docs/plan/ldls.md milestone L3c. ldls/kpi/ implements 41 of 8139too's 94
symbols rather than logging them: register access to a mapped BAR, the PCI
calls to /dev/pci, allocation to mmap and PCIIOC_DMA, register_netdev to
/dev/netdev.
# ldlsd /lib/modules/8139too.ko /lib/modules/btf
found 10ec:8139 at 00:05.0
bar 1 0x0000000081060000 256 mem
calling probe, with 41 of 94 symbols implemented
kpi: mapped BAR 1 -- phys 0x0000000081060000, 256 bytes
kpi: the driver read a MAC off the hardware: 52:54:00🆎cd:ef
netuser: ldls0 is a process now, 52:54:0🆎cd:ef
probe returned 0 after 0 stub call(s)
52:54:00🆎cd:ef is what the machine was configured with. Nothing invented
it: the driver bit-banged the card's EEPROM, serially, through a BAR mapped by
/dev/pci, and handed back what it found. That it matches means the loader, the
relocations, the BTF offsets, the BAR mapping and the register accessors are
all correct at once, which is why it was the thing to aim at. Zero stub calls:
every symbol probe reaches is implemented.
Two bugs, one of them the kernel's.
Mine first: pci_iomap checked a failed mmap for -1 only, while SchOS returns
-errno. It returned -13 as a pointer, the driver took that as its register
base, and the first write landed at 0x4e -- thirteen below where it meant to
be.
Underneath it, the real one. sys_mmap rounds a length up to a page, the only
granularity an MMU has, and pciuser_mmio_ok() compared that against the BAR's
own size. rtl8139's registers are 256 bytes, the request became 4096, and the
answer was -EACCES for a device the process legitimately held. A BAR smaller
than a page could never be mapped at all, and nothing had noticed because the
only consumer until now was virtio-gpu, whose BARs are large. The check is now
against the pages the BAR lies in, and the widening is named where it happens:
a sub-page BAR hands over the whole page, forced by the hardware rather than
chosen.
That is exactly what hybrid.md said a foreign driver would be good for --
"what it asks for is what a foreign driver would ask for too" -- arriving as a
concrete bug rather than a prediction.
kpi_io_ok() now bounds every ioread/iowrite against the mapping pci_iomap
returned. A stray access would otherwise be a page fault with no context, and
with no IOMMU a hosted driver's wild writes have to be caught early or not at
all. It is also what turned the fault above into two lines naming the offsets.
Not done, and said so in the output rather than only in the doc: no frame has
moved. ndo_open is never called and there is no transmit or receive path, so
ldlsd releases the interface instead of leaving it up -- a link that reports
itself up with nothing draining its queue is a black hole, and the stack would
send DHCP into it for ever. Down is the true answer until packets move. That
is L3d, now listed separately.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
H3 of docs/plan/hybrid.md -- "a modeset API, which is the thing an
out-of-kernel GPU driver makes affordable and an in-kernel one never got".
# schmode modes
1280x800 *
1280x720
1024x768
800x600
640x480
# schmode 1024 768
1024x768 ok
Captured off the virtio-gpu head, the frames really come back 1280x800,
1024x768, 640x480 and 1280x800 again, with the checkerboard band showing no
shear at any of them.
Nothing in the kernel changed for this. No syscall on the path has heard of
a scanout: schmode writes a line to a socket and vgpud sends five commands
to the device. The comparison is the point -- the same five commands in the
kernel would have been the same five commands *and a reason to be nervous*,
because a wrong one there takes the machine instead of one process. That is
why the in-kernel driver never grew one: not difficulty, exposure.
The framebuffer is allocated once, at the largest mode, and every smaller
mode reuses it. PCIIOC_DMA has no free -- a driver's blocks come back when
it exits and not before -- so a modeset that allocated would spend sixteen
slots and then the arena, and the failure would look like a GPU bug rather
than like counting. A larger mode is refused and says why.
vgpud used to end in for(;;) sleep(100) under a comment arguing that
building a control socket before there is a compositor to judge it is the
mistake this plan warns about. That was right about a *compositor protocol*
and wrong as a reason to have no socket: a modeset has a consumer that
exists, somebody changing the mode and looking at the screen, and schmode
is small enough to judge an interface this small. What is deliberately not
on that socket is everything a compositor would need -- no buffer
submission, no damage, no vblank -- which still waits, for the original
reason.
H4, the USB eviction, is now the only milestone left on the plan and is by
some distance the largest thing on the register.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Two things, both about the debugger being available at the moment you
actually need it rather than once a shell exists.
**Ctrl-G on the console runs every view.** No filesystem, no /dev, no
shell -- it is the last thing main() sets up before entering the scheduler,
so it answers from early in boot, which is exactly when boot problems
happen. It sits beside the older Ctrl-P, and the difference between them is
the interesting part: procdump() takes no lock at all, deliberately,
because a lock is a way to hang while reporting a hang. The views cannot
follow that rule -- a free list read torn is worse than not read -- so they
take locks, and a lock must never be taken from an interrupt handler that
may have interrupted its holder. The key therefore *requests* and a kernel
thread *performs*. A scheduler too wedged to run a thread will not answer
Ctrl-G; Ctrl-P still will, and that division is the honest one.
**PSOGM says where the report went.** Its closing line used to be an
addr2line command, which the call chain no longer needs -- it prints names
now. What replaced it is the thing nobody would guess:
This report is in /proc/kmsg after a restart.
schdbg, or Ctrl-G on the console, asks more.
PSOGM -- Purple Screen of Guru Meditation
"Restart and read it" beats "photograph this screen" by a wide margin, and
until the log outlived the kernel it was not true. Both panic.c and
graphics.md had claimed in writing that the screen was the only artefact of
a crash; neither says so now. The QR code stays, because it is still the
only channel that works when the machine will not come back at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/debugger.md D3 and D4, which finish the plan apart from the
network transport.
D3 -- `whose <addr>`. The views each speak for one subsystem, which is what
keeps them cheap and current, and it is exactly why none of them can see
the bug that matters: a page on the DMA arena's free list looks fine from
dma.c, the same page on kalloc's free list looks fine from kalloc.c, and
that it is on both is a fact no single subsystem holds.
# schdbg whose 0x3e239000
phys 0x000000003e239000 kernel va 0xffff80003e239000
dma arena, handed out
pcidma slot 2, 0 KB into a 4000 KB block given to pid 4 (vgpud)
mapped pid 4 (vgpud) at 0x000000004000d000 rwu vma[5] no_free
consistent: 1 owner, 1 mapping(s)
Claimants register the way views do -- one line in the file that owns the
data -- so the kernel image, the log region, the arena, the page allocator,
the pciuser DMA blocks and every page table each answer for themselves.
`mapped` is the one no allocator can answer: there is no reverse map, so
vm_walk_user() goes forward over every mapped page of every live process.
Two verdicts are shouted and everything else is reported as fact. More than
one owner means the second allocator to hand the page out is handing out
memory the first is still using -- the H2 bug, which would have printed as
three lines. Free-but-still-mapped means a page will be given away from
under the page tables that point at it. Deliberately *not* a finding: no
owner at all, because kalloc keeps a free list and no record of what it has
handed out, so an ordinary allocated page has nobody to speak for it and
saying otherwise would be the query crying wolf.
D4 -- watchpoints, on the four debug registers that had been sitting unused
since this kernel was written. Armed against the same framebuffer page and
then killing the driver:
watch 0: 0xffff80003e239000 written, 8 byte(s), by stosq+0x1f, pid 12 vgpud
#0 memset+0xba
#1 dma_alloc+0x2e2
#2 do_dma+0x22a
#3 pciuser_ioctl+0x13b
#4 sys_ioctl+0x3c7
#5 syscall+0xf6
The chain is the answer, not the rip. It reports and continues -- a data
watchpoint is a trap, delivered after the store completes, so returning
carries on with the program none the wiser, which is what lets this be used
on a machine that is still running.
Debug registers are per-CPU and there is no general IPI here, so the table
carries a generation number and each CPU reloads from its timer interrupt
when it notices the number has moved: one comparison per tick, one tick of
latency at worst. `watch` prints which CPUs have caught up, because "this
watchpoint is watching" and "this watchpoint is watching one CPU" must not
look the same.
Also fixed while testing: watch_init() was called from mpmain(), which runs
on every processor, so the command appeared in the list once per CPU.
dbg_register() now refuses a duplicate name outright, so the next init that
runs per-CPU fails loudly in the list rather than quietly doubling it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/plan/debugger.md, milestones D0, D1 and D2. What they replace is the
ninety-second loop -- add a cprintf, rebuild, boot, read the serial log --
which answers exactly the one question you thought of before the rebuild.
The rule the shape follows: **it observes, it does not control.** No
stepping, no software breakpoints, no stopping the world. Half the bugs
this kernel produces are timing -- an interrupt storm, a level-triggered
line nobody acknowledges, a driver that faults only on its second start --
and every one of them disappears when you halt the machine to look. And
the layering rule, which is the circularity rule the display already has:
a debugger that needs lwIP cannot debug lwIP.
D0 -- symbols. tools/ksyms.pl turns the first link pass into a table the
second pass carries. Two passes is enough because .ksym is placed after
.text and .rodata, so carrying the table cannot move anything recorded in
it; the build lists both passes' text symbols and refuses to link if they
ever disagree, because a symbol table that is subtly wrong gives confident
false answers. ksym.c reads it through weak symbols, so pass one -- which
has no table -- still links. A crash chain now reads panic+0x5f <-
proc_sysrq_cmd+0x99 <- ... <- syscall+0xf6.
D1 -- a log that outlives the kernel. Every character through consputc()
lands in a byte ring with a timestamp per line, readable as /proc/kmsg.
It sits in a region carved before the page allocator gets anything, with a
magic header, so a kernel finds the previous kernel's log still there --
including the whole PSOGM report. panic.c's own comment said "there is no
core dump and no log to go back to"; that is no longer true.
The obvious place for it is the top of RAM beside the DMA arena. That
was the first attempt and the magic came back as ASCII on the reboot,
because the top of usable memory is exactly where the firmware makes its
own allocations. It lives above the kernel image instead, which is a
stable address across boots of the same build.
D2 -- the introspection registry. A subsystem publishes its state with one
line at the bottom of the file that owns the data:
dbg_register("dma", dma_dump, "the DMA arena's free extents");
Seven views -- dma, mem, proc, vma, claims, pci, sock -- reachable three
ways: sysrq 'g' (always, no process and no filesystem), /dev/dbg (echo a
line, cat the answer), and schdbg. The protocol is lines of text because
the same bytes have to work where nothing can allocate or frame a record,
and because a protocol you cannot drive by hand is one you cannot debug.
struct sbuf moved out of kernel/dev/procfs.c into include/sbuf.h rather
than being written a second time.
Several views exist because of a specific bug. `vma` is the table that
decides whether exit() frees a page, and the DMA ownership bug that made
this worth building was a block that was never in it.
Also fixed, found by building with clang for the first time in a while:
struct iovec was defined in both posix.h and socket.h, and every file that
included both was a redefinition. GCC 15 defaults to C23, which permits an
identical struct redeclaration, so the gcc path never noticed -- while
clang defaults to gnu17 and rejected it, breaking the one toolchain
shell.nix exists to provide and the UEFI loader requires. Both are now
guarded.
D3 (`whose <addr>`, the cross-subsystem ownership query) and D4 (hardware
watchpoints on DR0-DR3) are not built and are described honestly as
missing in the architecture doc's "What it does not do".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
H2 of docs/plan/hybrid.md -- the milestone the plan itself calls the one
that proves the whole idea, and the one that cannot be skipped.
# cat /proc/schinit
1 4 11 os.schos.vgpud
# kill 4
schinitd: restarting os.schos.vgpud
vgpud: claimed
vgpud: pid 8 drew a test pattern from userspace
The test pattern ends in a twelve-block tally of the drawing process's
pid, because a second run that redraws an identical picture is
indistinguishable from a first run that never stopped. Read off the
virtio-gpu scanout across four generations it says 4, 8, 10, 12, and the
DMA arena hands back the same physical address every time.
What it took:
* A halt the kernel can apply to a device it does not understand.
Clearing PCI_CMD_BUS_MASTER is the only one there is, and it has to
happen before the DMA goes back to the arena -- a dead driver's device
keeps reading a framebuffer the kernel is about to give to somebody
else. Claim sets the bit, release clears it; pcitest shows it in a bm
column, with a third state so a failed read is never printed as off.
* A refusal. vgpu_release() asks vga_fb_restore() whether there is a
framebuffer to put the console back on, and declines to hand over the
device if there is not. The rule that the kernel keeps a minimal
driver for everything on the path to a shell is worth writing down
only if something enforces it.
* The DMA arena not being owned by two allocators at once. This is the
bug that stopped H2: freevm() frees every mapped page below PHYSTOP
and the arena is the top 16 MB of exactly that range, so a DMA block
mapped into a driver went onto the page allocator's free list when the
driver died, while pciuser_release_all() handed the same pages back to
the arena. The restarted vgpud asked for its framebuffer, got pages
kalloc() had already given out -- including its own page tables -- and
dma_alloc()'s zeroing wiped them, so it died inside the ioctl on the
return from a syscall whose stack had stopped existing. do_dma() now
records a VMA with no_free set, the way shared memory does.
* One exit status. KeepAlive must restart a driver that crashed and must
not restart one that has looked at the machine and found its device
absent: on hardware with no virtio-gpu that was fifteen spawns in
forty-five seconds, each printing a line to the console, for ever.
SCHINIT_EXIT_NORESTART is 78, sysexits.h's EX_CONFIG. It is not a new
manifest key -- the wait status has always travelled from PID 1 to the
supervisor, and note_exit() simply stopped discarding it.
The milestone's third clause, "the compositor reattaches", is not done
and is not claimed: there is no compositor running. That is recorded in
the plan as a Schcom milestone rather than counted here.
Closes the register row "A released PCI device" in docs/plan/1.0.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The failure this is against is not scope creep. It is abandonment by promotion:
a thing gets built to the point where it works, the next thing becomes more
interesting, and the first is left in a corner -- in the tree, not finished, not
deleted, and not in any list. Enough of those and the tree stops matching its
own documentation.
docs/plan/1.0.md now holds the register, and it is the only place anything
half-built is listed. Four sections, because the kinds are genuinely different:
built and connected to nothing (the text layer, a font from disk, socket
activation, wait_vblank); started and stopped part-way (foundations 2-5, hybrid
H2, Schcom v0, a released PCI device that nothing brings back); named in a "what
it does not do" and still true; and frozen -- scoped, unstarted, not to be
started. The rule is that nothing enters except by being finished or deleted,
and that adding a row requires closing one.
1.0.md already said "two things in flight, never three". It was right and it was
not being followed.
Then the corners themselves, because a register written over a tree full of them
is just a longer list:
- cmd/init is deleted. Nothing had execed /bin/init since initcode.S changed
to /bin/schinit; it was built and installed on every image as an unreachable
fallback, and an unreachable fallback rots rather than saves.
- projects/schwm/ and projects/schde/ are deleted. Both said "to be deleted"
in their own first paragraph, which proves only that a directory marked for
deletion is not deleted by being marked. README-only, no code lost, and the
arguments each made are moved into wayland.md where they are still true.
- projects/schcom/schcom and schcom-demo were tracked binaries. Untracked, and
.gitignore'd.
Three code comments and one document described a boot that has not happened
since 7d44eb7. cons_serial_only starts set, but kmain clears it on its first
lines now, so the splash does not survive the boot and the kernel log is on
screen from the start. That reversal was earned by a Chromebox with no serial
port freezing at boot showing nothing at all, and the comments still argued the
losing side of it.
The site:
- a download page. One ISO, what it has actually been run on -- one machine,
under test -- Ventoy and dd, what the first boot looks like step by step,
and the build if you would rather. The support table names one Chromebox
rather than listing hardware, because one Chromebox is the entire bare-metal
record and a list would be fiction.
- Assets/usb.svg, drawn to the same rule as the other marks: two tones,
geometry only, the accent spent in one place, and that place is the activity
light because it is the part that tells you something is happening.
- Download is in both navs and is the hero's primary action; a closing band
ends the front page on it.
- the uberblock-slots and drivers-outside-the-kernel figures are gone. Three
numbers left, including the fastfetch one, which stays because it is funny.
Two things caught by rendering the pages instead of assuming: .hero p was
beating .filemeta on specificity and the file line was coming out at body size,
and the dd command was one line long enough that the card clipped it at `conv=`
-- a destructive command that can scroll half of itself out of view is a good
way to take somebody's disk. It is two lines now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The site and several documents still described the system as it was before
virtual terminals, the new schinit, the hybrid work and descriptor passing.
docs/architecture/init.md described the wrong program. It documented a single
schinit that parses manifests and supervises jobs, which has not been true since
PID 1 was split: PID 1 forks a supervisor, spawns jobs on its behalf and reaps;
the job table lives in /proc/schinit; a heartbeat runs both ways; and
proc_reincarnate() re-execs PID 1 in place rather than panicking. Rewritten
around what exists, keeping the reasoning that is still load-bearing -- the five
failures of the sibling-init scheme, the escalation ladder, and the three bugs in
the reincarnation path that each had to happen before they were obvious.
docs/plan/init.md is deleted, which is the tree's own rule for finished work and
had not been applied. Fourteen source comments referenced it by part number, so
they are repointed at the architecture doc by section name rather than left
dangling -- a deleted document nobody notices is worse than a stale one.
docs/architecture/devices.md gained the section it has been missing since
/dev/pci existed: what a driver needs from a kernel, why mmap is checked against
the caller's claims, why DMA is a call and not a mapping, and why the write back
after an interrupt is not optional. Also that a released device does not come
back by itself, which is true and was nowhere.
docs/architecture/networking.md gained a descriptor-passing section, and
docs/architecture/README.md's stack diagram gained the two layers and the third
seam it was missing. "Two seams hold the whole thing together" has not been true
since /dev/pci.
docs/plan/README.md said the hybrid work was deliberately last, on the argument
that an interface with no consumer is wrong in ways nobody can see. The argument
was right; the conclusion was not, and the document now says why it changed --
the alternative to a driver compatibility layer is writing a driver for every
device that exists, and the original objection is answered rather than ignored
because SchOS's own drivers are the consumers.
The site: a Hybrid section with the eviction transcript, cards for virtual
terminals, schinit and drivers outside the kernel, and the numbers remeasured
rather than estimated -- 46,961 lines, 207 syscalls. The boot log in app.js is
from a boot taken today, and the lines are trimmed to what the console can show
without clipping, each still a verbatim prefix of real output.
Two small rendering fixes found by looking at the pages rather than assuming:
.console pre's min-height is now scoped to the hero, so a static transcript sizes
to its content instead of reserving eight lines it does not have; and the docs
reader's contents panel strips inline marks from headings, so a heading written
`proc_reincarnate()` no longer carries its backticks into the sidebar.
Every intra-doc link checked; none broken.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
sendmsg/recvmsg with SCM_RIGHTS. Item 1 of docs/plan/foundations.md and
mechanism 1 of docs/plan/hybrid.md, which are the same primitive seen from two
directions: Wayland's wl_shm_create_pool passes a file descriptor with no
integer-shaped alternative, and handing a driver process the device it is
allowed to touch is the same act. Both plans stopped here.
Linux's structures byte for byte -- msghdr, cmsghdr, the CMSG_ macros -- because
the programs that need this are not ours. libwayland and toybox both call
recvmsg with Linux's headers and would not notice a friendlier door.
The delivery rule is the whole design. A batch of descriptors is pinned to the
stream position of the first byte of the message that carried it, and that has
two halves: a reader arriving at that position is handed them, and a reader that
has not reached it is stopped SHORT of it. Leave out the second half and a
program asking for 4096 bytes swallows three messages and is handed one
message's descriptors, with nothing in the result saying which. socktest checks
exactly that: two one-byte messages, an eight-byte read, one byte back.
The kernel holds a reference to every descriptor in flight, so a sender may
close its own copy the moment sendmsg returns. Giving that reference back is the
part that leaks if it is not written down, and there are three ways a message
ends:
- received with room installed in the receiver's table
- received without room, or by
plain read(2) closed; MSG_CTRUNC for the first case
- never received, socket closed closed by sockclose
The middle row looks like a choice and is not: holding kernel references for a
receiver that has proved it is not looking is a leak with extra steps.
No garbage collector. A socket descriptor sent over that same socket and never
received holds a reference to the socket that holds the reference to it, and
neither close reaches zero. Linux carries several hundred lines for this.
Nothing on either plan passes a socket over a socket -- Wayland passes memory,
the driver work passes devices -- so it is a bounded leak that is documented
rather than a silent one.
Fourteen checks in cmd/socktest, and every one moves data through the descriptor
rather than inspecting it. The descriptor passed is always a pipe end, because a
pipe announces its own lifetime: a read of a pipe whose writers are all gone
returns 0, which turns "was the kernel's reference released" -- otherwise
invisible from userspace -- into a value a test can compare.
Two bugs fell out, neither in the new code:
- sockpair() never set the socket's domain, so every socketpair() socket
claimed domain 0. Invisible while the data paths asked only whether a socket
was AF_INET or AF_NETLINK, since zero answers "neither" correctly.
SCM_RIGHTS asks "is this AF_UNIX", and zero is wrong for that one.
- pipe_poll() reports POLLHUP but not POLLIN at end of file, so a non-blocking
read of a pipe whose writers had all gone returned EAGAIN forever instead of
0 -- a program that polls and reads spins waiting for an end that already
happened. sockreadable() always had the equivalent condition; the pipe path
did not. Found because the test helper for "is this descriptor closed" is a
non-blocking read of a pipe.
projects/schcom/README.md said SCM_RIGHTS was done for a long time while nothing
in the kernel implemented it, and an entire GUI plan was drawn on that line.
It is true now, which is not the same as it having been right, and the README
says so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The sweet spot was available the whole time and I ruled it out by writing
"AltGr+anything" when the true statement is "AltGr+*letter*".
A Polish layout wants AltGr with a letter -- ą ć ę ł ń ó ś ź ż. AltGr with a
function key produces nothing on any layout, no window manager binds it, and
no application asks for it. It is the one combination the host, applications
and the keyboard layout all leave alone, and the previous three commits talked
themselves out of it on a technicality that was mine, not the hardware's.
Verified rather than argued, with QEMU sendkey and screendump hashes:
AltGr+F2 -> tty2
AltGr+F1 -> back, pixel-identical to the start
AltGr+a -> reaches zsh, so ą still types
That distinction is only expressible because Right Alt became its own modifier
bit two commits ago. Sharing ALT is harmless for typing -- neither is used to
look up a character -- and made this impossible to say.
Also added, since it was asked for in the same breath: minus and equals step
to the previous and next terminal, on whatever the chord's modifiers are. They
skip terminals that are not in use -- the same `opened` count VT_GETSTATE
reports -- because six terminals with two shells on them means four blank
screens in between, and cycling past those is worse than not having the key.
AltGr+= -> tty2, again -> wraps to tty1 (only two in use)
AltGr+- -> tty2
chvt -c still moves all of it, and `chvt` reports both halves.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Third guess at a chord, and the third one would have been wrong too: a display
manager that grabs Ctrl+Alt+F<n> matches loosely, so Ctrl+Alt+Shift+F2 never
reaches the guest either. Extra modifiers do not get past a loose grab.
The real problem is that this is not knowable from inside. A key the host
swallowed is indistinguishable from a key nobody pressed, so the guest cannot
probe for a free combination, and there is no combination that is free
everywhere:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6 (loosely matched),
Ctrl+Alt+digit (QEMU's own console tabs)
APPLICATIONS want Alt+anything (Meta -- zsh binds Meta-digit as
digit-argument), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter
So it is a setting. VT_SETCHORD/VT_GETCHORD, and in userspace:
chvt -c ctrl+shift+F Ctrl+Shift+F1..F6 (the new default)
chvt -c ctrl+alt+shift+F
chvt -c alt+1
chvt -c off no chord; chvt N is then the only way
chvt report the active terminal and the chord
`off` is a legitimate setting rather than a failure mode. On a machine whose
host grabs everything worth binding, `chvt N` is the honest answer.
The default moved to Ctrl+Shift+F1..F6: display managers bind Ctrl+Alt+F<n>,
not Ctrl+Shift+F<n>, and Ctrl+Shift with a *function* key is not a character
on any layout -- unlike Ctrl+Shift+digit, which is.
Caught while writing it: VTC_RALT was 0x08 while kbd.h's RALT is (1<<7), since
(1<<3) is CAPSLOCK. A chord set from userspace with AltGr would simply never
have matched, and the only symptom would have been a key that does nothing.
A _Static_assert now holds the two headers together.
Verified: Ctrl+Alt+F2 leaves the screen byte-identical, Ctrl+Shift+F2 switches,
Ctrl+Shift+F1 returns to a pixel-identical tty1, and chvt -c round-trips
through alt+1 and off and back. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+1..6 was a worse choice than the Alt+F-keys it replaced, and the reason
is the one that matters: anything the kernel swallows is taken from every
program that will ever run here, permanently.
Alt+<digit> is Meta-digit. zsh's own line editor binds it as digit-argument --
Alt+1 Alt+2 x repeats x twelve times -- and every readline editor does the
same. Yesterday's chord broke that system-wide, which is exactly the failure
mode of picking a chord applications want.
Working the whole space instead of one axis of it:
the HOST takes Alt+F4, Alt+F2, Ctrl+Alt+F1..F6
APPLICATIONS want Alt+anything (Meta), Ctrl+letter, Ctrl+Shift+digit
(Ctrl+Shift+2 types ^@), bare F-keys
the LAYOUT wants AltGr+letter -- Polish diacritics
Ctrl+Alt+Shift+F1..F6 is in none of those sets. Display managers bind the same
chord without Shift, so adding it steps out of the host's way, and no terminal
application binds a triple-modified function key.
Which chords actually reach a guest was measured rather than assumed: a
temporary probe in kbdgetc logged every modified keypress and QEMU's sendkey
fired each candidate at it. Everything reached the guest, Ctrl+Alt+F2
included -- so that conflict is the host's display manager, not QEMU. The same
probe corrected an earlier claim: `sendkey altgr-2` produces no event at all,
so the previous commit's "AltGr+2 did not fire" was never actually tested.
And the escape hatch is real now. VT_SETMODE was accepted and ignored, so a
program could ask to own the chord, be told yes, and still not get it.
VT_PROCESS genuinely stops the kernel switching. Together with the EVIOCGRAB
path -- which kbdgetc already checks before the chord is recognised -- there
are three honest layers: nothing, VT_PROCESS, exclusive grab.
What VT_PROCESS still does not do is the VT_RELDISP handshake; struct vt_mode
carries relsig/acqsig for when Schcom needs to release the GPU before the
screen changes hands.
Verified by screendump hash: Alt+2 reaches zsh as Meta, Ctrl+Alt+F2 and
Ctrl+Shift+F2 leave the screen untouched, Ctrl+Alt+Shift+F2 switches.
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Alt+F1..F6 was wrong in three separate ways, and the third is the one that
matters most here.
Alt+F4 the host window manager closes the QEMU window
Alt+F2 GNOME and KDE open a run dialog
Ctrl+Alt+F1..F6 the host switches its *own* virtual terminals
AltGr+anything Polish diacritics -- a c e l n o s x z with their marks --
and on some setups AltGr is delivered as Ctrl+Alt
Ctrl+Shift+key widely bound inside applications
Scroll Lock not present on many keyboards
Alt+1..6 survives all of it: the number row, so no function key is involved,
and left Alt, so AltGr is untouched.
Right Alt is tracked as its own modifier bit now. It used to share ALT, which
is harmless for typing -- neither is used to look up a character -- and wrong
for chords, because it made AltGr indistinguishable from Alt.
And the test is an equality rather than a mask:
if ((shift & (CTL | SHIFT | ALT | RALT)) == ALT && ...)
`shift & ALT` fired on Ctrl+Alt+1 and AltGr+1 as well, so a chord aimed at the
host -- or an ordinary Polish keystroke -- would have switched terminals
behind your back. That was a real bug in what shipped yesterday.
Verified with QEMU's sendkey, comparing screendump hashes:
start (tty1) 86cee2284878
Ctrl+Alt+2 86cee2284878 identical -- did not fire
AltGr+2 86cee2284878 identical -- did not fire
Alt+2 114562804a78 switched
Alt+1 86cee2284878 back, pixel-identical to the start
schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Three symptoms, two causes, both in the terminal layer.
**The grid and TIOCGWINSZ disagreed about the size.** vt_init() sizes every
grid from gfx_cols()/gfx_rows(), and it runs at main.c:75 -- while the display
driver attaches its scanout from the PCI bus walk at main.c:99. So the grids
were the 80x24 fallback, and TIOCGWINSZ, which computed its own answer live,
said 160x50.
That one disagreement produced all three things visible in the report: text
stopped two thirds of the way down the screen, `ls` laid out 160 columns into
an 80-column grid so words split across the wrap ("vers" / "ion"), and zsh's
cursor tracking was wrong on every line.
Fixed in two places, because either alone would leave the trap set:
gfx_attach_scanout() now calls vt_resize(), so the grids learn the real screen
the moment there is one; and TIOCGWINSZ reports v->cols/v->rows rather than
measuring again. One number, from the terminal being asked.
**Wrapping was eager.** A glyph printed in the last column moved the cursor to
the next line immediately. Real terminals set a pending-wrap flag and wrap when
the *next* glyph arrives -- which is why a line exactly as wide as the screen
takes one row and not two, and why a program can write the bottom-right cell
without scrolling.
zsh's partial-line marker depends on that rule directly: it writes exactly
COLUMNS-1 spaces and expects to still be on the line. With eager wrap it left a
reverse-video '#' above every prompt, which is the hashtag in the report. Both
are gone.
Verified by screendump: `ls /proc` now fits one line with "version" intact, no
markers, and output fills the screen to the last row. schfs-check passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
/dev/tty1..tty6, Alt+F1..F6 or `chvt N`. Each is an independent terminal --
its own screen, cursor, line discipline, foreground process group and
session. Two shells on two terminals are unrelated processes that share a
keyboard and a screen.
What made it possible is a backing store. The console drew straight into the
framebuffer and scrolled by moving pixels, which works exactly as long as
nothing else wants the screen: there was nowhere to put terminal 2 while
terminal 1 was visible, and nothing to repaint terminal 1 from. Each terminal
owns a grid of cells now and the framebuffer shows whichever grid is active,
so vt_switch() is set-index, repaint, return -- nothing is saved on the way
out because the outgoing grid has been current all along.
The rule the layer is built on: a terminal does not know whether it is
visible. Writes land in the grid, the cursor moves, the grid scrolls, all
unconditionally; drawing is one question asked at the bottom of vt.c. Every
alternative spreads "am I on screen" through the escape parser, and then a
terminal switched away from mid-sequence comes back wrong.
Everything that was a single global is per-terminal now: tty_fg_pgrp (deleted),
termios, the input ring, the escape parser, the UTF-8 decoder, and the cursor
-- which also stops being pixels in gfx.c and becomes cells in the terminal.
TIOCSCTTY was `return 0` and now records proc->ctty, which is what /dev/tty
resolves through; /dev/tty was an alias for /dev/console with the same minor,
and they are different questions.
kbd.c names Alt+F1..F6 as KEY_ALT_F1+n, above 0xFF on purpose -- every byte
value is already a character or a UTF-8 continuation, and a chord colliding
with one would be typed into the terminal instead of switching away from it.
What the chord means is decided in console.c, where the terminals are.
VT_ACTIVATE / VT_WAITACTIVE / VT_GETSTATE / VT_OPENQRY, Linux's numbers.
The argument to ACTIVATE is by value, not a pointer -- same shape as TCFLSH.
Two bugs found by screenshotting the result rather than reading the log:
- zsh emits 0x0F to leave alt-charset mode, because that is what the `linux`
terminfo says rmacs is, and the console drew CP437 glyph 0x0F: a sun, in
the prompt, on every line. A terminal never draws a C0 control character.
- SGR 7 was unimplemented, so zsh's partial-line marker rendered as a bare
'#' instead of a reversed block. Reverse video swaps the colours at draw
time, not at store time, so turning it off restores what was underneath.
Verified by screendump: tty1 and tty2 show different screens, and switching
back repaints tty1's earlier content from its grid. schfs-check passes.
docs/architecture/terminals.md, including what it does not do -- no
scrollback, no reflow, no VT_PROCESS mode for a display server to veto a
switch, which Schcom will need before it owns Alt+F7.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A fresh boot spent 2600 ms in schinit's bootstrap() before printing its first
line, and the whole of it was device nodes. Measured rather than guessed: an
instrumented bootstrap reported 2600 ms on a fresh image and 0 ms on the next
boot, because the nodes already existed by then and mknod failed fast. The cost
was therefore invisible to anyone not building images -- which is to say,
invisible to everyone except whoever works on this.
Each node was a real inode on the root filesystem, and SchFS commits every
mutation as its own transaction group: a copy-on-write rewrite of the path to
the root, then an uberblock behind a cache flush. Twenty of those is seconds.
The duplication mattered more than the time. Major and minor numbers are the
kernel's -- devsw[] in kernel/dev/cdev.c is what they dispatch on -- and schinit
held a second copy of that mapping with nothing checking the two agreed. Adding
a character device meant editing a userspace program, and a wrong minor produced
a node that opened successfully and did nothing.
kernel/fs/devfs.c puts the table next to the thing it describes and serves /dev
behind the same fs_ops vtable procfs uses. The namespace is all it provides:
fileread and filewrite see T_DEV and go through devsw themselves, so a read
never reaches it. It is read-only, and dirlink and ialloc answer EROFS rather
than pretending -- a node exists because the kernel has the device, or it does
not exist.
This also makes /proc/filesystems true. It has advertised "nodev devtmpfs" for
as long as it has existed, against a kernel that had no such filesystem.
Two things found while measuring what remained:
* The thirteen mknod() calls for /proc ran *after* the procfs mount, so every
one was resolving a path into a read-only synthetic filesystem and failing.
procfs.c's own note called them a fallback to be cleaned up later; they have
been dead for longer than that.
* The four mkdir() calls for mount points were the rest of it. They are made
by the image builder now (sysroot-install), and the ones in init are a
fallback -- a mkdir that fails because the directory exists costs a path
walk and no writes, where creating one costs a transaction.
bootstrap() is now 0 ms on a fresh image, down from 2600.
init opens /dev/console after the mount rather than mknod'ing a node called
"console" into the root directory, which is what used to leave a stray /console
in `ls /`. The old path is kept as a fallback: if the mount fails there is no
/dev/console and no way to report it.
socktest passes, /proc still lists per-process directories, ps -e still
enumerates.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
"net: eth0 10.0.2.15/255.255.255.0 via 10.0.2.2" arrived on the display seconds
after the prompt did, so the first thing anyone saw after booting was the kernel
typing into their session. It lands wherever the cursor happens to be -- in the
middle of a command, a fastfetch, or later a compositor's output.
console_takeover() hands the framebuffer to userspace on the first exec, and
after that the screen belongs to whoever is using the machine. cons_serial_only
already encodes that rule for the boot path -- "the display is the product; the
serial line is the diagnostics" -- and it starts set for exactly this reason.
What was missing is the rule for messages that cannot be timed to happen before
userspace starts, because they are waiting on a network.
klog() is that: the serial port only, whatever cons_serial_only currently says.
A macro rather than a function, because cprintf's varargs cannot be forwarded --
there is no vcprintf, and adding one to duplicate the formatter would cost more
than it buys. cprintf holds cons.lock for the whole message, so the flag cannot
be observed half-changed by another CPU printing at the same time.
Nothing is lost. The line still goes out the UART, which is where bootcheck
reads it from and where you want it when something is wrong, and a person who
wants to know their address reads /proc/netif.
Verified by screendumping the framebuffer after a boot and two fastfetch runs:
no interruption on screen, still one occurrence on serial.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
Two ANSI bugs, both found by running fastfetch rather than by reading the
parser, and both invisible to anything that spells its escapes out in full.
ESC[m with no parameters means ESC[0m. ECMA-48 is explicit that an omitted
parameter takes its default and SGR's default is 0, and sgr() iterated its
parameter list -- which is empty in exactly that case, so the loop body never
ran and the reset was silently dropped.
Programs emit the bare form constantly. fastfetch writes "\x1b[32m1%\x1b[m", so
everything after the first coloured character stayed green forever. With a
background colour it is much worse: its palette swatch sets a white background
and resets, the reset did nothing, and the console went white-on-white and
stayed there -- filling the screen with white rectangles as it scrolled, which
looks like a corrupted framebuffer rather than one missing branch.
OSC sequences were not a state at all, so ESC ] fell through and the payload
printed as text: a hyperlinked path arrived as "Disk (]8;;file:///\]8;;\)".
Nothing here acts on an operating-system command -- there is no window title and
no hyperlink to follow -- but *discarding* one is not optional, because the
alternative is printing somebody's URL into the middle of their output. ESC \
ends it, and an ESC followed by anything else is handed back to the escape state
rather than eaten, so a malformed OSC does not swallow the sequence after it.
Verified by screendumping the framebuffer after two consecutive fastfetch runs:
identical output both times, near-white coverage down from most of the screen to
2% (the palette swatch's own white cell), and the disk line reading "Disk (/)".
Also installs docs/branding/Ascii/ascii_50.txt as /usr/share/schos/logo.txt --
Shift as characters, at the width that leaves room for an info block on an
80-column console. Installed from the branding directory rather than copied into
sysroot by hand, so there is one source.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
fastfetch reported "getifaddrs(&ifAddrStruct) failed", and the right answer to
that is not a patch to fastfetch. Asking what interfaces a machine has is
something every networked program does, and on Linux there is exactly one way:
a NETLINK_ROUTE socket. musl implements getifaddrs() over it, so a libc call
that looks like a syscall is really a small protocol conversation -- and without
this side of it every caller fails the same way.
kernel/net/netlink.c is a responder rather than a general socket family. No
event stream, no multicast groups, nothing subscribes to link state: a request
arrives, the whole answer is generated into the socket's buffer, and reads drain
it. That shape is chosen, not a shortcut -- getifaddrs sends a dump and reads
until NLMSG_DONE with MSG_DONTWAIT, so generating at send time means a read
never blocks and the non-blocking flag is honoured for free.
RTM_GETLINK returns one RTM_NEWLINK per interface with IFLA_IFNAME and
IFLA_ADDRESS; RTM_GETADDR returns one RTM_NEWADDR per address with IFA_ADDRESS,
IFA_LOCAL and IFA_LABEL. Anything else gets a bare NLMSG_DONE, because the
caller's next move is a read either way and an unexpected error message is worse
than nothing to read.
The data is not netlink's. Interfaces come from the netdev class and addresses
from lwIP's netifs, exactly as /proc/netif reads them; nothing in the file knows
what an e1000 is. Interface indices matter more than they look -- getifaddrs
matches address records to link records by index, so the two dumps have to
agree. Loopback is 1, netdevs follow from 2.
Verified by reading it back through musl rather than by inspecting the bytes:
lo flags=0x49 fam=-1
eth0 flags=0x1043 fam=17 (AF_PACKET, the MAC)
lo flags=0x49 fam=2 addr=127.0.0.1 mask=255.0.0.0
eth0 flags=0x1043 fam=2 addr=10.0.2.15 mask=255.255.255.0
Correct flags, addresses and netmasks, and the link records pair with the
address records.
One thing this does not close: fastfetch's Local IP module defaults to
default-route-only, which calls ffNetifGetDefaultRouteIfName() and reads
/proc/net/route. SchOS has no routing table and no such file, so the module
still shows nothing -- now for a reason that is about routing rather than about
enumeration. That is the next file to provide.
socktest still passes; the AF_UNIX and AF_INET paths are untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
A leaf's value area holds variable-length records end to end, so a record begins
wherever the one before it finished -- a multiple of 8 only by luck. The code
reads them by casting a pointer into the block, which tells the compiler they
are aligned when they are not.
That works on x86, which is why it has never shown as a bug, and it is undefined
in C. A compiler entitled to assume 8-byte alignment may emit an instruction
that requires it, and the failure would arrive at a different optimisation level
or on a different architecture looking like filesystem corruption rather than
like codegen. UndefinedBehaviorSanitizer reported 31 of them across obj.c,
objw.c, attr.c and space.c.
Seven types now carry SCHFS_PACKED: dirent_rec, extent, extref, index_rec,
attr_rec, snap and inode. Two of those -- attr_rec and inode -- were never
reported, because schfs_objtest does not reach an unaligned instance of either.
They were latent rather than absent, and casting into a leaf is the same lie
whether or not a test has caught it yet.
NO ON-DISK LAYOUT CHANGED, and that was measured before the annotation was
applied rather than assumed: every one of these already carries explicit `pad`
fields and therefore has no implicit padding, so sizes and member offsets are
identical with and without it. Seven _Static_asserts now pin the sizes, because
a record that silently grows misreads every existing volume from that point on
and looks like corruption rather than like a struct that changed.
schfs_node_hdr, schfs_item, schfs_kptr and schfs_uberblock are deliberately left
alone. The node header is exactly 32 bytes, so the items and key pointers after
it are already 8-aligned, and annotating them would cost byte-wise access on the
tree's hottest paths to fix a problem they do not have.
Verified by reading an image written before the change: schfs_fsck --check
passes on structure, checksums, key ordering, data blocks and derived free
space, and the kernel mounts its own root unchanged.
Also here: mkschfs passed a null pointer to qsort for an empty directory. Every
implementation ignores it when the count is zero; the standard does not say they
have to.
make schfs-check now runs with no sanitizer output at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The network thread waited on the timer and nothing else, so a frame that landed
just after a poll sat in the ring for up to 10 ms -- the largest fixed latency in
the system. That was deliberate when the stack was new (a receive path woken by
an interrupt is much harder to debug than one that is asked) and there is now a
working stack to compare against, which is exactly when it becomes safe to do.
The frame is still *pulled* by the thread through .receive. It has to be: a call
into lwIP can reach the driver, the driver can sleep on the buffer cache, and an
interrupt handler may do neither. netdev_rx_signal() delivers nothing and reads
no ring -- it only ends the wait early.
The wait stays on the timer tick rather than moving to a channel of its own, and
that is the design. lwIP's timers must still run when the link is silent, so the
clock has to remain a floor under the wait, and sleep() cannot wait on two things
at once. Joining the tick's existing wakeup costs nothing and leaves one wait
with one predicate.
rx_signal lives under tickslock for the same reason it gets no lock of its own:
sleep() releases tickslock atomically, so a driver setting the flag and waking
under that lock cannot lose the wakeup by arriving between the predicate test and
the sleep. A private lock would not be held across the sleep, and that window
would be back. Calling it from interrupt context is safe on the same terms the
timer handler already relies on -- acquire() disables interrupts, so a CPU
holding tickslock cannot be interrupted into it.
The e1000 signals on RXT0 (a frame or burst has landed) and RXDMT0 (the ring has
fallen below its threshold, which is when waiting for the clock hurts most).
Measured rather than asserted: /proc/netif reports wake_rx and wake_tick, and
across three pings rx_frames and wake_rx both went 2 -> 6 -- every received frame
woke the thread through the interrupt. wake_tick keeps advancing as the idle
floor, which is what lwIP's timers need. socktest still passes and ping is still
0% loss.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
docs/ was ten files where a plan, a description, a guide and a bug report all
sat next to each other. It is now architecture/ (what SchOS is), plan/ (what it
will be), guides/ (how to work on it) and history/ (why it is like this), with
an index that states the one rule holding it together: when something is
finished it moves from plan/ to architecture/ and is rewritten as a description
of the thing rather than a record of building it.
A ticked checkbox says the work happened. It does not say what the work
*produced*, and six months later the checkbox is all that is left. The network
stack proved the point: finished, verified end to end, and for a month the only
description of it anywhere was a checkbox four levels of indentation deep.
So roadmap.md went from 534 lines to 181 -- nothing deleted, the done work
graduated. Seven subsystems that were finished and undescribed now have
descriptions: boot, kernel, syscalls, filesystem, networking, graphics, usb,
init. Every one ends with "What it does not do", which is the section that pays;
a document listing only strengths is marketing, and the reader who needs it most
is the one about to trip over a limitation nobody wrote down.
schfs.md still opened with "phases 1 through 3 1/2 are done, phase 4 is next"
long after all five had landed. It is a description now, with the phase record
and the hard-won bugs moved to history/.
Three corrections found on the way, all load-bearing:
* projects/schcom/README.md claimed SCM_RIGHTS was done. There is no
sendmsg/recvmsg in the kernel at all, and an entire GUI plan rested on it.
* The root README said "No TCP/IP" months after the stack landed.
* history/kernel.md sec.7 was marked "in progress" on a problem that process
groups solved.
Also adds plan/1.0.md, which draws a finish line so the open list stops being
infinite, and marks schwm/ and schde/ superseded: in Wayland the compositor is
the window manager, so that split dissolves rather than being abandoned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VQ7Qx8E1q1M1bbCq8QLHS2
The last three phases of the filesystem, which were written together and
touch the same files throughout -- kmount.c, objw.c and vfs.c are each
rewritten by all three -- so they land as one commit rather than three
that could not be built separately.
Durability. A transaction that reaches the platter out of order is worse
than one that never reached it: the uberblock can name a tree whose
blocks are still in the drive's write cache. bdirty/bflush give the
buffer layer an explicit barrier, ideflush issues ATA FLUSH CACHE and
usb_storage_flush the SCSI SYNCHRONIZE CACHE that means the same thing,
and a commit now waits for the data before it writes the root that
points at it. The uberblock groups are read newest-first with fallback,
so a volume whose newest roots are torn mounts at an older one and says
which generations were lost.
Reflink. Extents carry a refcount, so two objects can name the same
blocks and neither frees them while the other holds them. Exposed as
FICLONE -- Linux's ioctl value, so `cp --reflink` works unmodified --
and as cmd/reflink for the case where there is no cp to hand.
Attributes, and the one genuinely new idea here. attr.c stores named
values on an object, reachable through setxattr/getxattr/removexattr at
Linux's syscall numbers. On top of that, schfs_index declares an index
over an attribute name and schfs_query answers "which objects carry this
value" from the B-tree rather than by walking. A query against an
unindexed attribute is refused with an error, never silently answered by
a full scan: a query that quietly becomes a scan is worse than one that
admits it cannot help. cmd/schattr drives both.
Three bugs fixed on the way, each found by the numbers being wrong
rather than by inspection:
- statfs's f_fsid was declared int64[2]. Linux's fsid_t is two *ints*,
so every field after it landed one slot late: userland read f_frsize
out of f_namelen, got 255, and df reported a 32 MB root filesystem
as 1992 KB. It hid for as long as it did because the fields used to
be invented constants, so wrong numbers looked like the usual ones.
- struct inode's nlink was a short against SchFS's uint32, so a file
past 32767 names came back negative -- and iput frees an object
whose count reaches zero. It is an int now, signed on purpose, so an
underflow lands somewhere a check can see rather than wrapping.
- filewrite split every write to fit v1's log. That limit belongs to
the journal, not to writing, and SchFS makes one transaction of
whatever it is handed: a 1 MB write was becoming 170 commits and
170 flushes for nothing. fs_ops carries max_write now, and SchFS
sets no limit.
Also here: a real mount table, so `mount -t schfs /dev/hdb /mnt` shows
up in /proc/mounts -- df looks a path up there before it calls statfs at
all, so a mount missing from that list was invisible to it -- several
volumes mounted at once, snapshots mounted by name, and /proc/fsstat
with an rdtsc-based counter, which is the only instrument fine enough to
see inside a single syscall.
Verified: `make schfs-check` passes in full, including the sweep that
crashes the volume at each of 119 points mid-transaction and requires
every one to mount with exactly its committed data, and the case where
both newest uberblocks are rubbish and the volume still comes back. The
headless boot check passes with 27 [ok] and no failures, on a SchFS root.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
boot/bios/ now holds the MBR, the El Torito stub and the real-mode stage
2; boot/uefi/ is empty and documented.
Separate directories rather than #ifdefs, because the two share almost
nothing. A BIOS loader lives in 16-bit real mode, reaches the firmware
through software interrupts, and walks itself up into long mode. A UEFI
loader is a 64-bit PE that the firmware has already placed in long mode
with paging on, calling services through a table of function pointers.
What they do share is the hand-off contract, which boot/README.md now
writes down: ELF segments placed, long mode, a 24-byte-entry memory map
at E820_MAP_ADDR, framebuffer geometry at VBE_INFO_ADDR.
That contract is the point of documenting it now. UEFI's GetMemoryMap
returns EFI_MEMORY_DESCRIPTORs, and the right move is to translate them
into the entries kernel/arch/x86_64/e820.c already parses rather than
teach the kernel a second format.
Build output paths under $(BUILD)/boot are unchanged; only sources moved.
tools/windows/ .ps1 (pwsh, so usable from Linux and macOS too)
tools/posix/ .sh
tools/python/ .py
tools/ .c and .pl
The .c and .pl files stay at the top level because they are not
host-specific: the build compiles or invokes them on every platform.
Call sites updated in the Makefile, ports/mk/port.mk, docs and the
project memory. The one thing that does not survive a move on its own is
a script deriving the repo root from its own location -- all nine
PowerShell tools used Split-Path $PSScriptRoot -Parent, and memory-sync.sh
used dirname/.., both of which quietly become tools/ one level deeper.
Two levels now.
Two pre-existing Windows failures surfaced while verifying, both real and
neither caused by the move:
- schfs_fsck.c did not compile under mingw at all: --extract uses
POSIX mkdir(path,mode), symlink() and link(), none of which mingw
has. That took the whole tool with it, and `make schfs-check` with
it. mkdir maps to _mkdir; symlink and link fail loudly rather than
writing a regular file in their place, because an extracted tree
that differs from the image while reporting success defeats the
point of --extract.
- the round-trip test then failed at `ln -s`, since Git Bash cannot
create symlinks without developer mode. It skips with a message now.
Not a fudge: mkschfs's mingw build cannot see a symlink either, so
the test would have compared a tree with none against an image with
none and called it a pass -- coverage reporting itself as present
while being absent.
Verified on Windows: build clean, all seven bootcheck suites green,
make schfs-check passes.
Removes the "-unix" element and with it any trademark exposure to The
Open Group.
The split follows the ecosystem layout: SchOS is the system, and the
kernel has its own name. Kernel-identity strings are the only places
that take SchIFT -- uname(2) sysname, /proc/version, and the two licence
sentences that say "kernel" outright. That is what every Unix does here:
`uname -s` on Linux reports the kernel, not the distribution. Everything
a user reads as the product -- panic screen, boot menu, error prefixes,
docs, LICENSE, NOTICE -- is SchOS.
schunix.img is schos.img, the logo assets and the musl TLS patch are
renamed, and __SCHUNIX__ is __SCHOS__ (the define and the patch that
consumes it moved together).
Two things the rename broke, both found by the bootcheck suite:
- shmtest wrote "SCHUNIX-MMAP-OK" with a hardcoded length of 15 and
compared it back by hand-counted offsets (m[3]=='U', m[14]=='K').
The shorter marker left the write running two bytes past the literal
and the compare reading past the data, failing a file-backed mmap
that was working correctly. Now written and compared through one
constant with sizeof.
- bootcheck asserted a 31-byte file after appending to
"hello-from-schunix"; the shorter string makes it 29.
Both are the same mistake: a string literal whose length is written out
somewhere else. Full suite green -- base, Tty, Ps, Sock, Fb, Usb, Evdev.
An x86-64 operating system built from xv6, now largely rewritten: SMP,
a copy-on-write root filesystem (SchFS), PCI/USB/virtio drivers, a TTF
rasteriser, and a Linux-numbered syscall ABI.
No history before this point -- the tree was never under version control.
This commit exists so the rename that follows has something to undo to.
Nexoniarz