| Filename | Latest commit message | Latest commit date |
|---|---|---|
617a4aec0a
A boot printed about thirty lines before reaching a prompt. Every one was
useful once, and printed on every boot for ever they train the person in front
of the machine to stop reading their own console -- which is expensive on the
day one of them changes.
SchOS UEFI loader
Press F8 for boot options... booting
Welcome to SchOS! (F8 at boot for the full log, or dmesg once you are in)
root@schos / »
**Nothing was deleted, it was routed.** consputc() already wrote to the klog
ring before anywhere else, so a line can be kept in full while being held back
from the two places a person looks. kinfo() is cprintf() with that routing, and
`dmesg` still has the whole boot with timestamps afterwards. The rule for which
is which is not how interesting a line is -- everything was interesting to
somebody once -- but whether you would want to see it on a machine that is
*working*. `pci: 7 devices` is yes the first time and no every time after;
`e1000: no DMA memory for the rings` is yes for ever and stays a cprintf.
The verbose boot the F8 menu already offered now means something much bigger,
which is the other half of this: it is the only way to see any of it live.
Userspace follows through /proc/bootmode, one word. schinit, schinitd and vgpud
hold back their progress lines and never their failures -- a supervisor that
goes quiet when a job dies is worse than one that chatters.
Two things found by testing rather than by reading:
- schinit read /proc/bootmode *before* bootstrap() mounted /proc, so it got
"quiet" every time and the verbose boot was quiet in the one process that
runs first. It reads after the mount now.
- resolvconf announced "already exists; -f to replace it" on every boot after
the first, which is a line about having done nothing. It is quiet when the
file already says what it would have written, and speaks only when the two
disagree -- which means the nameserver changed and the machine is using the
old one.
Verified both ways: quiet boot is six lines, a forced-verbose build prints all
thirty plus the `verbose boot:` steps, and /proc/kmsg holds every line in both.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
|
||
| .. | ||
| common | ||
| uefi | ||
| README.md | ||
Booting SchOS
One firmware path:
boot/
uefi/ the loader: a 64-bit PE application
common/ the user interface, shared with nothing else now
There were two. boot/bios/ held an MBR, an El Torito CD stub and a real-mode
stage 2, and it was a separate directory rather than #ifdefs because the two
shared almost nothing: a BIOS loader lives in 16-bit real mode and talks to the
firmware through software interrupts, while UEFI hands a loader long mode with
paging already on and a table of function pointers to call.
That asymmetry is what removed it. Everything since roughly 2012 boots UEFI,
CSM — the firmware-side BIOS emulation that let legacy loaders run at all — has
been going away since Intel dropped support for it in 2020, and the cost of the
second path was not the code but the tax on everything that touched it: stage 2
had a 65-sector ceiling that it silently overflowed, and the resolution menu
could not be shared because VBE mode setting is INT 10h and needs real mode.
The contract below survives it. It was written to let a second loader exist, and it is worth keeping in that shape: it is what the kernel expects, stated once, rather than a description of whoever happens to be calling.
What the loader must hand the kernel
Whichever path runs, the kernel expects the same things. This is the contract; a second loader is correct exactly when it satisfies it.
| Where | Notes | |
|---|---|---|
| Kernel image | loaded per its ELF program headers | entry at entry64 |
| CPU state | see below -- the two paths differ here | |
| Memory map | E820_MAP_ADDR, 24-byte entries, count at E820_COUNT_ADDR |
kernel/arch/x86_64/e820.c reads it |
| Framebuffer | VBE_INFO_ADDR |
address, pitch, width, height, depth |
| Verbose flag | BOOT_VERBOSE_FLAG_ADDR |
set by the F8 menu |
The addresses are defined once, in include/memlayout.h and include/schboot.h.
The kernel does not care which firmware produced them.
The entry point
UEFI hands a loader long mode with paging already on. Dropping back to
protected mode only to climb out again is a mode switch whose failure mode is a
triple fault with no console, so the kernel publishes an entry that takes the
machine as it already is.
kernel/arch/x86_64/entry.S carries a sch64_header — magic SCH64BOO,
8-byte aligned within the first 16 KB, followed by a 64-bit physical address —
found by scanning. include/schboot.h holds the magic so loader and kernel
cannot disagree.
The 32-bit multiboot entry is still in entry.S and now has no caller: the
BIOS loader was the only thing that used it. It is left in place rather than
removed in the same change that removed the loader, because deleting kernel
entry code is its own piece of work with its own way of failing silently.
What that entry expects:
- long mode, interrupts off
- CR3 pointing at tables that identity-map the low 4 GB and map the same
4 GB at
0xffff800000000000.entry64low's first instruction is amovabsto a high address, so identity alone triple faults immediately. - RBX = the framebuffer physical address, and never 1 — that value marks an
application processor in
entry64high.
The kernel loads its own GDT at that entry (entry64uefi), rather than the
loader doing it. A loader arriving in long mode is still on the firmware's
descriptors, and the first thing the kernel does that depends on its own
selectors takes a #GP against a GDT the firmware no longer owns — it
surfaced as unexpected trap 13 ... cs=38, a long way from the cause.
e820.c reads a BIOS memory map. UEFI hands out a different structure
(EFI_MEMORY_DESCRIPTOR, from GetMemoryMap), so the UEFI loader has to
translate it into the same 24-byte entries rather than inventing a second
format for the kernel to learn.
What booting looks like now
make esp stages EFI/BOOT/BOOTX64.EFI and schos/kernel, and QEMU is
pointed at OVMF with that directory as a virtual FAT volume — make qemu.
make iso builds a disc with a single El Torito entry pointing at a FAT image
holding the same two files.
Neither is an installable disk. A real GPT image with a real FAT partition is the installer's job, and until it exists there is nothing here that writes to a disk a machine could boot from unaided.
Secure Boot is not addressed either: the loader is unsigned, so a machine enforcing it will refuse to run this.