L4 was listed as "free -- H2 built all of this" and never actually tested,
which is a claim rather than a result. Tested now, and it holds:
ldlsd running ping 2/2; holds index 7 and DMA slots 3 and 4
killed interface DOWN, device released, bus mastering
cleared, DMA reclaimed -- back to vgpud's 3 blocks
ping fails honestly: sendto: -5
a second ldlsd ping 3/3, and the arena hands back the same addresses
pciuser_release_all() and netuser_release_all() sit beside each other in
exit() for the same reason, and that they apply unchanged to a foreign driver
is the whole point of having built them against our own.
With that, every milestone on ldls.md is done, so it leaves docs/plan/ for
docs/architecture/ -- the rule docs/plan/README.md states and the one that
keeps the two directories meaning different things. The new document describes
what is, not what was planned: the five rules, the four pieces, what it costs
(polling, no stack protector, locks that are no-ops), that it can be killed,
and a "what it does not do" that leads with one driver, one kernel version,
tried once.
Sixteen source files pointed at docs/plan/ldls.md and would have been dangling
the moment it moved. All repointed, and the milestone references -- which the
architecture doc deliberately does not have -- rewritten to name sections
instead, so a reader lands somewhere real.
The register row closes with it. hybrid.md freed a slot, ldls.md took it, and
it is now free again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/ldls.md milestone L3b. ldls/ko.c, btf.c and stub.c were written
freestanding so they would build unchanged on both sides; cmd/ldlsd collects
that promise -- the same three files, linked against lib/ instead of a libc,
in an ordinary SchOS process.
# ldlsd /lib/modules/8139too.ko /lib/modules/btf
module 8139too license GPL wants 94 symbols
defused 6 %gs stack-guard reference(s)
calling init_module
1 _printk(...)
| 8139too: 8139too Fast Ethernet driver 0.9.28
2 __pci_register_driver(...)
btf 122279 types
layout pci_driver.probe +16 pci_dev 2680 bytes
driver "8139too" devices it claims: 10ec:8139 ... and 18 more
calling probe
1 alloc_etherdev_mqs(0x368, 0x1)
probe returned -12 after 1 stub call(s)
Byte for byte the host harness's behaviour, which is what the shared source
was for. Two earlier predictions came good with no work: a process's mmap area
starts at 0x40000000, inside the window R_X86_64_32S needs, and the kernel
never sets EFER.NXE so every mapping is executable. The second is a gap rather
than a feature and is now recorded as one -- LDLS is relying on the absence of
a protection an OS should have.
One thing did not just work. The first run faulted before probe's first call,
err 5 -- present, read, user -- at a kernel address, with the rip resolving to
mov %gs:0x0(%rip),%rax # rtl8139_init_one+0x26
Modules are built -mstack-protector-guard-reg=gs, so the canary comes through
the GS segment, and that is an ABI between the kernel and its own per-CPU area
which a host that is not that kernel cannot provide. ko_defuse_gs() rewrites
those references to xor %reg,%reg.
There are two forms and the second is easy to miss: the prologue loads the
guard with mov (8b) and the epilogue compares it with sub (2b) before a jne to
__stack_chk_fail. xor is right for both -- it zeroes the saved canary and sets
ZF, so the epilogue's branch falls through exactly as a passing check does. Six
sites in 8139too.
It checks every site before patching any and refuses the whole operation on
anything it does not recognise. That refusal is what found the sub form, by
declining to guess -- a loader that half-understands an instruction should not
be editing it.
make ldls-stage/ldls-unstage put a module and its kernel's BTF into the local
sysroot and take them out again. Not part of `all`, and .gitignore refuses
*.ko, so an image only carries somebody else's GPL code between two commands
you typed on purpose.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/ldls.md milestone L2, less the half that needs /dev/pci.
In Linux, __pci_register_driver ends at the PCI core, which matches a
driver's id_table against the bus and calls probe(). There is no PCI core
here, so LDLS keeps the pointer that call was given and plays the part.
To do that it must know where pci_driver.probe is, and it asks the kernel
rather than being told by us. ldls/btf.c reads /sys/kernel/btf/vmlinux --
122,279 types, every struct layout and every function prototype, as generated
data describing the kernel that is installed. Implemented from
Documentation/bpf/btf.rst, which is a published specification.
$ ldls-types /sys/kernel/btf/vmlinux --need
pci_driver probe offset 16 size 8
pci_dev resource offset 1000 size 1088
resource start offset 0 size 8
all present
Cross-checked against pahole on the same file, field for field. No offset in
this is ours, which is rule 3's uncomfortable row disappearing rather than
being argued about.
And then the driver:
driver name "8139too"
devices it claims: 10ec:8139 ... and 16 more
calling probe(pci_dev 10ec:8139, ...)
1 alloc_etherdev_mqs(0x368, 1, 1)
2 pci_enable_device / 3 pci_request_regions / 4 pci_set_master
5 pci_iomap(pdev, 1, 0)
6..544 ioread8 / iowrite8 -- 0x88, 0x8a, 0x8c, 0x8e, over and over
545 dev_addr_mod / 547 netif_napi_add_weight_locked
549 timer_init_key / 550 register_netdev / 551 netdev_info
probe returned 0 after 552 stub call(s)
10ec:8139 is the real RTL8139 id. It mapped BAR 1, the one marked
IORESOURCE_MEM. Those 538 alternating byte accesses stepping 0x88/0x8a/0x8c/
0x8e are serial EEPROM clocking -- the driver bit-banging the chip for its MAC
address and handing the result to dev_addr_mod. Then NAPI, a watchdog timer,
register_netdev, its "found it" line, and zero.
Fifteen distinct symbols carry that entire probe, and three of them are 540 of
the 552 calls. L1 said 44 symbols carry 110 modules through init; L2 says 15
carry this one through probe. Neither is a number anyone would have guessed
and both came from running the thing.
Recorded as not done, because it is not: probe receives a pci_dev whose shape
is right and whose contents are invented. The BARs are made up, pci_iomap
returns a zeroed page, and 8139too read a MAC address of zeroes and was
perfectly happy about it. The "all through /dev/pci" half of L2 belongs to the
SchOS side. Also recorded: BTF has to come from somewhere, and SchOS has no
/sys/kernel/btf/vmlinux -- the user brings it with the module, from the kernel
the module was built for.
make ldls-check is 27 checks, four of them L2's, and it says so out loud when
it skips them on a machine with no BTF rather than passing silently.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/ldls.md milestone L1. Every undefined symbol resolves to a
trampoline -- twenty generated bytes that load the symbol's index and jump to
a shared thunk, which saves the argument registers and reports the call. Then
init_module is simply called.
$ ldls-run 8139too.ko
module 8139too
license GPL
wants 94 symbols
calling init_module at 0x416fc020
1 _printk(0x416fb6c0, 0, 0)
| 8139too: 8139too Fast Ethernet driver 0.9.28
2 __pci_register_driver(0x416fb400, 0x416fff80, 0x416fbdbb)
init_module returned 0 after 2 stub call(s)
That second line is the driver's own banner, printed through a _printk that
is ours, from a string in the module's own .rodata that a relocation put
there. There is no stronger evidence that a load worked than the loaded thing
speaking.
Stubs return zero rather than stopping, which departs from what the milestone
originally said and does so deliberately: stopping at the first call tells you
one name, carrying on tells you the sequence, and the sequence is the thing a
symbol table cannot give you. A driver that then dereferences the zero faults,
and that is a result too -- it says how far it got before it needed the kernel
to have really done something.
The first run failed on neither of those. It failed on a relocation:
ldls-run: relocate: a signed 32-bit relocation does not fit
A module is compiled -mcmodel=kernel, so the compiler emits R_X86_64_32S for
anything it believes lives in the top 2 GB, and an ordinary mmap at 0x7f...
has nowhere to put it. Linux gives modules a region within 2 GB of the kernel
text; the harness uses MAP_32BIT to reach the same window from the other end.
On SchOS this costs nothing -- a process's mmap area starts at 0x40000000 and
is already inside it -- but it is a real constraint on where the host may load
a module, and a loader that did not check its own arithmetic would have found
it much later and much more confusingly.
Swept over 500 stock modules: 449 ran init to completion, 22 faulted on a
stub's zero, 29 have no init_module, and zero hit a loader error.
Recorded honestly in "what it will not do": running init is not working. Every
symbol is a stub, so what has been shown is that drivers ask for things in a
readable order, not that anything answers. Also recorded: every undefined
symbol in a module is NOTYPE, so the stubs cannot tell jiffies from
pci_iomap and both get a trampoline -- BTF distinguishes VAR from FUNC and
that is where the fix belongs rather than in a guess.
make ldls-check is 23 checks now, five of them L1's, all against
ldls/test/refmod.c which is ours and now has an init_module of its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz