docs/plan/debugger.md D3 and D4, which finish the plan apart from the
network transport.
D3 -- `whose <addr>`. The views each speak for one subsystem, which is what
keeps them cheap and current, and it is exactly why none of them can see
the bug that matters: a page on the DMA arena's free list looks fine from
dma.c, the same page on kalloc's free list looks fine from kalloc.c, and
that it is on both is a fact no single subsystem holds.
# schdbg whose 0x3e239000
phys 0x000000003e239000 kernel va 0xffff80003e239000
dma arena, handed out
pcidma slot 2, 0 KB into a 4000 KB block given to pid 4 (vgpud)
mapped pid 4 (vgpud) at 0x000000004000d000 rwu vma[5] no_free
consistent: 1 owner, 1 mapping(s)
Claimants register the way views do -- one line in the file that owns the
data -- so the kernel image, the log region, the arena, the page allocator,
the pciuser DMA blocks and every page table each answer for themselves.
`mapped` is the one no allocator can answer: there is no reverse map, so
vm_walk_user() goes forward over every mapped page of every live process.
Two verdicts are shouted and everything else is reported as fact. More than
one owner means the second allocator to hand the page out is handing out
memory the first is still using -- the H2 bug, which would have printed as
three lines. Free-but-still-mapped means a page will be given away from
under the page tables that point at it. Deliberately *not* a finding: no
owner at all, because kalloc keeps a free list and no record of what it has
handed out, so an ordinary allocated page has nobody to speak for it and
saying otherwise would be the query crying wolf.
D4 -- watchpoints, on the four debug registers that had been sitting unused
since this kernel was written. Armed against the same framebuffer page and
then killing the driver:
watch 0: 0xffff80003e239000 written, 8 byte(s), by stosq+0x1f, pid 12 vgpud
#0 memset+0xba
#1 dma_alloc+0x2e2
#2 do_dma+0x22a
#3 pciuser_ioctl+0x13b
#4 sys_ioctl+0x3c7
#5 syscall+0xf6
The chain is the answer, not the rip. It reports and continues -- a data
watchpoint is a trap, delivered after the store completes, so returning
carries on with the program none the wiser, which is what lets this be used
on a machine that is still running.
Debug registers are per-CPU and there is no general IPI here, so the table
carries a generation number and each CPU reloads from its timer interrupt
when it notices the number has moved: one comparison per tick, one tick of
latency at worst. `watch` prints which CPUs have caught up, because "this
watchpoint is watching" and "this watchpoint is watching one CPU" must not
look the same.
Also fixed while testing: watch_init() was called from mpmain(), which runs
on every processor, so the command appeared in the list once per CPU.
dbg_register() now refuses a duplicate name outright, so the next init that
runs per-CPU fails loudly in the list rather than quietly doubling it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
H2 of docs/plan/hybrid.md -- the milestone the plan itself calls the one
that proves the whole idea, and the one that cannot be skipped.
# cat /proc/schinit
1 4 11 os.schos.vgpud
# kill 4
schinitd: restarting os.schos.vgpud
vgpud: claimed
vgpud: pid 8 drew a test pattern from userspace
The test pattern ends in a twelve-block tally of the drawing process's
pid, because a second run that redraws an identical picture is
indistinguishable from a first run that never stopped. Read off the
virtio-gpu scanout across four generations it says 4, 8, 10, 12, and the
DMA arena hands back the same physical address every time.
What it took:
* A halt the kernel can apply to a device it does not understand.
Clearing PCI_CMD_BUS_MASTER is the only one there is, and it has to
happen before the DMA goes back to the arena -- a dead driver's device
keeps reading a framebuffer the kernel is about to give to somebody
else. Claim sets the bit, release clears it; pcitest shows it in a bm
column, with a third state so a failed read is never printed as off.
* A refusal. vgpu_release() asks vga_fb_restore() whether there is a
framebuffer to put the console back on, and declines to hand over the
device if there is not. The rule that the kernel keeps a minimal
driver for everything on the path to a shell is worth writing down
only if something enforces it.
* The DMA arena not being owned by two allocators at once. This is the
bug that stopped H2: freevm() frees every mapped page below PHYSTOP
and the arena is the top 16 MB of exactly that range, so a DMA block
mapped into a driver went onto the page allocator's free list when the
driver died, while pciuser_release_all() handed the same pages back to
the arena. The restarted vgpud asked for its framebuffer, got pages
kalloc() had already given out -- including its own page tables -- and
dma_alloc()'s zeroing wiped them, so it died inside the ioctl on the
return from a syscall whose stack had stopped existing. do_dma() now
records a VMA with no_free set, the way shared memory does.
* One exit status. KeepAlive must restart a driver that crashed and must
not restart one that has looked at the machine and found its device
absent: on hardware with no virtio-gpu that was fifteen spawns in
forty-five seconds, each printing a line to the console, for ever.
SCHINIT_EXIT_NORESTART is 78, sysexits.h's EX_CONFIG. It is not a new
manifest key -- the wait status has always travelled from PID 1 to the
supervisor, and note_exit() simply stopped discarding it.
The milestone's third clause, "the compositor reattaches", is not done
and is not claimed: there is no compositor running. That is recorded in
the plan as a Schcom milestone rather than counted here.
Closes the register row "A released PCI device" in docs/plan/1.0.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The failure this is against is not scope creep. It is abandonment by promotion:
a thing gets built to the point where it works, the next thing becomes more
interesting, and the first is left in a corner -- in the tree, not finished, not
deleted, and not in any list. Enough of those and the tree stops matching its
own documentation.
docs/plan/1.0.md now holds the register, and it is the only place anything
half-built is listed. Four sections, because the kinds are genuinely different:
built and connected to nothing (the text layer, a font from disk, socket
activation, wait_vblank); started and stopped part-way (foundations 2-5, hybrid
H2, Schcom v0, a released PCI device that nothing brings back); named in a "what
it does not do" and still true; and frozen -- scoped, unstarted, not to be
started. The rule is that nothing enters except by being finished or deleted,
and that adding a row requires closing one.
1.0.md already said "two things in flight, never three". It was right and it was
not being followed.
Then the corners themselves, because a register written over a tree full of them
is just a longer list:
- cmd/init is deleted. Nothing had execed /bin/init since initcode.S changed
to /bin/schinit; it was built and installed on every image as an unreachable
fallback, and an unreachable fallback rots rather than saves.
- projects/schwm/ and projects/schde/ are deleted. Both said "to be deleted"
in their own first paragraph, which proves only that a directory marked for
deletion is not deleted by being marked. README-only, no code lost, and the
arguments each made are moved into wayland.md where they are still true.
- projects/schcom/schcom and schcom-demo were tracked binaries. Untracked, and
.gitignore'd.
Three code comments and one document described a boot that has not happened
since 7d44eb7. cons_serial_only starts set, but kmain clears it on its first
lines now, so the splash does not survive the boot and the kernel log is on
screen from the start. That reversal was earned by a Chromebox with no serial
port freezing at boot showing nothing at all, and the comments still argued the
losing side of it.
The site:
- a download page. One ISO, what it has actually been run on -- one machine,
under test -- Ventoy and dd, what the first boot looks like step by step,
and the build if you would rather. The support table names one Chromebox
rather than listing hardware, because one Chromebox is the entire bare-metal
record and a list would be fiction.
- Assets/usb.svg, drawn to the same rule as the other marks: two tones,
geometry only, the accent spent in one place, and that place is the activity
light because it is the part that tells you something is happening.
- Download is in both navs and is the hero's primary action; a closing band
ends the front page on it.
- the uberblock-slots and drivers-outside-the-kernel figures are gone. Three
numbers left, including the fastfetch one, which stays because it is funny.
Two things caught by rendering the pages instead of assuming: .hero p was
beating .filemeta on specificity and the file line was coming out at body size,
and the dd command was one line long enough that the card clipped it at `conv=`
-- a destructive command that can scroll half of itself out of view is a good
way to take somebody's disk. It is two lines now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The site and several documents still described the system as it was before
virtual terminals, the new schinit, the hybrid work and descriptor passing.
docs/architecture/init.md described the wrong program. It documented a single
schinit that parses manifests and supervises jobs, which has not been true since
PID 1 was split: PID 1 forks a supervisor, spawns jobs on its behalf and reaps;
the job table lives in /proc/schinit; a heartbeat runs both ways; and
proc_reincarnate() re-execs PID 1 in place rather than panicking. Rewritten
around what exists, keeping the reasoning that is still load-bearing -- the five
failures of the sibling-init scheme, the escalation ladder, and the three bugs in
the reincarnation path that each had to happen before they were obvious.
docs/plan/init.md is deleted, which is the tree's own rule for finished work and
had not been applied. Fourteen source comments referenced it by part number, so
they are repointed at the architecture doc by section name rather than left
dangling -- a deleted document nobody notices is worse than a stale one.
docs/architecture/devices.md gained the section it has been missing since
/dev/pci existed: what a driver needs from a kernel, why mmap is checked against
the caller's claims, why DMA is a call and not a mapping, and why the write back
after an interrupt is not optional. Also that a released device does not come
back by itself, which is true and was nowhere.
docs/architecture/networking.md gained a descriptor-passing section, and
docs/architecture/README.md's stack diagram gained the two layers and the third
seam it was missing. "Two seams hold the whole thing together" has not been true
since /dev/pci.
docs/plan/README.md said the hybrid work was deliberately last, on the argument
that an interface with no consumer is wrong in ways nobody can see. The argument
was right; the conclusion was not, and the document now says why it changed --
the alternative to a driver compatibility layer is writing a driver for every
device that exists, and the original objection is answered rather than ignored
because SchOS's own drivers are the consumers.
The site: a Hybrid section with the eviction transcript, cards for virtual
terminals, schinit and drivers outside the kernel, and the numbers remeasured
rather than estimated -- 46,961 lines, 207 syscalls. The boot log in app.js is
from a boot taken today, and the lines are trimmed to what the console can show
without clipping, each still a verbatim prefix of real output.
Two small rendering fixes found by looking at the pages rather than assuming:
.console pre's min-height is now scoped to the hero, so a static transcript sizes
to its content instead of reserving eight lines it does not have; and the docs
reader's contents panel strips inline marks from headings, so a heading written
`proc_reincarnate()` no longer carries its backticks into the sidebar.
Every intra-doc link checked; none broken.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
sendmsg/recvmsg with SCM_RIGHTS. Item 1 of docs/plan/foundations.md and
mechanism 1 of docs/plan/hybrid.md, which are the same primitive seen from two
directions: Wayland's wl_shm_create_pool passes a file descriptor with no
integer-shaped alternative, and handing a driver process the device it is
allowed to touch is the same act. Both plans stopped here.
Linux's structures byte for byte -- msghdr, cmsghdr, the CMSG_ macros -- because
the programs that need this are not ours. libwayland and toybox both call
recvmsg with Linux's headers and would not notice a friendlier door.
The delivery rule is the whole design. A batch of descriptors is pinned to the
stream position of the first byte of the message that carried it, and that has
two halves: a reader arriving at that position is handed them, and a reader that
has not reached it is stopped SHORT of it. Leave out the second half and a
program asking for 4096 bytes swallows three messages and is handed one
message's descriptors, with nothing in the result saying which. socktest checks
exactly that: two one-byte messages, an eight-byte read, one byte back.
The kernel holds a reference to every descriptor in flight, so a sender may
close its own copy the moment sendmsg returns. Giving that reference back is the
part that leaks if it is not written down, and there are three ways a message
ends:
- received with room installed in the receiver's table
- received without room, or by
plain read(2) closed; MSG_CTRUNC for the first case
- never received, socket closed closed by sockclose
The middle row looks like a choice and is not: holding kernel references for a
receiver that has proved it is not looking is a leak with extra steps.
No garbage collector. A socket descriptor sent over that same socket and never
received holds a reference to the socket that holds the reference to it, and
neither close reaches zero. Linux carries several hundred lines for this.
Nothing on either plan passes a socket over a socket -- Wayland passes memory,
the driver work passes devices -- so it is a bounded leak that is documented
rather than a silent one.
Fourteen checks in cmd/socktest, and every one moves data through the descriptor
rather than inspecting it. The descriptor passed is always a pipe end, because a
pipe announces its own lifetime: a read of a pipe whose writers are all gone
returns 0, which turns "was the kernel's reference released" -- otherwise
invisible from userspace -- into a value a test can compare.
Two bugs fell out, neither in the new code:
- sockpair() never set the socket's domain, so every socketpair() socket
claimed domain 0. Invisible while the data paths asked only whether a socket
was AF_INET or AF_NETLINK, since zero answers "neither" correctly.
SCM_RIGHTS asks "is this AF_UNIX", and zero is wrong for that one.
- pipe_poll() reports POLLHUP but not POLLIN at end of file, so a non-blocking
read of a pipe whose writers had all gone returned EAGAIN forever instead of
0 -- a program that polls and reads spins waiting for an end that already
happened. sockreadable() always had the equivalent condition; the pipe path
did not. Found because the test helper for "is this descriptor closed" is a
non-blocking read of a pipe.
projects/schcom/README.md said SCM_RIGHTS was done for a long time while nothing
in the kernel implemented it, and an entire GUI plan was drawn on that line.
It is true now, which is not the same as it having been right, and the README
says so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md's first eviction. cmd/vgpud is the virtio-gpu driver as a
process: it finds the device by vendor and device id, asks the kernel for it,
and does the whole virtio 1.0 bring-up from outside -- reset, feature
negotiation, a virtqueue in DMA memory, GET_DISPLAY_INFO, RESOURCE_CREATE_2D,
ATTACH_BACKING, SET_SCANOUT, TRANSFER and FLUSH.
vgpud: virtio-gpu at 00:03.0, currently held by virtio-gpu
virtio-gpu: released to userspace; screen is the VBE framebuffer
vgpud: claimed
vgpud: display is 1280x800
vgpud: scanout is ours, framebuffer at physical 0x3eceb000
vgpud: drew a test pattern from userspace
Verified by screendumping the virtio-gpu head: the pattern is there, with a
checkerboard that would shear if the stride were wrong. The console carries on
in VBE on the other head at the same time, which is the fallback rule from the
plan working rather than being described.
No syscall knows this is a GPU. The kernel handed over a PCI device and the
process decided what it was -- which is the property that makes this a general
mechanism, and the reason the evictions come before anything foreign.
Four things the first real driver needed that the test program had not:
- PCI config space (PCIIOC_CFG). A virtio device says where its registers
are in vendor capabilities, which live in config space, so a driver that
cannot read it cannot find its own registers.
- a way for the incumbent to let go: struct pci_driver gained a release
hook. A driver without one keeps its device, which is always safe and for
anything on the path to a shell is also correct.
- the outgoing driver freeing its DMA. Releasing the device but keeping its
4 MB framebuffer is half a handover -- the incoming driver asks for one and
is told there is no room.
- a 16 MB DMA arena. 4 MB was exactly one framebuffer at this resolution,
and either side of a handover there are two.
And one bug it reproduced on its first working run: vgpud polls the used ring,
so it registered no interrupt handler, and a virtio device interrupts on every
completion. The storm detector said so immediately --
irq 11: 77780 interrupts/second -- a device on this line is not
acknowledging it. handler 'e1000' is attached
-- naming the line, the rate and the neighbour it was drowning. One line fixes
it (VRING_AVAIL_F_NO_INTERRUPT before the queue is enabled), and that detector
was worth every minute it cost.
include/virtio.h moved out of the driver directory. Its own comment said it
should when a second reader appeared; one has.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md mechanism 3. A process asks for a device's interrupts with
PCIIOC_IRQ and then reads them, which is how Linux's uio does it and for the
same reason: a descriptor composes with poll, and a driver that stops reading
falls behind rather than losing events. read() returns a count rather than a
flag, so a driver that was busy sees it missed three and acts once.
Proven against an e1000e by asserting a cause through its ICS register and
reading the interrupt back out in userspace:
interrupts routed here (line 10)
interrupt delivered, count = 1
ICR = 0x80000004
0x80000004 is the cause the test set plus INT_ASSERTED -- the device's own
register, read by userspace as its acknowledgement.
**The masking is the design, not a detail.** A PCI line is level-triggered and
stays asserted until the cause is cleared at the device, which is a different
register on every chip and so is something only the driver can do. The kernel
masks the line on arrival and userspace's write() unmasks it. Signalling EOI on
a still-asserted line re-enters the handler immediately and for ever; this
kernel did exactly that by accident at 72,000 interrupts a second, and what it
looked like from outside was a clock running seven times slow (§13).
Which decides what happens when a driver dies mid-interrupt: the line is left
**masked**. The instinct is to unmask -- do not leave the device dead -- and it
is wrong, because unmasking an asserted line with no handler is a crashed
driver taking the machine down with it. Masked is safe and not permanent: the
next PCIIOC_IRQ arms it. Both halves verified by crashing a driver on purpose
and then starting another one.
A line already carrying kernel handlers is refused outright. Masking is
per-line, so handing out a shared one would silence whichever kernel driver is
also there, with nothing logged. MSI is the real answer and pci_msi_enable() is
already in the tree waiting for a caller.
Also fixed, found by running the crash twice: DMA buffers were never returned
when a process exited. The arena is 4 MB and contiguous, so a driver that
restarts a few times exhausted it -- "out of DMA memory, 3584 free" -- which is
a poor property for an interface whose whole promise is that a driver can crash
and come back.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/hybrid.md mechanisms 2 and 4: MMIO and DMA to a process.
A process can enumerate the bus, claim a device exclusively, map its BARs and
get memory the device can be pointed at. Proven end to end against an e1000e
-- the exact device class we cannot drive and would want a foreign driver for:
device 7: 8086:10d3 (network)
claimed
BAR0 at 0x81060000, 128 KB
regs[0..3] = 0x00140261 0x00000000 0x00080283 0x00000000
MMIO reaches the device
DMA 8 KB at virtual 0x40001000, physical 0x3f8eb000
Those are the e1000e's CTRL and STATUS with full-duplex and link-up set, which
is how you tell a real mapping from one reading 0xFFFFFFFF off an unmapped
address. Claiming a device the kernel drives is refused -- two writers of one
register set looks like hardware that has started lying -- and everything a
process held is released when it exits, because a driver that crashed must not
keep its hardware away from its replacement.
mmap's offset is the BAR's physical address, checked against the BARs of
devices *this process has claimed*. Without that check the device is /dev/mem
with extra steps and a process could map the kernel's own memory. Mappings are
write-through: a cached write to a doorbell arrives whenever the cache feels
like it, which from a driver's side is indistinguishable from hardware that
ignores you.
The interface is about PCI devices, not about any driver model, and its first
users will be SchOS's own drivers when virtio-gpu is evicted. That ordering is
the design rather than an accident: an interface whose first consumers are
native drivers is a general mechanism something foreign can use later, instead
of a hole shaped like something foreign.
Also: PROT_* and MAP_* moved to include/posix.h. They were defined only in
sys_mem.c, so cmd/fbinfo carried a private copy and this wanted a third --
two copies of a number the kernel compares against, where a mismatch shows up
as a mapping with the wrong permissions rather than an error.
No IOMMU, so this isolates a driver against its own bugs and not against its
own DMA. The plan says so at length and it is still true.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
QEMU carries a gdb stub and exposing it costs two flags. `make qemu-gdb` holds
the machine before its first instruction and waits on port 26000; attach and
you get breakpoints, single-stepping and symbols in kernel code -- including
the early boot the crash screen cannot reach and the serial console has not
started for.
.gdbinit does the connecting, and documents the one confusing part rather than
leaving it to be rediscovered: at the reset vector a breakpoint on a kernel
symbol fails with "Cannot access memory at 0xffff8000...", because the kernel
links into the high half and nothing is mapped there until it enables paging.
Symbols resolve fine -- gdb knows kmain is main.c:32 -- the address just is not
addressable yet. Continue, let it boot, interrupt, and everything works.
This is for QEMU. On hardware with no serial port the tools are the on-screen
kernel log and PSOGM's QR code, which is what that QR code has always been for.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Everything the kernel printed went to the serial port and nowhere else until
the first program started and called console_takeover(). On a machine with a
UART that is fine. On one without -- a laptop, a Chromebox, anything built
this century -- the screen showed the loader's progress bar and then nothing
at all, for the whole of boot, on exactly the machines where something was
going wrong.
A report of "it shows Loading SchOS and freezes" cannot be acted on. The same
boot with a log on it says which line it stopped after, and that is usually
the whole diagnosis.
The loader has already put a framebuffer on the screen and described it in the
boot block, so there was a perfectly good console sitting unused for the
entire early boot. kmain attaches it on its first line now.
Not gated on the F8 verbose menu, which was the first instinct and is wrong:
F8 is no use to someone whose machine resets before they can read anything.
This is what Linux does too -- the log is the default and `quiet splash` is
the thing you ask for. The splash survives until the kernel's first message,
and a boot that succeeds clears the lot when the shell starts, so the only
people who ever see this are the people who need to.
vt_init is idempotent now, because the early attach brings the terminals up
before main() reaches its usual call and the second one must not wipe six
screens of boot messages.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
ports/toybox already installed its applets as hard links to one multicall
binary, with a cp fallback. The links had never happened: the install is
stamped, the stamp predated the ln, and 236 separate 784 KB copies had been
sitting in sysroot/bin ever since. Forcing the install: 194 MB -> 13 MB.
Which immediately broke everything, in a way worth writing down.
**/bin/ping exists twice.** toybox has a ping applet and cmd/ping is a
first-party program that talks to lwIP directly. The install rule for cmd/
programs was `cp`, and cp onto an existing hard link writes *through* it -- so
copying cmd/ping over the applet of the same name replaced the contents of the
shared inode and all 236 links became ping. `cat /proc/uptime` answered
"ping: not a dotted-quad address".
Invisible until the links existed: while the applets were separate copies,
overwriting one affected exactly one. Fixed from both directions, because it
can be hit either way -- the cmd/ rule removes the target before copying, and
toybox skips names SchOS provides itself.
**The USB test image stopped fitting.** mkfs writes each hard link as its own
copy, so /bin expanded to over 60 MB on the way in. That image exists to prove
the USB driver can read one block, and bootcheck asserts on its 16 MB size, so
it excludes /bin rather than growing.
The ISO is the point of all this: 196 MB before, 62 MB now, and it boots to a
shell with RAMROOT=1.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The bound was 20,000,000 iterations, on the reasoning that a real drive
answers in microseconds so only an empty channel could reach the end. True,
and it misses what an iteration costs: every read here is a port access, and
under a hypervisor a port access is a VM exit at a microsecond or two.
Twenty million of those is a minute of the machine apparently doing nothing,
on every boot, on any machine with nothing on the primary IDE channel -- which
is every machine built in the last decade, where storage is AHCI or NVMe and
the legacy ports answer nobody. Booting the ISO looked like a hang for exactly
that reason: the line after "time:" took longer than anyone waits.
Bounded by time now, one second: four orders of magnitude more than a drive
needs, and short enough that an absent one costs nothing. "ide: no drive on
the primary channel" prints immediately.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/init.md milestones I2 and I3. The rule change.
**I2 -- the heartbeat.** The failure the two-init scheme could not see is that
an init usually does not die, it *hangs*: wait() never returns for a process
that is merely stuck, so a supervisor watching a wedged init reports
everything normal for ever. PID 1 now pings every two seconds and expects an
answer within ten; silence means stuck, and stuck is worth acting on.
Exercised rather than reasoned about, as the plan asks: `sysrq w` wedges
schinitd by making the scheduler pass over it for ever. It stays alive, keeps
its descriptors and appears in every listing -- which is the point.
Two things that only showed up by running it:
- kill() sets a flag the target checks when it next runs, and the premise
here is that it is not running. Waiting for a corpse that may never be
produced turns the recovery path into a second hang. PID 1 replaces the
supervisor *without waiting*; the old one's socket is closed, so the moment
it runs again its first write fails and it exits.
- the replaced supervisor must notice the hangup. poll() reports POLLHUP and
never POLLIN again, so a loop that only looks for POLLIN sits there
complaining that PID 1 has stopped pinging it.
**I3 -- proc_reincarnate().** exit() on initproc panicked. Now the kernel
tears down nothing, keeps pid 1, and re-execs /bin/schinit in place with a
generation counter. The pid stays 1, so every orphan the kernel reparented is
still correctly parented; the children survive; the open files survive, which
is why this is the first line of exit() and not the last; and the job table
survives in /proc/schinit, which is what it is there for.
The escalation ladder: generations 2-3 carry on, generation 4 ignores
/etc/schinit and starts a console shell only -- a manifest that kills init
must not kill it for ever -- and generation 5 stops, with PSOGM rendering
INIT_RESURRECTION_FAILED, a call chain and a QR code.
Three bugs found by running it, each a lesson about exec():
- exec() returns 0 on success; it does not fail to return. The new image
starts when the kernel returns to userspace through the rewritten
trapframe. Returning from exit() is the success path.
- exit() was reached because `killed` was set, and the trap path checks it
again on the way out. Leaving it set exits the new image before its first
instruction: five generations in a few microseconds, a resurrection loop
that looks exactly like the crash it was meant to survive.
- exec() keeps open files, which is what gives the new image a console --
and also keeps the previous life's socket, holding the old supervisor's
channel up so it never sees a hangup.
Verified: `sysrq i`, and the shell being typed into keeps its pid across the
death and rebirth of PID 1, with /proc/schinit byte-identical either side.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/init.md milestones I0 and I1.
**The split.** schinit is PID 1 and does four things: bootstrap the
filesystems, fork schinitd, fork jobs on schinitd's behalf, reap children. No
manifest parsing, no filesystem walking after boot, no allocation. It is the
one program on the machine with no supervisor, so it is written to be too
boring to fail.
schinitd is PID 2 and holds everything else -- /etc/schinit, respawn policy,
throttling -- and is restartable, which is where the bugs are allowed to be.
**Jobs are forked by PID 1, not by schinitd.** That is the load-bearing
detail. schinitd decides and asks; PID 1 acts. So every job is a child of PID
1 at all times, and a supervisor that dies orphans nothing, reparents nothing
and restarts nothing.
**/proc/schinit** is the job table, written by PID 1 whenever it changes. The
kernel holds the text and does not interpret it: a procfs generator runs in
the kernel, and walking PID 1's memory to answer a read would put a userspace
program's format into the kernel, where it would rot.
Verified the way the plan asks for -- `kill 3`, then look:
schinitd: adopting os.schos.console-shell
schinitd: adopting os.schos.tty2-shell
/proc/schinit byte-identical across the restart, same pids, same cookies, same
start times, and the shell being typed into never noticed.
The first attempt got I1 wrong in the instructive way: PID 1 published the
table and schinitd never read it back, so the restarted supervisor started
everything a second time -- two console shells on one terminal, which is the
split-brain this plan rejects the two-init scheme for, reached by a different
road. Publishing state is half of it; coming back and believing it is the
other half.
The protocol is include/schinit.h: fixed-size messages, versioned in the
hello, entirely internal. Fixed-size so PID 1 never allocates, and a
supervisor that has gone mad cannot make it run a parser.
Still to come: I2 (heartbeat both ways, so a hang is as detectable as a death)
and I3 (proc_reincarnate, the actual law change).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
licence-check is .PHONY, and I had put it on the left of the colon as a
prerequisite of the install rule. A phony prerequisite is always out of date,
so `make` reinstalled the whole of zsh every single time -- slow, and
eventually fatal: zsh's installfns.sh trips over the installfnsdir its own
previous run left behind, so the build failed outright with
install: cannot stat 'installfnsdir/_vcs_info_hooks'
It runs inside the rule now, which is what it always should have done, and the
stale directory is removed first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The console got slower the day TIOCGWINSZ started telling the truth.
`ESC[J` -- erase to end of screen -- arrives after every shell prompt, and zsh
redraws the prompt on every keystroke. While the terminal claimed to be 80x24
that erased 1920 cells; once it reported the real 160x50 it erased 8000, and
every one was written to the framebuffer whether or not it already looked
exactly like that.
Measured first, which killed the obvious theory: hoisting the bounds checks
out of gfx_draw_pixel changed a full-screen clear by 1%. The cost is not the
per-pixel function call, it is the framebuffer -- about 128 MB/s here, so four
megabytes is 32 ms of writing, and on a real window with QEMU rendering each
frame it is worse than that.
So write less rather than write faster. The grid already knows what is on
screen: erase_run compares before it draws and skips any row span already
blank in exactly those colours, and vt_clear does the same for the whole
screen.
100x erase-to-end-of-screen, before 0.101s
100x erase-to-end-of-screen, after 0.017s
Six times, with -display none where the framebuffer is ordinary RAM. This is
what the backing store is for: comparing is free, writing is not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A timer interrupt that arrives while interrupts are disabled is not delayed,
it is lost -- the LAPIC in periodic mode holds one pending interrupt and drops
the rest. So anything the kernel does with interrupts off for longer than
10 ms makes `ticks` run slow, and it never catches up.
That has now presented twice as "uptime is wrong": once as an interrupt storm
taking 83% of the CPU, once as heavy console output on a display that is
expensive to draw to. Both times the tick was the messenger, and both times it
looked like a timekeeping bug.
monotonic() reads the TSC instead. It is a counter in the silicon that
advances whether or not this kernel is paying attention, it is already
measured against the PIT at boot, and reading it is one instruction and no
lock. wallclock(), /proc/uptime, sysinfo, getrusage and times() all go through
it now.
`ticks` keeps the job it is good at -- the scheduler preempts on it, sleep()
counts it -- where losing one means a slightly longer sleep rather than a
wrong answer about what time it is.
Lost ticks are no longer harmful, which makes them invisible, which is worse.
So /proc/interrupts now says
timer: 3383 ticks taken, 3387 expected
and names the gap when it grows, because a machine dropping timer interrupts
is spending too long with interrupts disabled, and that is worth knowing
before it turns into a clock that lies.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The sweet spot was available the whole time and I ruled it out by writing
"AltGr+anything" when the true statement is "AltGr+*letter*".
A Polish layout wants AltGr with a letter -- ą ć ę ł ń ó ś ź ż. AltGr with a
function key produces nothing on any layout, no window manager binds it, and
no application asks for it. It is the one combination the host, applications
and the keyboard layout all leave alone, and the previous three commits talked
themselves out of it on a technicality that was mine, not the hardware's.
Verified rather than argued, with QEMU sendkey and screendump hashes:
AltGr+F2 -> tty2
AltGr+F1 -> back, pixel-identical to the start
AltGr+a -> reaches zsh, so ą still types
That distinction is only expressible because Right Alt became its own modifier
bit two commits ago. Sharing ALT is harmless for typing -- neither is used to
look up a character -- and made this impossible to say.
Also added, since it was asked for in the same breath: minus and equals step
to the previous and next terminal, on whatever the chord's modifiers are. They
skip terminals that are not in use -- the same `opened` count VT_GETSTATE
reports -- because six terminals with two shells on them means four blank
screens in between, and cycling past those is worse than not having the key.
AltGr+= -> tty2, again -> wraps to tty1 (only two in use)
AltGr+- -> tty2
chvt -c still moves all of it, and `chvt` reports both halves.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Third guess at a chord, and the third one would have been wrong too: a display
manager that grabs Ctrl+Alt+F<n> matches loosely, so Ctrl+Alt+Shift+F2 never
reaches the guest either. Extra modifiers do not get past a loose grab.
The real problem is that this is not knowable from inside. A key the host
swallowed is indistinguishable from a key nobody pressed, so the guest cannot
probe for a free combination, and there is no combination that is free
everywhere:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6 (loosely matched),
Ctrl+Alt+digit (QEMU's own console tabs)
APPLICATIONS want Alt+anything (Meta -- zsh binds Meta-digit as
digit-argument), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter
So it is a setting. VT_SETCHORD/VT_GETCHORD, and in userspace:
chvt -c ctrl+shift+F Ctrl+Shift+F1..F6 (the new default)
chvt -c ctrl+alt+shift+F
chvt -c alt+1
chvt -c off no chord; chvt N is then the only way
chvt report the active terminal and the chord
`off` is a legitimate setting rather than a failure mode. On a machine whose
host grabs everything worth binding, `chvt N` is the honest answer.
The default moved to Ctrl+Shift+F1..F6: display managers bind Ctrl+Alt+F<n>,
not Ctrl+Shift+F<n>, and Ctrl+Shift with a *function* key is not a character
on any layout -- unlike Ctrl+Shift+digit, which is.
Caught while writing it: VTC_RALT was 0x08 while kbd.h's RALT is (1<<7), since
(1<<3) is CAPSLOCK. A chord set from userspace with AltGr would simply never
have matched, and the only symptom would have been a key that does nothing.
A _Static_assert now holds the two headers together.
Verified: Ctrl+Alt+F2 leaves the screen byte-identical, Ctrl+Shift+F2 switches,
Ctrl+Shift+F1 returns to a pixel-identical tty1, and chvt -c round-trips
through alt+1 and off and back. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+1..6 was a worse choice than the Alt+F-keys it replaced, and the reason
is the one that matters: anything the kernel swallows is taken from every
program that will ever run here, permanently.
Alt+<digit> is Meta-digit. zsh's own line editor binds it as digit-argument --
Alt+1 Alt+2 x repeats x twelve times -- and every readline editor does the
same. Yesterday's chord broke that system-wide, which is exactly the failure
mode of picking a chord applications want.
Working the whole space instead of one axis of it:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6
APPLICATIONS want Alt+anything (Meta), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter -- Polish diacritics
Ctrl+Alt+Shift+F1..F6 is in none of those sets. Display managers bind the same
chord without Shift, so adding it steps out of the host's way, and no terminal
application binds a triple-modified function key.
Which chords actually reach a guest was measured rather than assumed: a
temporary probe in kbdgetc logged every modified keypress and QEMU's sendkey
fired each candidate at it. Everything reached the guest, Ctrl+Alt+F2
included -- so that conflict is the host's display manager, not QEMU. The same
probe corrected an earlier claim: `sendkey altgr-2` produces no event at all,
so the previous commit's "AltGr+2 did not fire" was never actually tested.
And the escape hatch is real now. VT_SETMODE was accepted and ignored, so a
program could ask to own the chord, be told yes, and still not get it.
VT_PROCESS genuinely stops the kernel switching. Together with the EVIOCGRAB
path -- which kbdgetc already checks before the chord is recognised -- there
are three honest layers: nothing, VT_PROCESS, exclusive grab.
What VT_PROCESS still does not do is the VT_RELDISP handshake; struct vt_mode
carries relsig/acqsig for when Schcom needs to release the GPU before the
screen changes hands.
Verified by screendump hash: Alt+2 reaches zsh as Meta, Ctrl+Alt+F2 and
Ctrl+Shift+F2 leave the screen untouched, Ctrl+Alt+Shift+F2 switches.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+F1..F6 was wrong in three separate ways, and the third is the one that
matters most here.
Alt+F4 the host window manager closes the QEMU window
Alt+F2 GNOME and KDE open a run dialog
Ctrl+Alt+F1..F6 the host switches its *own* virtual terminals
AltGr+anything Polish diacritics -- a c e l n o s x z with their marks --
and on some setups AltGr is delivered as Ctrl+Alt
Ctrl+Shift+key widely bound inside applications
Scroll Lock not present on many keyboards
Alt+1..6 survives all of it: the number row, so no function key is involved,
and left Alt, so AltGr is untouched.
Right Alt is tracked as its own modifier bit now. It used to share ALT, which
is harmless for typing -- neither is used to look up a character -- and wrong
for chords, because it made AltGr indistinguishable from Alt.
And the test is an equality rather than a mask:
if ((shift & (CTL | SHIFT | ALT | RALT)) == ALT && ...)
`shift & ALT` fired on Ctrl+Alt+1 and AltGr+1 as well, so a chord aimed at the
host -- or an ordinary Polish keystroke -- would have switched terminals
behind your back. That was a real bug in what shipped yesterday.
Verified with QEMU's sendkey, comparing screendump hashes:
start (tty1) 86cee2284878
Ctrl+Alt+2 86cee2284878 identical -- did not fire
AltGr+2 86cee2284878 identical -- did not fire
Alt+2 114562804a78 switched
Alt+1 86cee2284878 back, pixel-identical to the start
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Three symptoms, two causes, both in the terminal layer.
**The grid and TIOCGWINSZ disagreed about the size.** vt_init() sizes every
grid from gfx_cols()/gfx_rows(), and it runs at main.c:75 -- while the display
driver attaches its scanout from the PCI bus walk at main.c:99. So the grids
were the 80x24 fallback, and TIOCGWINSZ, which computed its own answer live,
said 160x50.
That one disagreement produced all three things visible in the report: text
stopped two thirds of the way down the screen, `ls` laid out 160 columns into
an 80-column grid so words split across the wrap ("vers" / "ion"), and zsh's
cursor tracking was wrong on every line.
Fixed in two places, because either alone would leave the trap set:
gfx_attach_scanout() now calls vt_resize(), so the grids learn the real screen
the moment there is one; and TIOCGWINSZ reports v->cols/v->rows rather than
measuring again. One number, from the terminal being asked.
**Wrapping was eager.** A glyph printed in the last column moved the cursor to
the next line immediately. Real terminals set a pending-wrap flag and wrap when
the *next* glyph arrives -- which is why a line exactly as wide as the screen
takes one row and not two, and why a program can write the bottom-right cell
without scrolling.
zsh's partial-line marker depends on that rule directly: it writes exactly
COLUMNS-1 spaces and expects to still be on the line. With eager wrap it left a
reverse-video '#' above every prompt, which is the hashtag in the report. Both
are gone.
Verified by screendump: `ls /proc` now fits one line with "version" intact, no
markers, and output fills the screen to the last row. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Porting zsh found four defects in the kernel and one in the filesystem. None
of them were about zsh; all of them had been there the whole time.
**exec threw the environment away.** kernel/fs/exec.c wrote a single zero for
envp with the comment "(no environment)" -- not yet, but ever, for every
process. musl has been passing a perfectly good envp to execve (Linux 59, which
SchOS answers) and it was never read. So $TERM was unset, $PATH was whatever
each program invented, and a variable exported in a shell did not survive the
exec meant to carry it. exec() takes an envp, sys_exec reads argument three,
and schinit manifests grew an Environment key. The userland two-argument
exec(path, argv) stays as a wrapper that passes null explicitly -- the raw stub
is execve now, so a short caller cannot leave %rdx holding a stray pointer.
**Which overflowed the kernel stack.** Three pointer arrays, ~1.8 KB, on a
4096-byte stack, under exec -> loaduvm -> readi -> SchFS -> btree. Pid 1 went
down on the first exec. The canary caught it and named the process, which is
what it is for. They live in one kalloc'd page now.
**waitpid returned a bare -1** for both "no children" and "interrupted". musl
reads [-4095,-1] as -errno, so userspace saw EPERM; zsh printed "wait failed:
operation not permitted" and abandoned the rest of /etc/zsh/zshrc. -ECHILD and
-EINTR now. Third time a bare -1 has cost real time -- on a system with no
permission model, EPERM should be read as "a syscall returned -1".
**NVMA was 64.** musl's allocator takes a mapping per size class and does not
release them eagerly, so compinit ran out of slots and got -1, which is EPERM,
which malloc turns into NULL, which zsh reports as "fatal error: out of memory"
-- on a machine with 1000 MB free. 256 slots, and -ENOMEM.
**And a small write to SchFS costs 58 ms.** 200 writes to one open file take
11.75 s; the same to /dev/null take 0.14 s. That is the design stated at the
top of kmount.c -- one transaction group per operation, and a commit is two
flushes and an uberblock -- not a bug. But compdump writes its digest with
thousands of separate prints, so it takes minutes and looks like a hang.
compinit -D, which skips the dump, finishes in 3.6 s. This one is a decision
rather than a fix, so it is written up and left: /etc/zsh/zshrc keeps compinit
switched off and explains exactly why, with the measurements.
zsh runs as /bin/zsh and is the console shell. ZLE works -- arrow keys recall
history through terminfo, $COLUMNS reads the real 160 because TIOCGWINSZ was
fixed, colour and prompt expansion work, startup is 0.14 s. mksh keeps /bin/sh,
so schinit's no-jobs fallback is a different program from the one that could
have failed.
Also fixed while here: AT_CLKTCK was the literal 100 and is USER_HZ; the
extract rule in four ports could move a source tree inside itself when make
re-ran it, which is how zsh's configure came to write modfile=zsh-5.9/... into
config.modules and fail three steps later.
schfs-check passes. Full writeup in docs/history/kernel.md section 14.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The point is not a disclaimer, it is the argument: the tool is not the measure
of a project. Code nobody understands is bad code whoever typed it, and code
whose every decision can be explained is good code by the same standard.
Placed next to a link to history/ on purpose. That directory is where the
claim can be checked -- the bugs are written up in full, including the wrong
hypotheses and the measurements that killed them. An explanation you can
follow is the evidence; a byline is not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Two additions to docs/Website.
**The reader.** docs.html renders the 29 documents in docs/ in the site's own
theme -- index down the left, table of contents down the right, and links
between documents rewritten so ../history/schfs.md navigates inside the
reader instead of downloading a file.
The parser is ~150 lines in docs.js, not a dependency: it handles exactly
what docs/ uses, and a Markdown library would outweigh every other asset here
combined. Everything is escaped before a tag is emitted, so the only HTML
that reaches the page is HTML docs.js wrote. Verified by rendering all 30
documents (302 KB of Markdown) with zero failures, no unrestored sentinels
and no runaway loops.
One caveat, stated in the page itself rather than hidden: browsers block
fetch() on file:// URLs, so this page needs a server. It says so, with the
command, and offers the raw file as a fallback. The rest of the site is
unaffected.
**The flag.** A Progress Pride flag in the top bar and a line in the footer,
on both pages, permanently. Support with an end date is marketing. It is
deliberately small and deliberately not a page of its own -- this is an
operating system, and the flag is a statement, not a subject.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
index.html, style.css, app.js and the three marks. No build step, no
dependencies, no framework -- it opens from a file:// URL.
The palette is not a design decision: it is include/theme.h transcribed,
including the rule that header enforces. PSOGM purple appears exactly once,
on the crash-screen section, because branding/README.md says a colour used
everywhere means nothing. The typefaces are Roboto and JetBrains Mono, both
already in ports/ and both requested from the system rather than downloaded --
a font file would outweigh the rest of the site.
The boot log in the hero is real lines from a real boot. The script is
decoration and the page is complete without it; it does nothing at all under
prefers-reduced-motion.
The feature tags (runs / in progress / designed) are a promise, and the
README says so: anything marked `runs` is in the tree and works today.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
zsh's configure will happily build without a terminal library -- the probe is
AC_SEARCH_LIBS, which is soft -- and produce a shell whose cursor cannot move
and whose arrow keys do nothing. ZLE is the reason to want zsh, so this comes
first.
MIT, so it combines with Apache-2.0 without conditions.
Built static, widec (which is what zsh looks for first, and the console's
UTF-8 decoder can already take), and --disable-database --with-fallbacks so
seven terminal descriptions are compiled into the library. SchOS has no
business shipping /usr/share/terminfo, and with the fallbacks the .a is
self-contained: verified that no terminfo path strings survive in the binary.
Nothing reaches sysroot/ -- a static library is not a file the OS ships -- so
`install` means into $(PREFIX). port.mk gains NCURSES beside MUSL for the
same reason MUSL is there.
tinfotest.c is the acceptance test, and asks the question the build cannot:
not "did it link" but "does terminfo work on a SchOS console". It reports
TIOCGWINSZ, initialises from the compiled-in fallback, and names every
capability ZLE binds. Anything MISSING there is a missing feature in the
shell later.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported 3 seconds of uptime after 15 real ones, `time` claimed
3.12s for a 20-second command, and ping's one-second interval was closer to
six. One cause, not three: `ticks` was advancing at ~14.5 Hz instead of 100.
It was not the timer. virtio-gpu-pci shares IRQ 11 with the e1000 and
registered no interrupt handler at all. PCI INTx is level-triggered, so the
device held the line asserted, the kernel signalled EOI, and it fired again
immediately -- 72,000 interrupts a second, 83% of CPU0, starving the tick.
The e1000's handler read ICR as zero half a million times, correctly
answering "not mine", which is what made it look like a network-free problem.
Reading virtio's ISR byte clears it and drops the line. That is the fix.
irq_dispatch now measures each line's rate against the TSC -- not ticks,
which is the first casualty of a storm -- and names the attached handlers
once above 20000/s. It reproduces the original fault as a single line.
Found along the way, and fixed because they were real:
- lapicinit loaded TICR with xv6's uncalibrated 10000000, whose own comment
admitted it was never measured. calibrate_timers() now measures the LAPIC
and the TSC against the 8254 PIT. (It came back at 999.9 MHz, so this was
not the bug -- but the next machine is not obliged to be 1 GHz.)
- microdelay() was an empty function body. Every microdelay(1000) in the
xHCI reset path and the USB hub power-on sequence returned instantly.
- HZ is a constant in param.h now, not the literal 100 written out at a
dozen ticks-to-seconds conversions. USER_HZ is separate and deliberately
does not follow it: musl answers sysconf(_SC_CLK_TCK) with 100 always, so
times() and /proc/stat scale at the syscall boundary the way Linux does.
- TIOCGWINSZ answered a hardcoded 24x80. gfx_cols()/gfx_rows() have known
the real geometry all along; at 1024x768 the console is 128x48, so every
program that lays out a screen was formatting for the wrong one.
- TCFLSH fell through to the catch-all `return 0`, claiming to discard
input without discarding any.
uptime now advances 5.01 seconds per 5 real seconds. schfs-check passes.
Full investigation, including the two wrong hypotheses and the measurement
flaw that protected them, in docs/history/kernel.md section 13.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A fresh boot spent 2600 ms in schinit's bootstrap() before printing its first
line, and the whole of it was device nodes. Measured rather than guessed: an
instrumented bootstrap reported 2600 ms on a fresh image and 0 ms on the next
boot, because the nodes already existed by then and mknod failed fast. The cost
was therefore invisible to anyone not building images -- which is to say,
invisible to everyone except whoever works on this.
Each node was a real inode on the root filesystem, and SchFS commits every
mutation as its own transaction group: a copy-on-write rewrite of the path to
the root, then an uberblock behind a cache flush. Twenty of those is seconds.
The duplication mattered more than the time. Major and minor numbers are the
kernel's -- devsw[] in kernel/dev/cdev.c is what they dispatch on -- and schinit
held a second copy of that mapping with nothing checking the two agreed. Adding
a character device meant editing a userspace program, and a wrong minor produced
a node that opened successfully and did nothing.
kernel/fs/devfs.c puts the table next to the thing it describes and serves /dev
behind the same fs_ops vtable procfs uses. The namespace is all it provides:
fileread and filewrite see T_DEV and go through devsw themselves, so a read
never reaches it. It is read-only, and dirlink and ialloc answer EROFS rather
than pretending -- a node exists because the kernel has the device, or it does
not exist.
This also makes /proc/filesystems true. It has advertised "nodev devtmpfs" for
as long as it has existed, against a kernel that had no such filesystem.
Two things found while measuring what remained:
* The thirteen mknod() calls for /proc ran *after* the procfs mount, so every
one was resolving a path into a read-only synthetic filesystem and failing.
procfs.c's own note called them a fallback to be cleaned up later; they have
been dead for longer than that.
* The four mkdir() calls for mount points were the rest of it. They are made
by the image builder now (sysroot-install), and the ones in init are a
fallback -- a mkdir that fails because the directory exists costs a path
walk and no writes, where creating one costs a transaction.
bootstrap() is now 0 ms on a fresh image, down from 2600.
init opens /dev/console after the mount rather than mknod'ing a node called
"console" into the root directory, which is what used to leave a stray /console
in `ls /`. The old path is kept as a fallback: if the mount fails there is no
/dev/console and no way to report it.
socktest passes, /proc still lists per-process directories, ps -e still
enumerates.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
"net: eth0 10.0.2.15/255.255.255.0 via 10.0.2.2" arrived on the display seconds
after the prompt did, so the first thing anyone saw after booting was the kernel
typing into their session. It lands wherever the cursor happens to be -- in the
middle of a command, a fastfetch, or later a compositor's output.
console_takeover() hands the framebuffer to userspace on the first exec, and
after that the screen belongs to whoever is using the machine. cons_serial_only
already encodes that rule for the boot path -- "the display is the product; the
serial line is the diagnostics" -- and it starts set for exactly this reason.
What was missing is the rule for messages that cannot be timed to happen before
userspace starts, because they are waiting on a network.
klog() is that: the serial port only, whatever cons_serial_only currently says.
A macro rather than a function, because cprintf's varargs cannot be forwarded --
there is no vcprintf, and adding one to duplicate the formatter would cost more
than it buys. cprintf holds cons.lock for the whole message, so the flag cannot
be observed half-changed by another CPU printing at the same time.
Nothing is lost. The line still goes out the UART, which is where bootcheck
reads it from and where you want it when something is wrong, and a person who
wants to know their address reads /proc/netif.
Verified by screendumping the framebuffer after a boot and two fastfetch runs:
no interruption on screen, still one occurrence on serial.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Two ANSI bugs, both found by running fastfetch rather than by reading the
parser, and both invisible to anything that spells its escapes out in full.
ESC[m with no parameters means ESC[0m. ECMA-48 is explicit that an omitted
parameter takes its default and SGR's default is 0, and sgr() iterated its
parameter list -- which is empty in exactly that case, so the loop body never
ran and the reset was silently dropped.
Programs emit the bare form constantly. fastfetch writes "\x1b[32m1%\x1b[m", so
everything after the first coloured character stayed green forever. With a
background colour it is much worse: its palette swatch sets a white background
and resets, the reset did nothing, and the console went white-on-white and
stayed there -- filling the screen with white rectangles as it scrolled, which
looks like a corrupted framebuffer rather than one missing branch.
OSC sequences were not a state at all, so ESC ] fell through and the payload
printed as text: a hyperlinked path arrived as "Disk (]8;;file:///\]8;;\)".
Nothing here acts on an operating-system command -- there is no window title and
no hyperlink to follow -- but *discarding* one is not optional, because the
alternative is printing somebody's URL into the middle of their output. ESC \
ends it, and an ESC followed by anything else is handed back to the escape state
rather than eaten, so a malformed OSC does not swallow the sequence after it.
Verified by screendumping the framebuffer after two consecutive fastfetch runs:
identical output both times, near-white coverage down from most of the screen to
2% (the palette swatch's own white cell), and the disk line reading "Disk (/)".
Also installs docs/branding/Ascii/ascii_50.txt as /usr/share/schos/logo.txt --
Shift as characters, at the width that leaves room for an info block on an
80-column console. Installed from the branding directory rather than copied into
sysroot by hand, so there is one source.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported "getifaddrs(&ifAddrStruct) failed", and the right answer to
that is not a patch to fastfetch. Asking what interfaces a machine has is
something every networked program does, and on Linux there is exactly one way:
a NETLINK_ROUTE socket. musl implements getifaddrs() over it, so a libc call
that looks like a syscall is really a small protocol conversation -- and without
this side of it every caller fails the same way.
kernel/net/netlink.c is a responder rather than a general socket family. No
event stream, no multicast groups, nothing subscribes to link state: a request
arrives, the whole answer is generated into the socket's buffer, and reads drain
it. That shape is chosen, not a shortcut -- getifaddrs sends a dump and reads
until NLMSG_DONE with MSG_DONTWAIT, so generating at send time means a read
never blocks and the non-blocking flag is honoured for free.
RTM_GETLINK returns one RTM_NEWLINK per interface with IFLA_IFNAME and
IFLA_ADDRESS; RTM_GETADDR returns one RTM_NEWADDR per address with IFA_ADDRESS,
IFA_LOCAL and IFA_LABEL. Anything else gets a bare NLMSG_DONE, because the
caller's next move is a read either way and an unexpected error message is worse
than nothing to read.
The data is not netlink's. Interfaces come from the netdev class and addresses
from lwIP's netifs, exactly as /proc/netif reads them; nothing in the file knows
what an e1000 is. Interface indices matter more than they look -- getifaddrs
matches address records to link records by index, so the two dumps have to
agree. Loopback is 1, netdevs follow from 2.
Verified by reading it back through musl rather than by inspecting the bytes:
lo flags=0x49 fam=-1
eth0 flags=0x1043 fam=17 (AF_PACKET, the MAC)
lo flags=0x49 fam=2 addr=127.0.0.1 mask=255.0.0.0
eth0 flags=0x1043 fam=2 addr=10.0.2.15 mask=255.255.255.0
Correct flags, addresses and netmasks, and the link records pair with the
address records.
One thing this does not close: fastfetch's Local IP module defaults to
default-route-only, which calls ffNetifGetDefaultRouteIfName() and reads
/proc/net/route. SchOS has no routing table and no such file, so the module
still shows nothing -- now for a reason that is about routing rather than about
enumeration. That is the next file to provide.
socktest still passes; the AF_UNIX and AF_INET paths are untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch builds and runs on SchOS:
OS: SchOS 0.1.0 x86_64
Kernel: SchIFT 0.1.0
Shell: sh Terminal: schinit
CPU: AMD Ryzen 7 5700G
Memory: 11.94 MiB / 1016.93 MiB (1%)
Disk (/): 4.64 MiB / 31.25 MiB (15%) - schfs
Here because it is a good acceptance test, not because SchOS needs a fetch
tool. It is ~410 C files somebody else wrote against Linux rather than against
our bugs, and running it exercises procfs, per-process directories, uname,
statfs, getpwuid, terminal detection by walking ppid, and an ANSI renderer all
at once -- which is the shape docs/plan/roadmap.md asked for when the previous
full-stack test was removed.
patches/ is empty and should stay that way. When fastfetch cannot detect
something the answer is to give the system the thing it is looking for, because
every other program looks for the same things. Its first run reported four
misses and they are being worked in that order:
OS: Could not detect OS -> /etc/os-release, this commit
Local IP: getifaddrs() failed -> AF_NETLINK, next
Host: not set by O.E.M. -> DMI in /sys, later
Users: Unable to detect any users -> utmp, a userland convention
Four things the port needs that say nothing about SchOS, recorded in the
Makefile because each cost time to find:
* Every ENABLE_* off. All 29 files calling dlopen are optional detection
modules, and ENABLE_THREADS=OFF removes the single pthread_create -- which
matters, because clone() here does not share an address space.
* -isystem the compiler's own include dir. -nostdinc removes it too, and
cpuid.h is emitted by the compiler with no musl equivalent.
* Linux UAPI headers. musl ships none by design; a musl toolchain is normally
paired with a separate linux-headers install.
* libgcc on the link line, and libc twice -- libgcc pulls symbols back out of
it (__popcountdi2), and a static link resolves left to right.
The toolchain settings are a CMake toolchain file rather than command-line
flags because CMAKE_*_INIT variables are only honoured when the cache is first
created. Reconfiguring an existing build directory ignores them silently.
Also rebuilt musl: build/ports/musl/prefix/bin/musl-gcc had the pre-move path
/home/nexoniarz/Documents/SchOS baked in by configure. The tree does not use
that wrapper -- it links with explicit -I/-L and crt objects -- so nothing was
broken by it, but it was stale and would mislead anyone who found it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Boot died straight after "exiting boot services" with a KVM internal error,
RIP=0x801a5dc5 and RBX=0x80000000 -- the framebuffer base. The bytes at RIP were
0x0C0E13 and 0xD1D5DC: SCH_BG and a grey from the splash's metal gradient. The
machine was executing the picture of itself starting up.
The hand-off to the kernel writes rbx and did not say so:
"mov %1, %%rbx\n\t" <- writes rbx
"jmp *%2\n\t"
: : "r"(PML4_ADDR), "r"(fb), "r"(entry)
: "memory"); <- rbx not declared clobbered
With rbx absent from the clobber list the compiler may allocate an input there,
and clang 21 allocated `entry`:
movq %rax, %cr3
movq %rcx, %rbx <- the framebuffer, into rbx
jmpq *%rbx <- %2 was rbx, and now holds the framebuffer
Declaring "rbx" forbids the allocation. Verified in the generated assembly
rather than by reasoning: jmpq *%rbx became jmpq *%r14, and the machine now
boots through to schinit: ready.
This had been latent since the loader was written. It worked only because every
compiler that had built it happened to choose a different register, and it
surfaced the first time the binary was relinked with a different clang -- which
only happened because the previous commit fixed the Makefile dependency that had
been leaving the loader stale. A stale artifact hides the bug the fresh one
reveals.
It is also the third time this project has been broken by a register the code
depends on but never asks for: docs/history/kernel.md section 4 (the BIOS
loader passing the framebuffer in EAX by luck) and section 8 (%fs:0 used as
scratch when the ABI reserves it). Written up as section 7b, with the one-line
recipe that settles all three -- read the generated assembly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
make falls back to the GNU toolchain when clang is absent, and that works for
the kernel. It does not work for the UEFI loader: BOOTX64.EFI is PE/COFF and
wants clang plus lld-link, so a machine with only gcc gets a kernel that builds
and a loader that silently stays whatever it already was.
That is not hypothetical -- it is what left a stale boot splash on this tree for
half a day. The mask in include/logo.h was the new mark, the kernel drew it, and
the loader kept drawing one compiled months earlier because nothing could relink
it and nothing said so.
shell.nix declares everything docs/guides/building.md lists, and building.md
gains a NixOS section saying why using it matters rather than just how.
Verified: with clang 21.1.8 and LLD 21.1.8 the loader relinks and the splash
draws Shift in metal, screendumped from the framebuffer rather than inferred.
Pinned to the host's nixpkgs rather than a flake input, deliberately. This is a
convenience for a development machine, not a reproducibility claim; if it ever
needs to be the latter it wants a flake and should say so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
PSOGM drew ":(" -- two dots and a parenthesis. It now draws Guru, the icon from
docs/branding/: a chamfered head with two eye knockouts and a flat mouth, in the
:| register.
The old reasoning is kept in the file rather than deleted, because it is the
thing being traded away: ":(" was "legible as a mood without being a picture of
anything, and does not pretend the machine has feelings about what just
happened." That is a real argument and a face is a louder claim. What it buys is
identity -- ":(" is recognisably Microsoft's, and a crash screen is the single
screenshot most likely to leave the machine, so it is the worst place to be
wearing somebody else's face. The octagon also quotes the chamfered corners of
the old SchOS letterforms, which is the only part of that mark still in use.
Still drawn from primitives, for the original reason: it scales with the display
and costs no space in the kernel image. A scanline fill for the head, two
rectangles and one more knocked out of it -- no allocation, no locks, nothing
that can fail halfway, which is the whole constraint of panic context. The
geometry is expressed in the same 200-unit box docs/branding/guru.svg uses so
the two cannot drift without somebody editing a number on purpose.
The eyes and mouth are knocked out of the head rather than drawn on top of it,
which is what keeps them legible small: a hole in a solid reads at sizes a
stroke does not.
Verified by crashing on purpose -- echo c > /proc/sysrq -- and screendumping the
framebuffer through the QEMU monitor. The serial report still says ":(", and
should: Guru cannot be drawn in ASCII, and a mood marker in a log is not the
icon.
Separately, and found by looking at the boot splash rather than at the code:
boot/common/ui.c includes logo.h, theme.h and font.h, and the Makefile rule for
the loader listed none of them. A new logo therefore did not rebuild the loader.
The splash had been drawing a mask compiled six hours earlier while `make`
reported nothing to do, and the only symptom was a boot screen quietly
disagreeing with the kernel about what the logo is. The kernel half never showed
it because those objects are built with -MD -MP and track their own headers.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Shift is the logo, Guru is the icon, SchCotie is the mascot, and the difference
between them is not stylistic. An icon works once, at one size, in one state. A
mascot has to be able to *do* things -- confused, pleased, asleep, seen from
behind -- which is why it costs more and is drawn last. Written down because
this is exactly the kind of decision that gets re-derived badly.
Assets/ becomes docs/branding/, which also fixes two things:
* Filenames had spaces in them, so every reference needed quoting. They are
lowercase and hyphenated now.
* Assets/ held hand-written SVG and generated PNG in one directory, which is
the one rule docs/guides/layout.md states.
The guide records what was previously only in people's heads:
* The constraint everything answers to -- include/logo.h is a 128x128
single-channel coverage mask, so a mark has to survive as a solid shape in
one colour and be recognisable at 24 px. Colour is the last decision, never
the first.
* Guru's purple is load-bearing. PSOGM_BG #4B1D9A is deliberately not the
accent #7C5CFF, and theme.h's rule is that the full-bleed purple belongs
entirely to failure. If Guru appears in accent violet on a sticker, the deep
purple stops meaning "the machine stopped" -- and it is the only colour in
the system that means anything.
* Why shift-mask.svg is a separate file from shift.svg. mklogo.py reads ink as
(255 - luminance) * alpha, so tones survive as coverage and the relationship
inverts: darkest here is brightest on screen. Copying the violet fills would
light the object from below.
* Why a raster is committed beside its SVG. inkscape is not a build
prerequisite, so requiring a vector rasteriser would break the build on most
hosts for a file that changes about once a year.
* That the BSD daemon is copyrighted and SchCotie must be drawn from the
concept rather than from Beastie. A daemon is a Greek daimon and a Unix
background process; neither is ownable. The pitchfork, the sneakers and that
face are.
Format rule: SVG, or PNG at high resolution with no lossy compression, nothing
else. SVG is the source of truth for every mark and a raster is generated from
it, never edited.
include/logo.h regenerates byte-identical from the new path -- only the source
comment differs. The two old wordmark SVGs were deleted outside this session and
are left deleted; their PNGs are kept as superseded-*.png for reference.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A leaf's value area holds variable-length records end to end, so a record begins
wherever the one before it finished -- a multiple of 8 only by luck. The code
reads them by casting a pointer into the block, which tells the compiler they
are aligned when they are not.
That works on x86, which is why it has never shown as a bug, and it is undefined
in C. A compiler entitled to assume 8-byte alignment may emit an instruction
that requires it, and the failure would arrive at a different optimisation level
or on a different architecture looking like filesystem corruption rather than
like codegen. UndefinedBehaviorSanitizer reported 31 of them across obj.c,
objw.c, attr.c and space.c.
Seven types now carry SCHFS_PACKED: dirent_rec, extent, extref, index_rec,
attr_rec, snap and inode. Two of those -- attr_rec and inode -- were never
reported, because schfs_objtest does not reach an unaligned instance of either.
They were latent rather than absent, and casting into a leaf is the same lie
whether or not a test has caught it yet.
NO ON-DISK LAYOUT CHANGED, and that was measured before the annotation was
applied rather than assumed: every one of these already carries explicit `pad`
fields and therefore has no implicit padding, so sizes and member offsets are
identical with and without it. Seven _Static_asserts now pin the sizes, because
a record that silently grows misreads every existing volume from that point on
and looks like corruption rather than like a struct that changed.
schfs_node_hdr, schfs_item, schfs_kptr and schfs_uberblock are deliberately left
alone. The node header is exactly 32 bytes, so the items and key pointers after
it are already 8-aligned, and annotating them would cost byte-wise access on the
tree's hottest paths to fix a problem they do not have.
Verified by reading an image written before the change: schfs_fsck --check
passes on structure, checksums, key ordering, data blocks and derived free
space, and the kernel mounts its own root unchanged.
Also here: mkschfs passed a null pointer to qsort for an empty directory. Every
implementation ignores it when the count is zero; the standard does not say they
have to.
make schfs-check now runs with no sanitizer output at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Started as "fix the ASAN leak in schfs_objtest" and the test turned out to be
the messenger. The allocation map was taken through a palloc callback and there
was no way to return it: no schfs_space_release, and a comment in
schfs_space_init reading "caller frees what was taken" for an API the caller
did not have.
Three separate leaks from that one gap:
* The kernel leaked the entire map on every unmount -- up to 2 MB, at 8 KiB
per GiB of volume -- because kmount_unmount flushed, cleared `mounted` and
walked away. This is the one that matters; the others are test-only.
* schfs_space_init stranded a page on its own error path. npages was raised
only after *both* of a pair of allocations succeeded, so a failure on the
second left the first outside the count -- unreachable to any cleanup that
could later exist.
* schfs_objtest leaked 2121728 bytes in 518 allocations, which is what made
the whole SchFS suite exit non-zero regardless of its assertions.
The map now carries its own pfree rather than taking one at release time, so it
can only ever be freed by the allocator that filled it -- the kernel's pages
come from kalloc and a host tool's from calloc, and the two are not
interchangeable. schfs_vol_open and schfs_vol_format release any map the volume
is already holding before building another, which is what stops a re-open
leaking; struct schfs_vol must therefore be zeroed before first use, and the
header now says so.
The test's own leak was the last one found and the simplest: it does
memset(&VOL, 0, sizeof(VOL)) before reopening, which wiped the map's pointers
before vol_open could release them. Eight of those, each now releasing first.
schfs_objtest asserts the balance -- 520 pages taken, 520 given back -- because
a suite that leaks cannot detect a leak: the filesystem's own allocations would
arrive as noise inside the harness's. The next one fails the run instead.
make schfs-check now exits 0. The 31 UBSAN misalignment reports are still
there and are still a Gate 0 item.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Two failures found by running `make schfs-check` rather than by reading it, both
predating the current work -- confirmed by stashing the session's changes and
re-running to byte-identical output.
* AddressSanitizer: 2121728 bytes leaked in 518 allocations, every one from
md_palloc in tools/schfs_objtest.c, the test's own page allocator. The
target exits non-zero, so the whole suite fails whatever the assertions say.
The cost is not the memory -- it is that a real leak in the filesystem would
now arrive as noise inside 2 MB of expected noise.
* UndefinedBehaviorSanitizer: 31 misaligned accesses across obj.c, objw.c,
attr.c and space.c, one root cause. Records are read by casting a pointer
into a tree leaf, and a record's offset within a leaf is not a multiple of
8. This works on x86, which is why it has never shown as a bug, and it is
undefined in C: a compiler entitled to assume 8-byte alignment may emit an
instruction that requires it, and the failure would then look like
filesystem corruption rather than codegen.
Recorded as Gate 0 items rather than as nice-to-haves for one reason: a suite
that is red for known reasons stops being read, and then it is red for unknown
reasons too. guides/testing.md now says so up front, so nobody reads the [ok]
lines and ignores the exit code.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The network thread waited on the timer and nothing else, so a frame that landed
just after a poll sat in the ring for up to 10 ms -- the largest fixed latency in
the system. That was deliberate when the stack was new (a receive path woken by
an interrupt is much harder to debug than one that is asked) and there is now a
working stack to compare against, which is exactly when it becomes safe to do.
The frame is still *pulled* by the thread through .receive. It has to be: a call
into lwIP can reach the driver, the driver can sleep on the buffer cache, and an
interrupt handler may do neither. netdev_rx_signal() delivers nothing and reads
no ring -- it only ends the wait early.
The wait stays on the timer tick rather than moving to a channel of its own, and
that is the design. lwIP's timers must still run when the link is silent, so the
clock has to remain a floor under the wait, and sleep() cannot wait on two things
at once. Joining the tick's existing wakeup costs nothing and leaves one wait
with one predicate.
rx_signal lives under tickslock for the same reason it gets no lock of its own:
sleep() releases tickslock atomically, so a driver setting the flag and waking
under that lock cannot lose the wakeup by arriving between the predicate test and
the sleep. A private lock would not be held across the sleep, and that window
would be back. Calling it from interrupt context is safe on the same terms the
timer handler already relies on -- acquire() disables interrupts, so a CPU
holding tickslock cannot be interrupted into it.
The e1000 signals on RXT0 (a frame or burst has landed) and RXDMT0 (the ring has
fallen below its threshold, which is when waiting for the clock hurts most).
Measured rather than asserted: /proc/netif reports wake_rx and wake_tick, and
across three pings rx_frames and wake_rx both went 2 -> 6 -- every received frame
woke the thread through the interrupt. wake_tick keeps advancing as the idle
floor, which is what lwIP's timers need. socktest still passes and ping is still
0% loss.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The old logo was a thin monoline wordmark in a ring, with a grey gradient. The
kernel draws include/logo.h as a 128x128 four-bit coverage mask, so hairlines at
that size go ragged, the ring spent most of the area on nothing, and at small
sizes the S read as a 5.
Three marks, because each depicts the thing it belongs to and so they stop
competing:
Shift three slabs, displaced. The layer diagram in
docs/architecture/README.md as a solid object, and the kernel's
name as a shape. Dimensional rather than flat -- the tradition
Paul Rand's NeXT cube belongs to, which is what the architecture
already claims as its model.
Uberblock the SchFS ring: twelve slots, one of them newest. Twelve so the
slots divide 360 exactly; an arbitrary count leaves a part slot
crammed against its neighbour where the ring closes. The newest
is marked by REACHING FURTHER OUT as well as by colour, because
colour is exactly what the coverage mask discards.
Guru the PSOGM face, drawn for reference. Not wired in: panic.c argues
for the ":(" on the grounds that it is "legible as a mood without
being a picture of anything", and Guru spends that. Worth deciding
on purpose.
mklogo.py reads ink as (255 - luminance) * alpha, so tones survive as *coverage*
rather than being flattened -- which means the old grey gradient was not
discarded, it was turned into partial transparency. It also inverts: darkest is
most ink, which the kernel draws brightest. The mask source is therefore a
separate greyscale file with the top slab darkest, or the object would be lit
from below. Two files sharing one geometry is a drift hazard and the desc in
both says so.
The splash gets it for free: ui_logo() shades per row with metal() and the
mask's own tones reinforce that gradient rather than fighting it, so the slabs
come out looking machined.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
setsockopt was `return 0;` and getsockopt wrote a zero for whatever was asked.
The comment said it was so a server setting SO_REUSEADDR and treating failure as
fatal would not fail. That trade is the wrong way round: a caller told "no"
adapts, a caller told "yes" changes its behaviour on the strength of it -- sets
SO_RCVTIMEO and then blocks forever in a read it believes will time out, sets
TCP_NODELAY and reports latency numbers that measure Nagle. The failure is
silent, remote from the call, and indistinguishable from a bug in the stack.
Six options are honoured now and everything else is ENOPROTOOPT. SO_REUSEADDR,
SO_KEEPALIVE, SO_BROADCAST and TCP_NODELAY reach lwIP's pcb; SO_SNDBUF/SO_RCVBUF
are accepted and report the real size on read. SO_REUSEADDR is implemented rather
than refused precisely because of the original comment's concern -- it is the one
option a server really does set and really does check.
accept4 becomes its own table entry rather than an alias for accept. It has to
be: accept takes three arguments, so a shared handler reading a fourth register
reads whatever the caller last left there and invents a SOCK_NONBLOCK out of
stack litter. SOCK_CLOEXEC and SOCK_NONBLOCK are now honoured by socket(),
socketpair() and accept4() -- a dropped CLOEXEC leaks a listening socket across
every exec, and a dropped NONBLOCK has the caller block forever in what it
believes is a poll loop.
ICMP ping sockets: socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP), on lwIP's raw API,
with the callback stripping the variable-length IP header. Only echo replies are
eaten, and that restriction is load-bearing -- raw_input runs before lwIP's own
icmp_input, so consuming every ICMP message would swallow the echo *requests* and
this machine would silently stop answering pings from outside.
Loopback, so 127.0.0.1 is a real destination. LWIP_NETIF_LOOPBACK is the half
that is easy to miss: without it a packet addressed to an interface's own address
goes out of the wire and never comes back. With NO_SYS=1 nothing drains the
loopback queue, so the network thread calls netif_poll_all().
cmd/ping is first-party rather than toybox's, and the reason is a limitation not
a preference: toybox reads replies with recvmsg(2) and wants the TTL through an
IP_RECVTTL control message, and SchOS has neither. recvmsg is item 1 of
docs/plan/foundations.md, where it is wanted for SCM_RIGHTS anyway, and should
not be rushed to make one applet run.
Two bugs found on the way. Every AF_INET socket failed with ENFILE until DHCP
bound, because inet_new() demanded an *address* before handing out a socket and
reported it as "file table overflow"; net_is_ready() (lwIP up) is now distinct
from net_is_up() (DHCP bound). And that bug was hiding a bad test: socktest
asserted "AF_INET is refused, not faked", true when written, false since AF_INET
landed, and green the whole time because the suite runs before DHCP binds and the
ENFILE made the refusal look real. Fixing the kernel is what turned it red.
Verified: ping to 127.0.0.1, localhost, the gateway, 1.1.1.1 and 9.9.9.9, all
0% loss; socktest ALL CHECKS PASSED with ten new checks, including a setsockopt
round trip and an unknown option that must be refused -- a permissive stub cannot
pass both at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Everything created after boot was stamped 1970. know() in SchFS and now_sec() in
the v1 filesystem both returned uptime(), under comments saying the kernel had no
wall clock -- which stopped being true when time_init() started reading the RTC.
The comments outlived the condition they described.
Two errors, and the second is the less obvious: uptime() counts 10 ms *ticks* and
they were being used as *seconds*, so a node created 0.6 s into boot read back as
00:01:00 and the clocks ran a hundred times too fast. Both now go through
wallclock(), which exists precisely so nothing can disagree with gettimeofday
about the time. Confirmed against the RTC line from the same boot.
The occupancy counters are the instrumentation docs/plan/roadmap.md asked for
while hunting the ls -lR hang: inode, file and pinned-buffer counts with a
high-water mark each, maintained at the 0->1 and 1->0 transitions rather than by
scanning, so they cost one increment on a path that already holds the table's
lock.
The peaks are the diagnostic. A live count only describes the moment you looked,
and a reference leak is invisible in it right up until the table is full -- at
which point iget() panics and filealloc() returns 0, which is where the trail
used to go cold.
What they measured: across ten iterations of ls -lR with writes interleaved, 33
execs and 13378 tree descents, inode_peak stayed at 9/200, file_peak at 9/512 and
buf_pinned_peak at 1/256, with the SchFS bracket unlocked throughout. That
eliminates the roadmap's own hypothesis -- "a lock or reference-count leak
somewhere in the *at() paths" -- and the hang did not reproduce. It is very
likely fixed in passing by the *at() dirfd rewrite, the getdents cookie rewrite
or SchFS becoming the root, all of which landed after it was reported.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
uber_valid() answered one question -- valid or not -- and a version mismatch
returned the same as a failed checksum. Those two states need opposite handling:
A damaged uberblock means STEP OVER IT. That is what the 128-slot ring is for,
and the older root is a consistent filesystem. This is crash recovery.
A sound uberblock from a newer format means STOP. Falling back mounts a STALE
filesystem: every commit made since the volume was upgraded is discarded, the
mount reports success, and nobody finds out.
Demonstrated rather than asserted. A forged image with two uberblocks --
(version 1, generation 1, root 129) and (version 2, generation 2, root 130) --
made the old code mount root 129 and exit 0, silently rolling the filesystem
back to before the upgrade.
uber_check() returns BAD / OK / RO / TOO_NEW, and asks its questions in order:
is it ours (magic), is it intact (crc), can we read it (version, features), does
it make sense (root in range). Compatibility is asked before sanity on purpose --
the fields a sanity check reads are only meaningfully placed if the format is one
we know.
Plus feature flags in three classes, which is what stops a version number being a
blunt instrument: compat (ignore unknown bits), ro_compat (mount read-only),
incompat (refuse). The test for which class is one question -- what happens if a
driver that does not know this feature writes to the volume? Nothing -> compat.
Something goes stale -> ro_compat. Something is unreadable -> incompat.
They occupy what was reserved0, so every later field keeps its offset and
existing images -- which have zeros there -- read unchanged. schfs_vol_commit
memsets the uberblock before filling it in, which is why v1 volumes already say
"no features" without having been written by code that knew the field existed.
That trick is available exactly once. Four _Static_asserts now pin the layout.
Verified on forged images: version bump refuses, incompat refuses, blocksize
mismatch refuses, ro_compat mounts the NEWEST root read-only rather than falling
back.
Also here, because they are the same file: SchFS's transaction owner is a pid
alongside the pointer, since a bare struct proc * does not identify a process --
ptable slots are recycled, and an exited owner's pointer compares equal to
whichever unrelated process lands in that slot next, at which point klock() skips
the lock entirely and two callers share one volume's scratch pages. And
schfs_lockinfo(), so /proc/fsstat can report a wedged volume instead of leaving
every path asleep in acquiresleep with no way to ask why.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
int r = lk->locked; // before
int r = lk->locked && lk->pid == myproc()->pid; // after
Seven callers, and every one of them is an assertion of the form
if (!holdingsleep(&b->lock)) panic("brelse");
whose entire purpose is to catch a process releasing a lock it never took.
Answering the weaker question disarms all of them: iunlock() on an inode locked
by another process, and brelse() on somebody else's buffer, both sailed through
and unlocked it underneath the real holder. Two processes then believe they hold
the same inode, and the corruption surfaces somewhere else entirely -- which is
exactly the shape of bug these panics exist to prevent.
Found while hunting the ls -lR hang. It is not proven to be that hang's cause,
and the instrumentation in the next commits says it is probably not. It is a
real defect regardless, and it re-arms the detector that would catch the rest.
myproc() is null on the boot path before the scheduler runs and acquiresleep()
stores 0 for that case, so this compares the same way rather than dereferencing
null. Checked that nothing touches a buffer that early, so the stricter
assertion cannot fire spuriously on boot.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Same disease as the network stack, one subsystem over. kernel/dev/vga.c
was three things wearing one name: the owner of the framebuffer, a
bitmap drawing library, and the text console. Only the first is a
driver, and because they shared a file they shared a prefix -- so
panic.c drew the crash screen with vga_fill_rect, console.c printed with
vga_putc, /dev/fb0 handed out vga_fb_phys, and every one of those files
named a display driver it had no business knowing about.
Split three ways:
- kernel/drivers/gpu/vga/vga_fb.c owns the VBE framebuffer -- the mode
the loader programmed and handed over, the aperture, and the display
class vtable. It is a driver and now lives with the driver that
finds the card on the bus.
- kernel/dev/gfx.c draws: pixels, shapes, glyphs, the cursor, scroll,
the ANSI erase operations. It names no driver. The framebuffer
arrives through gfx_attach_scanout(), so a driver publishes what it
owns and this file draws on it without knowing what it is.
- include/gfx.h is the interface, and says why it is deliberately not
the display class: that one is about frames -- acquire, present,
vblank -- and the crash screen has to work when nothing else does.
main() no longer calls a display driver. platform_register_devices()
takes the framebuffer address and brings up whatever owns it, which is
where driver names belong; kernel/drivers/registry.c is the file whose
entire job is naming every driver in the kernel.
virtio-gpu got the e1000 treatment as well: instances in an array, the
instance hung on dev->priv by an `attached` hook, and every op reading
it rather than a file-static. It refused the second adapter outright
before, which is not hypothetical -- integrated plus discrete is an
ordinary laptop. The VGA driver deliberately has no such hook, and says
so: there is one framebuffer the loader programmed however many
VGA-class controllers the bus turns up, and a second one publishing the
same scanout is the truth rather than a bug.
Private headers moved next to their drivers: include/virtio.h and
include/xhci.h each had exactly one includer. include/ is for headers
the rest of the kernel needs.
Deleted rather than moved: consoleinit() programmed the sixteen ANSI
colours into the VGA DAC and disabled text-mode blink, by writing ports
0x3C0-0x3C9 from the console. The comment three lines above the colour
table already said this does nothing in a 32bpp linear mode -- there is
no palette to index -- so it was both dead and in the wrong file.
Verified, and this is a refactor so the evidence is that nothing moved:
- bootcheck -Fb -Net: 59 [ok], no failures. That covers the console
through every command, /dev/fb0's geometry, writing pixels through
write() and mapping the framebuffer through mmap.
- make crashshot: the crash screen renders exactly as before --
shapes, glyphs, logo and QR code -- which is the whole of gfx.c
exercised at once, in a panic, with the scanout attached by a driver.
- make schcom-test: five pixel assertions from the host oracle still
pass, so the display class and the compositor above it are unmoved.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Nexoniarz