SchOS/boot
Repository files (latest commit first)
Filename Latest commit message Latest commit date
Nexoniarz 30a0d0fbed dbg: the boot menu can turn on remote debugging, in a debug build
schdbgd ships Disabled, and its manifest explains why: a debugger that can read
the process table should not run on a machine whose owner never asked for one.
That default is right and has one bad consequence -- **the machines that most
need debugging are the ones you cannot get a shell on to enable it.** A laptop
with no serial port that stops before it can draw has nowhere to say why, and
`schinitd enable` needs a prompt that does not exist.

So `make DEBUG=1` adds a sixth entry to the F8 menu. Picking it toggles;
booting carries the choice through SCHBOOT_DEBUG_FLAG; the kernel publishes
/proc/bootdebug; schinitd starts the one job that flag may un-disable, with
the manifest's Args now naming 0.0.0.0 -- a debugger reachable only from the
machine being debugged is no use when that machine is the one that will not
talk to you.

Four decisions, since this is a network-reachable debugger:

  compiled out, not hidden   A release build cannot set the flag because the
                             code that would set it is not in the binary. A
                             menu item that is present and refuses is an
                             invitation to make it not refuse.
  consent at the machine     Somebody standing at the keyboard during boot is
                             the strongest consent this system can ask for and
                             the weakest one that is any use on hardware that
                             will not boot.
  one job, named in schinitd Not a manifest key like EnableIfDebug: the general
                             version of "the boot menu starts things that ship
                             off" is worse than the specific one, and this way
                             what the flag can start is one readable line.
  the kernel only publishes  Nothing in the kernel behaves differently, so a
                             debug kernel and a release kernel are the same
                             kernel and a bug cannot be the flag's fault.

/proc/bootdebug is its own file rather than a second line in /proc/bootmode,
because bootmode's whole promise is that reading it is a string compare and
not a parser.

**Also: `tone` stopped lying.** On a machine with no sound card it reported
"the device will not take 16-bit samples", which sends you looking at the
format code instead of at the empty PCI slot -- /dev/dsp exists whether or not
hardware is behind it, and the ioctl is where the absence shows up. ENODEV is
now told apart from a format refusal.

Verified end to end: F8 -> item 6 -> boot -> schinitd says it is starting
schdbgd -> a client outside the VM connected to the forwarded port and ran
`dma`, getting the real arena dump back. The release build has no such entry
in the binary at all, and boots clean.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-24 15:05:23 +02:00
..
common boot/uefi: an F8 menu, with the resolution chooser inside it 2026-08-11 09:04:57 +02:00
uefi dbg: the boot menu can turn on remote debugging, in a debug build 2026-09-24 15:05:23 +02:00
README.md boot: the BIOS loader is gone 2026-08-11 10:20:28 +02:00

Booting SchOS

One firmware path:

boot/
  uefi/    the loader: a 64-bit PE application
  common/  the user interface, shared with nothing else now

There were two. boot/bios/ held an MBR, an El Torito CD stub and a real-mode stage 2, and it was a separate directory rather than #ifdefs because the two shared almost nothing: a BIOS loader lives in 16-bit real mode and talks to the firmware through software interrupts, while UEFI hands a loader long mode with paging already on and a table of function pointers to call.

That asymmetry is what removed it. Everything since roughly 2012 boots UEFI, CSM — the firmware-side BIOS emulation that let legacy loaders run at all — has been going away since Intel dropped support for it in 2020, and the cost of the second path was not the code but the tax on everything that touched it: stage 2 had a 65-sector ceiling that it silently overflowed, and the resolution menu could not be shared because VBE mode setting is INT 10h and needs real mode.

The contract below survives it. It was written to let a second loader exist, and it is worth keeping in that shape: it is what the kernel expects, stated once, rather than a description of whoever happens to be calling.

What the loader must hand the kernel

Whichever path runs, the kernel expects the same things. This is the contract; a second loader is correct exactly when it satisfies it.

Where Notes
Kernel image loaded per its ELF program headers entry at entry64
CPU state see below -- the two paths differ here
Memory map E820_MAP_ADDR, 24-byte entries, count at E820_COUNT_ADDR kernel/arch/x86_64/e820.c reads it
Framebuffer VBE_INFO_ADDR address, pitch, width, height, depth
Verbose flag BOOT_VERBOSE_FLAG_ADDR set by the F8 menu

The addresses are defined once, in include/memlayout.h and include/schboot.h. The kernel does not care which firmware produced them.

The entry point

UEFI hands a loader long mode with paging already on. Dropping back to protected mode only to climb out again is a mode switch whose failure mode is a triple fault with no console, so the kernel publishes an entry that takes the machine as it already is. kernel/arch/x86_64/entry.S carries a sch64_header — magic SCH64BOO, 8-byte aligned within the first 16 KB, followed by a 64-bit physical address — found by scanning. include/schboot.h holds the magic so loader and kernel cannot disagree.

The 32-bit multiboot entry is still in entry.S and now has no caller: the BIOS loader was the only thing that used it. It is left in place rather than removed in the same change that removed the loader, because deleting kernel entry code is its own piece of work with its own way of failing silently.

What that entry expects:

  • long mode, interrupts off
  • CR3 pointing at tables that identity-map the low 4 GB and map the same 4 GB at 0xffff800000000000. entry64low's first instruction is a movabs to a high address, so identity alone triple faults immediately.
  • RBX = the framebuffer physical address, and never 1 — that value marks an application processor in entry64high.

The kernel loads its own GDT at that entry (entry64uefi), rather than the loader doing it. A loader arriving in long mode is still on the firmware's descriptors, and the first thing the kernel does that depends on its own selectors takes a #GP against a GDT the firmware no longer owns — it surfaced as unexpected trap 13 ... cs=38, a long way from the cause.

e820.c reads a BIOS memory map. UEFI hands out a different structure (EFI_MEMORY_DESCRIPTOR, from GetMemoryMap), so the UEFI loader has to translate it into the same 24-byte entries rather than inventing a second format for the kernel to learn.

What booting looks like now

make esp stages EFI/BOOT/BOOTX64.EFI and schos/kernel, and QEMU is pointed at OVMF with that directory as a virtual FAT volume — make qemu. make iso builds a disc with a single El Torito entry pointing at a FAT image holding the same two files.

Neither is an installable disk. A real GPT image with a real FAT partition is the installer's job, and until it exists there is nothing here that writes to a disk a machine could boot from unaided.

Secure Boot is not addressed either: the loader is unsigned, so a machine enforcing it will refuse to run this.