vgpud: wanted 7365 KB of DMA memory for a 1920x982 framebuffer
vgpud: not enough contiguous DMA memory
schinitd: restarting os.schos.vgpud (and again, and again, until
schinit: supervisor stopped answering schinit replaced schinitd)
Every number in that diagnostic was about the arena, and the arena had 61 MB
free. The refusal came from do_dma()'s per-request cap, which was 4 MB --
exactly one framebuffer at 1280x800, chosen when that was the only thing
anybody asked for.
virtio-gpu's display size is the size of the **host's window**. Drag it out and
the guest is asked for 1920x982x4 in one contiguous piece, and no amount of
free arena helps. 32 MB now, which is 2560x1600 with room over. The cap is not
there to ration memory -- the arena does that and says so properly -- it is
there so a wild size cannot ask for everything by accident.
DMA_ARENA_BYTES 16 -> 64 MB alongside, for the reason its own comment already
gave and then got the arithmetic wrong on: either side of the handover *both*
drivers hold a framebuffer, so the requirement is two at the largest mode, not
one. 16 MB is two at 1280x800 and nothing bigger. Verified booting at 256M and
512M as well as 1G.
And vgpud no longer dies when it cannot have what it asked for. It claims the
framebuffer before creating the resource, and if the full size cannot be had it
steps down by thirds to 640x480 before giving up -- and gives up with
SCHINIT_EXIT_NORESTART rather than die(), because a driver that will fail
identically on every restart should not be restarted. That loop is what made
schinit replace the supervisor mid-boot.
vgpud: the display is 1920x1080 but only 1280x720 of DMA could be had
is what it says when it steps down. With the cap raised it does not need to:
1920x1080 now allocates its full 8100 KB, 0 restarts.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The arena hands out contiguous memory -- that is the only reason it exists --
so the number that matters is not how much is free but how big the largest
piece is. First fit spends that number cheaply: a 64 KB ring taken from the
middle of a 16 MB arena leaves two 8 MB extents, and a framebuffer wanting 9 MB
then cannot be had on an arena three quarters empty.
dma_alloc() is best fit now: the tightest extent that holds the request, which
leaves the large ones whole for the requests that have no alternative. O(n)
over a table with a handful of entries, and it cannot fragment worse than first
fit for any request.
And the failure says both numbers, because they point at different fixes and
the old message only had one of them:
dma_alloc: no room for 9216000 bytes -- 12591104 free,
largest contiguous piece 8495104 (`schdbg dma` for the map)
"12 MB free" alone reads as out-of-memory on a machine that has plenty; the gap
between the two is the whole story. A fragmented arena is cured by whoever is
holding the block in the middle letting go, a full one by DMA_ARENA_BYTES.
Also fixes a real bug found while reading it: when the extent table was full,
the tail-split path did `continue` while still holding the lock and having
already committed the extent to the caller -- so it carried on scanning, and
could return a second block or fall through to the failure path having handed
one out. It now returns the block it committed, and says so.
**This does not close the report it came from.** vgpud failing to get a
framebuffer was not reproduced here: at 1280x800 the arena has 8.1 MB
contiguous against a 4 MB request. What is fixed is that the next occurrence
explains itself instead of saying "not enough DMA memory" on an empty arena.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md's first eviction. cmd/vgpud is the virtio-gpu driver as a
process: it finds the device by vendor and device id, asks the kernel for it,
and does the whole virtio 1.0 bring-up from outside -- reset, feature
negotiation, a virtqueue in DMA memory, GET_DISPLAY_INFO, RESOURCE_CREATE_2D,
ATTACH_BACKING, SET_SCANOUT, TRANSFER and FLUSH.
vgpud: virtio-gpu at 00:03.0, currently held by virtio-gpu
virtio-gpu: released to userspace; screen is the VBE framebuffer
vgpud: claimed
vgpud: display is 1280x800
vgpud: scanout is ours, framebuffer at physical 0x3eceb000
vgpud: drew a test pattern from userspace
Verified by screendumping the virtio-gpu head: the pattern is there, with a
checkerboard that would shear if the stride were wrong. The console carries on
in VBE on the other head at the same time, which is the fallback rule from the
plan working rather than being described.
No syscall knows this is a GPU. The kernel handed over a PCI device and the
process decided what it was -- which is the property that makes this a general
mechanism, and the reason the evictions come before anything foreign.
Four things the first real driver needed that the test program had not:
- PCI config space (PCIIOC_CFG). A virtio device says where its registers
are in vendor capabilities, which live in config space, so a driver that
cannot read it cannot find its own registers.
- a way for the incumbent to let go: struct pci_driver gained a release
hook. A driver without one keeps its device, which is always safe and for
anything on the path to a shell is also correct.
- the outgoing driver freeing its DMA. Releasing the device but keeping its
4 MB framebuffer is half a handover -- the incoming driver asks for one and
is told there is no room.
- a 16 MB DMA arena. 4 MB was exactly one framebuffer at this resolution,
and either side of a handover there are two.
And one bug it reproduced on its first working run: vgpud polls the used ring,
so it registered no interrupt handler, and a virtio device interrupts on every
completion. The storm detector said so immediately --
irq 11: 77780 interrupts/second -- a device on this line is not
acknowledging it. handler 'e1000' is attached
-- naming the line, the rate and the neighbour it was drowning. One line fixes
it (VRING_AVAIL_F_NO_INTERRUPT before the queue is enabled), and that detector
was worth every minute it cost.
include/virtio.h moved out of the driver directory. Its own comment said it
should when a second reader appeared; one has.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
