fastfetch reported "getifaddrs(&ifAddrStruct) failed", and the right answer to
that is not a patch to fastfetch. Asking what interfaces a machine has is
something every networked program does, and on Linux there is exactly one way:
a NETLINK_ROUTE socket. musl implements getifaddrs() over it, so a libc call
that looks like a syscall is really a small protocol conversation -- and without
this side of it every caller fails the same way.
kernel/net/netlink.c is a responder rather than a general socket family. No
event stream, no multicast groups, nothing subscribes to link state: a request
arrives, the whole answer is generated into the socket's buffer, and reads drain
it. That shape is chosen, not a shortcut -- getifaddrs sends a dump and reads
until NLMSG_DONE with MSG_DONTWAIT, so generating at send time means a read
never blocks and the non-blocking flag is honoured for free.
RTM_GETLINK returns one RTM_NEWLINK per interface with IFLA_IFNAME and
IFLA_ADDRESS; RTM_GETADDR returns one RTM_NEWADDR per address with IFA_ADDRESS,
IFA_LOCAL and IFA_LABEL. Anything else gets a bare NLMSG_DONE, because the
caller's next move is a read either way and an unexpected error message is worse
than nothing to read.
The data is not netlink's. Interfaces come from the netdev class and addresses
from lwIP's netifs, exactly as /proc/netif reads them; nothing in the file knows
what an e1000 is. Interface indices matter more than they look -- getifaddrs
matches address records to link records by index, so the two dumps have to
agree. Loopback is 1, netdevs follow from 2.
Verified by reading it back through musl rather than by inspecting the bytes:
lo flags=0x49 fam=-1
eth0 flags=0x1043 fam=17 (AF_PACKET, the MAC)
lo flags=0x49 fam=2 addr=127.0.0.1 mask=255.0.0.0
eth0 flags=0x1043 fam=2 addr=10.0.2.15 mask=255.255.255.0
Correct flags, addresses and netmasks, and the link records pair with the
address records.
One thing this does not close: fastfetch's Local IP module defaults to
default-route-only, which calls ffNetifGetDefaultRouteIfName() and reads
/proc/net/route. SchOS has no routing table and no such file, so the module
still shows nothing -- now for a reason that is about routing rather than about
enumeration. That is the next file to provide.
socktest still passes; the AF_UNIX and AF_INET paths are untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
setsockopt was `return 0;` and getsockopt wrote a zero for whatever was asked.
The comment said it was so a server setting SO_REUSEADDR and treating failure as
fatal would not fail. That trade is the wrong way round: a caller told "no"
adapts, a caller told "yes" changes its behaviour on the strength of it -- sets
SO_RCVTIMEO and then blocks forever in a read it believes will time out, sets
TCP_NODELAY and reports latency numbers that measure Nagle. The failure is
silent, remote from the call, and indistinguishable from a bug in the stack.
Six options are honoured now and everything else is ENOPROTOOPT. SO_REUSEADDR,
SO_KEEPALIVE, SO_BROADCAST and TCP_NODELAY reach lwIP's pcb; SO_SNDBUF/SO_RCVBUF
are accepted and report the real size on read. SO_REUSEADDR is implemented rather
than refused precisely because of the original comment's concern -- it is the one
option a server really does set and really does check.
accept4 becomes its own table entry rather than an alias for accept. It has to
be: accept takes three arguments, so a shared handler reading a fourth register
reads whatever the caller last left there and invents a SOCK_NONBLOCK out of
stack litter. SOCK_CLOEXEC and SOCK_NONBLOCK are now honoured by socket(),
socketpair() and accept4() -- a dropped CLOEXEC leaks a listening socket across
every exec, and a dropped NONBLOCK has the caller block forever in what it
believes is a poll loop.
ICMP ping sockets: socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP), on lwIP's raw API,
with the callback stripping the variable-length IP header. Only echo replies are
eaten, and that restriction is load-bearing -- raw_input runs before lwIP's own
icmp_input, so consuming every ICMP message would swallow the echo *requests* and
this machine would silently stop answering pings from outside.
Loopback, so 127.0.0.1 is a real destination. LWIP_NETIF_LOOPBACK is the half
that is easy to miss: without it a packet addressed to an interface's own address
goes out of the wire and never comes back. With NO_SYS=1 nothing drains the
loopback queue, so the network thread calls netif_poll_all().
cmd/ping is first-party rather than toybox's, and the reason is a limitation not
a preference: toybox reads replies with recvmsg(2) and wants the TTL through an
IP_RECVTTL control message, and SchOS has neither. recvmsg is item 1 of
docs/plan/foundations.md, where it is wanted for SCM_RIGHTS anyway, and should
not be rushed to make one applet run.
Two bugs found on the way. Every AF_INET socket failed with ENFILE until DHCP
bound, because inet_new() demanded an *address* before handing out a socket and
reported it as "file table overflow"; net_is_ready() (lwIP up) is now distinct
from net_is_up() (DHCP bound). And that bug was hiding a bad test: socktest
asserted "AF_INET is refused, not faked", true when written, false since AF_INET
landed, and green the whole time because the suite runs before DHCP binds and the
ENFILE made the refusal look real. Fixing the kernel is what turned it red.
Verified: ping to 127.0.0.1, localhost, the gateway, 1.1.1.1 and 9.9.9.9, all
0% loss; socktest ALL CHECKS PASSED with ten new checks, including a setsockopt
round trip and an unknown option that must be refused -- a permissive stub cannot
pass both at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The second of the two things the stack owed. recvfrom accepted the
address arguments and ignored them, so every caller was told nothing
about where a datagram came from -- which for UDP is most of the point:
a server that cannot see the sender cannot reply to it.
Fixing it properly meant fixing something worse that was sitting
underneath. UDP payloads went into the same byte ring TCP uses, with no
record of where one datagram ended and the next began, so two datagrams
that arrived together came back from one read as one. That is a bug
whose appearance depends on timing and whose blame lands on the sender.
Datagrams now carry a header alongside the bytes: source address, source
port, length. Sixteen of them per socket, in a ring beside the existing
one. Whole buffers would have been 16 sockets x 16 datagrams x an MTU of
static memory for something almost always empty; only the boundaries need
keeping, and those are eight bytes each. A datagram too big for the
buffer it is read into is truncated and the remainder discarded, rather
than left in the ring to be delivered as the head of the next one. One
that arrives with the queue full is dropped whole -- that is UDP's own
contract, and half a datagram in the ring would corrupt every one after.
An empty queue and a zero-length datagram are kept apart, because a
sender really can send zero bytes and the right answer to that is 0
rather than "nothing has arrived yet".
sendto grew the mirror image: a destination address on a datagram
socket, which is what a server replying to whoever just wrote to it
needs. On TCP a destination is ignored rather than refused -- the
connection decides where the bytes go, and programs pass one out of
habit. For a stream, recvfrom's source is read from the pcb: it is the
peer, and it is the same answer for every byte.
Verified: bootcheck -Net now covers UDP too, 45 [ok] and no failures.
The address check is real rather than cosmetic -- nettest deliberately
leaves its sockaddr uninitialised, so a kernel that filled in nothing
would print stack rubbish instead of 10.0.2.2 and the port the responder
is actually on. The boundaries are checked by byte count: the responder
sends 20 bytes and then 16, and the guest reports reading 20 and then
16. Treated as a stream the first read would have taken all 36.
Left for later, and deliberately: accept() still does not report the
peer's address, and getsockname/getpeername do not exist.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
lwIP 2.2.0, fetched by ports/lwip and compiled straight into the kernel.
Not written from scratch, and the reason is not the packet formats: it is
congestion control, retransmission, window management and twenty years of
corner cases that only show up against a real peer. Not FreeBSD's
netinet either, though the licence would have allowed it -- that stack is
not a library, it reaches into mbufs, epoch(9), netisr, VNET and uma(9),
so adopting it means porting FreeBSD's kernel infrastructure first. lwIP
was written for exactly this situation: a small kernel with a raw
Ethernet driver and a port layer of a few hundred lines.
It is kernel code, so nothing is installed into the sysroot and there is
no second build system: the top-level Makefile compiles the files it
wants against our port headers. The file list is explicit rather than a
wildcard, because lwIP ships IPv6, 6LoWPAN, PPP, SLIP, DNS-SD and a dozen
apps in the same tree, and building what is not configured yields either
dead code or a link error naming a port function nobody meant to write.
Its sources are unmodified and its warnings are silenced for its files
only -- patching them would mean maintaining a fork.
The port layer is ours: a lock, a clock, the netif that hands frames to
e1000, lwipopts.h, and a shim/ directory of tiny headers so lwIP's
<string.h> and friends resolve to the kernel's functions instead of the
host's, whose prototypes disagree and would otherwise be found on the
default include path.
NO_SYS=1, so lwIP has no threads of its own and one kernel thread feeds
it. A thread rather than the interrupt handler, because a call into lwIP
can reach the driver, the driver can sleep, and an interrupt handler
cannot -- so the interrupt still only clears the cause register and the
thread polls. kthread_create is new and generally useful: a process with
a kernel-only page directory, no files, no cwd, no parent, dispatched
from forkret, which can therefore sleep and be preempted like anything
else. DHCP obtains an address at boot and the console says which one.
AF_INET went in exactly where phase 2 said it would. socknew dispatches
on the domain, kernel/net/inet.c implements the internet side on lwIP's
raw API, and not one syscall changed shape: bind, connect, listen,
accept, read and write reach the same descriptors they always did. TCP
and UDP both work. cmd/nettest opens a connection, writes, and reads the
answer back.
Two things are owed and named here so they are not discovered later:
recvfrom does not yet report the source address, and the socket paths
poll on the timer tick instead of sleeping on the socket. Both are
follow-ups, not redesigns.
NOTICE carries lwIP's BSD-3 text. Clause 3 is no-endorsement, not the
old advertising clause, so it sits with Apache-2.0 without difficulty.
Verified: the tree builds clean, and the headless boot check passes with
27 [ok] and no failures with the stack compiled in and the thread
running -- which is the part that would break first if netinit deadlocked
or the thread starved anything. An end-to-end connection test belongs in
that suite and is the next commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz