Nexoniarz is the sole author and SchOS was never published under
Apache-2.0, so this is a straight relicence. LICENSE is the FSF GPLv2 text,
every first-party SPDX header moves to GPL-2.0-or-later, and NOTICE,
README.md, docs/licensing.md and the site say so. projects/schfs-linux
follows the rest of the tree.
The GPL gives copyleft: a fork has to ship its source. It also lifts the
old "Linux drivers, never" rule, since GPL-2.0-only code combines with
GPL-2.0-or-later. "Or later" leaves room for GPLv3, but one binary still
has to pick one version, so docs/licensing.md now keeps Apache-2.0 and
GPLv3 code out of the kernel to keep Linux code possible there. BSD
4-clause code goes from "avoid" to "no", because the advertising clause
is GPL-incompatible.
LDLS still ships no .ko. That boundary is now project policy rather than
a legal requirement, and ldls.md, devices.md and licensing.md section 6
say so. refmod declares license=GPL, and ldls-check passes (27 checks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
schdbgd ships Disabled, and its manifest explains why: a debugger that can read
the process table should not run on a machine whose owner never asked for one.
That default is right and has one bad consequence -- **the machines that most
need debugging are the ones you cannot get a shell on to enable it.** A laptop
with no serial port that stops before it can draw has nowhere to say why, and
`schinitd enable` needs a prompt that does not exist.
So `make DEBUG=1` adds a sixth entry to the F8 menu. Picking it toggles;
booting carries the choice through SCHBOOT_DEBUG_FLAG; the kernel publishes
/proc/bootdebug; schinitd starts the one job that flag may un-disable, with
the manifest's Args now naming 0.0.0.0 -- a debugger reachable only from the
machine being debugged is no use when that machine is the one that will not
talk to you.
Four decisions, since this is a network-reachable debugger:
compiled out, not hidden A release build cannot set the flag because the
code that would set it is not in the binary. A
menu item that is present and refuses is an
invitation to make it not refuse.
consent at the machine Somebody standing at the keyboard during boot is
the strongest consent this system can ask for and
the weakest one that is any use on hardware that
will not boot.
one job, named in schinitd Not a manifest key like EnableIfDebug: the general
version of "the boot menu starts things that ship
off" is worse than the specific one, and this way
what the flag can start is one readable line.
the kernel only publishes Nothing in the kernel behaves differently, so a
debug kernel and a release kernel are the same
kernel and a bug cannot be the flag's fault.
/proc/bootdebug is its own file rather than a second line in /proc/bootmode,
because bootmode's whole promise is that reading it is a string compare and
not a parser.
**Also: `tone` stopped lying.** On a machine with no sound card it reported
"the device will not take 16-bit samples", which sends you looking at the
format code instead of at the empty PCI slot -- /dev/dsp exists whether or not
hardware is behind it, and the ioctl is where the absence shows up. ENODEV is
now told apart from a format refusal.
Verified end to end: F8 -> item 6 -> boot -> schinitd says it is starting
schdbgd -> a client outside the VM connected to the forwarded port and ran
`dma`, getting the real arena dump back. The release build has no such entry
in the binary at all, and boots clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The first piece of real-hardware work, and it is three bugs that QEMU cannot
show you. The report was an ASUS laptop -- Ryzen 7000-series APU, Radeon
integrated, RTX discrete -- booting to a white underscore on a black screen,
and unable to be offered 1920x1080.
**The framebuffer address was truncated.** The loader handed over
`(UINT32)gop->Mode->FrameBufferBase` and the kernel read a 32-bit field out of
a VBE mode-info block -- a *BIOS* structure the UEFI path had been filling in
because the kernel already knew how to read one. A machine that puts its
aperture above 4 GB, which is ordinary on a laptop with a discrete GPU, got a
plausible-looking address pointing at nothing. The splash went into it, the
kernel was handed it, and the firmware's own cursor kept blinking on an
otherwise black screen. Every step in that sequence succeeded on a number that
was wrong, which is why there is no error message anywhere in it.
SCHBOOT_FB_BASE is the loader's own display block: 64-bit address, 64-bit
size, 32-bit width, height and stride, and the pixel format. The VBE block is
still written for the BIOS loader, but anything that does not fit is left at
zero rather than wrapped -- a truncated address is this bug, and a zero is at
least honest.
The kernel then has a problem the loader does not: its direct map covers the
low 4 GB, so a framebuffer above it needs ioremap(), which needs kpdpt, which
kvmalloc() has not allocated when the early console starts. A low framebuffer
is attached exactly as before; a high one is attached immediately after
kvmalloc(), still thousands of lines before anything else.
**There was more than one adapter, and the first one was taken.**
LocateProtocol answers with *a* GOP and the specification says nothing about
which. QEMU with a stdvga and a virtio-gpu has **three** handles and two of
them are Blt-only with a framebuffer address of zero -- so this is not a
hardware-only hazard, it was a one-in-three chance of drawing into address 0
that happened to keep coming up heads. Every handle is scored now: no
aperture, no candidacy; a readable current mode beats one that needs changing;
size breaks the tie.
**mode_usable() rejected modes real machines have.** A padded scanline (every
GPU that aligns its rows -- and very likely the reason 1920x1080 could not be
offered), a width not divisible by eight (1366x768, which is half the laptops
in the world), and anything below 800x600 (the only mode some firmware gives
over a KVM). All three passed on QEMU, which is why they survived. The mode
list now offers 1366x768 and 640x480 where it did not.
The loader also prints what it found, to the firmware's text console, which is
cleared before the splash: invisible on a boot that works, and the only thing
on the screen on a boot that dies before the splash.
One process note, recorded because it cost a wrong test: `make UEFI_KEEP=1`
ships the loader that is already built. Its own comment says "a build that
quietly ships a stale bootloader is how you spend an evening debugging code
that is not running", and that is exactly what happened -- a regression run
that looked clean had tested the old loader. Loader work gets a full build.
Both supported configurations verified after a clean build: one boot each, no
traps, no panics, socktest and memfdtest green, and the adapter report shows
the right one being chosen out of three.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Gate 0's last-but-one open item. Drop a TrueType file at \schos\console.ttf on
the ESP and the console is drawn with it; with no file, the face linked into
the kernel image, which is what an early panic needs and is not a degraded
mode.
**The loader reads it, and that is the decision worth writing down.** The
kernel opening the file once the root filesystem is mounted is the obvious
design. It is also wrong: the console has been drawing since the kernel's
first line, so a font arriving later changes the cell size, which changes the
column count, which re-lays out every terminal -- and blanks them. The kernel
log would vanish off the screen at the moment the root filesystem mounted,
which is exactly the log a machine being brought up for the first time is
being read for. Since the next thing on the list is real hardware, losing that
was not a trade worth making.
So the choice happens before anything is drawn. Three details make it cheap:
- **EfiReservedMemoryType**, not EfiLoaderData. The E820 handoff turns
loader data into usable memory, on the argument that the loader's own
pages are the kernel's the moment it runs -- true of the loader, not true
of a buffer it wants the kernel to keep reading from.
- **Below 4 GB**, because the kernel reaches this through its direct map and
that is how far the direct map goes. A font above it would need an ioremap
the console cannot do before there is a console.
- **Used in place.** No copy, which matters because the kernel has no
contiguous allocator to copy 112 KB into -- the only one is the DMA arena,
and that belongs to devices.
Sized without EFI_FILE_INFO and its GUID: seek past the end and ask where that
landed, which the specification requires to clamp.
Every failure falls back and keeps going -- no file, implausible size, no
memory, short read, unparseable file. The last says so in the log, because a
font that silently did not load looks exactly like a font that did.
Verified by booting with JetBrainsMono-ExtraBold.ttf on the ESP and
screendumping the console: visibly the bold face, against the Regular of a
boot with no file. Three boots each way, no traps and no panics, socktest and
memfdtest green in all six.
Nothing ships a console.ttf: the file would be the file already in the kernel,
and two copies of a font are two things that can disagree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two bugs on the ExitBootServices path, both invisible under OVMF and both
aimed squarely at real firmware.
The retry did not re-translate. If ExitBootServices returns an error the
loader re-reads the memory map and tries again -- correct, and the
specification expects it -- but the e820 table handed to the kernel was
still the one built from the *previous* map. The retry exists precisely
because the map changed, so the kernel was being given a description of
memory the firmware had already rearranged. QEMU never takes this path,
which is why it survived. Translation is now a function called on both.
Truncation was silent. phystop comes from the largest usable region, so
dropping the tail of the map can leave the kernel believing a large
machine has a fraction of its RAM -- and nothing said so, because the
loop simply stopped at the cap. It now warns while there is still a
console to warn on; after ExitBootServices there is nowhere to report
anything.
SCHBOOT_E820_MAX goes from 32 to 40. The map sits at BASE+0x208 and the
next field is at BASE+0x600, so 1016 bytes are reserved and 42 entries of
24 bytes fit. Real firmware emits far more descriptors than QEMU's; the
headroom was already allocated and unused.
Coalescing adjacent same-type runs is what keeps any of this in budget,
and it works because boot services memory becomes usable at this point --
that is most of the fragmentation in a UEFI map.
110 [ok], no failures, and the map still reads 7 regions under OVMF.
Groundwork for the unified loader: before the two paths can share code,
they have to agree on what they are producing, and until now they only
agreed by coincidence.
Every field of the loader/kernel hand-off was #defined in whichever file
happened to need it -- kernel/core/main.c, kernel/dev/vga.c,
kernel/arch/x86_64/e820.c, boot/bios/cdboot.S, boot/bios/stage2main.c and
boot/uefi/main.c, six copies of the same addresses. schboot.h existed for
exactly this and held only the entry magic and the RSDP slot, with a
comment describing the rest of the block it did not define.
The whole block lives there now: the VBE info fields, the verbose and
media flags (with the real-mode segment:offset spelling cdboot.S needs),
the e820 count, map and cap, and the RSDP. Every one of those files
includes it instead of restating it.
This is not a tidy-up. It is the same hazard as defining the entry magic
twice, only quieter -- nothing breaks until one copy moves, and the two
loaders diverging is precisely what produced the EFER.SCE and RSDP bugs,
where a fix on one path silently did not exist on the other.
Verified on both firmwares: BIOS boots to schinit with the same e820,
ACPI and VGA lines as before; UEFI reaches cpu0 with 1018 MB in 7 regions
and its own 1280x800 mode. `make iso` still builds. bootcheck 108 [ok].
Next: the loaders become starters that gather firmware-specific facts and
hand to one common stage. That needs the BIOS side to climb to long mode
first, since common code can only be compiled for one CPU mode -- which
is the risky part, and is why the contract went first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
find_rsdp() scanned the EBDA and 0xE0000-0x100000. That is a BIOS
convention, and UEFI firmware is under no obligation to leave a copy
there -- OVMF does not. So the kernel found no RSDP, no MADT and no
IOAPIC, and nothing routed IRQ 4. Serial output is polled, so the machine
booted all the way to a shell prompt and then ignored every key, which
reads as a broken console rather than a missing table.
The UEFI loader reads the RSDP out of the EFI configuration table,
preferring ACPI 2.0 for its XSDT, and leaves it at SCHBOOT_RSDP_ADDR --
the same low-memory hand-off block the e820 map already uses, now
described in include/schboot.h so the two sides cannot disagree.
The kernel validates it rather than trusting it: the BIOS path never
writes that slot, so there it holds whatever was in memory, and following
a wild pointer faults before there is anything to report the fault with.
Signature and checksum do that. It deliberately does not require 16-byte
alignment -- that rule is about searching the BIOS area, and OVMF's RSDP
sits at 0x3f77e014, so demanding it threw away the one address this code
exists to use.
UEFI now reports "acpi: 1 cpu, lapic at ..., ioapic id 0" and the ISO
boots to an interactive shell: uname, ls /bin (241), writing and reading
a file, ps, /proc/schfs -- all driven over serial.
BIOS unchanged: bootcheck 108 [ok], same ACPI line as before.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Loads the kernel from the ESP, places its ELF segments, records the
framebuffer, translates the UEFI memory map into E820 entries, exits boot
services, builds the page tables the kernel expects and jumps. Verified
under OVMF: the kernel starts, brings up PCI, VGA, e1000 and the RTC, and
reaches "cpu0: starting".
UEFI structures are written from the specification rather than importing
gnu-efi or EDK II -- a large dependency for two hundred lines of use, and
a licensing question the project does not need to answer. clang emits
PE/COFF directly, so this needs no new toolchain.
The kernel gained a second entry point. The multiboot entry is 32-bit
code that climbs into long mode itself, and firmware that already put us
there would have to drop back down only to climb out again -- a mode
switch whose failure mode is a triple fault with no console. So entry.S
publishes its 64-bit entry the same way it publishes the multiboot
header: a magic to scan for, SCH64BOO, with include/schboot.h owning the
constants so the two cannot disagree. That header goes *after* the
multiboot header, never before: header_addr says the multiboot header
lives at mboot_load_addr, and the BIOS loader computes the kernel's file
offset from it.
The kernel loads its own GDT at that entry rather than the loader doing
it. Arriving in long mode means arriving on the firmware's descriptors,
and the first thing depending on the kernel's own selectors faulted --
"unexpected trap 13 ... cs=38", a long way from the cause.
KNOWN LIMITATION, diagnosed and not yet fixed: e820_init takes the usable
run *containing the kernel*, which under OVMF ends at 8 MB -- the
firmware places an ACPI NVS region at 0x800000, so the run is genuinely
fragmented. The map is truthful and untruncated (21 entries); the
assumption of one contiguous run is BIOS-shaped. The fix is for the
kernel to free each usable region rather than one range, which touches
kalloc and deserves its own change rather than the tail of this one.
BIOS boot is unaffected: 27 checks, no failures.
Nexoniarz