded.
The effect was not a refusal at 4 GB but silent wraparound past it. A
read at 5 GB returned the bytes at 1 GB, reporting success. disk.c had a
DISK_MAX_BYTES constant documenting the limit, and nothing anywhere
referenced it -- the cap was described but never enforced, which is the
worst of the three options.
The signature is now uint64 across all nine files that carry it, and
diskread/diskwrite no longer narrow the block number on the way to
bread. Widening this is a prerequisite for NVMe and for any real disk:
namespaces start well above 4 GB and the failure mode reads valid data
from the wrong place.
Verified end to end rather than by inspection. A 6 GB sparse image with
"PAST4GB-MARKER-OK" written at byte 5368709120, attached as /dev/hdb to a
ramdisk-root kernel so device 1 was free:
# dd if=/dev/hdb bs=4096 skip=1310720 count=1 | od -c | head -2
0000000 P A S T 4 G B - M A R K E R - O
Under the old code that offset truncates to 1 GB, where the image is
zeroes. The whole path is exercised: f->off, devsw, diskread, bread and
ide.c's LBA48.
Worth recording for next time: `make ramroot` stages the ESP itself, and
running `make esp` afterwards rebuilds the kernel without RAMROOT and
silently undoes it. The tell is a 855 KB kernel where a 25 MB one is
expected.
110 [ok], no failures, on the default build.
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz