sendmsg/recvmsg with SCM_RIGHTS. Item 1 of docs/plan/foundations.md and
mechanism 1 of docs/plan/hybrid.md, which are the same primitive seen from two
directions: Wayland's wl_shm_create_pool passes a file descriptor with no
integer-shaped alternative, and handing a driver process the device it is
allowed to touch is the same act. Both plans stopped here.
Linux's structures byte for byte -- msghdr, cmsghdr, the CMSG_ macros -- because
the programs that need this are not ours. libwayland and toybox both call
recvmsg with Linux's headers and would not notice a friendlier door.
The delivery rule is the whole design. A batch of descriptors is pinned to the
stream position of the first byte of the message that carried it, and that has
two halves: a reader arriving at that position is handed them, and a reader that
has not reached it is stopped SHORT of it. Leave out the second half and a
program asking for 4096 bytes swallows three messages and is handed one
message's descriptors, with nothing in the result saying which. socktest checks
exactly that: two one-byte messages, an eight-byte read, one byte back.
The kernel holds a reference to every descriptor in flight, so a sender may
close its own copy the moment sendmsg returns. Giving that reference back is the
part that leaks if it is not written down, and there are three ways a message
ends:
- received with room installed in the receiver's table
- received without room, or by
plain read(2) closed; MSG_CTRUNC for the first case
- never received, socket closed closed by sockclose
The middle row looks like a choice and is not: holding kernel references for a
receiver that has proved it is not looking is a leak with extra steps.
No garbage collector. A socket descriptor sent over that same socket and never
received holds a reference to the socket that holds the reference to it, and
neither close reaches zero. Linux carries several hundred lines for this.
Nothing on either plan passes a socket over a socket -- Wayland passes memory,
the driver work passes devices -- so it is a bounded leak that is documented
rather than a silent one.
Fourteen checks in cmd/socktest, and every one moves data through the descriptor
rather than inspecting it. The descriptor passed is always a pipe end, because a
pipe announces its own lifetime: a read of a pipe whose writers are all gone
returns 0, which turns "was the kernel's reference released" -- otherwise
invisible from userspace -- into a value a test can compare.
Two bugs fell out, neither in the new code:
- sockpair() never set the socket's domain, so every socketpair() socket
claimed domain 0. Invisible while the data paths asked only whether a socket
was AF_INET or AF_NETLINK, since zero answers "neither" correctly.
SCM_RIGHTS asks "is this AF_UNIX", and zero is wrong for that one.
- pipe_poll() reports POLLHUP but not POLLIN at end of file, so a non-blocking
read of a pipe whose writers had all gone returned EAGAIN forever instead of
0 -- a program that polls and reads spins waiting for an end that already
happened. sockreadable() always had the equivalent condition; the pipe path
did not. Found because the test helper for "is this descriptor closed" is a
non-blocking read of a pipe.
projects/schcom/README.md said SCM_RIGHTS was done for a long time while nothing
in the kernel implemented it, and an entire GUI plan was drawn on that line.
It is true now, which is not the same as it having been right, and the README
says so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md's first eviction. cmd/vgpud is the virtio-gpu driver as a
process: it finds the device by vendor and device id, asks the kernel for it,
and does the whole virtio 1.0 bring-up from outside -- reset, feature
negotiation, a virtqueue in DMA memory, GET_DISPLAY_INFO, RESOURCE_CREATE_2D,
ATTACH_BACKING, SET_SCANOUT, TRANSFER and FLUSH.
vgpud: virtio-gpu at 00:03.0, currently held by virtio-gpu
virtio-gpu: released to userspace; screen is the VBE framebuffer
vgpud: claimed
vgpud: display is 1280x800
vgpud: scanout is ours, framebuffer at physical 0x3eceb000
vgpud: drew a test pattern from userspace
Verified by screendumping the virtio-gpu head: the pattern is there, with a
checkerboard that would shear if the stride were wrong. The console carries on
in VBE on the other head at the same time, which is the fallback rule from the
plan working rather than being described.
No syscall knows this is a GPU. The kernel handed over a PCI device and the
process decided what it was -- which is the property that makes this a general
mechanism, and the reason the evictions come before anything foreign.
Four things the first real driver needed that the test program had not:
- PCI config space (PCIIOC_CFG). A virtio device says where its registers
are in vendor capabilities, which live in config space, so a driver that
cannot read it cannot find its own registers.
- a way for the incumbent to let go: struct pci_driver gained a release
hook. A driver without one keeps its device, which is always safe and for
anything on the path to a shell is also correct.
- the outgoing driver freeing its DMA. Releasing the device but keeping its
4 MB framebuffer is half a handover -- the incoming driver asks for one and
is told there is no room.
- a 16 MB DMA arena. 4 MB was exactly one framebuffer at this resolution,
and either side of a handover there are two.
And one bug it reproduced on its first working run: vgpud polls the used ring,
so it registered no interrupt handler, and a virtio device interrupts on every
completion. The storm detector said so immediately --
irq 11: 77780 interrupts/second -- a device on this line is not
acknowledging it. handler 'e1000' is attached
-- naming the line, the rate and the neighbour it was drowning. One line fixes
it (VRING_AVAIL_F_NO_INTERRUPT before the queue is enabled), and that detector
was worth every minute it cost.
include/virtio.h moved out of the driver directory. Its own comment said it
should when a second reader appeared; one has.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md mechanism 3. A process asks for a device's interrupts with
PCIIOC_IRQ and then reads them, which is how Linux's uio does it and for the
same reason: a descriptor composes with poll, and a driver that stops reading
falls behind rather than losing events. read() returns a count rather than a
flag, so a driver that was busy sees it missed three and acts once.
Proven against an e1000e by asserting a cause through its ICS register and
reading the interrupt back out in userspace:
interrupts routed here (line 10)
interrupt delivered, count = 1
ICR = 0x80000004
0x80000004 is the cause the test set plus INT_ASSERTED -- the device's own
register, read by userspace as its acknowledgement.
**The masking is the design, not a detail.** A PCI line is level-triggered and
stays asserted until the cause is cleared at the device, which is a different
register on every chip and so is something only the driver can do. The kernel
masks the line on arrival and userspace's write() unmasks it. Signalling EOI on
a still-asserted line re-enters the handler immediately and for ever; this
kernel did exactly that by accident at 72,000 interrupts a second, and what it
looked like from outside was a clock running seven times slow (§13).
Which decides what happens when a driver dies mid-interrupt: the line is left
**masked**. The instinct is to unmask -- do not leave the device dead -- and it
is wrong, because unmasking an asserted line with no handler is a crashed
driver taking the machine down with it. Masked is safe and not permanent: the
next PCIIOC_IRQ arms it. Both halves verified by crashing a driver on purpose
and then starting another one.
A line already carrying kernel handlers is refused outright. Masking is
per-line, so handing out a shared one would silence whichever kernel driver is
also there, with nothing logged. MSI is the real answer and pci_msi_enable() is
already in the tree waiting for a caller.
Also fixed, found by running the crash twice: DMA buffers were never returned
when a process exited. The arena is 4 MB and contiguous, so a driver that
restarts a few times exhausted it -- "out of DMA memory, 3584 free" -- which is
a poor property for an interface whose whole promise is that a driver can crash
and come back.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md mechanisms 2 and 4: MMIO and DMA to a process.
A process can enumerate the bus, claim a device exclusively, map its BARs and
get memory the device can be pointed at. Proven end to end against an e1000e
-- the exact device class we cannot drive and would want a foreign driver for:
device 7: 8086:10d3 (network)
claimed
BAR0 at 0x81060000, 128 KB
regs[0..3] = 0x00140261 0x00000000 0x00080283 0x00000000
MMIO reaches the device
DMA 8 KB at virtual 0x40001000, physical 0x3f8eb000
Those are the e1000e's CTRL and STATUS with full-duplex and link-up set, which
is how you tell a real mapping from one reading 0xFFFFFFFF off an unmapped
address. Claiming a device the kernel drives is refused -- two writers of one
register set looks like hardware that has started lying -- and everything a
process held is released when it exits, because a driver that crashed must not
keep its hardware away from its replacement.
mmap's offset is the BAR's physical address, checked against the BARs of
devices *this process has claimed*. Without that check the device is /dev/mem
with extra steps and a process could map the kernel's own memory. Mappings are
write-through: a cached write to a doorbell arrives whenever the cache feels
like it, which from a driver's side is indistinguishable from hardware that
ignores you.
The interface is about PCI devices, not about any driver model, and its first
users will be SchOS's own drivers when virtio-gpu is evicted. That ordering is
the design rather than an accident: an interface whose first consumers are
native drivers is a general mechanism something foreign can use later, instead
of a hole shaped like something foreign.
Also: PROT_* and MAP_* moved to include/posix.h. They were defined only in
sys_mem.c, so cmd/fbinfo carried a private copy and this wanted a third --
two copies of a number the kernel compares against, where a mismatch shows up
as a mapping with the wrong permissions rather than an error.
No IOMMU, so this isolates a driver against its own bugs and not against its
own DMA. The plan says so at length and it is still true.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/init.md milestones I2 and I3. The rule change.
**I2 -- the heartbeat.** The failure the two-init scheme could not see is that
an init usually does not die, it *hangs*: wait() never returns for a process
that is merely stuck, so a supervisor watching a wedged init reports
everything normal for ever. PID 1 now pings every two seconds and expects an
answer within ten; silence means stuck, and stuck is worth acting on.
Exercised rather than reasoned about, as the plan asks: `sysrq w` wedges
schinitd by making the scheduler pass over it for ever. It stays alive, keeps
its descriptors and appears in every listing -- which is the point.
Two things that only showed up by running it:
- kill() sets a flag the target checks when it next runs, and the premise
here is that it is not running. Waiting for a corpse that may never be
produced turns the recovery path into a second hang. PID 1 replaces the
supervisor *without waiting*; the old one's socket is closed, so the moment
it runs again its first write fails and it exits.
- the replaced supervisor must notice the hangup. poll() reports POLLHUP and
never POLLIN again, so a loop that only looks for POLLIN sits there
complaining that PID 1 has stopped pinging it.
**I3 -- proc_reincarnate().** exit() on initproc panicked. Now the kernel
tears down nothing, keeps pid 1, and re-execs /bin/schinit in place with a
generation counter. The pid stays 1, so every orphan the kernel reparented is
still correctly parented; the children survive; the open files survive, which
is why this is the first line of exit() and not the last; and the job table
survives in /proc/schinit, which is what it is there for.
The escalation ladder: generations 2-3 carry on, generation 4 ignores
/etc/schinit and starts a console shell only -- a manifest that kills init
must not kill it for ever -- and generation 5 stops, with PSOGM rendering
INIT_RESURRECTION_FAILED, a call chain and a QR code.
Three bugs found by running it, each a lesson about exec():
- exec() returns 0 on success; it does not fail to return. The new image
starts when the kernel returns to userspace through the rewritten
trapframe. Returning from exit() is the success path.
- exit() was reached because `killed` was set, and the trap path checks it
again on the way out. Leaving it set exits the new image before its first
instruction: five generations in a few microseconds, a resurrection loop
that looks exactly like the crash it was meant to survive.
- exec() keeps open files, which is what gives the new image a console --
and also keeps the previous life's socket, holding the old supervisor's
channel up so it never sees a hangup.
Verified: `sysrq i`, and the shell being typed into keeps its pid across the
death and rebirth of PID 1, with /proc/schinit byte-identical either side.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/init.md milestones I0 and I1.
**The split.** schinit is PID 1 and does four things: bootstrap the
filesystems, fork schinitd, fork jobs on schinitd's behalf, reap children. No
manifest parsing, no filesystem walking after boot, no allocation. It is the
one program on the machine with no supervisor, so it is written to be too
boring to fail.
schinitd is PID 2 and holds everything else -- /etc/schinit, respawn policy,
throttling -- and is restartable, which is where the bugs are allowed to be.
**Jobs are forked by PID 1, not by schinitd.** That is the load-bearing
detail. schinitd decides and asks; PID 1 acts. So every job is a child of PID
1 at all times, and a supervisor that dies orphans nothing, reparents nothing
and restarts nothing.
**/proc/schinit** is the job table, written by PID 1 whenever it changes. The
kernel holds the text and does not interpret it: a procfs generator runs in
the kernel, and walking PID 1's memory to answer a read would put a userspace
program's format into the kernel, where it would rot.
Verified the way the plan asks for -- `kill 3`, then look:
schinitd: adopting os.schos.console-shell
schinitd: adopting os.schos.tty2-shell
/proc/schinit byte-identical across the restart, same pids, same cookies, same
start times, and the shell being typed into never noticed.
The first attempt got I1 wrong in the instructive way: PID 1 published the
table and schinitd never read it back, so the restarted supervisor started
everything a second time -- two console shells on one terminal, which is the
split-brain this plan rejects the two-init scheme for, reached by a different
road. Publishing state is half of it; coming back and believing it is the
other half.
The protocol is include/schinit.h: fixed-size messages, versioned in the
hello, entirely internal. Fixed-size so PID 1 never allocates, and a
supervisor that has gone mad cannot make it run a parser.
Still to come: I2 (heartbeat both ways, so a hang is as detectable as a death)
and I3 (proc_reincarnate, the actual law change).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The sweet spot was available the whole time and I ruled it out by writing
"AltGr+anything" when the true statement is "AltGr+*letter*".
A Polish layout wants AltGr with a letter -- ą ć ę ł ń ó ś ź ż. AltGr with a
function key produces nothing on any layout, no window manager binds it, and
no application asks for it. It is the one combination the host, applications
and the keyboard layout all leave alone, and the previous three commits talked
themselves out of it on a technicality that was mine, not the hardware's.
Verified rather than argued, with QEMU sendkey and screendump hashes:
AltGr+F2 -> tty2
AltGr+F1 -> back, pixel-identical to the start
AltGr+a -> reaches zsh, so ą still types
That distinction is only expressible because Right Alt became its own modifier
bit two commits ago. Sharing ALT is harmless for typing -- neither is used to
look up a character -- and made this impossible to say.
Also added, since it was asked for in the same breath: minus and equals step
to the previous and next terminal, on whatever the chord's modifiers are. They
skip terminals that are not in use -- the same `opened` count VT_GETSTATE
reports -- because six terminals with two shells on them means four blank
screens in between, and cycling past those is worse than not having the key.
AltGr+= -> tty2, again -> wraps to tty1 (only two in use)
AltGr+- -> tty2
chvt -c still moves all of it, and `chvt` reports both halves.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Third guess at a chord, and the third one would have been wrong too: a display
manager that grabs Ctrl+Alt+F<n> matches loosely, so Ctrl+Alt+Shift+F2 never
reaches the guest either. Extra modifiers do not get past a loose grab.
The real problem is that this is not knowable from inside. A key the host
swallowed is indistinguishable from a key nobody pressed, so the guest cannot
probe for a free combination, and there is no combination that is free
everywhere:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6 (loosely matched),
Ctrl+Alt+digit (QEMU's own console tabs)
APPLICATIONS want Alt+anything (Meta -- zsh binds Meta-digit as
digit-argument), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter
So it is a setting. VT_SETCHORD/VT_GETCHORD, and in userspace:
chvt -c ctrl+shift+F Ctrl+Shift+F1..F6 (the new default)
chvt -c ctrl+alt+shift+F
chvt -c alt+1
chvt -c off no chord; chvt N is then the only way
chvt report the active terminal and the chord
`off` is a legitimate setting rather than a failure mode. On a machine whose
host grabs everything worth binding, `chvt N` is the honest answer.
The default moved to Ctrl+Shift+F1..F6: display managers bind Ctrl+Alt+F<n>,
not Ctrl+Shift+F<n>, and Ctrl+Shift with a *function* key is not a character
on any layout -- unlike Ctrl+Shift+digit, which is.
Caught while writing it: VTC_RALT was 0x08 while kbd.h's RALT is (1<<7), since
(1<<3) is CAPSLOCK. A chord set from userspace with AltGr would simply never
have matched, and the only symptom would have been a key that does nothing.
A _Static_assert now holds the two headers together.
Verified: Ctrl+Alt+F2 leaves the screen byte-identical, Ctrl+Shift+F2 switches,
Ctrl+Shift+F1 returns to a pixel-identical tty1, and chvt -c round-trips
through alt+1 and off and back. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+1..6 was a worse choice than the Alt+F-keys it replaced, and the reason
is the one that matters: anything the kernel swallows is taken from every
program that will ever run here, permanently.
Alt+<digit> is Meta-digit. zsh's own line editor binds it as digit-argument --
Alt+1 Alt+2 x repeats x twelve times -- and every readline editor does the
same. Yesterday's chord broke that system-wide, which is exactly the failure
mode of picking a chord applications want.
Working the whole space instead of one axis of it:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6
APPLICATIONS want Alt+anything (Meta), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter -- Polish diacritics
Ctrl+Alt+Shift+F1..F6 is in none of those sets. Display managers bind the same
chord without Shift, so adding it steps out of the host's way, and no terminal
application binds a triple-modified function key.
Which chords actually reach a guest was measured rather than assumed: a
temporary probe in kbdgetc logged every modified keypress and QEMU's sendkey
fired each candidate at it. Everything reached the guest, Ctrl+Alt+F2
included -- so that conflict is the host's display manager, not QEMU. The same
probe corrected an earlier claim: `sendkey altgr-2` produces no event at all,
so the previous commit's "AltGr+2 did not fire" was never actually tested.
And the escape hatch is real now. VT_SETMODE was accepted and ignored, so a
program could ask to own the chord, be told yes, and still not get it.
VT_PROCESS genuinely stops the kernel switching. Together with the EVIOCGRAB
path -- which kbdgetc already checks before the chord is recognised -- there
are three honest layers: nothing, VT_PROCESS, exclusive grab.
What VT_PROCESS still does not do is the VT_RELDISP handshake; struct vt_mode
carries relsig/acqsig for when Schcom needs to release the GPU before the
screen changes hands.
Verified by screendump hash: Alt+2 reaches zsh as Meta, Ctrl+Alt+F2 and
Ctrl+Shift+F2 leave the screen untouched, Ctrl+Alt+Shift+F2 switches.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+F1..F6 was wrong in three separate ways, and the third is the one that
matters most here.
Alt+F4 the host window manager closes the QEMU window
Alt+F2 GNOME and KDE open a run dialog
Ctrl+Alt+F1..F6 the host switches its *own* virtual terminals
AltGr+anything Polish diacritics -- a c e l n o s x z with their marks --
and on some setups AltGr is delivered as Ctrl+Alt
Ctrl+Shift+key widely bound inside applications
Scroll Lock not present on many keyboards
Alt+1..6 survives all of it: the number row, so no function key is involved,
and left Alt, so AltGr is untouched.
Right Alt is tracked as its own modifier bit now. It used to share ALT, which
is harmless for typing -- neither is used to look up a character -- and wrong
for chords, because it made AltGr indistinguishable from Alt.
And the test is an equality rather than a mask:
if ((shift & (CTL | SHIFT | ALT | RALT)) == ALT && ...)
`shift & ALT` fired on Ctrl+Alt+1 and AltGr+1 as well, so a chord aimed at the
host -- or an ordinary Polish keystroke -- would have switched terminals
behind your back. That was a real bug in what shipped yesterday.
Verified with QEMU's sendkey, comparing screendump hashes:
start (tty1) 86cee2284878
Ctrl+Alt+2 86cee2284878 identical -- did not fire
AltGr+2 86cee2284878 identical -- did not fire
Alt+2 114562804a78 switched
Alt+1 86cee2284878 back, pixel-identical to the start
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Three symptoms, two causes, both in the terminal layer.
**The grid and TIOCGWINSZ disagreed about the size.** vt_init() sizes every
grid from gfx_cols()/gfx_rows(), and it runs at main.c:75 -- while the display
driver attaches its scanout from the PCI bus walk at main.c:99. So the grids
were the 80x24 fallback, and TIOCGWINSZ, which computed its own answer live,
said 160x50.
That one disagreement produced all three things visible in the report: text
stopped two thirds of the way down the screen, `ls` laid out 160 columns into
an 80-column grid so words split across the wrap ("vers" / "ion"), and zsh's
cursor tracking was wrong on every line.
Fixed in two places, because either alone would leave the trap set:
gfx_attach_scanout() now calls vt_resize(), so the grids learn the real screen
the moment there is one; and TIOCGWINSZ reports v->cols/v->rows rather than
measuring again. One number, from the terminal being asked.
**Wrapping was eager.** A glyph printed in the last column moved the cursor to
the next line immediately. Real terminals set a pending-wrap flag and wrap when
the *next* glyph arrives -- which is why a line exactly as wide as the screen
takes one row and not two, and why a program can write the bottom-right cell
without scrolling.
zsh's partial-line marker depends on that rule directly: it writes exactly
COLUMNS-1 spaces and expects to still be on the line. With eager wrap it left a
reverse-video '#' above every prompt, which is the hashtag in the report. Both
are gone.
Verified by screendump: `ls /proc` now fits one line with "version" intact, no
markers, and output fills the screen to the last row. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Porting zsh found four defects in the kernel and one in the filesystem. None
of them were about zsh; all of them had been there the whole time.
**exec threw the environment away.** kernel/fs/exec.c wrote a single zero for
envp with the comment "(no environment)" -- not yet, but ever, for every
process. musl has been passing a perfectly good envp to execve (Linux 59, which
SchOS answers) and it was never read. So $TERM was unset, $PATH was whatever
each program invented, and a variable exported in a shell did not survive the
exec meant to carry it. exec() takes an envp, sys_exec reads argument three,
and schinit manifests grew an Environment key. The userland two-argument
exec(path, argv) stays as a wrapper that passes null explicitly -- the raw stub
is execve now, so a short caller cannot leave %rdx holding a stray pointer.
**Which overflowed the kernel stack.** Three pointer arrays, ~1.8 KB, on a
4096-byte stack, under exec -> loaduvm -> readi -> SchFS -> btree. Pid 1 went
down on the first exec. The canary caught it and named the process, which is
what it is for. They live in one kalloc'd page now.
**waitpid returned a bare -1** for both "no children" and "interrupted". musl
reads [-4095,-1] as -errno, so userspace saw EPERM; zsh printed "wait failed:
operation not permitted" and abandoned the rest of /etc/zsh/zshrc. -ECHILD and
-EINTR now. Third time a bare -1 has cost real time -- on a system with no
permission model, EPERM should be read as "a syscall returned -1".
**NVMA was 64.** musl's allocator takes a mapping per size class and does not
release them eagerly, so compinit ran out of slots and got -1, which is EPERM,
which malloc turns into NULL, which zsh reports as "fatal error: out of memory"
-- on a machine with 1000 MB free. 256 slots, and -ENOMEM.
**And a small write to SchFS costs 58 ms.** 200 writes to one open file take
11.75 s; the same to /dev/null take 0.14 s. That is the design stated at the
top of kmount.c -- one transaction group per operation, and a commit is two
flushes and an uberblock -- not a bug. But compdump writes its digest with
thousands of separate prints, so it takes minutes and looks like a hang.
compinit -D, which skips the dump, finishes in 3.6 s. This one is a decision
rather than a fix, so it is written up and left: /etc/zsh/zshrc keeps compinit
switched off and explains exactly why, with the measurements.
zsh runs as /bin/zsh and is the console shell. ZLE works -- arrow keys recall
history through terminfo, $COLUMNS reads the real 160 because TIOCGWINSZ was
fixed, colour and prompt expansion work, startup is 0.14 s. mksh keeps /bin/sh,
so schinit's no-jobs fallback is a different program from the one that could
have failed.
Also fixed while here: AT_CLKTCK was the literal 100 and is USER_HZ; the
extract rule in four ports could move a source tree inside itself when make
re-ran it, which is how zsh's configure came to write modfile=zsh-5.9/... into
config.modules and fail three steps later.
schfs-check passes. Full writeup in docs/history/kernel.md section 14.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The point is not a disclaimer, it is the argument: the tool is not the measure
of a project. Code nobody understands is bad code whoever typed it, and code
whose every decision can be explained is good code by the same standard.
Placed next to a link to history/ on purpose. That directory is where the
claim can be checked -- the bugs are written up in full, including the wrong
hypotheses and the measurements that killed them. An explanation you can
follow is the evidence; a byline is not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Two additions to docs/Website.
**The reader.** docs.html renders the 29 documents in docs/ in the site's own
theme -- index down the left, table of contents down the right, and links
between documents rewritten so ../history/schfs.md navigates inside the
reader instead of downloading a file.
The parser is ~150 lines in docs.js, not a dependency: it handles exactly
what docs/ uses, and a Markdown library would outweigh every other asset here
combined. Everything is escaped before a tag is emitted, so the only HTML
that reaches the page is HTML docs.js wrote. Verified by rendering all 30
documents (302 KB of Markdown) with zero failures, no unrestored sentinels
and no runaway loops.
One caveat, stated in the page itself rather than hidden: browsers block
fetch() on file:// URLs, so this page needs a server. It says so, with the
command, and offers the raw file as a fallback. The rest of the site is
unaffected.
**The flag.** A Progress Pride flag in the top bar and a line in the footer,
on both pages, permanently. Support with an end date is marketing. It is
deliberately small and deliberately not a page of its own -- this is an
operating system, and the flag is a statement, not a subject.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
index.html, style.css, app.js and the three marks. No build step, no
dependencies, no framework -- it opens from a file:// URL.
The palette is not a design decision: it is include/theme.h transcribed,
including the rule that header enforces. PSOGM purple appears exactly once,
on the crash-screen section, because branding/README.md says a colour used
everywhere means nothing. The typefaces are Roboto and JetBrains Mono, both
already in ports/ and both requested from the system rather than downloaded --
a font file would outweigh the rest of the site.
The boot log in the hero is real lines from a real boot. The script is
decoration and the page is complete without it; it does nothing at all under
prefers-reduced-motion.
The feature tags (runs / in progress / designed) are a promise, and the
README says so: anything marked `runs` is in the tree and works today.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported 3 seconds of uptime after 15 real ones, `time` claimed
3.12s for a 20-second command, and ping's one-second interval was closer to
six. One cause, not three: `ticks` was advancing at ~14.5 Hz instead of 100.
It was not the timer. virtio-gpu-pci shares IRQ 11 with the e1000 and
registered no interrupt handler at all. PCI INTx is level-triggered, so the
device held the line asserted, the kernel signalled EOI, and it fired again
immediately -- 72,000 interrupts a second, 83% of CPU0, starving the tick.
The e1000's handler read ICR as zero half a million times, correctly
answering "not mine", which is what made it look like a network-free problem.
Reading virtio's ISR byte clears it and drops the line. That is the fix.
irq_dispatch now measures each line's rate against the TSC -- not ticks,
which is the first casualty of a storm -- and names the attached handlers
once above 20000/s. It reproduces the original fault as a single line.
Found along the way, and fixed because they were real:
- lapicinit loaded TICR with xv6's uncalibrated 10000000, whose own comment
admitted it was never measured. calibrate_timers() now measures the LAPIC
and the TSC against the 8254 PIT. (It came back at 999.9 MHz, so this was
not the bug -- but the next machine is not obliged to be 1 GHz.)
- microdelay() was an empty function body. Every microdelay(1000) in the
xHCI reset path and the USB hub power-on sequence returned instantly.
- HZ is a constant in param.h now, not the literal 100 written out at a
dozen ticks-to-seconds conversions. USER_HZ is separate and deliberately
does not follow it: musl answers sysconf(_SC_CLK_TCK) with 100 always, so
times() and /proc/stat scale at the syscall boundary the way Linux does.
- TIOCGWINSZ answered a hardcoded 24x80. gfx_cols()/gfx_rows() have known
the real geometry all along; at 1024x768 the console is 128x48, so every
program that lays out a screen was formatting for the wrong one.
- TCFLSH fell through to the catch-all `return 0`, claiming to discard
input without discarding any.
uptime now advances 5.01 seconds per 5 real seconds. schfs-check passes.
Full investigation, including the two wrong hypotheses and the measurement
flaw that protected them, in docs/history/kernel.md section 13.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A fresh boot spent 2600 ms in schinit's bootstrap() before printing its first
line, and the whole of it was device nodes. Measured rather than guessed: an
instrumented bootstrap reported 2600 ms on a fresh image and 0 ms on the next
boot, because the nodes already existed by then and mknod failed fast. The cost
was therefore invisible to anyone not building images -- which is to say,
invisible to everyone except whoever works on this.
Each node was a real inode on the root filesystem, and SchFS commits every
mutation as its own transaction group: a copy-on-write rewrite of the path to
the root, then an uberblock behind a cache flush. Twenty of those is seconds.
The duplication mattered more than the time. Major and minor numbers are the
kernel's -- devsw[] in kernel/dev/cdev.c is what they dispatch on -- and schinit
held a second copy of that mapping with nothing checking the two agreed. Adding
a character device meant editing a userspace program, and a wrong minor produced
a node that opened successfully and did nothing.
kernel/fs/devfs.c puts the table next to the thing it describes and serves /dev
behind the same fs_ops vtable procfs uses. The namespace is all it provides:
fileread and filewrite see T_DEV and go through devsw themselves, so a read
never reaches it. It is read-only, and dirlink and ialloc answer EROFS rather
than pretending -- a node exists because the kernel has the device, or it does
not exist.
This also makes /proc/filesystems true. It has advertised "nodev devtmpfs" for
as long as it has existed, against a kernel that had no such filesystem.
Two things found while measuring what remained:
* The thirteen mknod() calls for /proc ran *after* the procfs mount, so every
one was resolving a path into a read-only synthetic filesystem and failing.
procfs.c's own note called them a fallback to be cleaned up later; they have
been dead for longer than that.
* The four mkdir() calls for mount points were the rest of it. They are made
by the image builder now (sysroot-install), and the ones in init are a
fallback -- a mkdir that fails because the directory exists costs a path
walk and no writes, where creating one costs a transaction.
bootstrap() is now 0 ms on a fresh image, down from 2600.
init opens /dev/console after the mount rather than mknod'ing a node called
"console" into the root directory, which is what used to leave a stray /console
in `ls /`. The old path is kept as a fallback: if the mount fails there is no
/dev/console and no way to report it.
socktest passes, /proc still lists per-process directories, ps -e still
enumerates.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
"net: eth0 10.0.2.15/255.255.255.0 via 10.0.2.2" arrived on the display seconds
after the prompt did, so the first thing anyone saw after booting was the kernel
typing into their session. It lands wherever the cursor happens to be -- in the
middle of a command, a fastfetch, or later a compositor's output.
console_takeover() hands the framebuffer to userspace on the first exec, and
after that the screen belongs to whoever is using the machine. cons_serial_only
already encodes that rule for the boot path -- "the display is the product; the
serial line is the diagnostics" -- and it starts set for exactly this reason.
What was missing is the rule for messages that cannot be timed to happen before
userspace starts, because they are waiting on a network.
klog() is that: the serial port only, whatever cons_serial_only currently says.
A macro rather than a function, because cprintf's varargs cannot be forwarded --
there is no vcprintf, and adding one to duplicate the formatter would cost more
than it buys. cprintf holds cons.lock for the whole message, so the flag cannot
be observed half-changed by another CPU printing at the same time.
Nothing is lost. The line still goes out the UART, which is where bootcheck
reads it from and where you want it when something is wrong, and a person who
wants to know their address reads /proc/netif.
Verified by screendumping the framebuffer after a boot and two fastfetch runs:
no interruption on screen, still one occurrence on serial.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Two ANSI bugs, both found by running fastfetch rather than by reading the
parser, and both invisible to anything that spells its escapes out in full.
ESC[m with no parameters means ESC[0m. ECMA-48 is explicit that an omitted
parameter takes its default and SGR's default is 0, and sgr() iterated its
parameter list -- which is empty in exactly that case, so the loop body never
ran and the reset was silently dropped.
Programs emit the bare form constantly. fastfetch writes "\x1b[32m1%\x1b[m", so
everything after the first coloured character stayed green forever. With a
background colour it is much worse: its palette swatch sets a white background
and resets, the reset did nothing, and the console went white-on-white and
stayed there -- filling the screen with white rectangles as it scrolled, which
looks like a corrupted framebuffer rather than one missing branch.
OSC sequences were not a state at all, so ESC ] fell through and the payload
printed as text: a hyperlinked path arrived as "Disk (]8;;file:///\]8;;\)".
Nothing here acts on an operating-system command -- there is no window title and
no hyperlink to follow -- but *discarding* one is not optional, because the
alternative is printing somebody's URL into the middle of their output. ESC \
ends it, and an ESC followed by anything else is handed back to the escape state
rather than eaten, so a malformed OSC does not swallow the sequence after it.
Verified by screendumping the framebuffer after two consecutive fastfetch runs:
identical output both times, near-white coverage down from most of the screen to
2% (the palette swatch's own white cell), and the disk line reading "Disk (/)".
Also installs docs/branding/Ascii/ascii_50.txt as /usr/share/schos/logo.txt --
Shift as characters, at the width that leaves room for an info block on an
80-column console. Installed from the branding directory rather than copied into
sysroot by hand, so there is one source.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported "getifaddrs(&ifAddrStruct) failed", and the right answer to
that is not a patch to fastfetch. Asking what interfaces a machine has is
something every networked program does, and on Linux there is exactly one way:
a NETLINK_ROUTE socket. musl implements getifaddrs() over it, so a libc call
that looks like a syscall is really a small protocol conversation -- and without
this side of it every caller fails the same way.
kernel/net/netlink.c is a responder rather than a general socket family. No
event stream, no multicast groups, nothing subscribes to link state: a request
arrives, the whole answer is generated into the socket's buffer, and reads drain
it. That shape is chosen, not a shortcut -- getifaddrs sends a dump and reads
until NLMSG_DONE with MSG_DONTWAIT, so generating at send time means a read
never blocks and the non-blocking flag is honoured for free.
RTM_GETLINK returns one RTM_NEWLINK per interface with IFLA_IFNAME and
IFLA_ADDRESS; RTM_GETADDR returns one RTM_NEWADDR per address with IFA_ADDRESS,
IFA_LOCAL and IFA_LABEL. Anything else gets a bare NLMSG_DONE, because the
caller's next move is a read either way and an unexpected error message is worse
than nothing to read.
The data is not netlink's. Interfaces come from the netdev class and addresses
from lwIP's netifs, exactly as /proc/netif reads them; nothing in the file knows
what an e1000 is. Interface indices matter more than they look -- getifaddrs
matches address records to link records by index, so the two dumps have to
agree. Loopback is 1, netdevs follow from 2.
Verified by reading it back through musl rather than by inspecting the bytes:
lo flags=0x49 fam=-1
eth0 flags=0x1043 fam=17 (AF_PACKET, the MAC)
lo flags=0x49 fam=2 addr=127.0.0.1 mask=255.0.0.0
eth0 flags=0x1043 fam=2 addr=10.0.2.15 mask=255.255.255.0
Correct flags, addresses and netmasks, and the link records pair with the
address records.
One thing this does not close: fastfetch's Local IP module defaults to
default-route-only, which calls ffNetifGetDefaultRouteIfName() and reads
/proc/net/route. SchOS has no routing table and no such file, so the module
still shows nothing -- now for a reason that is about routing rather than about
enumeration. That is the next file to provide.
socktest still passes; the AF_UNIX and AF_INET paths are untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Boot died straight after "exiting boot services" with a KVM internal error,
RIP=0x801a5dc5 and RBX=0x80000000 -- the framebuffer base. The bytes at RIP were
0x0C0E13 and 0xD1D5DC: SCH_BG and a grey from the splash's metal gradient. The
machine was executing the picture of itself starting up.
The hand-off to the kernel writes rbx and did not say so:
"mov %1, %%rbx\n\t" <- writes rbx
"jmp *%2\n\t"
: : "r"(PML4_ADDR), "r"(fb), "r"(entry)
: "memory"); <- rbx not declared clobbered
With rbx absent from the clobber list the compiler may allocate an input there,
and clang 21 allocated `entry`:
movq %rax, %cr3
movq %rcx, %rbx <- the framebuffer, into rbx
jmpq *%rbx <- %2 was rbx, and now holds the framebuffer
Declaring "rbx" forbids the allocation. Verified in the generated assembly
rather than by reasoning: jmpq *%rbx became jmpq *%r14, and the machine now
boots through to schinit: ready.
This had been latent since the loader was written. It worked only because every
compiler that had built it happened to choose a different register, and it
surfaced the first time the binary was relinked with a different clang -- which
only happened because the previous commit fixed the Makefile dependency that had
been leaving the loader stale. A stale artifact hides the bug the fresh one
reveals.
It is also the third time this project has been broken by a register the code
depends on but never asks for: docs/history/kernel.md section 4 (the BIOS
loader passing the framebuffer in EAX by luck) and section 8 (%fs:0 used as
scratch when the ABI reserves it). Written up as section 7b, with the one-line
recipe that settles all three -- read the generated assembly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
make falls back to the GNU toolchain when clang is absent, and that works for
the kernel. It does not work for the UEFI loader: BOOTX64.EFI is PE/COFF and
wants clang plus lld-link, so a machine with only gcc gets a kernel that builds
and a loader that silently stays whatever it already was.
That is not hypothetical -- it is what left a stale boot splash on this tree for
half a day. The mask in include/logo.h was the new mark, the kernel drew it, and
the loader kept drawing one compiled months earlier because nothing could relink
it and nothing said so.
shell.nix declares everything docs/guides/building.md lists, and building.md
gains a NixOS section saying why using it matters rather than just how.
Verified: with clang 21.1.8 and LLD 21.1.8 the loader relinks and the splash
draws Shift in metal, screendumped from the framebuffer rather than inferred.
Pinned to the host's nixpkgs rather than a flake input, deliberately. This is a
convenience for a development machine, not a reproducibility claim; if it ever
needs to be the latter it wants a flake and should say so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
PSOGM drew ":(" -- two dots and a parenthesis. It now draws Guru, the icon from
docs/branding/: a chamfered head with two eye knockouts and a flat mouth, in the
:| register.
The old reasoning is kept in the file rather than deleted, because it is the
thing being traded away: ":(" was "legible as a mood without being a picture of
anything, and does not pretend the machine has feelings about what just
happened." That is a real argument and a face is a louder claim. What it buys is
identity -- ":(" is recognisably Microsoft's, and a crash screen is the single
screenshot most likely to leave the machine, so it is the worst place to be
wearing somebody else's face. The octagon also quotes the chamfered corners of
the old SchOS letterforms, which is the only part of that mark still in use.
Still drawn from primitives, for the original reason: it scales with the display
and costs no space in the kernel image. A scanline fill for the head, two
rectangles and one more knocked out of it -- no allocation, no locks, nothing
that can fail halfway, which is the whole constraint of panic context. The
geometry is expressed in the same 200-unit box docs/branding/guru.svg uses so
the two cannot drift without somebody editing a number on purpose.
The eyes and mouth are knocked out of the head rather than drawn on top of it,
which is what keeps them legible small: a hole in a solid reads at sizes a
stroke does not.
Verified by crashing on purpose -- echo c > /proc/sysrq -- and screendumping the
framebuffer through the QEMU monitor. The serial report still says ":(", and
should: Guru cannot be drawn in ASCII, and a mood marker in a log is not the
icon.
Separately, and found by looking at the boot splash rather than at the code:
boot/common/ui.c includes logo.h, theme.h and font.h, and the Makefile rule for
the loader listed none of them. A new logo therefore did not rebuild the loader.
The splash had been drawing a mask compiled six hours earlier while `make`
reported nothing to do, and the only symptom was a boot screen quietly
disagreeing with the kernel about what the logo is. The kernel half never showed
it because those objects are built with -MD -MP and track their own headers.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Shift is the logo, Guru is the icon, SchCotie is the mascot, and the difference
between them is not stylistic. An icon works once, at one size, in one state. A
mascot has to be able to *do* things -- confused, pleased, asleep, seen from
behind -- which is why it costs more and is drawn last. Written down because
this is exactly the kind of decision that gets re-derived badly.
Assets/ becomes docs/branding/, which also fixes two things:
* Filenames had spaces in them, so every reference needed quoting. They are
lowercase and hyphenated now.
* Assets/ held hand-written SVG and generated PNG in one directory, which is
the one rule docs/guides/layout.md states.
The guide records what was previously only in people's heads:
* The constraint everything answers to -- include/logo.h is a 128x128
single-channel coverage mask, so a mark has to survive as a solid shape in
one colour and be recognisable at 24 px. Colour is the last decision, never
the first.
* Guru's purple is load-bearing. PSOGM_BG #4B1D9A is deliberately not the
accent #7C5CFF, and theme.h's rule is that the full-bleed purple belongs
entirely to failure. If Guru appears in accent violet on a sticker, the deep
purple stops meaning "the machine stopped" -- and it is the only colour in
the system that means anything.
* Why shift-mask.svg is a separate file from shift.svg. mklogo.py reads ink as
(255 - luminance) * alpha, so tones survive as coverage and the relationship
inverts: darkest here is brightest on screen. Copying the violet fills would
light the object from below.
* Why a raster is committed beside its SVG. inkscape is not a build
prerequisite, so requiring a vector rasteriser would break the build on most
hosts for a file that changes about once a year.
* That the BSD daemon is copyrighted and SchCotie must be drawn from the
concept rather than from Beastie. A daemon is a Greek daimon and a Unix
background process; neither is ownable. The pitchfork, the sneakers and that
face are.
Format rule: SVG, or PNG at high resolution with no lossy compression, nothing
else. SVG is the source of truth for every mark and a raster is generated from
it, never edited.
include/logo.h regenerates byte-identical from the new path -- only the source
comment differs. The two old wordmark SVGs were deleted outside this session and
are left deleted; their PNGs are kept as superseded-*.png for reference.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A leaf's value area holds variable-length records end to end, so a record begins
wherever the one before it finished -- a multiple of 8 only by luck. The code
reads them by casting a pointer into the block, which tells the compiler they
are aligned when they are not.
That works on x86, which is why it has never shown as a bug, and it is undefined
in C. A compiler entitled to assume 8-byte alignment may emit an instruction
that requires it, and the failure would arrive at a different optimisation level
or on a different architecture looking like filesystem corruption rather than
like codegen. UndefinedBehaviorSanitizer reported 31 of them across obj.c,
objw.c, attr.c and space.c.
Seven types now carry SCHFS_PACKED: dirent_rec, extent, extref, index_rec,
attr_rec, snap and inode. Two of those -- attr_rec and inode -- were never
reported, because schfs_objtest does not reach an unaligned instance of either.
They were latent rather than absent, and casting into a leaf is the same lie
whether or not a test has caught it yet.
NO ON-DISK LAYOUT CHANGED, and that was measured before the annotation was
applied rather than assumed: every one of these already carries explicit `pad`
fields and therefore has no implicit padding, so sizes and member offsets are
identical with and without it. Seven _Static_asserts now pin the sizes, because
a record that silently grows misreads every existing volume from that point on
and looks like corruption rather than like a struct that changed.
schfs_node_hdr, schfs_item, schfs_kptr and schfs_uberblock are deliberately left
alone. The node header is exactly 32 bytes, so the items and key pointers after
it are already 8-aligned, and annotating them would cost byte-wise access on the
tree's hottest paths to fix a problem they do not have.
Verified by reading an image written before the change: schfs_fsck --check
passes on structure, checksums, key ordering, data blocks and derived free
space, and the kernel mounts its own root unchanged.
Also here: mkschfs passed a null pointer to qsort for an empty directory. Every
implementation ignores it when the count is zero; the standard does not say they
have to.
make schfs-check now runs with no sanitizer output at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Started as "fix the ASAN leak in schfs_objtest" and the test turned out to be
the messenger. The allocation map was taken through a palloc callback and there
was no way to return it: no schfs_space_release, and a comment in
schfs_space_init reading "caller frees what was taken" for an API the caller
did not have.
Three separate leaks from that one gap:
* The kernel leaked the entire map on every unmount -- up to 2 MB, at 8 KiB
per GiB of volume -- because kmount_unmount flushed, cleared `mounted` and
walked away. This is the one that matters; the others are test-only.
* schfs_space_init stranded a page on its own error path. npages was raised
only after *both* of a pair of allocations succeeded, so a failure on the
second left the first outside the count -- unreachable to any cleanup that
could later exist.
* schfs_objtest leaked 2121728 bytes in 518 allocations, which is what made
the whole SchFS suite exit non-zero regardless of its assertions.
The map now carries its own pfree rather than taking one at release time, so it
can only ever be freed by the allocator that filled it -- the kernel's pages
come from kalloc and a host tool's from calloc, and the two are not
interchangeable. schfs_vol_open and schfs_vol_format release any map the volume
is already holding before building another, which is what stops a re-open
leaking; struct schfs_vol must therefore be zeroed before first use, and the
header now says so.
The test's own leak was the last one found and the simplest: it does
memset(&VOL, 0, sizeof(VOL)) before reopening, which wiped the map's pointers
before vol_open could release them. Eight of those, each now releasing first.
schfs_objtest asserts the balance -- 520 pages taken, 520 given back -- because
a suite that leaks cannot detect a leak: the filesystem's own allocations would
arrive as noise inside the harness's. The next one fails the run instead.
make schfs-check now exits 0. The 31 UBSAN misalignment reports are still
there and are still a Gate 0 item.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Two failures found by running `make schfs-check` rather than by reading it, both
predating the current work -- confirmed by stashing the session's changes and
re-running to byte-identical output.
* AddressSanitizer: 2121728 bytes leaked in 518 allocations, every one from
md_palloc in tools/schfs_objtest.c, the test's own page allocator. The
target exits non-zero, so the whole suite fails whatever the assertions say.
The cost is not the memory -- it is that a real leak in the filesystem would
now arrive as noise inside 2 MB of expected noise.
* UndefinedBehaviorSanitizer: 31 misaligned accesses across obj.c, objw.c,
attr.c and space.c, one root cause. Records are read by casting a pointer
into a tree leaf, and a record's offset within a leaf is not a multiple of
8. This works on x86, which is why it has never shown as a bug, and it is
undefined in C: a compiler entitled to assume 8-byte alignment may emit an
instruction that requires it, and the failure would then look like
filesystem corruption rather than codegen.
Recorded as Gate 0 items rather than as nice-to-haves for one reason: a suite
that is red for known reasons stops being read, and then it is red for unknown
reasons too. guides/testing.md now says so up front, so nobody reads the [ok]
lines and ignores the exit code.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The network thread waited on the timer and nothing else, so a frame that landed
just after a poll sat in the ring for up to 10 ms -- the largest fixed latency in
the system. That was deliberate when the stack was new (a receive path woken by
an interrupt is much harder to debug than one that is asked) and there is now a
working stack to compare against, which is exactly when it becomes safe to do.
The frame is still *pulled* by the thread through .receive. It has to be: a call
into lwIP can reach the driver, the driver can sleep on the buffer cache, and an
interrupt handler may do neither. netdev_rx_signal() delivers nothing and reads
no ring -- it only ends the wait early.
The wait stays on the timer tick rather than moving to a channel of its own, and
that is the design. lwIP's timers must still run when the link is silent, so the
clock has to remain a floor under the wait, and sleep() cannot wait on two things
at once. Joining the tick's existing wakeup costs nothing and leaves one wait
with one predicate.
rx_signal lives under tickslock for the same reason it gets no lock of its own:
sleep() releases tickslock atomically, so a driver setting the flag and waking
under that lock cannot lose the wakeup by arriving between the predicate test and
the sleep. A private lock would not be held across the sleep, and that window
would be back. Calling it from interrupt context is safe on the same terms the
timer handler already relies on -- acquire() disables interrupts, so a CPU
holding tickslock cannot be interrupted into it.
The e1000 signals on RXT0 (a frame or burst has landed) and RXDMT0 (the ring has
fallen below its threshold, which is when waiting for the clock hurts most).
Measured rather than asserted: /proc/netif reports wake_rx and wake_tick, and
across three pings rx_frames and wake_rx both went 2 -> 6 -- every received frame
woke the thread through the interrupt. wake_tick keeps advancing as the idle
floor, which is what lwIP's timers need. socktest still passes and ping is still
0% loss.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Same disease as the network stack, one subsystem over. kernel/dev/vga.c
was three things wearing one name: the owner of the framebuffer, a
bitmap drawing library, and the text console. Only the first is a
driver, and because they shared a file they shared a prefix -- so
panic.c drew the crash screen with vga_fill_rect, console.c printed with
vga_putc, /dev/fb0 handed out vga_fb_phys, and every one of those files
named a display driver it had no business knowing about.
Split three ways:
- kernel/drivers/gpu/vga/vga_fb.c owns the VBE framebuffer -- the mode
the loader programmed and handed over, the aperture, and the display
class vtable. It is a driver and now lives with the driver that
finds the card on the bus.
- kernel/dev/gfx.c draws: pixels, shapes, glyphs, the cursor, scroll,
the ANSI erase operations. It names no driver. The framebuffer
arrives through gfx_attach_scanout(), so a driver publishes what it
owns and this file draws on it without knowing what it is.
- include/gfx.h is the interface, and says why it is deliberately not
the display class: that one is about frames -- acquire, present,
vblank -- and the crash screen has to work when nothing else does.
main() no longer calls a display driver. platform_register_devices()
takes the framebuffer address and brings up whatever owns it, which is
where driver names belong; kernel/drivers/registry.c is the file whose
entire job is naming every driver in the kernel.
virtio-gpu got the e1000 treatment as well: instances in an array, the
instance hung on dev->priv by an `attached` hook, and every op reading
it rather than a file-static. It refused the second adapter outright
before, which is not hypothetical -- integrated plus discrete is an
ordinary laptop. The VGA driver deliberately has no such hook, and says
so: there is one framebuffer the loader programmed however many
VGA-class controllers the bus turns up, and a second one publishing the
same scanout is the truth rather than a bug.
Private headers moved next to their drivers: include/virtio.h and
include/xhci.h each had exactly one includer. include/ is for headers
the rest of the kernel needs.
Deleted rather than moved: consoleinit() programmed the sixteen ANSI
colours into the VGA DAC and disabled text-mode blink, by writing ports
0x3C0-0x3C9 from the console. The comment three lines above the colour
table already said this does nothing in a 32bpp linear mode -- there is
no palette to index -- so it was both dead and in the wrong file.
Verified, and this is a refactor so the evidence is that nothing moved:
- bootcheck -Fb -Net: 59 [ok], no failures. That covers the console
through every command, /dev/fb0's geometry, writing pixels through
write() and mapping the framebuffer through mmap.
- make crashshot: the crash screen renders exactly as before --
shapes, glyphs, logo and QR code -- which is the whole of gfx.c
exercised at once, in a panic, with the scanout attached by a driver.
- make schcom-test: five pixel assertions from the host oracle still
pass, so the display class and the compositor above it are unmoved.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The TCP/IP stack reached straight into the first driver anyone wrote.
net.c called e1000_present(), the lwIP glue was named netif_e1000.c and
called e1000_transmit(), and include/defs.h declared the driver's
internals to the whole kernel. The second NIC driver would therefore
have arrived with a near-identical copy of the glue file and a patch to
the protocol stack, which is the arrangement include/device.h was
written to prevent -- the e1000 even said so, with `.ops = 0, // no
class vtable yet; there is no net class`.
There is now. A driver publishes a struct netdev_ops -- transmit,
receive, mac, link_up -- and is finished: it never mentions lwIP, and
nothing above it learns its name. The display class was already this
shape; this is the same shape for networking, and the two now read the
same way in kernel/dev/device.c.
What that made possible immediately:
- One netif per bound device instead of one per driver. lwIP's glue is
netif_eth.c, it takes a struct device, and it holds up to NETIF_MAX
interfaces. net.c attaches every network device it finds and starts
DHCP on each, because which interface the network answers on is not
ours to decide.
- /proc/netif lists all of them, one block of fields each, with the
interface name and the driver that claimed it.
- The ARP self-test moved from the e1000 to the class. Nothing in it
was chip-specific, and it is the first thing anyone will want to run
against the next driver. Still `echo n > /proc/sysrq`.
- Private headers live with their driver: e1000.h was in include/,
where exactly one file could use it. The driver build now adds the
driver's own directory to the include path.
The e1000 also drives more than one card. Its probe() refused the second
outright, because there was a single static instance -- so a machine
with two of them drove one and silently ignored the other. Instances are
an array now, and the instance is hung on dev->priv by a new optional
`attached` hook that the bus calls once the device exists. probe() runs
before device_add(), so there was previously nowhere to put it; that is
the whole reason the hook exists rather than a line inside probe.
QEMU gets an explicit NIC on every target (QEMU_NET). The default device
happens to be an e1000 on this machine type today, which is exactly the
sort of thing that stays true until a QEMU release changes it and the
network stops being exercised without anyone noticing.
Verified:
- bootcheck -Net passes, 48 [ok], no failures -- including the moved
self-test and two new checks that /proc/netif names both the
interface and the driver behind it, which together say the stack
went through the class rather than through a driver it was compiled
to know.
- Two NICs attached by hand (-device e1000 twice, second with its own
MAC): eth0 and eth1 both attach, each reports its own MAC in
/proc/netif, and each gets its own DHCP lease. Before this commit
the same machine produced one interface.
- make schfs-check still passes in full.
One trap worth recording: moving a header broke the build for anyone
with stale .d files -- make stopped with "No rule to make target
'include/e1000.h'". CFLAGS gains -MP, which emits a phony target per
header so a moved or deleted one can never wedge the build again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Phase 2's entry for the TCP/IP stack was edited in place when lwIP
landed, and the edit left the old decision text behind as an unchecked
box -- so the list carried an open item that was really a paragraph of
reasoning about a choice already made. The reasoning is worth keeping,
because it is the argument against writing TCP by hand later as much as
it was the argument then; it is no longer pretending to be a task.
What is recorded now: AF_INET's two debts are paid, bootcheck -Net
verifies the whole thing without anyone typing, and the two things that
remain are named -- accept() not reporting a peer address, and receive
still being polled on the timer tick rather than woken by the e1000's
interrupt. That last one is the honest limit on latency today, and
writing it down beats rediscovering it with a stopwatch.
Also: the e1000 path had not been updated for the drivers/ split.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
lwIP 2.2.0, fetched by ports/lwip and compiled straight into the kernel.
Not written from scratch, and the reason is not the packet formats: it is
congestion control, retransmission, window management and twenty years of
corner cases that only show up against a real peer. Not FreeBSD's
netinet either, though the licence would have allowed it -- that stack is
not a library, it reaches into mbufs, epoch(9), netisr, VNET and uma(9),
so adopting it means porting FreeBSD's kernel infrastructure first. lwIP
was written for exactly this situation: a small kernel with a raw
Ethernet driver and a port layer of a few hundred lines.
It is kernel code, so nothing is installed into the sysroot and there is
no second build system: the top-level Makefile compiles the files it
wants against our port headers. The file list is explicit rather than a
wildcard, because lwIP ships IPv6, 6LoWPAN, PPP, SLIP, DNS-SD and a dozen
apps in the same tree, and building what is not configured yields either
dead code or a link error naming a port function nobody meant to write.
Its sources are unmodified and its warnings are silenced for its files
only -- patching them would mean maintaining a fork.
The port layer is ours: a lock, a clock, the netif that hands frames to
e1000, lwipopts.h, and a shim/ directory of tiny headers so lwIP's
<string.h> and friends resolve to the kernel's functions instead of the
host's, whose prototypes disagree and would otherwise be found on the
default include path.
NO_SYS=1, so lwIP has no threads of its own and one kernel thread feeds
it. A thread rather than the interrupt handler, because a call into lwIP
can reach the driver, the driver can sleep, and an interrupt handler
cannot -- so the interrupt still only clears the cause register and the
thread polls. kthread_create is new and generally useful: a process with
a kernel-only page directory, no files, no cwd, no parent, dispatched
from forkret, which can therefore sleep and be preempted like anything
else. DHCP obtains an address at boot and the console says which one.
AF_INET went in exactly where phase 2 said it would. socknew dispatches
on the domain, kernel/net/inet.c implements the internet side on lwIP's
raw API, and not one syscall changed shape: bind, connect, listen,
accept, read and write reach the same descriptors they always did. TCP
and UDP both work. cmd/nettest opens a connection, writes, and reads the
answer back.
Two things are owed and named here so they are not discovered later:
recvfrom does not yet report the source address, and the socket paths
poll on the timer tick instead of sleeping on the socket. Both are
follow-ups, not redesigns.
NOTICE carries lwIP's BSD-3 text. Clause 3 is no-endorsement, not the
old advertising clause, so it sits with Apache-2.0 without difficulty.
Verified: the tree builds clean, and the headless boot check passes with
27 [ok] and no failures with the stack compiled in and the thread
running -- which is the part that would break first if netinit deadlocked
or the thread starved anything. An end-to-end connection test belongs in
that suite and is the next commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The last three phases of the filesystem, which were written together and
touch the same files throughout -- kmount.c, objw.c and vfs.c are each
rewritten by all three -- so they land as one commit rather than three
that could not be built separately.
Durability. A transaction that reaches the platter out of order is worse
than one that never reached it: the uberblock can name a tree whose
blocks are still in the drive's write cache. bdirty/bflush give the
buffer layer an explicit barrier, ideflush issues ATA FLUSH CACHE and
usb_storage_flush the SCSI SYNCHRONIZE CACHE that means the same thing,
and a commit now waits for the data before it writes the root that
points at it. The uberblock groups are read newest-first with fallback,
so a volume whose newest roots are torn mounts at an older one and says
which generations were lost.
Reflink. Extents carry a refcount, so two objects can name the same
blocks and neither frees them while the other holds them. Exposed as
FICLONE -- Linux's ioctl value, so `cp --reflink` works unmodified --
and as cmd/reflink for the case where there is no cp to hand.
Attributes, and the one genuinely new idea here. attr.c stores named
values on an object, reachable through setxattr/getxattr/removexattr at
Linux's syscall numbers. On top of that, schfs_index declares an index
over an attribute name and schfs_query answers "which objects carry this
value" from the B-tree rather than by walking. A query against an
unindexed attribute is refused with an error, never silently answered by
a full scan: a query that quietly becomes a scan is worse than one that
admits it cannot help. cmd/schattr drives both.
Three bugs fixed on the way, each found by the numbers being wrong
rather than by inspection:
- statfs's f_fsid was declared int64[2]. Linux's fsid_t is two *ints*,
so every field after it landed one slot late: userland read f_frsize
out of f_namelen, got 255, and df reported a 32 MB root filesystem
as 1992 KB. It hid for as long as it did because the fields used to
be invented constants, so wrong numbers looked like the usual ones.
- struct inode's nlink was a short against SchFS's uint32, so a file
past 32767 names came back negative -- and iput frees an object
whose count reaches zero. It is an int now, signed on purpose, so an
underflow lands somewhere a check can see rather than wrapping.
- filewrite split every write to fit v1's log. That limit belongs to
the journal, not to writing, and SchFS makes one transaction of
whatever it is handed: a 1 MB write was becoming 170 commits and
170 flushes for nothing. fs_ops carries max_write now, and SchFS
sets no limit.
Also here: a real mount table, so `mount -t schfs /dev/hdb /mnt` shows
up in /proc/mounts -- df looks a path up there before it calls statfs at
all, so a mount missing from that list was invisible to it -- several
volumes mounted at once, snapshots mounted by name, and /proc/fsstat
with an rdtsc-based counter, which is the only instrument fine enough to
see inside a single syscall.
Verified: `make schfs-check` passes in full, including the sweep that
crashes the volume at each of 119 points mid-transaction and requires
every one to mount with exactly its committed data, and the case where
both newest uberblocks are rubbish and the volume still comes back. The
headless boot check passes with 27 [ok] and no failures, on a SchFS root.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
1449 lines of boot/bios/, tools/sign.pl and tools/padstage2.pl, plus the
build rules, the disk image and the ISO entry that existed to carry them.
Everything since roughly 2012 boots UEFI, and CSM -- the firmware-side
BIOS emulation that lets a legacy loader run on such a machine at all --
has been going away since Intel dropped support for it in 2020. So this
is not a path being retired early; it is one whose remaining hardware is
already the exception.
The cost was never the code, it was the tax on everything near it. Stage
2 had a 65-sector ceiling it overflowed silently -- 25440 bytes against
24576 -- and because the kernel is written at sector 1 + STAGE2_SECTORS,
an overflowing loader was overwritten by the very kernel it was loading.
The resolution list could not be shared with UEFI either: VBE mode
setting is INT 10h, so matching it needed unreal mode, which is the
riskiest code in the tree for a feature that already worked elsewhere.
What replaces schos.img is the staged ESP, handed to QEMU as a virtual
FAT volume. That is a development arrangement and not an installable
disk; a real GPT image with a real FAT partition is the installer's job,
and until it exists nothing here writes a disk a machine boots unaided.
Secure Boot is untouched too -- the loader is unsigned.
The ISO keeps one El Torito entry, the FAT image holding loader and
kernel. It never booted from a USB stick via BIOS anyway: the firmware
presents the stick as a hard disk while stage2main.c read the kernel back
over ATAPI.
The 32-bit multiboot entry in entry.S now has no caller and is left in
place. Deleting kernel entry code is its own change with its own way of
failing silently, and it should not ride along with this one.
Ported with it: run.ps1, the six screenshot tools, and schcom_test.sh,
each with its own OVMF varstore copy so no run inherits another's UEFI
variables.
Two things this shook out. OVMF now belongs in `all`: nothing boots
without firmware, `make clean` wipes build/ including the copy fetched
from the host, and a clean followed by a build left every run script
throwing. And it cannot be listed as a prerequisite at the top of the
file -- make expands prerequisites when it reads the line, and
$(OVMF_CODE) is defined further down, so naming it there appends nothing
and says nothing.
Verified from a clean tree: 110 [ok] and no failures on the full suite,
the ISO boots with no hard disk attached, schfs-check passes, schcom's
end-to-end pixel test passes, and fbshot captures a real 1280x800 frame.
README's layout predated the BIOS/UEFI split. moving-to-linux.md now
says what is gitignored and therefore absent from a clone: dist/ holds
61 MB of upstream tarballs, so copy it or let the build re-fetch them --
make ports verifies each against a known SHA-256 either way.
tools/posix/setup-fedora.sh installs the toolchain and reports what it
cannot: PowerShell has no Fedora package, and bootcheck is the test
suite, so the script says how to get pwsh rather than failing quietly.
It also checks /dev/kvm, since a Ryzen box can run the tests at native
speed.
docs/moving-to-linux.md is the actual procedure: copy the repo, restore
the memory, install, build. The memory travels inside the repo and
`memory-sync.sh import` puts it under the key this machine derives from
its own path -- /home/nexoniarz/Documents/SchOS becomes
-home-nexoniarz-Documents-SchOS, where D:\DEV\SchOS was D--DEV-SchOS.
OVMF discovery no longer assumes QEMU's Windows layout. Fedora ships
edk2-ovmf to /usr/share/edk2/ovmf/, Debian and Arch differ again, so the
Makefile searches a list and names the packages when it finds nothing.
Tested through the shell rather than $(wildcard): on Windows make is a
native binary using Win32 file calls, while `command -v` returns an MSYS
path like /c/Users/..., which $(wildcard) cannot see -- it returned
nothing on a machine that had the firmware.
Two things only that machine can test: `make ports` builds musl, toybox
and mksh from source, which Windows cannot do at all; and the SchFS
round-trip needs symlinks and hard links, so it has never actually run.
boot/bios/ now holds the MBR, the El Torito stub and the real-mode stage
2; boot/uefi/ is empty and documented.
Separate directories rather than #ifdefs, because the two share almost
nothing. A BIOS loader lives in 16-bit real mode, reaches the firmware
through software interrupts, and walks itself up into long mode. A UEFI
loader is a 64-bit PE that the firmware has already placed in long mode
with paging on, calling services through a table of function pointers.
What they do share is the hand-off contract, which boot/README.md now
writes down: ELF segments placed, long mode, a 24-byte-entry memory map
at E820_MAP_ADDR, framebuffer geometry at VBE_INFO_ADDR.
That contract is the point of documenting it now. UEFI's GetMemoryMap
returns EFI_MEMORY_DESCRIPTORs, and the right move is to translate them
into the entries kernel/arch/x86_64/e820.c already parses rather than
teach the kernel a second format.
Build output paths under $(BUILD)/boot are unchanged; only sources moved.
tools/windows/ .ps1 (pwsh, so usable from Linux and macOS too)
tools/posix/ .sh
tools/python/ .py
tools/ .c and .pl
The .c and .pl files stay at the top level because they are not
host-specific: the build compiles or invokes them on every platform.
Call sites updated in the Makefile, ports/mk/port.mk, docs and the
project memory. The one thing that does not survive a move on its own is
a script deriving the repo root from its own location -- all nine
PowerShell tools used Split-Path $PSScriptRoot -Parent, and memory-sync.sh
used dirname/.., both of which quietly become tools/ one level deeper.
Two levels now.
Two pre-existing Windows failures surfaced while verifying, both real and
neither caused by the move:
- schfs_fsck.c did not compile under mingw at all: --extract uses
POSIX mkdir(path,mode), symlink() and link(), none of which mingw
has. That took the whole tool with it, and `make schfs-check` with
it. mkdir maps to _mkdir; symlink and link fail loudly rather than
writing a regular file in their place, because an extracted tree
that differs from the image while reporting success defeats the
point of --extract.
- the round-trip test then failed at `ln -s`, since Git Bash cannot
create symlinks without developer mode. It skips with a message now.
Not a fudge: mkschfs's mingw build cannot see a symlink either, so
the test would have compared a tree with none against an image with
none and called it a pass -- coverage reporting itself as present
while being absent.
Verified on Windows: build clean, all seven bootcheck suites green,
make schfs-check passes.
Prerequisites per platform, why the toolchain is clang rather than a
cross-gcc, how to force GNU, and the host differences already handled --
listed because they are the shape of the next such bug.
Records the two things a second machine needs to know: ports cannot be
built on a Windows host (sysroot/ is used as staged, so build them once
on a Unix), and pwsh runs on Linux and macOS so the bootcheck suite is
not Windows-only.
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz