Started as "fix the ASAN leak in schfs_objtest" and the test turned out to be
the messenger. The allocation map was taken through a palloc callback and there
was no way to return it: no schfs_space_release, and a comment in
schfs_space_init reading "caller frees what was taken" for an API the caller
did not have.
Three separate leaks from that one gap:
* The kernel leaked the entire map on every unmount -- up to 2 MB, at 8 KiB
per GiB of volume -- because kmount_unmount flushed, cleared `mounted` and
walked away. This is the one that matters; the others are test-only.
* schfs_space_init stranded a page on its own error path. npages was raised
only after *both* of a pair of allocations succeeded, so a failure on the
second left the first outside the count -- unreachable to any cleanup that
could later exist.
* schfs_objtest leaked 2121728 bytes in 518 allocations, which is what made
the whole SchFS suite exit non-zero regardless of its assertions.
The map now carries its own pfree rather than taking one at release time, so it
can only ever be freed by the allocator that filled it -- the kernel's pages
come from kalloc and a host tool's from calloc, and the two are not
interchangeable. schfs_vol_open and schfs_vol_format release any map the volume
is already holding before building another, which is what stops a re-open
leaking; struct schfs_vol must therefore be zeroed before first use, and the
header now says so.
The test's own leak was the last one found and the simplest: it does
memset(&VOL, 0, sizeof(VOL)) before reopening, which wiped the map's pointers
before vol_open could release them. Eight of those, each now releasing first.
schfs_objtest asserts the balance -- 520 pages taken, 520 given back -- because
a suite that leaks cannot detect a leak: the filesystem's own allocations would
arrive as noise inside the harness's. The next one fails the run instead.
make schfs-check now exits 0. The 31 UBSAN misalignment reports are still
there and are still a Gate 0 item.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
uber_valid() answered one question -- valid or not -- and a version mismatch
returned the same as a failed checksum. Those two states need opposite handling:
A damaged uberblock means STEP OVER IT. That is what the 128-slot ring is for,
and the older root is a consistent filesystem. This is crash recovery.
A sound uberblock from a newer format means STOP. Falling back mounts a STALE
filesystem: every commit made since the volume was upgraded is discarded, the
mount reports success, and nobody finds out.
Demonstrated rather than asserted. A forged image with two uberblocks --
(version 1, generation 1, root 129) and (version 2, generation 2, root 130) --
made the old code mount root 129 and exit 0, silently rolling the filesystem
back to before the upgrade.
uber_check() returns BAD / OK / RO / TOO_NEW, and asks its questions in order:
is it ours (magic), is it intact (crc), can we read it (version, features), does
it make sense (root in range). Compatibility is asked before sanity on purpose --
the fields a sanity check reads are only meaningfully placed if the format is one
we know.
Plus feature flags in three classes, which is what stops a version number being a
blunt instrument: compat (ignore unknown bits), ro_compat (mount read-only),
incompat (refuse). The test for which class is one question -- what happens if a
driver that does not know this feature writes to the volume? Nothing -> compat.
Something goes stale -> ro_compat. Something is unreadable -> incompat.
They occupy what was reserved0, so every later field keeps its offset and
existing images -- which have zeros there -- read unchanged. schfs_vol_commit
memsets the uberblock before filling it in, which is why v1 volumes already say
"no features" without having been written by code that knew the field existed.
That trick is available exactly once. Four _Static_asserts now pin the layout.
Verified on forged images: version bump refuses, incompat refuses, blocksize
mismatch refuses, ro_compat mounts the NEWEST root read-only rather than falling
back.
Also here, because they are the same file: SchFS's transaction owner is a pid
alongside the pointer, since a bare struct proc * does not identify a process --
ptable slots are recycled, and an exited owner's pointer compares equal to
whichever unrelated process lands in that slot next, at which point klock() skips
the lock entirely and two callers share one volume's scratch pages. And
schfs_lockinfo(), so /proc/fsstat can report a wedged volume instead of leaving
every path asleep in acquiresleep with no way to ask why.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The last three phases of the filesystem, which were written together and
touch the same files throughout -- kmount.c, objw.c and vfs.c are each
rewritten by all three -- so they land as one commit rather than three
that could not be built separately.
Durability. A transaction that reaches the platter out of order is worse
than one that never reached it: the uberblock can name a tree whose
blocks are still in the drive's write cache. bdirty/bflush give the
buffer layer an explicit barrier, ideflush issues ATA FLUSH CACHE and
usb_storage_flush the SCSI SYNCHRONIZE CACHE that means the same thing,
and a commit now waits for the data before it writes the root that
points at it. The uberblock groups are read newest-first with fallback,
so a volume whose newest roots are torn mounts at an older one and says
which generations were lost.
Reflink. Extents carry a refcount, so two objects can name the same
blocks and neither frees them while the other holds them. Exposed as
FICLONE -- Linux's ioctl value, so `cp --reflink` works unmodified --
and as cmd/reflink for the case where there is no cp to hand.
Attributes, and the one genuinely new idea here. attr.c stores named
values on an object, reachable through setxattr/getxattr/removexattr at
Linux's syscall numbers. On top of that, schfs_index declares an index
over an attribute name and schfs_query answers "which objects carry this
value" from the B-tree rather than by walking. A query against an
unindexed attribute is refused with an error, never silently answered by
a full scan: a query that quietly becomes a scan is worse than one that
admits it cannot help. cmd/schattr drives both.
Three bugs fixed on the way, each found by the numbers being wrong
rather than by inspection:
- statfs's f_fsid was declared int64[2]. Linux's fsid_t is two *ints*,
so every field after it landed one slot late: userland read f_frsize
out of f_namelen, got 255, and df reported a 32 MB root filesystem
as 1992 KB. It hid for as long as it did because the fields used to
be invented constants, so wrong numbers looked like the usual ones.
- struct inode's nlink was a short against SchFS's uint32, so a file
past 32767 names came back negative -- and iput frees an object
whose count reaches zero. It is an int now, signed on purpose, so an
underflow lands somewhere a check can see rather than wrapping.
- filewrite split every write to fit v1's log. That limit belongs to
the journal, not to writing, and SchFS makes one transaction of
whatever it is handed: a 1 MB write was becoming 170 commits and
170 flushes for nothing. fs_ops carries max_write now, and SchFS
sets no limit.
Also here: a real mount table, so `mount -t schfs /dev/hdb /mnt` shows
up in /proc/mounts -- df looks a path up there before it calls statfs at
all, so a mount missing from that list was invisible to it -- several
volumes mounted at once, snapshots mounted by name, and /proc/fsstat
with an rdtsc-based counter, which is the only instrument fine enough to
see inside a single syscall.
Verified: `make schfs-check` passes in full, including the sweep that
crashes the volume at each of 119 points mid-transaction and requires
every one to mount with exactly its committed data, and the case where
both newest uberblocks are rubbish and the volume still comes back. The
headless boot check passes with 27 [ok] and no failures, on a SchFS root.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two loose ends from the mount-by-name commit, both closed.
A slot is a device number, so supporting more than one snapshot is a
small array rather than a redesign: SCHFS_SNAP_DEV through
SCHFS_SNAP_DEV + SCHFS_SNAP_SLOTS - 1, each with its own volume and its
own scratch pages, allocated on first use. Four of them -- "one at a
time" is an odd thing to have to explain, and the cost is two pages per
slot. Not many, because each one is a device number and those are a
small fixed space.
The leak mattered more. umount removed the mount table entry and left the
slot marked in use, so a snapshot could be unmounted and then never
mounted again until reboot. sys_umount2 releases it now, keyed off the
device it already has in hand.
Verified in the running system: two snapshots mounted at once, both
readable, both unmounted, and a third mount afterwards succeeds and reads
correctly -- which is the case that failed before.
schfs-check passes; bootcheck 108 [ok].
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`mount -t schfs @golden /mnt` mounts a snapshot. The source argument
finally means something: sys_mount ignored it outright, because there was
one volume and nothing to choose between. `@name` rather than a path
because a snapshot is not a device -- there is no node in /dev for it and
there should not be, since it lives inside the volume already mounted.
A second volume rather than a parameter threaded through all 23 schfs_k*
entry points. Only the read side can ever address it, so the write path
keeps talking to the live volume and needed no change; the four read
entry points grew _dev variants and pick the volume from the device the
inode already carries. One fs_ops table serves both, because every entry
takes an inode and dispatches on it -- a second table would be the same
pointers under a different name.
It needs its own device number: a snapshot's object ids are the *same
numbers* as the live tree's, so one device would make the two views alias
in the inode cache and hand a reader whichever was cached first.
Three things this turned up, none of them new but all of them reachable
for the first time:
- sys_mount refused with `dev == SCHFS_DEV`, meaning "do not mount SchFS
onto SchFS". A snapshot's mount point is necessarily on the live root,
so that refused the entire feature. The real condition is mounting a
device onto *itself*, which is `dev == fsdev`.
- createat allocates an inode and then panics if dirlink fails --
reasonable about a writable filesystem, a crash on a read-only one.
The refusal now happens before anything is allocated. Unlink and
rename already handled a refusal properly.
- a refused create reported ENOENT, so writing to a snapshot said "No
such file or directory" -- the sentence a shell prints for every
create failure. It reports EROFS now.
Verified in the running system against an image built with
--snapshot golden: the mount succeeds, ls lists the snapshot's tree,
/mnt2/etc/motd reads back through it, and a write is refused with
"Read-only file system".
One at a time, and no umount path for it yet: mount_del_by_root removes
the mount table entry, but ksnap_unmount is only called on the failure
paths. schfs-check passes; bootcheck 108 [ok].
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
SchFS is a 64-bit format addressing 64 ZB. The stack under it was not,
and the lowest limit was three orders of magnitude below the one anybody
would have guessed:
ide.c panicked on any block >= FSSIZE -- 150000 blocks, 614 MB
ide.c computed the sector in an int, and addressed it with LBA28
bio.c took a 32-bit block number, capping any device at 16 TB
schfs refused blocks past 0xffffffff, mirroring the cache
The FSSIZE check is the one that mattered. FSSIZE describes the size of a
v1 filesystem *image*; it had no business bounding a physical device, and
it meant a disk larger than half a gigabyte panicked the kernel rather
than being read.
struct buf's blockno is uint64 now, and so is bread's. idestart computes
the sector in 64 bits and picks LBA48 when it does not fit in 28 -- per
request, so everything that fits stays on the LBA28 path every existing
image has been read through. The 48-bit registers are written high half
first, because each is a two-deep FIFO and the other order leaves the
drive addressing whatever the low bytes alone describe.
Verified with a 2 GB disk carrying a marker at 1 GiB -- block 262144,
well past the old panic at 150000. The guest reads it back:
"MARKER-PAST-THE-OLD-LIMIT". schfs-check passes including the round-trip;
bootcheck 108 [ok].
Two limits deliberately left, both noted rather than guessed at: raw
/dev/hdN access still goes through devsw's 32-bit offset, so a raw device
is addressable to 4 GB; and usb_storage computes a 32-bit LBA, which is
what SCSI READ(10) carries -- READ(16) is a different command, not a
wider variable.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz