SchOS/kernel/arch/x86_64/entry.S

/* entry.S
 *
 * Copyright (c) 2013 Brian Swetland
 * Modified by Nexoniarz
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 */

#define mboot_magic 0x1badb002
#define mboot_flags 0x00010000
#include "mmu.h"
#include "schboot.h"

/* A second entry point, for firmware that has already put us in long mode.
 *
 * The multiboot header below is entered in 32-bit protected mode, and
 * mboot_entry builds the page tables and makes the long-mode transition
 * itself. UEFI firmware hands a loader long mode with paging already on, so
 * that path would mean dropping back to protected mode only to climb out
 * again -- a mode switch whose failure mode is a triple fault with no console.
 *
 * Instead the 64-bit entry is published where a loader can find it, by the
 * same trick the BIOS loader already uses to find the multiboot header: scan
 * the first 16 KB for a magic. boot/uefi/ looks for SCH64_MAGIC and jumps to
 * the physical address recorded here.
 *
 * The contract at that address, which boot/uefi/main.c must satisfy:
 *   - long mode, interrupts off
 *   - CR3 pointing at page tables that identity-map the low 4 GB *and* map
 *     the same 4 GB at 0xffff800000000000 -- entry64low's first act is a
 *     movabs to a high address, so a loader that only identity-maps triple
 *     faults on the very first instruction
 *   - RBX = 0, marking the boot processor rather than an AP
 * Those are exactly the conditions mboot_entry has established by the time it
 * reaches entry64low, which is why this points there and not somewhere new.
 */
.code64
.global mboot_header
.global mboot_entry

mboot_header:
  .long mboot_magic
  .long mboot_flags
  .long (-mboot_magic -mboot_flags)
  .long mboot_load_addr
  .long mboot_load_addr
  .long mboot_load_end
  .long mboot_bss_end
  .long mboot_entry_addr

/* After the multiboot header, never before it: the header's own header_addr
   field says it lives at mboot_load_addr, and the BIOS loader computes the
   kernel's file offset from (header_addr - load_addr). Sixteen bytes inserted
   ahead of it makes that arithmetic wrong and loads the kernel shifted, which
   fails as a triple fault rather than as anything that names the cause. */
.align 8
.global sch64_header
sch64_header:
  .long SCH64_MAGIC0
  .long SCH64_MAGIC1
  .quad (entry64uefi - mboot_header + mboot_load_addr)

.code32
mboot_entry:
  mov     %eax, %ebp

  # bootstrap page tables (0x1000 - 0x3000)
  xor     %eax, %eax
  mov     $0x1000, %edi
  mov     $0x2000, %ecx
  rep     stosb

  # Bootstrap page tables (Identity mapping 4GB)
  # PML4T[0] i PML4T[256] -> PDPT pod 0x2000
  mov     $(0x2000 | PTE_P | PTE_W), %edx
  mov     %edx, 0x1000
  mov     %edx, 0x1800

  # PDPT mapping 4GB using 1GB huge pages
  mov     $(0x00000000 | PTE_P | PTE_PS | PTE_W), %edx
  mov     %edx, 0x2000
  mov     $(0x40000000 | PTE_P | PTE_PS | PTE_W), %edx
  mov     %edx, 0x2008
  mov     $(0x80000000 | PTE_P | PTE_PS | PTE_W), %edx
  mov     %edx, 0x2010
  mov     $(0xC0000000 | PTE_P | PTE_PS | PTE_W), %edx
  mov     %edx, 0x2018

  mov     %ebp, %ebx

.global entry32mp
entry32mp:
  mov     $0x1000, %eax
  mov     %eax, %cr3

  lgdt    (gdtr64 - mboot_header + mboot_load_addr)

  mov     %cr4, %eax
  bts     $5, %eax
  mov     %eax, %cr4

  mov     $MSR_EFER, %ecx
  rdmsr
  bts     $0, %eax
  bts     $8, %eax
  wrmsr

  mov     %cr0, %eax
  orl     $(CR0_PG | CR0_WP | CR0_MP), %eax
  mov     %eax, %cr0

  ljmp    $8, $(entry64low - mboot_header + mboot_load_addr)

.align 16
gdtr64:
  .word gdt64_end - gdt64_begin - 1;
  .quad gdt64_begin - mboot_header + mboot_load_addr

.align 16
gdt64_begin:
  .long 0x00000000
  .long 0x00000000
  .long 0x00000000 # 64-bit code
  .long 0x00209800
  .long 0x00000000 # 64-bit data
  .long 0x00009000
gdt64_end:

.align 16
.code64

/* Entered by boot/uefi/ with the firmware's GDT still loaded.
 *
 * mboot_entry reaches entry64low by way of entry32mp, which does the lgdt on
 * the way past. A loader that arrives already in long mode skips all of that,
 * so it arrives running on the firmware's descriptors -- OVMF's CS is 0x38 --
 * and the first thing the kernel does that depends on its own selectors takes
 * a #GP against a GDT the firmware no longer owns. It surfaced as
 * "unexpected trap 13 ... cs=38", a long way from the cause.
 *
 * So load the kernel's GDT here and reload CS through it before going on.
 * Doing it in the kernel rather than in the loader is deliberate: the GDT is
 * the kernel's, and a loader that had to know its layout would have to be
 * changed every time it moved.
 */
.global entry64uefi
entry64uefi:
  /* Enable SYSCALL/SYSRET.
   *
   * The 32-bit entry above sets EFER.SCE on its way into long mode. This path
   * skips all of that, because firmware has already done the mode switch -- and
   * with it skips the one bit that is not about paging. UEFI has no reason to
   * set SCE and does not, so the kernel came up with SYSCALL disabled and the
   * first sysretq back to user space raised #UD: "unexpected trap 6 ... rip
   * <syscall_trapret>" in pid 1, at zero ticks. It stayed hidden until this
   * path first got far enough to run a user program.
   *
   * Read-modify-write: LME and LMA are already set by firmware and must stay.
   */
  mov     $MSR_EFER, %ecx
  rdmsr
  bts     $0, %eax
  wrmsr

  lgdt    (gdtr64 - mboot_header + mboot_load_addr)
  movq    $(entry64low - mboot_header + mboot_load_addr), %rax
  pushq   $8                       /* the 64-bit code selector in gdt64 */
  pushq   %rax
  lretq                            /* far return: reloads CS */

entry64low:
  movabs  $entry64high, %rax
  jmp     *%rax

.global _start
_start:
entry64high:
  xor     %rax, %rax
  mov     %ax, %ss
  mov     %ax, %ds
  mov     %ax, %es
  mov     %ax, %fs
  mov     %ax, %gs

  # Is this an application processor, or the boot processor?
  #
  # This check used to be a comment saying it had not been written yet, and
  # every AP fell straight through into the BSP path below: it set RSP to the
  # *boot processor's* stack, passed its own flag to kmain() as a framebuffer
  # address, and re-ran the entire bootstrap -- e820_init, kinit1, kvmalloc --
  # on a second core sharing one stack with the first. That is the SMP triple
  # fault. QEMU hid it for years by never reporting more than one CPU (see
  # kernel/arch/x86_64/acpi.c); VMware did not.
  #
  # EBX is the discriminator, and entryother.S sets it to 1 immediately before
  # entering long mode for exactly this purpose. It is safe: on the boot
  # processor EBX carries the VESA framebuffer address from the loader, which is
  # either zero or a physical MMIO address, and can never be 1.
  cmp     $1, %ebx
  je      entry64mp

  # Setup initial stack
  movabs  $0xFFFF800000010000, %rax
  mov     %rax, %rsp

  # Pass VESA address to main (1st argument in RDI)
  mov     %rbx, %rdi

  call    kmain

.global __deadloop
__deadloop:
  jmp     .

entry64mp:
  mov     $0x7000, %rax
  mov     -16(%rax), %rsp
  jmp     mpenter

.global wrmsr
wrmsr:
  mov     %rdi, %rcx
  mov     %rsi, %rax
  shr     $32, %rsi
  mov     %rsi, %rdx
  wrmsr
  retq

.global ignore_sysret
ignore_sysret:
  mov     $-38, %rax
  sysretq