SchOS/kernel/drivers/usb/core/usb.c

// The USB core: everything between "the controller can talk to a device" and
// "a driver knows what the device is".
//
// The split matters. xhci.c deals in TRBs, slot IDs and doorbells; nothing
// here knows any of those words. A class driver deals in reports and
// commands; nothing here knows those either. What lives in the middle is the
// part of USB that is the same for every device ever made: read the
// configuration, choose one, look at the interface, find someone who wants it.

#include "core/types.h"
#include "core/defs.h"
#include "core/param.h"
#include "arch/memlayout.h"
#include "arch/mmu.h"
#include "core/spinlock.h"
#include "core/dma.h"
#include "dev/usb.h"
#include "core/hwinfo.h"

// A staging buffer for control transfers.
//
// It exists because a descriptor has to be read into memory the controller
// can reach and that does not straddle a 64 KB boundary -- a rule that holds
// for xHCI data stages and that a static buffer inside some other structure
// satisfies only by luck. One page, allocated once, copied out of afterwards.
static void *scratch;

static void *
get_scratch(void)
{
  if(scratch == 0)
    scratch = dma_alloc(4096, 4096);
  return scratch;
}

static int
get_descriptor(struct usb_dev *dev, int type, int index, void *buf, int len)
{
  struct usb_setup s;

  // Clear first. The scratch buffer is shared by every device on the bus, and
  // a control transfer reports success without saying how many bytes it
  // actually moved -- so a device that answers short leaves the previous
  // device's descriptor visible past the end of its own, and the parser
  // happily walks into it. Zeroed bytes stop the walk instead, because a
  // descriptor whose length is 0 is rejected.
  memset(buf, 0, len);

  s.bmRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
  s.bRequest      = USB_REQ_GET_DESCRIPTOR;
  s.wValue        = (type << 8) | index;
  s.wIndex        = 0;
  s.wLength       = len;
  return dev->ops->control(dev, &s, buf, len);
}

static int
set_configuration(struct usb_dev *dev, int value)
{
  struct usb_setup s;

  s.bmRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
  s.bRequest      = USB_REQ_SET_CONFIG;
  s.wValue        = value;
  s.wIndex        = 0;
  s.wLength       = 0;
  return dev->ops->control(dev, &s, 0, 0);
}

// Walk the configuration descriptor.
//
// What comes back from GET_DESCRIPTOR(CONFIG) is not one descriptor: it is
// the configuration descriptor followed by every interface and endpoint
// descriptor belonging to it, packed end to end, each one starting with its
// own length. That length is the only thing that can be relied on to find the
// next -- descriptor types this kernel has never heard of appear in the
// middle (HID's own, class-specific ones) and skipping them by size is the
// only way through. A parser that assumed a fixed order would work on one
// device and fail on the next.
//
// `nth` picks the interface: the nth one at alternate setting 0, counted from
// zero. Returns 0 if there is one, -1 when there are no more.
static int
parse_config(struct usb_dev *dev, int nth)
{
  int off = 0;
  int seen_iface = 0;
  int count = 0;

  dev->has_intr_in = dev->has_bulk_in = dev->has_bulk_out = 0;

  while(off + 2 <= dev->conflen){
    uint8 len  = dev->conf[off];
    uint8 type = dev->conf[off + 1];

    if(len < 2 || off + len > dev->conflen)
      break;                            // malformed: stop rather than guess

    if(type == USB_DT_INTERFACE && len >= (int)sizeof(dev->iface)){
      struct usb_interface_desc *id = (struct usb_interface_desc *)&dev->conf[off];
      if(seen_iface)
        break;                          // the next interface: this one is done
      // Alternate settings are the same interface again with other
      // endpoints. Setting 0 is the one in force after SET_CONFIGURATION.
      if(id->bAlternateSetting == 0 && count++ == nth){
        memmove(&dev->iface, id, sizeof(dev->iface));
        seen_iface = 1;
      }
    } else if(type == USB_DT_ENDPOINT && seen_iface &&
              len >= (int)sizeof(struct usb_endpoint_desc)){
      struct usb_endpoint_desc ep;
      int in;

      memmove(&ep, &dev->conf[off], sizeof(ep));
      in = USB_EP_IS_IN(ep.bEndpointAddress);

      switch(USB_EP_XFERTYPE(ep.bmAttributes)){
      case USB_EP_INTERRUPT:
        if(in && !dev->has_intr_in){ dev->intr_in = ep; dev->has_intr_in = 1; }
        break;
      case USB_EP_BULK:
        if(in && !dev->has_bulk_in){ dev->bulk_in = ep; dev->has_bulk_in = 1; }
        if(!in && !dev->has_bulk_out){ dev->bulk_out = ep; dev->has_bulk_out = 1; }
        break;
      }
    }
    off += len;
  }
  return seen_iface ? 0 : -1;
}

// One usb_dev for every interface after the first. See `base` in
// include/dev/usb.h. A fixed pool, like everything else here. It was sixteen,
// which a dock -- hub, Ethernet, audio, card reader, each two or three
// interfaces -- and a couple of receivers already reach. 672 bytes each.
#define NIFDEV 64
static struct usb_dev ifdevs[NIFDEV];

// ---------------------------------------------------------------------------
// Class drivers
// ---------------------------------------------------------------------------

extern const struct usb_driver usb_hid_driver;
void usb_bind_all(struct usb_dev *dev);

static int
matches(const struct usb_driver *drv, struct usb_dev *dev)
{
  if(drv->class != 0xFF && drv->class != dev->iface.bInterfaceClass)
    return 0;
  if(drv->subclass != 0xFF && drv->subclass != dev->iface.bInterfaceSubClass)
    return 0;
  if(drv->protocol != 0xFF && drv->protocol != dev->iface.bInterfaceProtocol)
    return 0;
  return 1;
}

// Offer a device to one driver. Returns 1 if it was claimed.
int
usb_offer(const struct usb_driver *drv, struct usb_dev *dev)
{
  if(dev->driver || !matches(drv, dev))
    return 0;
  if(drv->probe(dev) != 0)
    return 0;
  dev->driver = drv->name;
  dev->drv = drv;
  return 1;
}

// ---------------------------------------------------------------------------
// What is plugged in, for /sys/bus/usb/devices.
//
// The controller owns each usb_dev; this only remembers which ones are
// attached, from usb_attach until usb_detach, and copies their identity out
// under the lock so a reader never follows a pointer the controller may be
// about to reuse. A bus number is handed to each controller the first time one
// of its devices appears, in that order, as Linux numbers usb1, usb2.

#define NPRESENT 64
#define NBUSES   8

static struct spinlock present_lock;
static int    present_init;
static struct usb_dev *present[NPRESENT];
static void  *buses[NBUSES];

static void
present_add(struct usb_dev *dev)
{
  if(!present_init){
    initlock(&present_lock, "usbpresent");
    present_init = 1;
  }
  acquire(&present_lock);
  for(int i = 0; i < NPRESENT; i++)
    if(present[i] == 0){ present[i] = dev; break; }
  for(int b = 0; b < NBUSES; b++){
    if(buses[b] == dev->hc) break;
    if(buses[b] == 0){ buses[b] = dev->hc; break; }
  }
  release(&present_lock);
}

static void
present_del(struct usb_dev *dev)
{
  if(!present_init)
    return;
  acquire(&present_lock);
  for(int i = 0; i < NPRESENT; i++)
    if(present[i] == dev) present[i] = 0;
  release(&present_lock);
}

static void
put_num(char *out, int *n, int cap, int v)
{
  char t[12];
  int k = 0;
  do { t[k++] = '0' + v % 10; v /= 10; } while(v);
  while(k && *n < cap - 1) out[(*n)++] = t[--k];
  out[*n] = 0;
}

int
usb_info_nth(int idx, struct usb_info *o)
{
  if(!present_init)
    return -1;
  acquire(&present_lock);
  int seen = 0;
  for(int i = 0; i < NPRESENT; i++){
    struct usb_dev *d = present[i];
    if(d == 0 || seen++ != idx)
      continue;
    memset(o, 0, sizeof *o);
    o->bus = 1;
    for(int b = 0; b < NBUSES; b++)
      if(buses[b] == d->hc){ o->bus = b + 1; break; }
    o->devnum = d->slot;
    o->speed  = d->speed;
    o->vid    = d->desc.idVendor;
    o->pid    = d->desc.idProduct;
    o->bcd    = d->desc.bcdDevice;
    o->cls    = d->desc.bDeviceClass;
    o->subcls = d->desc.bDeviceSubClass;
    o->proto  = d->desc.bDeviceProtocol;
    o->nconf  = d->desc.bNumConfigurations;

    // "<bus>-<root port>[.<hub port>...]": the route string holds one
    // downstream port per tier below the root, a nibble each.
    int n = 0, cap = (int)sizeof o->path;
    put_num(o->path, &n, cap, o->bus);
    o->path[n++] = '-';
    put_num(o->path, &n, cap, d->port);
    for(int t = 0; t < d->tier && n < cap - 3; t++){
      o->path[n++] = '.';
      put_num(o->path, &n, cap, (int)((d->route >> (4 * t)) & 0xF));
    }

    const char *drv = d->driver;
    for(int k = 0; !drv && k < NIFDEV; k++)
      if(ifdevs[k].in_use && ifdevs[k].base == d)
        drv = ifdevs[k].driver;
    if(drv)
      safestrcpy(o->driver, drv, sizeof o->driver);
    release(&present_lock);
    return 0;
  }
  release(&present_lock);
  return -1;
}

void
usb_attach(struct usb_dev *dev)
{
  struct usb_config_desc *cd;
  void *buf = get_scratch();
  int total;

  if(buf == 0)
    return;
  present_add(dev);

  // Nine bytes first, because wTotalLength is in them and there is no other
  // way to know how much to ask for.
  if(get_descriptor(dev, USB_DT_CONFIG, 0, buf, 9) < 0){
    cprintf("usb: slot %d would not give up its configuration\n", dev->slot);
    return;
  }
  cd = buf;
  total = cd->wTotalLength;

  // A configuration that does not contain its own descriptor is not one we
  // can do anything with, and reading it as a length would walk off the end.
  if(cd->bDescriptorType != USB_DT_CONFIG || total < (int)sizeof(*cd)){
    cprintf("usb: slot %d returned a malformed configuration descriptor\n",
            dev->slot);
    return;
  }
  if(total > USB_MAXCONF)
    total = USB_MAXCONF;

  if(get_descriptor(dev, USB_DT_CONFIG, 0, buf, total) < 0)
    return;
  memmove(dev->conf, buf, total);
  dev->conflen = total;

  // A device is not obliged to do anything at all until it has been
  // configured -- before this, endpoints other than 0 do not exist.
  if(set_configuration(dev, cd->bConfigurationValue) < 0){
    cprintf("usb: slot %d refused SET_CONFIGURATION\n", dev->slot);
    return;
  }

  // Every interface, each offered to the class drivers on its own. This used
  // to stop after the first, which is how a wireless receiver's mouse --
  // interface 1, behind the keyboard on 0 -- was never heard from.
  for(int n = 0; ; n++){
    struct usb_dev *d = dev;

    if(n > 0){
      d = 0;
      for(int i = 0; i < NIFDEV; i++)
        if(!ifdevs[i].in_use){ d = &ifdevs[i]; break; }
      if(d == 0){
        cprintf("usb:   out of interface slots; the rest are not used\n");
        break;
      }
      *d = *dev;
      d->base     = dev;
      d->driver   = 0;
      d->drv      = 0;
      d->drvdata  = 0;
      d->complete = 0;
    }
    if(parse_config(d, n) < 0){
      if(n > 0)
        d->in_use = 0;
      break;
    }

    cprintf("usb:   interface %d: class %d.%d protocol %d, %d endpoint%s%s%s%s\n",
            d->iface.bInterfaceNumber,
            d->iface.bInterfaceClass, d->iface.bInterfaceSubClass,
            d->iface.bInterfaceProtocol, d->iface.bNumEndpoints,
            d->iface.bNumEndpoints == 1 ? "" : "s",
            d->has_intr_in  ? ", interrupt IN" : "",
            d->has_bulk_in  ? ", bulk IN" : "",
            d->has_bulk_out ? ", bulk OUT" : "");

    usb_bind_all(d);

    if(d->driver == 0){
      cprintf("usb:   no driver for this interface\n");
      if(n > 0)
        d->in_use = 0;            // nothing will ever use it; give it back
    }
  }
}

// Tell every driver bound to any interface of `dev` that it is gone, and give
// the interface slots back. The controller frees the endpoints afterwards.
void
usb_detach(struct usb_dev *dev)
{
  present_del(dev);
  for(int i = 0; i < NIFDEV; i++){
    struct usb_dev *d = &ifdevs[i];
    if(!d->in_use || d->base != dev)
      continue;
    if(d->drv && d->drv->disconnect)
      d->drv->disconnect(d);
    d->in_use = 0;
  }
  if(dev->drv && dev->drv->disconnect)
    dev->drv->disconnect(dev);
  dev->drv = 0;
  dev->driver = 0;
}