Porting zsh found four defects in the kernel and one in the filesystem. None
of them were about zsh; all of them had been there the whole time.
**exec threw the environment away.** kernel/fs/exec.c wrote a single zero for
envp with the comment "(no environment)" -- not yet, but ever, for every
process. musl has been passing a perfectly good envp to execve (Linux 59, which
SchOS answers) and it was never read. So $TERM was unset, $PATH was whatever
each program invented, and a variable exported in a shell did not survive the
exec meant to carry it. exec() takes an envp, sys_exec reads argument three,
and schinit manifests grew an Environment key. The userland two-argument
exec(path, argv) stays as a wrapper that passes null explicitly -- the raw stub
is execve now, so a short caller cannot leave %rdx holding a stray pointer.
**Which overflowed the kernel stack.** Three pointer arrays, ~1.8 KB, on a
4096-byte stack, under exec -> loaduvm -> readi -> SchFS -> btree. Pid 1 went
down on the first exec. The canary caught it and named the process, which is
what it is for. They live in one kalloc'd page now.
**waitpid returned a bare -1** for both "no children" and "interrupted". musl
reads [-4095,-1] as -errno, so userspace saw EPERM; zsh printed "wait failed:
operation not permitted" and abandoned the rest of /etc/zsh/zshrc. -ECHILD and
-EINTR now. Third time a bare -1 has cost real time -- on a system with no
permission model, EPERM should be read as "a syscall returned -1".
**NVMA was 64.** musl's allocator takes a mapping per size class and does not
release them eagerly, so compinit ran out of slots and got -1, which is EPERM,
which malloc turns into NULL, which zsh reports as "fatal error: out of memory"
-- on a machine with 1000 MB free. 256 slots, and -ENOMEM.
**And a small write to SchFS costs 58 ms.** 200 writes to one open file take
11.75 s; the same to /dev/null take 0.14 s. That is the design stated at the
top of kmount.c -- one transaction group per operation, and a commit is two
flushes and an uberblock -- not a bug. But compdump writes its digest with
thousands of separate prints, so it takes minutes and looks like a hang.
compinit -D, which skips the dump, finishes in 3.6 s. This one is a decision
rather than a fix, so it is written up and left: /etc/zsh/zshrc keeps compinit
switched off and explains exactly why, with the measurements.
zsh runs as /bin/zsh and is the console shell. ZLE works -- arrow keys recall
history through terminfo, $COLUMNS reads the real 160 because TIOCGWINSZ was
fixed, colour and prompt expansion work, startup is 0.14 s. mksh keeps /bin/sh,
so schinit's no-jobs fallback is a different program from the one that could
have failed.
Also fixed while here: AT_CLKTCK was the literal 100 and is USER_HZ; the
extract rule in four ports could move a source tree inside itself when make
re-ran it, which is how zsh's configure came to write modfile=zsh-5.9/... into
config.modules and fail three steps later.
schfs-check passes. Full writeup in docs/history/kernel.md section 14.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported 3 seconds of uptime after 15 real ones, `time` claimed
3.12s for a 20-second command, and ping's one-second interval was closer to
six. One cause, not three: `ticks` was advancing at ~14.5 Hz instead of 100.
It was not the timer. virtio-gpu-pci shares IRQ 11 with the e1000 and
registered no interrupt handler at all. PCI INTx is level-triggered, so the
device held the line asserted, the kernel signalled EOI, and it fired again
immediately -- 72,000 interrupts a second, 83% of CPU0, starving the tick.
The e1000's handler read ICR as zero half a million times, correctly
answering "not mine", which is what made it look like a network-free problem.
Reading virtio's ISR byte clears it and drops the line. That is the fix.
irq_dispatch now measures each line's rate against the TSC -- not ticks,
which is the first casualty of a storm -- and names the attached handlers
once above 20000/s. It reproduces the original fault as a single line.
Found along the way, and fixed because they were real:
- lapicinit loaded TICR with xv6's uncalibrated 10000000, whose own comment
admitted it was never measured. calibrate_timers() now measures the LAPIC
and the TSC against the 8254 PIT. (It came back at 999.9 MHz, so this was
not the bug -- but the next machine is not obliged to be 1 GHz.)
- microdelay() was an empty function body. Every microdelay(1000) in the
xHCI reset path and the USB hub power-on sequence returned instantly.
- HZ is a constant in param.h now, not the literal 100 written out at a
dozen ticks-to-seconds conversions. USER_HZ is separate and deliberately
does not follow it: musl answers sysconf(_SC_CLK_TCK) with 100 always, so
times() and /proc/stat scale at the syscall boundary the way Linux does.
- TIOCGWINSZ answered a hardcoded 24x80. gfx_cols()/gfx_rows() have known
the real geometry all along; at 1024x768 the console is 128x48, so every
program that lays out a screen was formatting for the wrong one.
- TCFLSH fell through to the catch-all `return 0`, claiming to discard
input without discarding any.
uptime now advances 5.01 seconds per 5 real seconds. schfs-check passes.
Full investigation, including the two wrong hypotheses and the measurement
flaw that protected them, in docs/history/kernel.md section 13.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Boot died straight after "exiting boot services" with a KVM internal error,
RIP=0x801a5dc5 and RBX=0x80000000 -- the framebuffer base. The bytes at RIP were
0x0C0E13 and 0xD1D5DC: SCH_BG and a grey from the splash's metal gradient. The
machine was executing the picture of itself starting up.
The hand-off to the kernel writes rbx and did not say so:
"mov %1, %%rbx\n\t" <- writes rbx
"jmp *%2\n\t"
: : "r"(PML4_ADDR), "r"(fb), "r"(entry)
: "memory"); <- rbx not declared clobbered
With rbx absent from the clobber list the compiler may allocate an input there,
and clang 21 allocated `entry`:
movq %rax, %cr3
movq %rcx, %rbx <- the framebuffer, into rbx
jmpq *%rbx <- %2 was rbx, and now holds the framebuffer
Declaring "rbx" forbids the allocation. Verified in the generated assembly
rather than by reasoning: jmpq *%rbx became jmpq *%r14, and the machine now
boots through to schinit: ready.
This had been latent since the loader was written. It worked only because every
compiler that had built it happened to choose a different register, and it
surfaced the first time the binary was relinked with a different clang -- which
only happened because the previous commit fixed the Makefile dependency that had
been leaving the loader stale. A stale artifact hides the bug the fresh one
reveals.
It is also the third time this project has been broken by a register the code
depends on but never asks for: docs/history/kernel.md section 4 (the BIOS
loader passing the framebuffer in EAX by luck) and section 8 (%fs:0 used as
scratch when the ABI reserves it). Written up as section 7b, with the one-line
recipe that settles all three -- read the generated assembly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Nexoniarz