"Ą Ę Ś Ł Ż" drew as "?????" and the obvious diagnosis -- the font has no
glyphs for them -- was wrong twice over. `struct vtcell.ch` was **one byte**
holding a CP437 index, and the console mapped UTF-8 down to it on the way in.
U+0104 does not fit in a byte. No font could have fixed that; the cell had to
get wider first.
So: `ch` is a uint32 codepoint, the mapping on the way in is gone, and the cell
draws through kernel/dev/ttf.c against JetBrains Mono linked into the image.
Cell size comes from the font's measured advance instead of a hardcoded 8x16.
The grid costs 864 KB of BSS instead of 432 KB, which is the honest price of
holding a codepoint per cell for six terminals at 240x75.
The rasteriser needed three fixes before it could be trusted with this.
**21 KB of locals on a 4 KB kernel stack.** `ttf_render` held an outline (512
points as three arrays) and a raster (1024 edges) as automatics. KSTACKSIZE is
4096. They walked off the bottom of the stack into whatever was underneath,
which surfaced as user processes faulting on addresses they never touched and
then a panic inside freevm() on an overwritten page directory. Nothing pointed
anywhere near a font.
**And then again, recursively.** load_outline() held a 4736-byte outline as a
local *and recursed* for composite glyphs. Composite glyphs are exactly Ą, Ę,
Ś, Ł, Ż -- so the second crash arrived the moment the first fix let Unicode
reach the screen, looking like a fresh bug. Now a static outline per recursion
level with a depth cap of 4 (the font's deepest real nesting is 2), and the
leaf parse split into load_simple() so its 512-byte flag array is not
multiplied by the depth. Worst chain measured from the object file: ~2.3 KB.
Neither showed in tools/ttftest, which has an 8 MB stack. That is the standing
hazard of one source file built for host and kernel: the host is most forgiving
about exactly the resource the kernel is strictest about.
**Component transforms were being skipped**, on the stated theory that a wrong
transform is worse than none. It is not. `‘` in this font is the comma glyph
with a scale of -1 -- a 180-degree rotation -- and the offset that ships with
it only lands correctly after the rotation. Without it the mark went twelve
pixels into a ten-pixel cell and was clipped away entirely, so the character
read as missing from the font rather than as misplaced. F2Dot14 2x2 now, with
SCALED_COMPONENT_OFFSET honoured.
The glyph cache was ASCII-only, so every accented letter re-rasterised on every
repaint: a screenful of Polish did hundreds of bezier flattenings per scroll
where the same screenful of English did none. 95 reserved ASCII slots plus 224
shared slots keyed by codepoint, 64 KB pool. Verified 13680 cached renders
byte-identical to direct ones across collisions and a pool flush.
tools/ttftest speaks UTF-8 now. Iterating bytes meant it could only ever ask
for ASCII, and ASCII is entirely simple glyphs -- it could not reach the code
path that mattered.
Also: resolvconf's success line moves behind /proc/bootmode, same rule as
vgpud. A quiet boot opened with "resolvconf: nameserver 10.0.2.3" where the
one line was supposed to be "Welcome to SchOS!". Failures stay loud.
Verified on screen, not just on the host: Ą Ę Ś Ł Ż ć ń ó ź, Ω λ π Œ Ð Æ ß,
∞ ‘x’ → ≤ all render, panic=0 across four boots.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The sweet spot was available the whole time and I ruled it out by writing
"AltGr+anything" when the true statement is "AltGr+*letter*".
A Polish layout wants AltGr with a letter -- ą ć ę ł ń ó ś ź ż. AltGr with a
function key produces nothing on any layout, no window manager binds it, and
no application asks for it. It is the one combination the host, applications
and the keyboard layout all leave alone, and the previous three commits talked
themselves out of it on a technicality that was mine, not the hardware's.
Verified rather than argued, with QEMU sendkey and screendump hashes:
AltGr+F2 -> tty2
AltGr+F1 -> back, pixel-identical to the start
AltGr+a -> reaches zsh, so ą still types
That distinction is only expressible because Right Alt became its own modifier
bit two commits ago. Sharing ALT is harmless for typing -- neither is used to
look up a character -- and made this impossible to say.
Also added, since it was asked for in the same breath: minus and equals step
to the previous and next terminal, on whatever the chord's modifiers are. They
skip terminals that are not in use -- the same `opened` count VT_GETSTATE
reports -- because six terminals with two shells on them means four blank
screens in between, and cycling past those is worse than not having the key.
AltGr+= -> tty2, again -> wraps to tty1 (only two in use)
AltGr+- -> tty2
chvt -c still moves all of it, and `chvt` reports both halves.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+1..6 was a worse choice than the Alt+F-keys it replaced, and the reason
is the one that matters: anything the kernel swallows is taken from every
program that will ever run here, permanently.
Alt+<digit> is Meta-digit. zsh's own line editor binds it as digit-argument --
Alt+1 Alt+2 x repeats x twelve times -- and every readline editor does the
same. Yesterday's chord broke that system-wide, which is exactly the failure
mode of picking a chord applications want.
Working the whole space instead of one axis of it:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6
APPLICATIONS want Alt+anything (Meta), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter -- Polish diacritics
Ctrl+Alt+Shift+F1..F6 is in none of those sets. Display managers bind the same
chord without Shift, so adding it steps out of the host's way, and no terminal
application binds a triple-modified function key.
Which chords actually reach a guest was measured rather than assumed: a
temporary probe in kbdgetc logged every modified keypress and QEMU's sendkey
fired each candidate at it. Everything reached the guest, Ctrl+Alt+F2
included -- so that conflict is the host's display manager, not QEMU. The same
probe corrected an earlier claim: `sendkey altgr-2` produces no event at all,
so the previous commit's "AltGr+2 did not fire" was never actually tested.
And the escape hatch is real now. VT_SETMODE was accepted and ignored, so a
program could ask to own the chord, be told yes, and still not get it.
VT_PROCESS genuinely stops the kernel switching. Together with the EVIOCGRAB
path -- which kbdgetc already checks before the chord is recognised -- there
are three honest layers: nothing, VT_PROCESS, exclusive grab.
What VT_PROCESS still does not do is the VT_RELDISP handshake; struct vt_mode
carries relsig/acqsig for when Schcom needs to release the GPU before the
screen changes hands.
Verified by screendump hash: Alt+2 reaches zsh as Meta, Ctrl+Alt+F2 and
Ctrl+Shift+F2 leave the screen untouched, Ctrl+Alt+Shift+F2 switches.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+F1..F6 was wrong in three separate ways, and the third is the one that
matters most here.
Alt+F4 the host window manager closes the QEMU window
Alt+F2 GNOME and KDE open a run dialog
Ctrl+Alt+F1..F6 the host switches its *own* virtual terminals
AltGr+anything Polish diacritics -- a c e l n o s x z with their marks --
and on some setups AltGr is delivered as Ctrl+Alt
Ctrl+Shift+key widely bound inside applications
Scroll Lock not present on many keyboards
Alt+1..6 survives all of it: the number row, so no function key is involved,
and left Alt, so AltGr is untouched.
Right Alt is tracked as its own modifier bit now. It used to share ALT, which
is harmless for typing -- neither is used to look up a character -- and wrong
for chords, because it made AltGr indistinguishable from Alt.
And the test is an equality rather than a mask:
if ((shift & (CTL | SHIFT | ALT | RALT)) == ALT && ...)
`shift & ALT` fired on Ctrl+Alt+1 and AltGr+1 as well, so a chord aimed at the
host -- or an ordinary Polish keystroke -- would have switched terminals
behind your back. That was a real bug in what shipped yesterday.
Verified with QEMU's sendkey, comparing screendump hashes:
start (tty1) 86cee2284878
Ctrl+Alt+2 86cee2284878 identical -- did not fire
AltGr+2 86cee2284878 identical -- did not fire
Alt+2 114562804a78 switched
Alt+1 86cee2284878 back, pixel-identical to the start
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Three symptoms, two causes, both in the terminal layer.
**The grid and TIOCGWINSZ disagreed about the size.** vt_init() sizes every
grid from gfx_cols()/gfx_rows(), and it runs at main.c:75 -- while the display
driver attaches its scanout from the PCI bus walk at main.c:99. So the grids
were the 80x24 fallback, and TIOCGWINSZ, which computed its own answer live,
said 160x50.
That one disagreement produced all three things visible in the report: text
stopped two thirds of the way down the screen, `ls` laid out 160 columns into
an 80-column grid so words split across the wrap ("vers" / "ion"), and zsh's
cursor tracking was wrong on every line.
Fixed in two places, because either alone would leave the trap set:
gfx_attach_scanout() now calls vt_resize(), so the grids learn the real screen
the moment there is one; and TIOCGWINSZ reports v->cols/v->rows rather than
measuring again. One number, from the terminal being asked.
**Wrapping was eager.** A glyph printed in the last column moved the cursor to
the next line immediately. Real terminals set a pending-wrap flag and wrap when
the *next* glyph arrives -- which is why a line exactly as wide as the screen
takes one row and not two, and why a program can write the bottom-right cell
without scrolling.
zsh's partial-line marker depends on that rule directly: it writes exactly
COLUMNS-1 spaces and expects to still be on the line. With eager wrap it left a
reverse-video '#' above every prompt, which is the hashtag in the report. Both
are gone.
Verified by screendump: `ls /proc` now fits one line with "version" intact, no
markers, and output fills the screen to the last row. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz