A program that wants to make a sound opens /dev/dsp, writes PCM, and closes
it. That is what UNIX audio has always been and it now exists here:
tone 440 2
Three pieces, in the order a sample passes through them. **/dev/dsp** is a
character device where write() is audio and a handful of OSS ioctls say what
the samples are. **AudioEngine** is everything above a driver that is not
specific to a chip -- the format, whether there is room, and what a write does
when there is not. **A driver** is bound by class, exactly as a display driver
is: device_find_class(DEVCLASS_AUDIO).
OSS numbering rather than something new, because every UNIX audio program ever
written already knows it and the only thing a different set would achieve is
making ports harder. They are read/write ioctls, which is the part that
matters: a program asks for 44100, the device sets 48000 and writes 48000
back, the program resamples. One that ignores the answer plays 9% fast, and
that is its bug rather than the driver's.
**The engine is deliberately one stream.** Mixing several programs is a real
feature with a real design behind it, and building it before anything had
played a single sound would be exactly what docs/plan/1.0.md keeps a register
for: work that exists and is connected to nothing. The second program that
wants to play at the same time is what should cause it to be written.
**audio_wait() sleeps on the timer tick, not on the device.** That looks like
the lazy choice and is not: a ring that drains is a ring with room, so asking
again in ten milliseconds always makes progress, whereas sleeping on the card
makes audio depend on an interrupt arriving. On a machine whose line is
misrouted that is not a stutter, it is a writer that never wakes. The handler
still accounts for finished buffers -- deleting it would cost efficiency, not
correctness -- and it retires descriptors through the same `tail` pointer
queue() uses, so the two cannot disagree about what is in flight.
**AC'97 first because HDA is two unproven things at once.** It is the simplest
audio device that exists on real machines and in QEMU both. Intel HDA is what
the laptop actually has and is a much larger driver; writing it against an
interface nothing had ever played through would have meant debugging the
driver and the interface simultaneously. HDA arrives as a second
struct audio_ops and nothing above it changes -- which is the entire point of
the class.
Two things the wiring needed: PCI class 0x04 now maps to DEVCLASS_AUDIO (the
driver bound and /proc/devices showed it, but audio_get() found nothing,
because the class byte had never been translated), and include/x86.h grew
inw() -- AC'97's mixer is all 16-bit registers and reading one a byte at a
time returns the low half twice on some codecs.
**Tested by measuring what came out, not by not crashing.** QEMU's wav backend
writes the guest's audio to a file; `tone 440 2` produced 1.97 seconds of
44.1 kHz stereo with peak amplitude 14177 against the generator's table
maximum of 14178, and 880 zero crossings per second -- 440 Hz exactly. wav is
on every QEMU target rather than a host backend, because a build machine may
have no sound card and it is the only backend whose output can be checked.
Both supported configurations: one boot each, no traps, no panics, socktest
and memfdtest green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Gate 0's last item, "delete the cell grid" -- done as far as it should be, and
the rest of it retired, which is the part worth explaining.
include/text.h made the case against the grid in four charges: it cannot do
variable-width glyphs, cannot position text off a multiple of eight, cannot
anti-alias, and cannot hold a codepoint above 255. Every one of those was
about the *drawing layer*, and every one is now false -- glyphs carry metrics,
PSOGM positions text at arbitrary pixels, the TrueType path blends 8-bit
coverage, and vtcell.ch is a uint32.
What is left is a grid in vt.c, and deleting that would not modernise the
console; it would stop it being a terminal. VT100 escapes address columns,
TIOCGWINSZ reports rows and columns, and every program that draws a box
assumes both. So the item is checked with its remainder rewritten to say what
was actually wrong, rather than ticked as if the original wording had been
carried out.
**What was actually wrong was the duplicate.** gfx.c walked font_data and
blitted glyphs its own way; text.c did the same job into a struct surface, for
no caller but a sysrq self-test. Two implementations of bearings, coverage and
clipping, which had to agree about a cell size only one of them was told had
changed -- and they did not agree, which is why every line of PSOGM once drew
the next character's bitmap underneath itself.
There is one now, and the mechanism is the pleasing part: the console hands
text_draw_glyph() **the cell as a surface of its own** -- same pixels, same
stride, origin moved and bounds set to that cell. Clipping a tall ascender to
its line is then the same bounds check that clips to the edge of a screen, and
there is no second notion of clipping in the tree. `surface_sub()` is six
lines and replaced fourteen of hand-written comparisons.
The bitmap is reached through font_builtin() like any other provider, so the
early console and the real one are one path with different metrics, and the
`if (!cfont)` branch that walked the array is gone. gfx.c no longer includes
font.h; text.c does, being the only file left that reads it -- which also
retires the note in text.c explaining why it could not.
struct surface gained a bpp, because gfx_draw_pixel handles 16, 24 and 32 and
whatever replaces it has to as well. Zero means 32: a UEFI GOP has no other
format and the loader publishes 32 unconditionally, so callers that do not
care say nothing.
One behaviour change, and it is the documented one: a codepoint the font
cannot draw is now a substituted glyph rather than a blank cell. text.h argues
for that directly -- "a missing glyph that draws nothing makes text silently
shorter and the fault impossible to see".
Verified by screendump: the console renders correctly, PSOGM renders
correctly, and `echo t > /proc/sysrq` still draws its specimen through the
surface path with the back buffer at 32bpp. Both supported configurations: one
boot each, no traps, no panics, socktest and memfdtest green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two things, both asked for.
**The crash report no longer says which monitors it reached.** "The report is
on the virtio-gpu display too" was a line about the crash screen printed on the
crash screen. The report says what happened and where to read it again; that is
not part of it.
**And the second head now shows the F8 menu and the boot.** It used to be black
until vgpud started several seconds into userspace -- through the splash,
through the menu, through every boot message -- which from the outside is
indistinguishable from a display that does not work. Three stages now cover the
whole boot and hand over to each other without coordinating:
*The loader.* LocateProtocol() answers with the first GOP and offers no way to
ask for the rest, so the rest are found by handle and fed the primary's
framebuffer as a Blt source at the points where a screen is finished: the menu,
the resolution chooser, system information, the splash, each segment of the
kernel load. Blt rather than a second framebuffer to draw into, because a
virtio GOP does not have one -- the same fact that made a virtio-only machine
reboot-loop two commits ago.
*The kernel.* gfx remembers which rows were drawn, as one span rather than a
list of rectangles, because console output is lines and a span is what lines
make. display_mirror_console() copies that span across: a line of boot text is
one cell-row transfer, not a screen. Primed once after pci_init(), because a
display that has just appeared has a black scanout and the console it should be
showing was drawn by the loader into a framebuffer it knows nothing about.
*Then vgpud*, from the same console framebuffer, unchanged.
**Two bugs found building it, both worth the retelling.**
The mirror ran per character from inside vt_feed -- which is inside the console
lock -- and vga_disp_acquire() announces its back buffer with a cprintf. A CPU
taking a lock it already holds, with a call chain that said exactly that. It
runs at the end of consolewrite() and cprintf() now, outside the lock, which is
also the better batching: one transfer per write instead of one per character.
And "is this the console's own screen" was asked of the pointer acquire()
returned. vga_fb hands back a back buffer it copies onto the console's
framebuffer afterwards, so on a one-screen machine the answer was "a different
screen" -- and the console was mirrored onto itself through two megabytes of
intermediate, allocated for the purpose. display_ops grew scanout_phys, which
is a fact about the hardware rather than a policy a driver can get subtly
wrong, and it is asked first: it has no side effects and acquire() has two.
Verified with two heads under QEMU, screendumping the virtio head every 400 ms
from power-on: splash, splash, splash, then the console, and it stays. The F8
menu appears on it; choosing 1024x768 there brings both heads up at 1024x768
byte-identical. A panic still reaches both. Both supported configurations: one
boot each, no traps, no panics, socktest and memfdtest green.
One gap remains and is documented rather than hidden: while the kernel's driver
resets the device during probe, QEMU shows "Display output is not active" for a
fraction of a second. A device being taken over has no scanout until the new
driver sets one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
"it also doesn't show crash screen on virtio gpu or just other gpu than default
vga" -- true, and on the virtio-gpu it was worse than nothing. The head kept
showing the console from a second before the panic: one screen saying the
kernel is dead, the other showing a shell prompt.
panic() painted into the console framebuffer and stopped there. Two cases were
missing, and they are not the same problem.
**The kernel still drives it.** display_acquire() hands back a buffer; the
report is copied in and presented. Ordinary, and a no-op when the display
class's buffer *is* the console's, so a one-screen machine does not do the work
twice.
**A process drives it.** The hard one, and the one hybrid.md owed an answer
for. The kernel let go of the device deliberately, and the process holding it
will never run again -- there is no scheduling after a panic -- so there is
nobody left to ask. It is not a race that can be won by being careful.
So the userspace driver says where it is scanning out *in advance*:
PCIIOC_PANICFB, registered by vgpud after bring-up and after every modeset. On
a panic the kernel paints the report into that memory and asks the kernel
driver the device was taken from to put it on screen one last time --
`panic_present` in struct pci_driver, which virtio-gpu implements by resetting
the device out from under a driver that is still nominally running. That is
safe here and nowhere else, because nothing is going to run again.
The panic path allocates nothing. It cannot: a corrupted heap is one of the
ways a machine gets here, and an allocator that deadlocks takes the crash
screen *and* the serial log's last chance to be read. So the driver keeps its
BAR mappings across the handover, rebuilds one queue from 20 KB of static
memory, and bounds every spin -- including the reset acknowledge, which is an
unbounded `while` in probe() and correct there.
**The registration is checked like the promise it is.** The range must lie
inside a block that process got from PCIIOC_DMA on that device. Without that,
a claimed device would be a way to nominate any physical address in the machine
-- page tables, kernel text -- to be overwritten with four megabytes of crash
report at the one moment nothing is left to notice. That is a worse bug than
the one this fixes. It goes away with the claim and with the process.
What it buys is worth stating plainly: a device can be evicted to userspace
without the kernel losing its ability to tell you the machine died. The
alternative was a driver boundary that is also a blind spot.
Verified both ways under QEMU with two heads, `echo c > /proc/sysrq`, and a
screendump of each over QMP:
vgpud holding the device both heads byte-identical, serial says
"The report is on the virtio-gpu display too."
kernel holding it same, via display_acquire/display_present
(/proc/pci shows 1af4:1050 [virtio-gpu])
Both supported configurations: one boot each, no traps, no panics, socktest and
memfdtest green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The TCP/IP stack reached straight into the first driver anyone wrote.
net.c called e1000_present(), the lwIP glue was named netif_e1000.c and
called e1000_transmit(), and include/defs.h declared the driver's
internals to the whole kernel. The second NIC driver would therefore
have arrived with a near-identical copy of the glue file and a patch to
the protocol stack, which is the arrangement include/device.h was
written to prevent -- the e1000 even said so, with `.ops = 0, // no
class vtable yet; there is no net class`.
There is now. A driver publishes a struct netdev_ops -- transmit,
receive, mac, link_up -- and is finished: it never mentions lwIP, and
nothing above it learns its name. The display class was already this
shape; this is the same shape for networking, and the two now read the
same way in kernel/dev/device.c.
What that made possible immediately:
- One netif per bound device instead of one per driver. lwIP's glue is
netif_eth.c, it takes a struct device, and it holds up to NETIF_MAX
interfaces. net.c attaches every network device it finds and starts
DHCP on each, because which interface the network answers on is not
ours to decide.
- /proc/netif lists all of them, one block of fields each, with the
interface name and the driver that claimed it.
- The ARP self-test moved from the e1000 to the class. Nothing in it
was chip-specific, and it is the first thing anyone will want to run
against the next driver. Still `echo n > /proc/sysrq`.
- Private headers live with their driver: e1000.h was in include/,
where exactly one file could use it. The driver build now adds the
driver's own directory to the include path.
The e1000 also drives more than one card. Its probe() refused the second
outright, because there was a single static instance -- so a machine
with two of them drove one and silently ignored the other. Instances are
an array now, and the instance is hung on dev->priv by a new optional
`attached` hook that the bus calls once the device exists. probe() runs
before device_add(), so there was previously nowhere to put it; that is
the whole reason the hook exists rather than a line inside probe.
QEMU gets an explicit NIC on every target (QEMU_NET). The default device
happens to be an e1000 on this machine type today, which is exactly the
sort of thing that stays true until a QEMU release changes it and the
network stops being exercised without anyone noticing.
Verified:
- bootcheck -Net passes, 48 [ok], no failures -- including the moved
self-test and two new checks that /proc/netif names both the
interface and the driver behind it, which together say the stack
went through the class rather than through a driver it was compiled
to know.
- Two NICs attached by hand (-device e1000 twice, second with its own
MAC): eth0 and eth1 both attach, each reports its own MAC in
/proc/netif, and each gets its own DHCP lease. Before this commit
the same machine produced one interface.
- make schfs-check still passes in full.
One trap worth recording: moving a header broke the build for anyone
with stale .d files -- make stopped with "No rule to make target
'include/e1000.h'". CFLAGS gains -MP, which emits a phony target per
header so a moved or deleted one can never wedge the build again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz