The RTL8168 is now driven by Linux's r8169, unmodified, in a process.
`make ldls-r8169` stages it from the running kernel together with libphy,
mdio-bus, mdio_devres and the Realtek PHY driver, the kernel's BTF and
the RTL PHY firmware, and etc/schinit/ldls-r8169.job starts it at boot
with its log in /var/log/ldls-r8169.log. The native driver is out of the
registry; its code, now with Linux's 8168H setup, stays as the fallback.
LDLS grows what that needed:
- ldlsd loads a comma-separated module set in dependency order, each
linking against the ones before it, with BTF read before any
init_module runs;
- a driver core (bus match, driver probe), devres, kernel printf, real
udelay/msleep/ktime and 1000 Hz jiffies, phylib's bitmaps and
link_mode_params, firmware from /lib/firmware, and the symbols whose
stub zero was a lie (list validity, try_module_get, dev_err_probe,
eth_platform_get_mac_address);
- pdev->bus is a real pci_bus, and cmovcc from per-CPU memory is
rewritten like the other %gs forms.
In QEMU all five modules load, link and initialise, and r8169 registers
and finds no device. Probe and traffic are untested until real hardware.
The kernel turns ASPM off on Realtek NIC links at boot, as r8169 does
through pci_disable_link_state, which a process cannot.
Idle CPUs enter ACPI _CST's C2 (CC6 on Zen) by port read or MWAIT when
the APIC timer keeps running, instead of only ever halting at C1.
docs/plan/gpu.md: amdgpu and nouveau through LDLS, with measurements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1giNvrHTrPMPw7V6x1kQ4
Nexoniarz is the sole author and SchOS was never published under
Apache-2.0, so this is a straight relicence. LICENSE is the FSF GPLv2 text,
every first-party SPDX header moves to GPL-2.0-or-later, and NOTICE,
README.md, docs/licensing.md and the site say so. projects/schfs-linux
follows the rest of the tree.
The GPL gives copyleft: a fork has to ship its source. It also lifts the
old "Linux drivers, never" rule, since GPL-2.0-only code combines with
GPL-2.0-or-later. "Or later" leaves room for GPLv3, but one binary still
has to pick one version, so docs/licensing.md now keeps Apache-2.0 and
GPLv3 code out of the kernel to keep Linux code possible there. BSD
4-clause code goes from "avoid" to "no", because the advertising clause
is GPL-incompatible.
LDLS still ships no .ko. That boundary is now project policy rather than
a legal requirement, and ldls.md, devices.md and licensing.md section 6
say so. refmod declares license=GPL, and ldls-check passes (27 checks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
L4 was listed as "free -- H2 built all of this" and never actually tested,
which is a claim rather than a result. Tested now, and it holds:
ldlsd running ping 2/2; holds index 7 and DMA slots 3 and 4
killed interface DOWN, device released, bus mastering
cleared, DMA reclaimed -- back to vgpud's 3 blocks
ping fails honestly: sendto: -5
a second ldlsd ping 3/3, and the arena hands back the same addresses
pciuser_release_all() and netuser_release_all() sit beside each other in
exit() for the same reason, and that they apply unchanged to a foreign driver
is the whole point of having built them against our own.
With that, every milestone on ldls.md is done, so it leaves docs/plan/ for
docs/architecture/ -- the rule docs/plan/README.md states and the one that
keeps the two directories meaning different things. The new document describes
what is, not what was planned: the five rules, the four pieces, what it costs
(polling, no stack protector, locks that are no-ops), that it can be killed,
and a "what it does not do" that leads with one driver, one kernel version,
tried once.
Sixteen source files pointed at docs/plan/ldls.md and would have been dangling
the moment it moved. All repointed, and the milestone references -- which the
architecture doc deliberately does not have -- rewritten to name sections
instead, so a reader lands somewhere real.
The register row closes with it. hybrid.md freed a slot, ldls.md took it, and
it is now free again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/ldls.md milestone L1. Every undefined symbol resolves to a
trampoline -- twenty generated bytes that load the symbol's index and jump to
a shared thunk, which saves the argument registers and reports the call. Then
init_module is simply called.
$ ldls-run 8139too.ko
module 8139too
license GPL
wants 94 symbols
calling init_module at 0x416fc020
1 _printk(0x416fb6c0, 0, 0)
| 8139too: 8139too Fast Ethernet driver 0.9.28
2 __pci_register_driver(0x416fb400, 0x416fff80, 0x416fbdbb)
init_module returned 0 after 2 stub call(s)
That second line is the driver's own banner, printed through a _printk that
is ours, from a string in the module's own .rodata that a relocation put
there. There is no stronger evidence that a load worked than the loaded thing
speaking.
Stubs return zero rather than stopping, which departs from what the milestone
originally said and does so deliberately: stopping at the first call tells you
one name, carrying on tells you the sequence, and the sequence is the thing a
symbol table cannot give you. A driver that then dereferences the zero faults,
and that is a result too -- it says how far it got before it needed the kernel
to have really done something.
The first run failed on neither of those. It failed on a relocation:
ldls-run: relocate: a signed 32-bit relocation does not fit
A module is compiled -mcmodel=kernel, so the compiler emits R_X86_64_32S for
anything it believes lives in the top 2 GB, and an ordinary mmap at 0x7f...
has nowhere to put it. Linux gives modules a region within 2 GB of the kernel
text; the harness uses MAP_32BIT to reach the same window from the other end.
On SchOS this costs nothing -- a process's mmap area starts at 0x40000000 and
is already inside it -- but it is a real constraint on where the host may load
a module, and a loader that did not check its own arithmetic would have found
it much later and much more confusingly.
Swept over 500 stock modules: 449 ran init to completion, 22 faulted on a
stub's zero, 29 have no init_module, and zero hit a loader error.
Recorded honestly in "what it will not do": running init is not working. Every
symbol is a stub, so what has been shown is that drivers ask for things in a
readable order, not that anything answers. Also recorded: every undefined
symbol in a module is NOTYPE, so the stubs cannot tell jiffies from
pci_iomap and both get a trampoline -- BTF distinguishes VAR from FUNC and
that is where the fix belongs rather than in a guess.
make ldls-check is 23 checks now, five of them L1's, all against
ldls/test/refmod.c which is ours and now has an init_module of its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
