SchOS/kernel/drivers/usb/hub/usb_hub.c

// USB hub class driver.
//
// A hub is what makes USB a tree rather than a handful of sockets, and
// nothing about driving one is special: every operation is an ordinary
// control request sent to the hub as a device. "Reset port 3" is a
// SET_FEATURE(PORT_RESET, wIndex=3). The hub has an interrupt endpoint too,
// which reports which ports have changed. At boot it is enough to walk every
// port and look; after that, the endpoint is how a device plugged into the
// hub, or pulled out of it, is noticed at all. See usb_hub_poll().
//
// What *is* special is what the host controller has to be told. xHCI does not
// discover topology; it is informed of it. A device three hubs deep is
// addressed by a route string naming the port taken at each tier, and a
// slow device behind a fast hub is scheduled against that hub's transaction
// translator rather than against the device. So this driver's real job is
// less "operate the hub" than "tell the controller what shape the tree is".

#include "core/types.h"
#include "core/defs.h"
#include "core/param.h"
#include "core/spinlock.h"
#include "core/dma.h"
#include "dev/usb.h"

#define MAX_PORTS 15            // per hub; more than any real bus hub has
#define NHUB      8

// Port change bits, the second half of GET_STATUS(port).
#define PORTCHG_CONNECTION    (1 << 0)
#define PORTCHG_OTHERS        0x1E      // enable, suspend, over-current, reset

struct hub {
  int    in_use;
  struct usb_dev *dev;
  int    nports;
  void  *scratch;                     // DMA, for GET_STATUS
  volatile uint32 change;             // bit n: port n has changed; 0 is hub
};

static struct hub hubs[NHUB];

static int
hub_request(struct usb_dev *dev, int type, int req, int value, int index,
            void *buf, int len)
{
  struct usb_setup s;

  s.bmRequestType = type;
  s.bRequest      = req;
  s.wValue        = value;
  s.wIndex        = index;
  s.wLength       = len;
  return dev->ops->control(dev, &s, buf, len);
}

static int
port_set_feature(struct usb_dev *dev, int port, int feature)
{
  return hub_request(dev, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
                     USB_REQ_SET_FEATURE, feature, port, 0, 0);
}

static int
port_clear_feature(struct usb_dev *dev, int port, int feature)
{
  return hub_request(dev, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
                     USB_REQ_CLEAR_FEATURE, feature, port, 0, 0);
}

// Returns wPortStatus, or -1. The change bits are in the upper half and are
// deliberately dropped here -- they are acknowledged separately.
static int
port_status(struct usb_dev *dev, int port, void *scratch)
{
  uint16 *st = scratch;

  if(hub_request(dev, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_OTHER,
                 USB_REQ_GET_STATUS, 0, port, scratch, 4) < 0)
    return -1;
  return st[0];
}

// The other half: what has changed since the bits were last cleared.
static int
port_change(struct usb_dev *dev, int port, void *scratch, int *status)
{
  uint16 *st = scratch;

  if(hub_request(dev, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_OTHER,
                 USB_REQ_GET_STATUS, 0, port, scratch, 4) < 0)
    return -1;
  *status = st[0];
  return st[1];
}

// Bring up whatever is plugged into one downstream port.
static void
hub_port(struct usb_dev *hub, int port, void *scratch)
{
  int st, speed, i;

  st = port_status(hub, port, scratch);
  if(st < 0 || !(st & PORTSTAT_CONNECTION))
    return;

  // Acknowledge the connect-change bit before resetting. Leaving it set is
  // harmless here but confuses any later attempt to use these bits for
  // hotplug, which is what they are actually for.
  port_clear_feature(hub, port, PORT_FEAT_C_CONNECTION);

  if(port_set_feature(hub, port, PORT_FEAT_RESET) < 0){
    cprintf("usb-hub: port %d would not reset\n", port);
    return;
  }

  // A hub does not report reset completion by clearing the request; it sets
  // C_PORT_RESET and enables the port. Poll for the enable rather than
  // guessing at a delay, because the time depends on the device.
  for(i = 0; i < 200; i++){
    microdelay(1000);
    st = port_status(hub, port, scratch);
    if(st >= 0 && !(st & PORTSTAT_RESET) && (st & PORTSTAT_ENABLE))
      break;
  }
  port_clear_feature(hub, port, PORT_FEAT_C_RESET);

  st = port_status(hub, port, scratch);
  if(st < 0 || !(st & PORTSTAT_ENABLE)){
    cprintf("usb-hub: port %d did not enable after reset\n", port);
    return;
  }

  // Speed comes out of two status bits rather than a field, and the absence
  // of both means full speed.
  if(st & PORTSTAT_LOWSPEED)
    speed = USB_SPEED_LOW;
  else if(st & PORTSTAT_HIGHSPEED)
    speed = USB_SPEED_HIGH;
  else
    speed = USB_SPEED_FULL;

  // A device needs time to settle after reset before it will answer on
  // endpoint 0. The specification calls this TRSTRCY and allows 10 ms.
  microdelay(20000);

  hub->ops->attach(hub, port, speed);
}

// The status-change endpoint has spoken: a bitmap, one bit per port. From
// interrupt context, so only note it.
static void
hub_complete(struct usb_dev *dev, void *buf, int len)
{
  struct hub *h = dev->drvdata;
  uchar *b = buf;
  uint32 bits = 0;
  int i;

  if(h == 0)
    return;
  for(i = 0; i < len && i < 4; i++)
    bits |= (uint32)b[i] << (8 * i);
  __sync_fetch_and_or(&h->change, bits);
}

static int
hub_probe(struct usb_dev *dev)
{
  struct usb_hub_desc *hd;
  void *scratch;
  int nports, mtt, i;

  scratch = dma_alloc(64, 64);
  if(scratch == 0)
    return -1;

  // The hub descriptor is class-specific, so it comes from a class GET
  // request rather than the standard one -- same request number, different
  // recipient and type.
  if(hub_request(dev, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_DEVICE,
                 USB_REQ_GET_DESCRIPTOR, USB_DT_HUB << 8, 0,
                 scratch, sizeof(struct usb_hub_desc)) < 0){
    cprintf("usb-hub: no hub descriptor\n");
    dma_free(scratch, 64);
    return -1;
  }

  hd = scratch;
  nports = hd->bNbrPorts;
  if(nports < 1 || nports > MAX_PORTS){
    cprintf("usb-hub: %d ports is not a number of ports\n", nports);
    dma_free(scratch, 64);
    return -1;
  }
  mtt = (hd->wHubCharacteristics & HUB_CHAR_TT_MASK) != 0;

  cprintf("usb-hub: %d ports on slot %d\n", nports, dev->slot);

  // Tell the controller *before* powering anything on. Addressing a device
  // behind a slot the controller does not know is a hub fails, and it fails
  // at Address Device with a completion code rather than anywhere useful.
  if(dev->ops->set_hub(dev, nports, mtt) < 0){
    dma_free(scratch, 64);
    return -1;
  }

  // Ports come up unpowered. bPwrOn2PwrGood is how long the hub says it needs
  // after switching power on before a device behind it is worth talking to,
  // in 2 ms units -- a number the hub knows and we do not.
  for(i = 1; i <= nports; i++)
    port_set_feature(dev, i, PORT_FEAT_POWER);
  microdelay((hd->bPwrOn2PwrGood * 2 + 10) * 1000);

  for(i = 1; i <= nports; i++)
    hub_port(dev, i, scratch);

  // From here the hub is listened to: its status-change endpoint completes
  // whenever a port changes, and usb_hub_poll() acts on it. A hub without
  // one is unheard of and could still be driven by polling, but is not.
  for(i = 0; i < NHUB; i++)
    if(!hubs[i].in_use)
      break;
  if(i == NHUB || !dev->has_intr_in){
    if(i == NHUB)
      cprintf("usb-hub: too many hubs; this one will not see hot-plug\n");
    dma_free(scratch, 64);
    return 0;
  }
  hubs[i].dev = dev;
  hubs[i].nports = nports;
  hubs[i].scratch = scratch;
  hubs[i].change = 0;
  hubs[i].in_use = 1;
  dev->drvdata = &hubs[i];
  dev->complete = hub_complete;
  if(dev->ops->open_ep(dev, &dev->intr_in) < 0 ||
     dev->ops->queue_in(dev, dev->intr_in.bEndpointAddress, 0, 0) < 0)
    cprintf("usb-hub: status-change endpoint would not open; no hot-plug\n");
  return 0;
}

// The hub is gone. Whatever was behind it went with it -- the controller
// tears those down first -- so all that is left is to forget it.
static void
hub_disconnect(struct usb_dev *dev)
{
  struct hub *h = dev->drvdata;

  if(h == 0)
    return;
  h->in_use = 0;
  dma_free(h->scratch, 64);
  dev->drvdata = 0;
}

// Act on every port change the hubs have reported. From the hot-plug thread,
// which is the only thing that enumerates once the machine is up.
void
usb_hub_poll(void)
{
  int i, port;

  for(i = 0; i < NHUB; i++){
    struct hub *h = &hubs[i];
    uint32 bits;

    if(!h->in_use || h->change == 0)
      continue;
    bits = __sync_fetch_and_and(&h->change, 0);

    for(port = 1; port <= h->nports; port++){
      int st, chg;

      if(!(bits & (1u << port)))
        continue;
      chg = port_change(h->dev, port, h->scratch, &st);
      if(chg < 0)
        continue;
      if(chg & PORTCHG_OTHERS){
        if(chg & (1 << 1)) port_clear_feature(h->dev, port, PORT_FEAT_C_ENABLE);
        if(chg & (1 << 2)) port_clear_feature(h->dev, port, 18);
        if(chg & (1 << 3)) port_clear_feature(h->dev, port, 19);
        if(chg & (1 << 4)) port_clear_feature(h->dev, port, PORT_FEAT_C_RESET);
      }
      if(!(chg & PORTCHG_CONNECTION))
        continue;

      // Whatever was there before is not there now, even if something is:
      // a connection change with the port still connected is a swap.
      port_clear_feature(h->dev, port, PORT_FEAT_C_CONNECTION);
      h->dev->ops->detach(h->dev, port);
      if(st & PORTSTAT_CONNECTION){
        microdelay(100000);             // debounce, as on a root port
        cprintf("usb-hub: slot %d port %d: plugged in\n", h->dev->slot, port);
        hub_port(h->dev, port, h->scratch);
      }
      // The hub may have been unplugged by what was just done; stop if so.
      if(!h->in_use)
        break;
    }
  }
}

// Any hub, whatever its protocol: 0 is a full-speed hub, 1 single-TT, 2
// multi-TT, and they differ only in how transactions are translated, which
// is the controller's problem rather than ours.
const struct usb_driver usb_hub_driver = {
  .name     = "usb-hub",
  .class    = USB_CLASS_HUB,
  .subclass = 0xFF,
  .protocol = 0xFF,
  .devclass = DEVCLASS_BUS,
  .probe    = hub_probe,
  .disconnect = hub_disconnect,
};