schdbgd bridges TCP to the debugger, which is the one way in that does not
need you to be sitting at the machine. It is a bridge and nothing else: a line
in becomes a line written to /dev/dbgro and the answer comes back, so `nc` is a
complete client and there is no clever client to be broken on the day you need
this.
# schdbgd &
schdbgd: debugger on port 4444, loopback only
$ nc 127.0.0.1 4444
dma
arena 0xffff80003da41000-0xffff80003ea41000 16384 KB total, ...
A kernel debugger plus a TCP socket is a remote root hole, so three things were
decided rather than discovered:
- It does not start by itself. schdbgd.job ships Disabled. SchOS has no
kernel command line, so the boot flag the plan asked for is the job
manifest, which is the same thing in this system's own idiom.
- It binds loopback; -a names an address and says so in a paragraph.
- It cannot reach a view that changes state, enforced in the kernel.
That last one is /dev/dbgro: /dev/dbg on minor 1. The minor is the one piece of
per-open state a character device already sees, so which node you opened is the
permission -- nothing to latch, nothing to remember between the write and the
read, no way across. Which views are refused comes from dbg_register_rw() on
the registration itself, because a central list of dangerous views goes stale
in the direction where a new view is quietly treated as safe. Today that is
`watch <addr>`; `watch` with no argument is still the listing and still
answered.
Also: socket() now accepts IPPROTO_TCP with SOCK_STREAM and IPPROTO_UDP with
SOCK_DGRAM. They name the default rather than departing from it, and toybox's
nc writes them out -- so TCP was "Protocol not supported" on a system whose
whole network is TCP.
docs/plan/debugger.md retires into docs/architecture/debugging.md; 16 files
repointed. Every plan in docs/plan/ that was open is now closed, so the next
thing is Gate 0 itself: the survey, with the instrument built.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
H2 of docs/plan/hybrid.md -- the milestone the plan itself calls the one
that proves the whole idea, and the one that cannot be skipped.
# cat /proc/schinit
1 4 11 os.schos.vgpud
# kill 4
schinitd: restarting os.schos.vgpud
vgpud: claimed
vgpud: pid 8 drew a test pattern from userspace
The test pattern ends in a twelve-block tally of the drawing process's
pid, because a second run that redraws an identical picture is
indistinguishable from a first run that never stopped. Read off the
virtio-gpu scanout across four generations it says 4, 8, 10, 12, and the
DMA arena hands back the same physical address every time.
What it took:
* A halt the kernel can apply to a device it does not understand.
Clearing PCI_CMD_BUS_MASTER is the only one there is, and it has to
happen before the DMA goes back to the arena -- a dead driver's device
keeps reading a framebuffer the kernel is about to give to somebody
else. Claim sets the bit, release clears it; pcitest shows it in a bm
column, with a third state so a failed read is never printed as off.
* A refusal. vgpu_release() asks vga_fb_restore() whether there is a
framebuffer to put the console back on, and declines to hand over the
device if there is not. The rule that the kernel keeps a minimal
driver for everything on the path to a shell is worth writing down
only if something enforces it.
* The DMA arena not being owned by two allocators at once. This is the
bug that stopped H2: freevm() frees every mapped page below PHYSTOP
and the arena is the top 16 MB of exactly that range, so a DMA block
mapped into a driver went onto the page allocator's free list when the
driver died, while pciuser_release_all() handed the same pages back to
the arena. The restarted vgpud asked for its framebuffer, got pages
kalloc() had already given out -- including its own page tables -- and
dma_alloc()'s zeroing wiped them, so it died inside the ioctl on the
return from a syscall whose stack had stopped existing. do_dma() now
records a VMA with no_free set, the way shared memory does.
* One exit status. KeepAlive must restart a driver that crashed and must
not restart one that has looked at the machine and found its device
absent: on hardware with no virtio-gpu that was fifteen spawns in
forty-five seconds, each printing a line to the console, for ever.
SCHINIT_EXIT_NORESTART is 78, sysexits.h's EX_CONFIG. It is not a new
manifest key -- the wait status has always travelled from PID 1 to the
supervisor, and note_exit() simply stopped discarding it.
The milestone's third clause, "the compositor reattaches", is not done
and is not claimed: there is no compositor running. That is recorded in
the plan as a Schcom milestone rather than counted here.
Closes the register row "A released PCI device" in docs/plan/1.0.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Porting zsh found four defects in the kernel and one in the filesystem. None
of them were about zsh; all of them had been there the whole time.
**exec threw the environment away.** kernel/fs/exec.c wrote a single zero for
envp with the comment "(no environment)" -- not yet, but ever, for every
process. musl has been passing a perfectly good envp to execve (Linux 59, which
SchOS answers) and it was never read. So $TERM was unset, $PATH was whatever
each program invented, and a variable exported in a shell did not survive the
exec meant to carry it. exec() takes an envp, sys_exec reads argument three,
and schinit manifests grew an Environment key. The userland two-argument
exec(path, argv) stays as a wrapper that passes null explicitly -- the raw stub
is execve now, so a short caller cannot leave %rdx holding a stray pointer.
**Which overflowed the kernel stack.** Three pointer arrays, ~1.8 KB, on a
4096-byte stack, under exec -> loaduvm -> readi -> SchFS -> btree. Pid 1 went
down on the first exec. The canary caught it and named the process, which is
what it is for. They live in one kalloc'd page now.
**waitpid returned a bare -1** for both "no children" and "interrupted". musl
reads [-4095,-1] as -errno, so userspace saw EPERM; zsh printed "wait failed:
operation not permitted" and abandoned the rest of /etc/zsh/zshrc. -ECHILD and
-EINTR now. Third time a bare -1 has cost real time -- on a system with no
permission model, EPERM should be read as "a syscall returned -1".
**NVMA was 64.** musl's allocator takes a mapping per size class and does not
release them eagerly, so compinit ran out of slots and got -1, which is EPERM,
which malloc turns into NULL, which zsh reports as "fatal error: out of memory"
-- on a machine with 1000 MB free. 256 slots, and -ENOMEM.
**And a small write to SchFS costs 58 ms.** 200 writes to one open file take
11.75 s; the same to /dev/null take 0.14 s. That is the design stated at the
top of kmount.c -- one transaction group per operation, and a commit is two
flushes and an uberblock -- not a bug. But compdump writes its digest with
thousands of separate prints, so it takes minutes and looks like a hang.
compinit -D, which skips the dump, finishes in 3.6 s. This one is a decision
rather than a fix, so it is written up and left: /etc/zsh/zshrc keeps compinit
switched off and explains exactly why, with the measurements.
zsh runs as /bin/zsh and is the console shell. ZLE works -- arrow keys recall
history through terminfo, $COLUMNS reads the real 160 because TIOCGWINSZ was
fixed, colour and prompt expansion work, startup is 0.14 s. mksh keeps /bin/sh,
so schinit's no-jobs fallback is a different program from the one that could
have failed.
Also fixed while here: AT_CLKTCK was the literal 100 and is USER_HZ; the
extract rule in four ports could move a source tree inside itself when make
re-ran it, which is how zsh's configure came to write modfile=zsh-5.9/... into
config.modules and fail three steps later.
schfs-check passes. Full writeup in docs/history/kernel.md section 14.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The manifest described its own fields by naming the thing they were
modelled on -- "in launchd terms this is a RunAtLoad + KeepAlive
daemon", and ThrottleInterval attributed to launchd by name. The design
debt is real and recorded in docs; a file shipped in /etc is not the
place to keep citing another system's trademarks.
What the fields do is unchanged, and so is every value. The comment that
survives says what the interval guards against, which is the part a
reader of this file actually needs.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Milestone 1 of three: manifests, RunAtLoad, KeepAlive with throttling,
and reaping. Replaces the hardcoded fork-a-shell loop in cmd/init, which
stays in the tree for now.
Jobs are sectioned key=value files in /etc/schinit/*.job, kept in the
repo under etc/ and installed into the sysroot -- sysroot/ is generated
and gitignored, so anything written only there is lost on a fresh clone,
which is already true of /etc/passwd and should not become true of the
boot configuration. Unknown keys and sections are ignored rather than
fatal: a manifest written for a newer schinit must not stop this one
booting the machine.
Socket sections are parsed and recorded but not yet held. That is
milestone 2 and it is the whole reason for copying launchd rather than
sysvinit -- the supervisor holds the listener and starts the job on first
connect, which inverts the dependency graph and makes runlevels a
non-concept. The key exists now so manifests need not change later.
getdents64 is exposed to userland for this. The kernel has had it since
the Linux ABI landed, but nothing declared it in user.h or lib/usys.S, so
first-party programs had no way to list a directory at all.
Two things found by testing rather than reasoning:
- setsid() gives a job its own session, and a session has no
controlling terminal. The console then delivers input only to the
foreground process group it tracks, so the shell came up, echoed
every keystroke through the line discipline, and executed none of
them -- indistinguishable from a hung shell. ControllingTerminal=yes
claims it with TIOCSCTTY/TIOCSPGRP; off by default, since a daemon
has no business seizing the console.
- the first bootstrap() dropped /dev/input/event0-1 and most of /proc,
because it was transcribed from the part of the old init that had
been read rather than all of it. -Evdev caught it.
build/usbstick.img is built by `all` now: without it QEMU refuses the
-drive and the entire -Usb run produces no output, which reads as a
broken USB driver.
Seven suites green: base 27, Tty 51, Ps 32, Sock 64, Fb 36, Usb 31,
Evdev 29. make schfs-check passes.
Nexoniarz