SchOS/docs/architecture/debugging.md

Finding out what the kernel is doing

Every bug in this project used to be found the same way: add a cprintf, rebuild, boot, read the serial log, guess again. That loop is about ninety seconds long and it answers exactly one question per turn — the question you thought to ask before you rebuilt.

What ended it was a real bug. A DMA block was on two allocators' free lists at once, and finding that took several rounds of that loop, because the kernel could not be asked whether two allocators owned the same page. It could not be asked anything.

The kernel had no way to answer a question it was not already compiled to answer.

Three things close that, and none of them is a debugger in the stepping sense.

---

The rule the shape follows

It observes; it does not control. No stepping, no software breakpoints, no stopping the world.

That is not a scope compromise. Half the bugs this kernel actually produces are timing: an interrupt storm at 77,000 a second, a level-triggered line nobody acknowledges, a driver that faults only on its second start, a supervisor that restarts a job fifteen times in forty-five seconds. Every one of those disappears when you halt the machine to look at it.

And the layering rule, which is the circularity rule the display already has, pointed somewhere else:

A debugger that needs lwIP cannot debug lwIP. A debugger that needs a process cannot debug the scheduler. A debugger that needs to allocate cannot debug the allocator.

So the kernel's half is the minimum that works when nothing else does, and everything convenient is a process.

---

Naming an address

tools/ksyms.pl turns the kernel's own symbol table into a table the kernel carries, and ksym_lookup() resolves an address through it. A crash chain used to be nine hex numbers:

    Call chain
      #0  ffff80000010a9d9  panic+0x5f
      #1  ffff80000011e07f  proc_sysrq_cmd+0x99
      #2  ffff80000011e205  proc_write_sysrq+0x6e
      #3  ffff800000130159  procfs_write+0x59
      #4  ffff80000012e566  writei+0x45
      #5  ffff800000128a96  filewrite+0x2ec
      #6  ffff80000016c0fa  sys_writev+0x12b
      #7  ffff80000016986e  syscall+0xf6
      #8  ffff800000100d2e  syscall_trapret

Two link passes, and why two is enough

The kernel is linked twice. Pass one exists to be read; pass two carries the table built from it.

The obvious objection is that adding forty kilobytes to the image moves everything the table describes — which is why Linux's kallsyms needs three passes and a convergence check. .ksym is placed after .text and .rodata, so it cannot move a single address the table records. Two passes, and the second is stable by construction.

Not by assumption, though: the build lists the text symbols of both passes and fails if they differ. A symbol table that is subtly wrong for every address is worse than none, because it produces confident, false answers.

ksym.c reads the table through weak symbols, so pass one — which has no table — still links, and a tree with the generator removed still boots and simply cannot name anything.

---

A log that outlives the kernel

cprintf used to go to a serial line and a screen and then be gone. panic.c said so in its own header: "there is no core dump and no log to go back to."

There is now. Every character that passes through consputc() — which is every kernel message, including the whole PSOGM report — is also appended to a byte ring with a timestamp per line. It is readable as /proc/kmsg.

The ring lives in a region carved out before the page allocator is given anything, and it has a magic header, so a kernel that reboots finds the previous kernel's log still there:

--- boot 1 ---
[     0.00] e820: 1018 MB usable in 7 regions, top 1016 MB (19 entries)
...
[     7.18]   PSOGM -- Purple Screen of Guru Meditation
[     7.18]     Call chain
[     7.18]       #0  ffff80000010a9d9  panic+0x5f
...
--- boot 2 ---
[     0.00] klog: 128 KB at ffff80000053e000, 2162 bytes carried over from the previous boot

Where it lives, and why not where you would put it

The obvious place is the top of RAM, beside the DMA arena. That was the first attempt, and on the reboot the magic came back as ASCII — because the top of usable memory is exactly where the firmware puts its own allocations before it hands the machine over.

It sits immediately above the kernel image instead. end is the same address on every boot of the same build, which is the property a region has to have to be found again, and the bytes just past the kernel are the ones the loader has already committed to leaving alone. No hole has to be punched in the allocator: kinit1's lower bound is a parameter.

The magic and a header checksum mean a region something else has used is re-initialised rather than printed as if it were a log. A reboot that does not preserve DRAM loses the log, and says so rather than showing garbage.

Two properties of the writer are deliberate. It takes no lock — it runs inside consputc(), and a lock there would be a way for the logger to deadlock the thing it exists to report on. And it buffers before it exists: the region is carved after e820_init(), so the handful of lines before that go into a static array and are flushed in, because a log that is blank for the earliest part of the boot is blank for the part that is hardest to debug any other way.

---

Asking a question

/dev/dbg is a conversation: write a line, read the answer.

# schdbg dma
arena  0xffff80003e8ed000-0xffff80003f8ed000
       16384 KB total, 12295 KB free in 3 extent(s), 4088 KB out

  #   base                 phys                 bytes
   0  0xffff80003e8f3000   0x000000003e8f3000      4091904
   1  0xffff80003ecea200   0x000000003ecea200         3584
   2  0xffff80003f0d3000   0x000000003f0d3000      8495104

It is text, not a typed binary protocol, and the reason is that the same bytes have to work at every level — including the one where nothing can allocate, frame a record, or wait for a client to acknowledge anything. A protocol you cannot drive by hand is a protocol you cannot debug. Everything schdbg does is also:

# echo dma > /dev/dbg && cat /dev/dbg

The registry is the point, not the views

A subsystem publishes its state with one line at the bottom of the file that owns the data:

dbg_register("dma", dma_dump, "the DMA arena's free extents");

Nothing central is edited to add one. That is the difference between something that stays current and something that does not — /proc/sysrq is the version that does not, a switch in one file with a letter per action, and after two years it holds three self-tests and no state at all.

View
dma	the arena's free extents, in virtual and physical
mem	the page allocator's free list, and whether it has a cycle in it
proc	every process, with state, size and its mmap bump pointer
vma	every mapping a process holds but does not own the pages of
claims	devices, DMA blocks and interrupts held by userspace drivers
pci	the bus, with each device's command register decoded
sock	the socket table, with buffered bytes and descriptors in flight

all prints every view; help lists them; a view may take an argument, so vma 4 narrows to one process.

Several of those exist because of a specific bug. vma is the table that decides whether exit() frees a page or leaves it alone, and the bug that made this worth building was a DMA block that was never in it. claims shows the three things that go wrong with a userspace driver — a device held by a process that no longer exists, DMA handed out and never returned, an interrupt line left masked with nobody reading it. pci decodes the command register because "is bus mastering actually off?" is a question with a wrong answer that looks fine.

Three ways in, and the one that always works

	Works when
sysrq g	always — every view to the console, no process, no filesystem, no client program
/dev/dbg	there is a scheduler and a filesystem
schdbg	there is a shell

Views run in ordinary process context and may take locks. They must not be called from panic().

---

What it does not do

• It does not step, break, or halt. If a bug genuinely needs a stepper, this is the wrong tool, and that is a deliberate trade rather than an omission.
• No cross-subsystem queries. "Who owns physical page 0x3eceb000?" — the question that would have ended the investigation that prompted all this — still cannot be asked. Each view answers for its own subsystem and nothing correlates them. That is whose, and it is not built.
• No watchpoints. DR0–DR3 are untouched and T_DEBUG maps to SIGTRAP, so "something zeroed my page table, tell me who" has no answer.
• No network transport. The plan puts a TCP bridge in a userspace daemon, deliberately outside the kernel; it does not exist, so the debugger is local or serial only.
• No memory writes, and no way to poke anything. Reading is what finds bugs.
• all truncates at 16 KB and says so. On a busy machine, ask for one view at a time.
• One conversation at a time. The answer buffer is global, so two programs asking at once get one answer each in some order — never half of the other's, but not two independent sessions either.
• No userspace symbolization. The kernel names kernel symbols. A fault in a process still reports a bare address, and resolving it is a host-side job.
• The stack walk stops where the frame pointer stops. getcallerpcs() walks rbp chains, so a trap frame in the middle of a chain ends the walk.
• sysrq g costs you log history. Its output goes through cprintf, so sixteen kilobytes of views push the same amount out of a 128 KB ring.
• No tracing. No static tracepoints, no event ring, no counters. "What happened in the two hundred events before this" is not a question this can answer.

What remains is in ../plan/debugger.md.